Used Heavy-duty shelves for sale (156)

7 Stück Kragarmregal-Ständer einseitig Höhe 5,2 m / Tiefe 1,2 m / Länge 11,5 m

€4,550

Heavy duty shelf with 4 levels

Call

total length: 1,150 cm, total height: 520 cm, shelf height: 5,200 mm, support length: 1,200 mm, shelf length: 11,500 mm, carrying capacity per cantilever arm: 900 kg, load capacity per stand: 2,700 kg, overall weight: 1,285 kg, Condition: as good as new (ex-display), Year of construction: 2021, Cantilever rack in hot-dip galvanized design from exhibition: Nla79iqvg Scope of delivery: 7 rack uprights height 5.2 m, base section 1.2 m usable depth with tire protection 21 cantilever arms with 1.2 m usable depth with angle deflector (suspension system) Longitudinal and diagonal braces for 11.5 m shelf length (spacing 1.9 m) Fastening material (screws, nuts and washers) Net price: € 4,550.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Shelf height 5,200 mm - Load capacity per upright 2,700 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 cantilever arms per upright (can be hooked in) with angle deflector (= 4 storage levels) - Load capacity per cantilever arm 900 kg - Including longitudinal and diagonal bracing for 1,900 mm spacing - Shelf length = 11,500 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can be made in approx. 1 week after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

more

Listing

Bad Laasphe

18,516 km

Eigenbau

Call

Condition: good (used), Heavy duty shelf with 4 levels Bzdiyyw7 Dimensions: L x W X H = 3000 x 900 x 2000 mm Shelf load steel beams 1700 kg shelf load shelves v0n 350 - 500 kg

more

Listing

Borken

18,513 km

Shelf Racking Storage Racking

SSI Schäfer

€9,160

Heavy duty racking Pallet racking High bay racking

Call

Condition: excellent (used), Shelf rack with stacker crane Viakom 500 I9i82f9yo Bay width approx.: 130 cm bay depth: approx. 60cm height: approx. 6m total length approx. 28m Load capacity compartment 200kg bay: 2800kg More shelves in other sizes - new and used - you can find in our store! International shipping costs on request!

more

Listing

Hamburg

18,241 km

Superbuild SUPER 6

€38,650

Call

total length: 46,000 cm, shelf height: 8,500 mm, support length: 3,600 mm, carrying capacity: 12,000 kg, load per truss pair (max.): 3,000 kg, Condition: excellent (used), Year of construction: 2010, Pallet racking from the manufacturer: Superbuild Metalsistem, model: SUPER 6. The offer includes: 125x uprights (bolted framework) 8.5mx100cm (heightxdepth) and 800x beams 360cm. This results in up to: 2100 Epal spaces and approx. 460 linear meters of shelving. Bay load 12t and shelf load 3000kg. Smaller quantities are always possible, simply send us your inquiry and requirements. H0podrb0r Very good condition, checked annually & repaired if necessary. Optional accessories such as upright or double-row collision protection and pallet transfer stations also available. Price incl. VAT. Already professionally dismantled and packed, loading by our team with forklift truck. Delivery possible throughout Europe for an extra charge.

more

Listing

Budapest

17,968 km

46 running meters pallet rack

SSI Schäfer Palettenregal PR 600

Call

support length: 2,760 mm, load capacity: 800 kg, frame height: 10,600 mm, Condition: excellent (used), The frames are available in the following heights: 10,600 mm Color: galvanized The crossbars are available in the following lengths: 2,760 mm INP Color: blue Load capacity: 800 and 1000 kg/pallet If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: D7sz8e0 Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale!

more

Listing

Aumühle

18,322 km

Jungheinrich MPB

€2,960

EXW ONO plus VAT

Call

Condition: excellent (used), 46 running meters of Jungheinrich type MPB pallet racking Used goods in very good condition, see pictures height 3,9 m depth 110 cm, blue Field load 8.4 tons Beam length 2.7 m yellow Beam with load / compartment 2400 kg Negotiated price: € 2.960,-- net ex stock Offer consists of: + 17 pre-assembled frames, depth 110 cm, height 3.9 m + 64 beams, length 2.8 m, 2400 kg load per compartment Befetey + 128 pcs. suspension locks + 68 concrete anchors Load plates, documents etc. are included as standard. Further accessories can be found in the accessories catalog. Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

more

Listing

Zagreb

18,247 km

heavy duty shelf

FAMI Combi NC

Call

Condition: as good as new (ex-display), Functionality: fully functional, Shelves for CNC tools Gmimik

more

Listing

München

18,491 km

Unbekannt unbekannt

€300

Call

Condition: excellent (used), approx. 30 pull-outs / pull-out frames for pallet racking - second-hand - : Price per piece ex location: only 300.- € (net)! B0bdho79 Manufacturer: unknown Type: unknown Year of construction: unknown Load capacity: unknown, we estimate at least 600kg Condition: very good Available: from approx. beginning of December 2023 Location: Munich

more

Listing

Kragarmregal einseitig Höhe: 4.160 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Bad Feilnbach

18,479 km

Kragarmregal einseitig Höhe: 4.160 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

€2,430

Heavy duty racking Pallet racking High bay racking

Call

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 4,160 mm with foot section 1,200 mm effective depth 12 cantilever arms with 1,200 mm effective depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4.160 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Yqd0qpp - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

more

Listing

Hamburg

18,241 km

Superbuild SUPER 6

€3,300

Grid shelves, grid support

Call

total length: 3,400 cm, shelf height: 8,500 mm, support length: 3,600 mm, carrying capacity: 12,000 kg, load per truss pair (max.): 3,000 kg, Condition: excellent (used), Year of construction: 2010, Pallet racking from the manufacturer: Superbuild Metalsistem, model: SUPER 6. Smaller or larger quantities are always possible, simply send us your inquiry and requirements. The offer includes: 10x uprights (bolted framework) 8.5mx100cm (heightxdepth) and 54x beams 360cm. This results in up to: 144 Epal spaces and approx. 34lfm of shelving. Bay load 12t and shelf load 3000kg. L3xaauuvj9 Very good condition, checked annually & repaired if necessary. Optional accessories such as upright or double-row collision protection and pallet transfer stations also available. Net price plus VAT. Already professionally dismantled and packed, loading by our team with forklift truck. Delivery possible throughout Europe for an extra charge.

more

Listing

Budapest

17,968 km

Call

Condition: excellent (used), You buy here mesh shelves for pallet racks ideal for 1100 mm frame depth and fits for 2700 mm and 3600 mm crossbars also. 890*1100 mm, 600 kg/m2 If you need shelves or accessories in other compositions or designs, please contact us. I3vbxkk22x We offer a comprehensive program of new and used shelves and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

more

Listing

Siziano

18,776 km

Pallet Racking

Jungheinrich

Call

Condition: good (used), Jungheirnch Pallet Racking MArca Jungheirnch Huni No. 74 shoulders 8500x1000x80 welded No. 600 beams 2700x100 capacity 1800 kg 2jr8yxn already disassembled ready to load

more

Listing

Schwerlastregal / Schubfachregal Kassetten-Schubfachregal

Marienheide

18,542 km

Heavy duty shelving / bar storage

Schwerlastregal / Schubfachregal Kassetten-Schubfachregal

€5,490

Call

load capacity per storage section: 2,000 kg, total length: 640 cm, total height: 180 cm, total width: 210 cm, shelf height: 100 mm, shelf length: 6,160 mm, load capacity: 12,000 kg, carrying capacity per cantilever arm: 2,000 kg, Condition: excellent (used), Year of construction: 2020, Drawer shelf for rods / tubes / profiles Load capacity approx. 2,000 kg per shelf Completely galvanized - Space-saving storage of bar material - Can be loaded by crane or by hand - 6 drawers with a load capacity of approx. 2,000 kg each Dmtnxn Height: 1,800 mm Width: 6,400 mm Depth: 2,100 mm Sold without warranty and without contents.

more

Listing

Prien am Chiemsee

18,455 km

Schäfer

€360

Call

Condition: used, Shelving traverse length 2.76m B2of8pgkcs Type N4 90 pieces Price per piece 4,00 Euro

more

Listing

4 Stück Kragarmregal-Ständer einseitig Höhe 3 m / Nutztiefe 1,2 m / Länge 4 m

Bad Feilnbach

18,479 km

Cantilever racks used

4 Stück Kragarmregal-Ständer einseitig Höhe 3 m / Nutztiefe 1,2 m / Länge 4 m

€2,230

Call

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) By2jzhxi - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

more

Listing

Bielefeld

18,420 km

dexion

€4,000

CIF Fixed price plus VAT

Call

Condition: ready for operation (used), Year of construction: 1982, Meters of heavy-duty shelving ideal for storing heavy parts. For collection only E2l3dlpuj

more

Listing

Köln

18,584 km

Shelving system

SSI Schäfer R 7000

€125

Pallet racking with storage shelves

Call

Condition: good (used), approx. 470 bays shelf racking system, SSI Schäfer, approx. 4,30m, 300kg / floor - used - : Price for complete purchase ex site: only 35.000.-€ (net), disassembled, packed and loaded = only 74,50 € (net) / bay! Price for purchase of individual fields with approx. 8 shelves / field: only 125.- € (net)! For sale are also: Gratings: 210 pieces (1,09m x 0,84m x 2,9cm) Chipboard: 187cm x 179cm x 2,9cm As well as 2 elevators! E2l3fhi Frames could ev. also be shortened to other heights! Manufacturer: SSI Schäfer Type: R7000 Year of manufacture: 1991 Shelves: Dimensions: approx. 1m x 0,50m Type: ZB 4533 Load capacity per shelf: 300kg Number of shelves: approx. 4.200 frames: 472 pieces Height approx. 4,30m - the frames come from a plant which is approx. 8,69m high! Shelf load: 300kg bay load: 6.000kg Condition: used Available: immediately Location: Cologne

more

Listing

Cento

18,620 km

USED PALLET RACK

Jungheinrich

Call

Condition: good (used), STREAMLINE YOUR WAREHOUSE Ljedktvi8x OPERATIONS WITH JUNGHEINRICH LOTTO

more

Listing

Budapest

17,968 km

Pallet racks

Jungheinrich T Type/Thyssen

Call

Condition: used, Frame: 6600*1100 and 7100*1100 mm Crossbars: 3600*150 mm 3T/slot If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Ppqe7 Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

more

Listing

Wiefelstede

18,341 km

unbekannt 14.000/925/H4800 mm

€1,850

Call

Condition: used, Pallet racking, heavy duty racking, high racking, plug-in racking, storage rack stand -Pallet racking: Heavy duty racking with storage shelves -Depth: approx. 890 mm Wdii7xek -Height: 4800mm -Stands: 6 pieces 4800/925/145 mm -Cross braces: 20 pieces 2775/60/200 mm -Shelves: 10 pieces 2575/90/65 mm -Price: complete -Transport dimensions: 4800/925/H505 mm / 2575/890/H695 mm -Total weight: 1031 kg

more

Listing

4 Stück Kragarmregal-Ständer einseitig Höhe 2,6 m / Nutztiefe 1 m / Länge 4 m

Bad Feilnbach

18,479 km

Cantilever rack used

4 Stück Kragarmregal-Ständer einseitig Höhe 2,6 m / Nutztiefe 1 m / Länge 4 m

€1,790

Call

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 2.600 mm with foot part 1.000 mm Bb2felr 12 cantilever arms with 1,000 mm depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 2.600 mm - Load capacity per upright 1.800 kg - Base and cantilever arms with 1.000 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

more

Listing

Neukamperfehn

18,359 km

Shelf f. Shelf racks

SSI Schäfer R 3000

€9

Pallet racks 800kg/Pal high rack

Call

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Shelf technical data: Shelving system: SSI Schaefer Type: R 3000 Included in delivery: 01x Shelf, II. choice (new goods). Bgqenivci9m Article: ZB 4313 L Material color: gray dimensions: 994 x 300 x 30 mm weight | pcs.: approx. 2,640 kg max. load per shelf 100 kg with evenly distributed load Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

more

Listing

Tatabánya

18,028 km

Schäfer Regale (2516)

Call

Condition: good (used), Stand frame: 6800x1000mm Profile: 80mm Stock: 95 pieces Price: 190 € / piece Bdv0l9jp Beam : Length: 2700 mm Profile : 80×40 I-beam Stock : 1156 pcs Price: 35 € /pce

more

Listing

00071 Pomezia RM, Italia

18,564 km

shelving for picking

MARCEGAGLIA

Call

Condition: excellent (used), Year of construction: 2015, INDUSTRIAL SHELVING SYSTEM FOR DOCUMENT ARCHIVING prompt delivery We have a picking shelving system for heavy loads. Marcegaglia brand n° 1000 shoulders 10000x1200 mm n° 25000 beams 2900 mm Cjnysioqam n° 12500 shelves 2900x1200 mm Material equal to NEW

more

Listing

Budapest

17,968 km

Pallet racks

Jungheinrich Delta/Hubertus

Call

Condition: good (used), Frame: 7100*1050 mm Crossbars: 2800*140 mm 3 T/slot If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Gygpt8 Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

more

Listing

Weißenhorn

18,572 km

Bito Shelf beams L= 2.7m - 5 to.

Bito

Call

Condition: excellent (used), for sale are shelf beams for the shelf system from the leading manufacturer Bito 2700 mm bay width for 3 pallet spaces 5000 kg load capacity per pair of beams CE profile approx. 170x50 mm delivery possible against surcharge We will be happy to advise you by phone or directly on site. Stock: 500 pieces Price on request Invoice will be issued. Bj29tahy8a

more

Listing

Kragarmregal einseitig mit Dachträger Höhe 4,2 m / Tiefe 1,2 m / Länge 11,5 m

Bad Feilnbach

18,479 km

Cantilever rack special item!

Kragarmregal einseitig mit Dachträger Höhe 4,2 m / Tiefe 1,2 m / Länge 11,5 m

€5,910

Approx. 19,70lfm H: 450 cm Pallet racks

Call

Condition: like new (used), Year of construction: 2022, Cantilever rack with roof girder: hot-dip galvanized bolted system 8mftmfyvm2 Scope of delivery: 7 shelf uprights height 4,200 mm with foot section useful depth 1200 mm 21 cantilever arms with 1,200 mm useful depth, standard 7 roof girders with 1,500 mm projection pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for roof superstructure) Including longitudinal and diagonal bracing for 1,900 mm stud spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright 3,850 kg (minus local wind and snow load) - Load capacity per cantilever 900 kg - Load capacity per roof girder 885 kg with 1,500 mm roof projection - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright with depth 1,200 mm, standard = 4 storage levels on top of each other - Including longitudinal and diagonal bracing with 1,900 mm center distance - Shelf length: 11.500 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

more

Listing

Wietmarschen

18,445 km

Nedcon

€2,765

150 running meters pallet rack

Call

Condition: new, Year of construction: 2021, Data : - Color stand : blue - Color crossbars : orange P8mct - load : 3000 Kg per truss pair - high quality workmanship - made in EU - Racking for longitudinal storage of euro pallets - 63 pallet spaces (incl. floor spaces) - floor + 2 storage levels - the rack uprights are disassembled - new goods Nedcon Shelf consists of : - 08 x frame approx 450 x 110 cm - 28 x crossbars 270 cm - 56 x safety pins for crossbars Price: 2765,00 € net 3290,35 € gross You will receive an invoice with VAT.

more

Listing

Aumühle

18,322 km

Jungheinrich Typ MPB

€8,990

EXW ONO plus VAT

Call

Condition: excellent (used), 150 running meters of pallet racking Jungheinrich type MPB used goods very good condition, see pictures height 3,9 m depth 110 cm, blue field load 8,4 tons beam length 2,7 m yellow Beam with surcharge / compartment 2400 kg Negotiable price: € 8.990,-- net ex stock Offer consists of: + 52 pcs. frames pre-assembled, depth 110 cm, height 3,9 m +204 pcs. girders, length 2,8 m, 2400 kg load/shelf +408 pcs. suspension locks +208 pcs. concrete anchors Load plates documents etc. are self-evident. Further accessories can be found in the accessories catalog. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. Baejeegzle (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock).

more

Listing

Cento

18,620 km

NEW SHELVING READY FOR DELIVERY

S.G.A. SRL

Call

Condition: new, Year of construction: 2023, NEW SHELVING READY FOR DELIVERY Prices are on request, but discounts can be obtained for large quantities. N° 200 SHOULDERS 12000X1000X100 15/10 CAPACITY 9000 KG N° 3000 RUNNERS 2700X125X50 CAPACITY 3180 KG n° 1000 CURRENTS 2700X100X50 CAPACITY 1800 KG SINGLE LOTS FOR SALE CUT TO MEASUREMENT OF THE SHOULDER HEIGHT ACCORDING TO YOUR NEEDS: Bypycpwr 3000X1000 4000X1000 5000X1000 6000X1000

more

Listing

Budapest

17,968 km

Slide-through safety devices 2700, 1800 mm

Call

Condition: like new (used), Ideal for trusses 2700 mm and 1800 mm. If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you in your planning. L0rli3k0s Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

more

Listing

Weißenhorn

18,572 km

Gratings for pallet racks

Call

Condition: excellent (used), Gratings / support shelves for pallet rack for 180, 270 and 360 cm rack bays Data: - Grating levels for 180, 270 and 360 cm shelving bays. E0sxn2w32 - Internal 7rk2qmiqq - Dimensions per grating : L:88 cm , W: 110 cm - mesh : 3,5 cm x 3,5 cm - varnished - Second hand - good condition. - From stock - Price per piece in net -MULTIPLE AVAILABLE!!! We put together your desired shelf. Please contact us. We can also deliver your shelf on request For questions just call or write.

more

Listing

4 Stück Kragarmregal-Ständer einseitig Höhe 3,5 m / Nutztiefe 1,2 m / Länge 4 m

Bad Feilnbach

18,479 km

Cantilever rack used

4 Stück Kragarmregal-Ständer einseitig Höhe 3,5 m / Nutztiefe 1,2 m / Länge 4 m

€2,310

Approx. 19,70lfm H: 600 cm Pallet racks

Call

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.500 mm with foot part 1.200 mm 12 cantilever arms with 1.200 mm useful depth, standard Burca0znkz Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.500 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

more

Listing

Wietmarschen

18,445 km

Nedcon

€3,879

STOW trusses 2700, 1800 mm

Call

Condition: new, Year of construction: 2021, Data : - Color stand : blue - Color crossbars : orange - load : 3000 Kg per truss pair - high quality workmanship - made in EU B7e8vlblcz - Racking for longitudinal storage of euro pallets - 84 pallet spaces (incl. floor spaces) - floor + 3 storage levels - the rack uprights are disassembled - new goods Nedcon Shelf consists of : - 08 x frame approx 600 x 110 cm - 42 x crossbars 270 cm - 84 x safety pins for crossbars Price: 3879,00 € net 4616,01 € gross You will receive an invoice with VAT.

more

Listing

Budapest

17,968 km

STOW

Call

Condition: like new (used), ONLY trusses available: Fbklt0g 2700*120 mm 800 kg/slot load capacity 2700*80 mm 800 kg/slot load capacity 1800*80 mm 800 kg/slot load capacity If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

more

Listing

Weißenhorn

18,572 km

Pallet rack high bay cantilever arm

Call

Condition: excellent (used), Sell Pallet racking heavy duty racking high racking cantilever racking all manufacturer sizes and designs. Shelf uprights - shelf frames: - from 1.8m to 8m height Lo83rzt - from 0.7m to 1.5m depth - Painted or galvanized Trusses: - following lengths in stock: 1.5m 1.8m 2m 2.25m 2.7m 3m 3.2m 3.6m - Loads up to 3 tons - Painted or galvanized Shelves and gratings in all types and sizes We put together your desired shelf. Please contact us. Contact Firewood Blum, Tel. 0173-7052196 We can also deliver your shelf on request If you have any questions, just call or write.

more

Listing

Kragarmregal einseitig Höhe: 3.000 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Bad Feilnbach

18,479 km

Kragarmregal einseitig Höhe: 3.000 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

€2,230

approx. 14 running meters, H: 500cm, pallet racks,

Call

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.000 mm with foot part 1.200 mm effective depth 12 cantilever arms with 1,200 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized B8v7i2abol - Shelf height 3.000 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

more

Listing

BLT PR50/101 CA. 14 LFM, H: 500CM, FACHLAST: 4500 KG,

Wietmarschen

18,445 km

BLT PR50/101 CA. 14 LFM, H: 500CM, FACHLAST: 4500 KG,

€2,940

STOW pallet rack 9.30m high, 800kg/pallet

Call

Condition: new, CA. 14 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKS, HEAVY DUTY RACKS, HIGH RACKS, INDUSTRIAL RACKS, RACKS IMMEDIATELY EX STOCK Data : Rg2w7 H : ca. 500 cm D : ca. 110 cm L : approx. 14 running meters Load : 4500 kg shelf load Stands in galvanized trusses 270 x 15 x 5 cm, T45 Trusses in orange Brand new BLT PR50/101 manufactured in Europe & tested according to current standard DIN EN 15512. 100% quality at the best price. Shelf consists of : 06 x upright approx. 500 cm x 110 cm, disassembled. 30 x crossbar approx. 270 x 15 x 5 cm, T45. 60 x safety pins. Levels: Floor + 3 60 pallet spaces incl. floor spaces. -- IMMEDIATELY MULTIPLE AVAILABLE-- Price : 2940,00 € net plus legally valid VAT. You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 €/net per piece.

more

Listing

Budapest

17,968 km

Stow

Call

Condition: like new (used), Year of construction: 2017, Prices ex site disassembled, packed and loaded: Frame height: approx. 9,300 mm frame depth: 1,100 mm frame width: 100 mm Cross beams: Max. Pallet weight: 800 kg 2700*120 mm 2700*80 mm 1800*80 mm grid support: 600 kg/m2 Size: 895*1100 mm Accessories anti-slide-through devices 2,700 mm Slide-through protections 1,800 mm Floor rails (stacker): 50*50*8 mm 2,000 running meters If you need racks or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used racks and accessories and will be happy to assist you in your planning. Shipping: Please inquire about freight costs, stating your zip code and city, as well as the desired item quantity. 99ttik8lwt Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

more

Listing

Kragarmregal einseitig Höhe: 2.600 mm Nutztiefe: 1.000 mm / Länge: 4.000 mm

Bad Feilnbach

18,479 km

Kragarmregal einseitig Höhe: 2.600 mm Nutztiefe: 1.000 mm / Länge: 4.000 mm

€1,790

Pallet racks, heavy duty racks,

Call

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 2.600 mm with foot part 1.000 mm effective depth 12 cantilever arms with 1,000 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 2.600 mm - Load capacity per upright 1.800 kg - Base and cantilever arms with 1.000 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing 8mf2ym029v - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

more

Listing

Wietmarschen

18,445 km

SSI Schäfer Regalanlage, PR600, P100

Call

Condition: good (used), SSI Schaefer PR600 racking system , P100, pallet racking, heavy duty racking, high bay racking, industrial shelving, racks Data : Cyohx8wt07 Volume approx. 19,000 pallet spaces Year of manufacture : 2008 / 2016 Available from : KW29 Frame height : ca. 10,0 m - 11,0 m frame depth : ca. 1,05 m Cross beam : approx. 2,70 m ( level 1 CE140/40 , rest CE100/40) shelf load : min. 2400 kg Price : On request Transport : Delivery will be done by our partner forwarding company, the cost depends on postal code. Assembly : Our trained personnel will be happy to assist you with the professional assembly and disassembly of your factory equipment, if required. OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING OFFER TAILORED TO YOUR NEEDS.

more

Listing

Budapest

17,968 km

Pallet guide

verschiedene

Call

Condition: good (used), These pallet guides for your pallet racks ensure that pallets, mesh boxes and containers are stored safely and stably at every rack level. Simply integrate the robust pallet supports into your racking system. For frames with 1100 mm depth and 50 cm crossbars thickness. Still available: ideal for frame depth 1910 mm and 1410 mm Type: right- and left-sided and middle position. It is perforated so you can attach it to trusses. If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grating, rear wall grating, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Bwr8bgntyx Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

more

Listing

Kragarmregal einseitig Höhe: 3.500 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Bad Feilnbach

18,479 km

Kragarmregal einseitig Höhe: 3.500 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

€2,310

approx. 5,70 rm, H: 250cm, pallet racks

Call

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 3.500 mm with foot part 1.200 mm effective depth 12 cantilever arms with 1.200 mm effective depth, standard Including longitudinal and diagonal bracing for 1,300 mm spacing Fastening material (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 3.500 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. 072mnahg The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

more

Listing

Wietmarschen

18,445 km

BLT PR25

€560

SSI Schaefer PR300 INP 2700 mm trusses

Call

Condition: new, Year of construction: 2022, approx. 5,70 rm, H: 250cm, shelf load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, racks immediately from stock Data : H : approx. 250 cm D : ca. 110 cm L : approx. 5,70 running meter load : 3000 kg shelf load Stands in galvanized trusses 270 x 14 x 5 cm, T30 Crossbars in orange Brand new BLT / PR25 manufactured in Europe & tested according to current standard DIN EN 15512. 100% quality at the best price. Shelf consists of : 03 x upright approx 250 cm x 110 cm, disassembled. 08 x crossbar approx. 270 x 14 x 5 cm, T30. 16 x safety pins. Levels: Floor + 2 18 pallet spaces incl. floor spaces. Y0ovpdj -- IMMEDIATELY MULTIPLE AVAILABLE-- Price : 560,00 € net plus legally valid VAT. You will receive an invoice with VAT. The pre-assembly of the frames can be done for a small surcharge of 12.50 € / net per piece by us.

more

Listing

Budapest

17,968 km

SSI Schäfer PR300

Call

Condition: good (used), Here we sell only trusses, without frame. Trusses: INP 2700*80*40 mm (2400 kg/slot) Lzygtvxce If you need shelves or accessories in other compositions or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you in your planning. Other accessories such as: Ppqe7 Frame, corner and collision protection, push-through protection, chipboard, grating, rear wall grating, depth bars available. Shipping: Please inquire the freight costs by stating your zip code and city, as well as the desired item quantity. Further service offers: Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

more

Listing

Kragarmregal einseitig Höhe: 4.200 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

Bad Feilnbach

18,479 km

Cantilever rack from exhibition!

Kragarmregal einseitig Höhe: 4.200 mm Nutztiefe: 1.200 mm / Länge: 4.000 mm

€1,990

approx. 100,16 rm, H: 550cm, pallet racks

Call

Condition: like new (used), Year of construction: 2022, Cantilever rack in painted finish (RAL 5010 gentian blue): Scope of delivery: 4 shelf uprights height 4,200 mm with foot section 1,200 mm effective depth 12 cantilever arms with 1.200 mm useful depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (bolts, nuts and washers) - (*Next delivery or collection can take place in week 33) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: 1.990,00 € plus VAT. Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Shelf height 4.200 mm - Load capacity per upright 2.200 kg - base and cantilever arms with 1.200 mm useful depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard 0vpfkzum - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. Delivery can be made in approx. 5 - 6 weeks after receipt of order. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

more

Listing

Wietmarschen

18,445 km

BLT PR55

€14,930

Call

Condition: new, Year of construction: 2022, ca. 100,16 lfm, H: 550cm, shelf load: 3000 kg, pallet racks, heavy duty racks, high racks, industrial racks, racks immediately from stock Data : H : ca. 550 cm D : ca. 110 cm L : approx. 100,16 running meter load : 3000 kg shelf load Stands in galvanized trusses 270 x 14 x 5 cm, T30 Crossbars in orange Brand new BLT / PR55 manufactured in Europe & tested according to current standard DIN EN 15512. 100% quality at the best price. Shelf consists of : 37 x uprights approx 550 cm x 110 cm, disassembled. 216 x crossbar approx. 270 x 14 x 5 cm, T30. 432 x safety pins. Levels: Floor + 3 432 pallet spaces incl. floor spaces. -- IMMEDIATELY MULTIPLE AVAILABLE-- Price : 14.930,00 € net plus legally valid VAT. Fpmmyulwc You will receive an invoice with VAT. The pre-assembly of the frames can be done by us for a small surcharge of 12.50 €/net per piece.

more

Listing

4 Stück Kragarmregal-Ständer einseitig Höhe 4,16 m / Tiefe 1,2 m / Länge 4 m

Bad Feilnbach

18,479 km

Cantilever rack used!

4 Stück Kragarmregal-Ständer einseitig Höhe 4,16 m / Tiefe 1,2 m / Länge 4 m

€2,430

CA. 8.4 LFM, H: 500 cm,PALETTE RACKS,

Call

Condition: like new (used), Year of construction: 2022, Cantilever rack used: screw system in hot-dip galvanized finish Scope of delivery: 4 shelf uprights height 4,160 mm with foot section 1,200 mm effective depth 12 cantilever arms with 1,200 mm effective depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4.160 mm - Load capacity per upright 2.250 kg - Base and cantilever arms with 1.200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard Stmez8 - Technical advice by telephone - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed sensibly to allow easy unloading. In case of outdoor installation, the load bearing capacity is reduced by the wind and snow load. The substrate must be concrete, level and dowel-ready, and capable of supporting the acting loads. Ground conditions and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The shelf uprights must be anchored to the floor by the customer; anchoring to the wall is not necessary and not recommended. According to the Employer's Liability Insurance Association, it is recommended that the rack uprights have at least 500 mm projection to the top edge of the upright on the uppermost storage level.

more

Listing

BLT PR50/101 ca. 8,4 lfm, H: 500cm, Fachlast: 4500 kg

Wietmarschen

18,445 km

BLT PR50/101 ca. 8,4 lfm, H: 500cm, Fachlast: 4500 kg

€1,840