Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions Gbsdjt E Nw Topfx Acwok

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting Gsdouqk Azjpfx Acwjbk 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW - Manual body lifting - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm Gedpfx Aeyyyd Nscwobk - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Gjdpfox U Tymsx Acwobk Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: good (used), 15 kW motor Cutting height 8 cm Cutting width 40 cm Roller length 4 m x 2 Working width of rollers 43 cm Gbodpfx Aceyzxfuewek

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Motor power: approx. 12 kW • Saw blade speed: adjustable approx. 3,500–5,800 rpm • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction Gedpfeyyxxfox Acwobk Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Gsdpfx Acsw Sy T Hewjbk

Condition: used, Year of construction: 2009, Cutting length: 4200 mm Cutting width: 3200 mm Max. saw blade protrusion: with blade vertical at 0° = 70 mm with blade tilted at 45° = 50 mm Feed speed forward: 0-80 m/min. Feed speed reverse: 100 m/min. Weight: approx. 5400 kg. Motor power: 14 kW Scoring saw: 1.5 kW Tool: diameter: 350 mm bore: 30 mm Extraction port (bottom): 140 mm Extraction port (pressure beam): 100 mm Storage location: Supplier Gbedpfx Aeyf Nu Tjcwjk

Condition: used, machine/vehicle number: MR000798, Used circular saw with right-side extension and rear outfeed table. Technical specifications: - Maximum cutting width to rip fence: 1250 mm - Maximum saw blade diameter: 450 mm - Saw blade tilting range: 0–45° - Maximum cutting height (at 90 degrees): 130 mm Gbjdpfeyzw Hqox Acwsk

Condition: ready for operation (used), Year of construction: 2012, Panel saw manufactured in 2012. This SCHELLING FH 4 features a nominal cutting length of 4250 mm and a maximum saw blade diameter of 350 mm. It offers a feed speed of up to 80 m/min and is equipped with an ARDIS software package for enhanced functionality. Includes a storage grundner. If you are looking to get high-quality panel cutting capabilities, consider the SCHELLING FH 4 machine we have for sale. Contact us for further details. Panel dimensions • Length: 2000–4100 mm • Width: 300–2100 mm • Thickness: 6–60 mm Gbedpjyyw U Sefx Acwsk • Panel thickness tolerance: -0.2 to +0.2 mmMachine specifications • Nominal cutting length (Saw Machine 430): 4250 mm • Main saw blade diameter (max): 350 mm • Scoring saw blade diameter: 300 mm • Max saw blade clearance above table: 95 mm • Max package height: 80 mm • Strip aligner alignment force: 400–2000 N/piece • Max clamp opening: 90 mm • Working height: 970 mm • Overall height: 2070 mmDrives and speeds • Main saw motor power: 15 kW • Saw unit feed speed (forward): 5–120 m/min • Saw unit feed speed (reverse): 120 m/min • Feed speed (forward): up to 80 m/min • Feed speed (reverse): up to 80 m/min Additional equipment • Panel storage system (Manufacturer: Grundner) • Length: 24.90 m • Width: 14.17 m • Stack height: 2 m • Lifting height: 2.10 m • Max panel size (L x W): 4.20 x 2.10 m • Min panel size (L x W): 1.80 x 0.60 m • Max lifting capacity: 250 kg • Horizontal drive power: 2.2 kW • Horizontal travel speed: approx. 120 m/min • Vertical travel speed: approx. 40 m/min • Panel material: suitable for vacuum gripping technology • Connected load: 6 kW • ARDIS software package

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Gbodpfoxvc N Dex Acwjk Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130 Gsdpfx Acjxvc Rzjwsbk

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Gbjdpfevnq H Eox Acwjk Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations Gedpoukhd Aefx Acwsbk

Condition: excellent (used), O04024) AUTOMATIC BOARD STORAGE SYSTEM for PANELS - SIRIO Gbjdpfjwrz Dbex Acwjk Total Space Required (with panel saw) mm 10000 x mm 47000 (ca.) Mobile upper bridge (on X-axis), with mobile carriage (on Y-axis) and relative vacuum suction cup assembly (mobile on Z-axis) max. speed Mobile upper bridge (on X axis) 150 m/min (ca.) moving carriage speed (on Y axis) 150 m/min (ca.) vacuum suction cup group speed (mobile in Z axis) 60 m/min (ca.) Vacuum suction cup group, 90° rotating Automatic management system (by scanner) of the cut panels (but remaining in the warehouse) O04025) PANEL SAW WITH REAR LIFTING TABLE Mod. FH 6 430 Numerical Control MCS Evolution. Software SIEMENS WinAC RTX Rear pushers (N.) 1 Twin Pusher - DUPLUS2. With No. 12 clamps / grippers Max. cutting width (mm) 4300. Useful stroke of the pushing system (mm) 4300 Max. blade projection (mm) 135 Scoring Unit (max. diameter saw) mm 200 Main Sawing Unit (max. diameter saw / power) mm 460 / Kw 21 Turning device (rotating unit) at 90° Adjustable speed of the saw carriage (m/min) 1 - 150 No. 5 Front supporting tables with Air blowing system Total power (Kw) 33 (ca.)

Condition: excellent (used), Casolin panel saw with scoring unit, 2004, table length 2000 mm Gsdpfxsyyuvgj Acwobk

Condition: used, functionality: not functional, load capacity: 2,000 kg, Rotator ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Limited operational capability Technical Condition: Spare parts donor Gbjdsyzvmpspfx Acwok Description: ISO 2A (41 cm), capacity 2,000 kg, 180° rotator, width 1,100 mm, ID OS1949

Condition: used, Year of construction: 2021, only 24 operating hours – like new Base machine 1 pc Cutting technology meets the future The CONTROL series has always defined its own class – the premium class for vertical panel saws. But even this lead never stands still. We have developed the CONTROL into a vertical panel cutting centre of the premium class, with higher automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and new machine software provide improved user comfort in every detail. Saw Frame • Precision manufacturing to 1/100 mm in key components • Massive, self-supporting welded saw frame with high torsional rigidity • Full-surface support panel made of birch plywood with integrated small parts shelf • Auxiliary stop profile with its own tape measure and 3 auxiliary stops for repeat cuts • Automatic detection of the center support • Automatic roller lock during the cutting process Saw Beam • Stable, durable steel saw beam construction • Automatic saw beam locking with cut position detection Saw Unit • Play-free, smooth-running guides • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced operator comfort thanks to largely automated operation • Laser-assisted display of horizontal cuts • Automatic clamping of the motor carriage • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for quick change to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control System • 12" touchscreen computer with optimal user guidance • Multilingual user interface • Tool database for high flexibility and absolute repeat accuracy • Fully automatic sawing process • Variable feed speeds from 10–25 m/min • Selectable saw cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity Dimension Adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Design, Ergonomics • STRIEBIG’s signature product design Gedpfx Aceyyqz Sewobk • Multiple awards (including the Swiss Design Award) • Functionality and operator-friendly ergonomics Installation • Wall-mounted or free-standing (option) installation possible Note: Permissible ambient temperature: min. +5°C / max. +40°C Relative humidity: 19–95% If mains voltage fluctuations exceed ±10% of the nominal voltage at the installation site, a voltage stabilizer must be used. Type 5216 Cutting range 4300x2160/2016x80mm 1 pc Cutting length: 4300 mm Cutting height vertical cut: 2160 mm Cutting height horizontal cut: 2016 mm Max cutting depth: 80 mm Min cutting depth (automatic feed): 4 mm Min cutting depth (manual feed): 2 mm Exact installation dimensions can be found in the brochures or installation diagrams. ProLock Easy-Fix tool clamping system 1 pc Electronic positioning system "EPS-X" (horizontal axis for vertical cuts) 1 pc Paper holder 1 pc Small parts support, aluminum (2 pieces) 1 set Kit for free-standing installation (Types 5168, 5216, 5224, 6168, 6216, 6224) 1 set Storage location: Customer

Condition: used, Year of construction: 2020, saw blade diameter: 600 mm, cutting height (max.): 200 mm, total length: 8,000 mm, total width: 2,000 mm, Push-feed crosscut saw, equipped with a 4-meter pusher, cutting height: 30 to 200 mm, cutting width: 300 to 580 mm, pusher capacity: 350 kg. Gbedpfx Acoyzrb Ajwsk

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, saw blade diameter: 360 mm, Raimann ProfiRip KM310 Multi-blade Saw Gbedpfox E Ug Aox Acwok Track width: 330 mm Maximum saw blade spacing: 310 mm Cutting height: 120 mm Sleeve diameter: 80 mm Passage width: up to 650 mm Feed speed: up to 35 m/min Electrically adjustable saw shaft height Saw blade size: 280-360 mm Quickfix rapid-change system Motor power: 30 kW CE certificate Year of manufacture: 2007

Condition: good (used), functionality: fully functional, Double mitre saw ALFAMACCHINE T350 Gbedpfx Acsyyna Ejwjk Double saw for 45-degree angle cuts Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3,000 rpm Motors: 2×1.5 kW Air requirement: 5–7 bar Cutting width: 15–80 mm Cutting height: 10–80 mm

Condition: used, Used bandsaw, price ex works. Gbsdswx Rp Hspfx Acwek

Condition: good (used), functionality: fully functional, OMGA Radial 700 Radial Arm Saw Max cutting width at 90°: 700 mm Max cutting height: 110 mm Saw unit adjustable for angle in two planes Gbjdpoyym Afefx Acwsk Saw blade speed: 3000 rpm Main motor power: 2.61 kW Pneumatic feed of the saw unit

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Gsdpfxoyymtde Acwjbk Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting dimensions 4300x4300 mm Cutting height 95 mm Beam feed with grippers 90 m/min Cutting speed up to 150 m/min, steplessly adjustable Main motor power 13.5 kW Gedeylbdtjpfx Acwebk Scoring saw motor power 2.2 kW Saw blade diameter 350 mm 4 air tables Extraction requirement 3800 m³/h Overall dimensions 6500x7700 mm