Hydraulic feed drive unit

für PAUL KME 2 und BM

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm Ljdpfx Adsh Ellzekorw 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Lodpju Uh T Defx Adkorw Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: new, functionality: fully functional, mileage: 1 km, power: 19.12 kW (26.00 HP), fuel type: diesel, color: grey, overall weight: 2,300 kg, lifting power: 1,600 kg/m, lifting height: 1,950,000 mm, tire size: 31x15.5-15, emission class: euro4, mast type: simplex, digging bucket width: 14,200 mm, Year of construction: 2024, operating hours: 1 h, Equipment: additional headlights, all wheel drive, cabin, differential lock, hydraulics, low noise, pallet forks, standard shovel, trailer coupling, WCM -L2.3 Attachments: ground bucket + dipperstick Engine: Kubota D1703 diesel 3 cylinder Engine power: 26 hp Hydraulic flow: 46.8 L/min Extra function flow: 46.8 L/min Standard tire size: 31 x15.5-15 Drive: 4wd Driving speed: 16 km/h Extra functions: 2 front / 1 rear Overflow connection available, front and rear Lift capacity: 1600 kg Max lifting capacity: 2000 kg Net weight: 2300 kg Width: 1320 mm Lrsdpfx Astzbhijdkow Bucket width: 1420 mm

Condition: used, Year of construction: 2007, No. 3177 Optimizing cross-cut system Grecon Dimter OptiCut 200-1 Used, year of construction 2007 For cross-cutting fixed lengths Wood dimensions to be processed: Input lengths min./max. 3000 - 5000 mm Input widths min./max. 80 - 200 mm Input thicknesses min./max. 38 - 80 mm Timber cross-sections max. 200 x 50 Final timber length min./max. 700 - 1000 mm Average number of cuts / board 5 Wood types: Softwood or hardwood Performance of the system: Feed speed max. 180 m/min, infinitely variable Time per cross-cutting process incl. brakes 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m coupled with feed motor of the saw Item 2: OptiCut 200-1 automatic cross-cut saw in left-hand design With built-in length measuring wheel and built-in blow-out device for waste Graphics-capable input terminal, 1 / 4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control The machine is fed from the left Pos. 3: Outfeed conveyor belt / sorting station with drive unit, without ejector Belt length approx. 1.5 m Lrjdpfx Aou Atmuodkew Machine already dismantled and stored The infeed table was not used by the previous owner. 2 feed rollers were installed for the material feed. The conveyor table is there, only the rubber belt is missing. Sale on behalf of customer, ex location Austria, without transportation and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Year of construction: 1999, condition: used, The DSG 200 vertical sawmill is an ideal option for carpentry shops specializing in furniture and wood flooring, it is efficient and performs effectively. A used Wintersteiger mini wood sawmill is a very good investment, a big plus of this machine is that it doesn't take up as much space as standard devices of this type, and at the same time it is great for processing raw material. It is used for cutting individual pieces and fitting them to the appropriate size. Operation of this device is not particularly complicated and can be learned quickly. The biggest advantage of our sawmill is its rich equipment, which includes, first of all, a saw sprinkler system, controlled from the panel, which allows precise cutting of wet raw material. It has an independent control for adjusting the height of the upper rollers, which makes it possible to set the height of cut faster. Pneumatic pusher to assist the feed TECHNICAL DATA: -Total power 27.3 kW -Air Jet system motor 2.3 kW -Siemens control panel -Propulsion up to 2m/min -Stroke of traction frame 210 mm -Stroke count 400/min -Cutting height, continuously (steplessly) adjustable on our frame 45-250 mm -Maximum cutting height possible is 400 mm ! -Cutting width with side pressure 80-205 mm -Block length min. 250 mm -Lam thickness from 1.5 mm - depending on the type of wood and cutting height -Blades used : 0,9-1,1 mm -depending on cutting height -Length approx. 5000 mm -Width approx. 1300 mm -Height approx. 2600 mm -Weight : 5000 kg Pneumatic pusher to assist the feed Lsdpfxjtvm Hdj Adksrw We add to the machine: -complete large saw frame , -small saw frame, -frame pins, -clamps for stretching the frame, -saw attachments, -wet cutting saws, -dry cutting saws , -a set of top pull rollers, - 4 pcs of bottom pull rollers, -complete sliders, -frame yokes, -pocket cutting guides , -loading magazines, -DTR documentation -electrical diagram

Condition: good (used), 10,000 pieces Inserted gratings Gratings for pallet racks galvanized Inlay grids in different sizes, mesh sizes, load-bearing bar and weight load available: Negotiation price: from € 15,-- net per m² from stock Larger quantities on request! Insertion grid Mesh width Load bearing bar Load bearing bar direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99,5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm Lrsded Hvvbopfx Adkew 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Second-hand, very good condition, see pictures. Goods are in stock. Transportation possible on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations Schnel

Condition: used, WRAVOR WRC 1050 AC – Power, Precision, and Reliability in Wood Processing Looking for a band saw that combines power, precision, and efficiency? The WRAVOR WRC 1050 AC delivers all that – and more! This horizontal band saw is designed for serious wood processing professionals, yet it remains a reliable and versatile solution even for smaller workshops. _____ Key Benefits: High Efficiency: Exceptional productivity with cutting capacity of up to 30 m³ in an 8-hour shift, with minimal energy consumption and low maintenance costs. Ljdowfq Naspfx Adksrw Precise Cutting: Thanks to advanced technology and a stable construction, the WRAVOR WRC 1050 AC ensures clean and accurate cuts – even with the toughest types of wood. User-Friendly: Intuitive controls, fast installation, and easy adjustments make this saw ideal for both industrial applications and individual craftsmen. Versatility and Durability: Built from high-quality materials, this machine is capable of processing various wood types – from soft to hard, solid, or composite. Smart Technology: An innovative control system automatically adapts to different working conditions, saving both time and resources. Eco and Energy Efficient: Low energy consumption reduces operational costs while being environmentally friendly. _____ Specifications: • Model: WRC 1050 AC • Motor Power: 30 / 37 / 45 kW • Cutting Capacity: up to 30 m³ / 8h • Maximum Log Diameter: Ø 1050 mm • Applications: industrial wood processing, carpentry, cutting of pallets, beams, solid wood, and more _____ WRAVOR WRC 1050 AC – Your Partner in Every Cut! For more information or a quote, contact us today.

Year of construction: 2025, condition: new, Multifunctional screening plant SBS 1520 F3 developed from more than 30 years of experience and already sold more than 650 pcs. Sand screening, cable sand making, compost screening, construction waste screening, recycling material screening, topsoil screening, excavation screening, wood chips screening, gravel screening, coal screening, scrap screening,slag screening, humus screening, asphalt screening, milled material screening Standard version - according to the following technical description: 1 screening box with feed hopper and 2 screening decks Screening deck according to your requirements Lrsdsgmibvepfx Adksw 1 unbalance motor 1 rubber screen brake 1 side discharge belt 1 box as machine frame incl. forklift lug and crane eyes 1 additional chute at the feed hopper, to extend the screening area ----- 8 steel springs for optimum screening and screening intensity ----- 1 control cabinet with FI circuit breaker, emergency stop button and phase inverter for turning the screening direction Technical data: 2 deck screening plant upper deck: 2000 x 1500 mm lower deck: 2000 x 1500 mm 3 - fractions weight : 1500 kg Drive : 400 V / 1,1 kW / ( 16 A ) Transport dimensions: Width : 1550 mm / with belt 2000 mm length : 2850 mm Height : 2680 mm Conveyor belt 0,75 KW length : 2900 mm Width : 300 mm You are welcome to visit and test the screening plant at our stockyard in Rodgau Weiskirchen.

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: KME 2/750L, Tension carriage for saw frame Ljdpfx Ajv Umb Ejdkerw Viewings are available by appointment.

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 4 h, machine/vehicle number: 15582, VOLVO wheel loader L60H with high-tipping bucket (SW mount) • Tires 600/65R25 Michelin XLD (L3) • Rims for 20.5-25 and 600/65-25, three-part • Full-cover fenders for wide tires 65 series • Mud flaps for wide tires 65 series • Mesh filter in the filler neck • Hand throttle • Automatic engine shutdown • Machine shutdown, delayed • Engine D6J, emission level V (EU) • Reversible fan Lrsdpevmp Hnefx Adkow • Speed limiter, 40 km/h • Traction roller • Premium comfort seat / 3-point belt (air-suspended, heated, horizontally suspended) • Air conditioning incl. automatic climate control ACC • Radio DAB + incl. USB and AUX connection / Bluetooth • DAB + radio preparation right, incl. loudspeaker • Steering wheel button • Sliding window in the driver's door • Sun blind, side window • Rear view camera incl. LCD monitor (color) • Emergency steering • S-cab air filter • CDC comfort driving and steering gear • Operating permit attached in the cabin (wire cable) • Electrically adjustable, heated rear view mirrors • Noise reduction kit, EU excl. sticker • License plate holder incl. lighting • Driving/main headlight LED asymmetrical right • LED power package • Rotating beacon, LED • Reversing warning device (acoustic) broadband sound • 4th hydraulic circuit (standard mast) b. Multi-lever operation • Separate device lock for quick coupler • Central lubrication system (Volvo) • Wheel wrench set • Tool set • Step, right side • BSS mast damping • Additional counterweight 500kg for wood and industrial applications • Trailer coupling • Reinforced protective grille for rear lights • Tooth guard for bucket • Protective plates for rear frame, right and left • Sound marking • CE marking • Kit German version • Caretrack GSM (hardware) • Caretrack GSM basic version (according to current VCE conditions) • Hydraulic quick coupler • VOLVO high-tipping bucket – SW mount, width: 3,000mm, capacity: 7m3