Condition: used, Two roller conveyors from Paul, suitable for the sub-table crosscut saw AO or similar machines. Ppodpfxoyarm Us Amkjt Roller conveyor length 1: 340 cm Roller conveyor length 2: 190 cm Roller width: 56 cm

Condition: used, bore 50 mm Ppsdpoxvchmefx Amkjt

Condition: used, cutting width max. ca. 600 mm Cutting height max. ca. 120 mm Ppedpfexrtzpsx Amket feed pneumatisch m/min

Condition: used, Speed: 2,700 rpm Motor: 0.24 kW Saw unit including cable and switch. Podpsw Uz Rrjfx Amkspt

Condition: new, Width: 100 mm Podjw Uig Uopfx Amkjpt Length: approx. 20 m Timing belt sold by the meter, 100 mm wide, suitable for Reinhardt saws.

Condition: used, Cutting height max. ca. 100 mm Chain width 300 mm Motor output 45 kW Pjdpfx Ajw Ng T Ujmkopt

Condition: used, cutting length ca. 2.200 mm mitre angle 45° - 90° workpiece max. 50 x 70 mm Pedjw D Dfxepfx Amkjpt

Condition: used, Bore: 70 mm Width: 6.0 mm Diameter: 250 mm Blades: 20 + 2 Podpfx Amowrrdrskjpt Circular saw blade or grooving saw in very good used or near-new condition.

Condition: used, cutting width 380 mm Cutting height 85/40 mm machine weight ab. 50 kg Ppedpfowqphlex Amkst Combined pull-through and table saw Graule AGT. The pull-through saw can be tilted and swiveled. The machine can also be used as a pull-through saw only by removing the table.

Condition: used, Bore: 30 mm Ppedpfxjwcpnpo Amkot Width: 3.5/4.8 mm Cutting circle (ø): 500 mm Material: steel Blades: HW WZ Z144

Condition: used, Year of construction: 1999, functionality: fully functional, empty load weight: 1,085 kg, load capacity: 2,900 kg, opening width: 2,100 mm, Rotating fork clamp Load center: 340 mm Pedpfsy T Szmex Amkjpt ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: very good Description: Kaup attachment, rotating fork clamp 4T453, year of manufacture: 1999, load capacity: 2900 kg at 500 mm, fully functional! Max. opening width: 2100 mm, width of clamp arms: 570 mm, height of clamp arms: 830 mm.

Condition: used, band length ca. 1.700 mm + 2.700 mm cutting width max. 2.500 mm Ppedpfx Amjv Hgb Nekst Cutting height max. ca. 80 mm

Condition: used, Hard drive: Empty Psdpfet N Ag Nex Amkept Technical data: on request Condition: Functional

Condition: used, Cutting height ca. 60 mm engine 2,2 connected load frequency 16 A / 400 V Pjdpfx Amjtvb Hhokjpt

Condition: used, Cutting height ca. 60 mm engine 1,5 kW connected load frequency 220 V Ppedpfstvb Hdox Amket

Condition: used, Bore: 30 mm Width: 3.8 mm Blade diameter (ø): 500 mm Material: Steel Psdpfx Aetddxvsmkopt Blade: HW Z72

Condition: used, Bore: 30 mm Width: 3.7 mm Cutting circle (ø): 494 mm Material: Steel Blade: HW WZ Z72 Podpfx Aetddxrjmkjpt

Condition: used, Bore: 30 mm Width: 5.2/3.2 mm Cutting circle (ø): 500 mm Hole spacing: approx. 60 / 63 mm Material: steel Pjdpferucqcjx Amkjpt Blade: HW WZ Z120

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Features and technical data: - Equipped with electric height and tilt adjustment for the main saw blade, dimension input via keypad - Digital display for tilt angle and cutting height - CE version - Cutting length: 3000 mm - With center and end position locking - Cutting width: 1300 mm Pjdpfx Ajy Siz Ismkspt - Fine adjustment on parallel fence - Saw blade diameter max. 450 mm - Motor: 5.5 kW with 4 speeds (3000/4000/5000/6000 rpm), manually adjustable - With automatic brake and digital speed display - 2-axis scorer with electric height and lateral adjustment - RAPIDO scoring system - DUPLEX double-sided mitre fence Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Pjdjyuld Aopfx Amkopt Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: used, Altendorf F45 panel saw 320 cm carriage, blade tilt and height adjustment via hydraulic system, Ppjdpfsy T Eutex Amket rip fence on the right side, manually adjustable up to 1350 mm, scoring saw, 0.75 kW, 5.5 kW motor, max. blade diameter 450 mm.

Condition: good (used), functionality: fully functional, Crosscut Saw OMEC TA185 Maximum cutting height: 180 mm Maximum cutting width: 900 mm Saw blade diameter: 550 mm Pneumatic material clamping Pneumatic saw feed Podsy Sff Nopfx Amkopt Saw operated via two-button control Main motor power: 7.5 kW Machine dimensions: 492x145x120 cm (H) Weight: 600 kg

Condition: excellent (used), Paoloni P 300 Panel Saw with Scorer | 3200mm Carriage, Italian, 790kg Ppodey Tzqkepfx Amkjt Description: For sale is a professional, classic panel saw from the renowned Italian manufacturer PAOLONI, model P 300. The machine features a very heavy, cast iron and steel construction (weighing a substantial 790 kg), which ensures excellent stability, geometric rigidity, and superior vibration damping during operation. This is a proven, mechanically reliable design without unnecessary, failure-prone electronics – ideal for use in artisanal carpentry workshops and for furniture production. ⚙️ TECHNICAL DATA FROM THE NAMEPLATE: Manufacturer: Paoloni (Fano - Italy) Model: P 300 Year of manufacture: 1997 Serial number: 0602 Supply voltage: 380 V (Three-phase) Frequency: 50 Hz Motor power (KW): 4.75 kW Current consumption: 11 A Machine weight: 790 kg 💎 MAIN FEATURES AND EQUIPMENT: Long Aluminum Panel Saw Carriage: Provides smooth, effortless feed and high cutting precision. The carriage length allows for easy cutting of full-size furniture panels (cutting length approx. 3200 mm). Scoring Unit: Essential for clean cutting of laminated, chipboard, and MDF panels – guarantees no chipping of the material on the underside. Precise Geometry Adjustment: Manual, reliable raising/lowering of the main saw blade and adjustment of the blade tilt angle (in the range of 0°–45°) using an ergonomic wheel with a dial indicator. Stable Side Table: Structure mounted on a solid, telescopic support arm, equipped with a long transverse ruler with two stops for series cuts. Parallel Guide: Solid mounting on a thick, steel rod, ensuring repeatable dimensions on the right side of the blade. 📐 OPERATING PARAMETERS (Standard for the P 300 series): Cutting length: approx. 3200 mm Cutting width with the right guide: approx. 1150 mm Maximum main blade diameter: 300 mm - 350 mm Cutting height: up to approx. 100 - 115 mm (depending on the installed blade) 🛠️ TECHNICAL CONDITION: The machine is complete, in good visual and technical condition. Ready for immediate use in the workshop.

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Features and technical data: - Cutting length: 4300 mm - Vertical cutting height: 2150 mm, horizontal cutting height: 2100 mm - Maximum cutting depth: 60 mm - Saw blade diameter: 250 mm; bore: 30 mm - Motor: 4 kW - Speed: 5100 rpm - Material support with rollers - Fixed support elements for secure positioning of workpieces - Middle support: stable support elements at working height, individually manually foldable - Measurement reading for: - horizontal saw cuts via scale - horizontal saw cuts via strip stop from 50–500 mm Ppjdpfx Ajxvnpcomkjt - vertical saw cuts via stop from 0–1300 mm - Air connection for pneumatically retractable slatted frame (required air pressure: 6 bar) - Scoring system: by double cut of the main saw blade; the plunge depth of the saw blade is limited simply by adjusting a stop, so the saw blade scores the workpiece in the direction of feed Availability: short term Location: Röllbach

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data Cutting length: 5300 mm Cutting height: 2200 mm (edging height 2110 mm) Cutting depth: max. 60 mm Extraction system: - Saw unit: 120 mm - Frame end: 100 mm Workpiece support: - Stable plastic support for optimal stability, also suitable for narrow workpieces. - Chips are removed via diagonal slots. Psdpfoy Scl Tox Amkspt Roller transport system: Manual for easy and gentle material handling Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Saw blade: Carbide (HM), 250 mm, hollow ground, 48 teeth Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding rail: incl. workpiece support for narrow parts (5 positions) with strip stop with Supercut scoring unit Extraction system according to BG guidelines TRK (below 2 mg fine dust / m³ air) Availability: short-term Location: 63934 Röllbach