Used panel saws with a cutting length from 0 to 999mm for sale (19)

Condition: ready for operation (used), Year of construction: 2021, This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. • Saw blade diameter: 250–550 mm Gedpfx Agjx D Exqofjua • Cutting height: 202 mm (90°), 140 mm (45°) • Blade speeds: 3000 / 4000 / 5000 rpm • Cutting width: 1250 mm • Cutting length (sliding table stroke): 2800 mm • Control: Kappa 550 e-motion • Cantilever table support surface: 1250 x 650 mm • Telescopic stop for crosscuts up to 3200 mm • Crosscut stop swiveling range: 90° to 45° • Rear table extension behind saw axis: 1200 mm • Rip fence: electronically positioned via ball screw, enclosed/dust-free in the table

Condition: ready for operation (used), Year of construction: 2012, Panel saw manufactured in 2012. This SCHELLING FH 4 features a nominal cutting length of 4250 mm and a maximum saw blade diameter of 350 mm. It offers a feed speed of up to 80 m/min and is equipped with an ARDIS software package for enhanced functionality. Includes a storage grundner. If you are looking to get high-quality panel cutting capabilities, consider the SCHELLING FH 4 machine we have for sale. Contact us for further details. Panel dimensions • Length: 2000–4100 mm • Width: 300–2100 mm • Thickness: 6–60 mm • Panel thickness tolerance: -0.2 to +0.2 mmMachine specifications • Nominal cutting length (Saw Machine 430): 4250 mm • Main saw blade diameter (max): 350 mm • Scoring saw blade diameter: 300 mm • Max saw blade clearance above table: 95 mm • Max package height: 80 mm • Strip aligner alignment force: 400–2000 N/piece • Max clamp opening: 90 mm • Working height: 970 mm • Overall height: 2070 mmDrives and speeds • Main saw motor power: 15 kW • Saw unit feed speed (forward): 5–120 m/min • Saw unit feed speed (reverse): 120 m/min • Feed speed (forward): up to 80 m/min • Feed speed (reverse): up to 80 m/min Additional equipment • Panel storage system (Manufacturer: Grundner) • Length: 24.90 m • Width: 14.17 m • Stack height: 2 m • Lifting height: 2.10 m • Max panel size (L x W): 4.20 x 2.10 m • Min panel size (L x W): 1.80 x 0.60 m Guodpfx Agjyyw U Ssfoa • Max lifting capacity: 250 kg • Horizontal drive power: 2.2 kW • Horizontal travel speed: approx. 120 m/min • Vertical travel speed: approx. 40 m/min • Panel material: suitable for vacuum gripping technology • Connected load: 6 kW • ARDIS software package

Condition: ready for operation (used), Year of construction: 2013, CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details. • Condition: Excellent – fully functional, very well maintained, low usage, ready for immediate operationTechnical specifications • Max cutting length: approx. 4,200 mm (depending on configuration) • Max cutting width: approx. 3,200 mm • Saw blade tilting range: 0° to approx. 45° • Max cutting height at 0°: approx. 72 mm • Main saw motor power: approx. 14 kW • Scoring blade diameter: approx. 180 mm • Saw carriage feed speed: up to 100 m/min (forward/backward, Speed version) • Control system: CNC/PC controlEquipment and features • Automatic tilting saw blade for angular cuts • Optimized cutting cycles (single, multiple, batch) • Program-controlled pusher for accurate positioning • Integrated scoring unit for clean cuts • Air tables (3x) for easy handling of large panels • Format and angular cutting system Godpjyvqz Defx Agfjua Additional equipment • Saw blades • Scoring blades • Optional optimization software

Condition: good (used), Code: 0332 Brand: SALVADOR Model: SEL/600 - CE Standard Longitudinal panel saw for postformed strips and finished components with roller feed and unloader (SPLITTER) – CE Standard Technical data: Gujdpjyu Uk Sofx Agfoa Cutting width/REF mm 10–650 Cutting thickness mm 10-60 Crosscutting saw blade diameter mm 350 Scoring blade diameter mm 350 Crosscutting motor power Hp 5,5 Scoring motor power Hp 2 Carriage feed speed mt/min 15 Suction port diameter n° 2 mm 160 each Work surface height 900 mm Workpiece feed right/left The panel saw consists of a cutting unit composed by 2 aligned blades. One blade scores the material and the other performs the cut Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Roller diameter 80 mm Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Stop guides Compressed air 6-8 atm Weight kg 1900

Condition: ready for operation (used), Year of construction: 2025, Panel saw manufactured in 2025. This Wehrmann WT-50/900 is designed for classic cutting of wood and wood-based materials, featuring a maximum panel width of 450 mm and thickness ranging from 8 mm to 40 mm. It includes a user-friendly design with servo-controlled drives and a robust steel frame. If you are looking to get high-quality cutting capabilities, consider the Wehrmann WT-50/900 panel saw we have for sale. Contact us for further details. • Condition: New • Application: Classic cutting of rectangular workpieces made of wood/wood-based materials with laminate (CLP, HLP), paper, foil, or veneer • Workpiece/panel capacity: • Length: from 140 mm • Width (finished size): min 50+50 mm; max 450+450 mm (asymmetrical cutting possible) • Thickness: 8–40 mm • Max workpiece weight: approx. 30 kg • Shape: rectangular • Working height: 900 mm • Machine side: Right-hand machine (stop side on the right in the direction of travel) • Feed/adjustments: • Feed speed: 5–40 m/min, servo-controlled • Electronic height adjustment: 5–45 mm via Beckhoff servo axis • Right-side Teflon stop ruler, servo-driven • Left infeed ruler with pneumatically spring-loaded unit, servo-driven • Construction/transport: • Sturdy welded steel frame • Transport by belt with height-adjustable top pressure • Low-maintenance belt with gentle transport coating • 32 mm V-belt top pressure with spring-loaded rollers for reliable guidance • Aggregates: • Aggregate 1: Frequency-controlled scoring saw • Perske motor 4.4 kW, 50 Hz, 400 V, 4500 rpm • Tool holder D=35, key • External + internal thread R/L, servo-controlled, tandem, non-swiveling • Height adjustment via Beckhoff servo axis • Lateral adjustment with mechanical digital display • Max saw blade Ø 350 mm • Flow-optimized extraction hoods • Without tools • Aggregate 2: Frequency-controlled main saw • Perske motor 6 kW, 50 Hz, 400 V, 5000 rpm, counter-rotation • Tool holder D=35, spline shaft, external + internal thread R/L • Max saw blade Ø 400 mm • Split wedge adjustable by hand • Height adjustment via Beckhoff servo axis • Lateral adjustment with mechanical digital display • Flow-optimized extraction hoods • Without tools Gusdpfx Ajyuggxogfja • Control and HMI (Beckhoff): • PC-based control with integrated PLC and electronic line control (TwinCAT 3) • 15.6" multitouch panel with integrated keypad/keyboard/mouse • Simple, component-oriented program creation; freely definable program names; virtually unlimited program memory • Operation via keyboard/mouse/touch; message system for operator/error messages • MDE Basic: production time, setup time, downtime, fault time, unit counter, adjustable recording period • Fast EtherCAT fieldbus; Ethernet RJ45; USB port • Uninterruptible power supply (UPS) for panel PC • PLC programming per IEC 61131-3 • Feed lock for adjacent machines/transport systems • Included with basic machine: • Sound absorber/protective hood with safety lock • Connection pieces for external extraction (min air velocity 28 m/s, negative pressure 2480 Pa) • Compressed air connection with maintenance unit • Integrated control cabinet with cooling unit (ambient 10–45 °C) • Safety and protective measures per CE; CE mark • Utilities and specs: • Operating pressure: 6 bar • Power: 3/N/PE, 400/230 V, 50 Hz, ±5% (ECD protective circuit not applicable) • Language: • Machine labeling: German • Operating instructions: German • Spare parts lists: German • Paint finish: • Base/cladding: Gray-white RAL 9002 • Aggregates: Dust gray RAL 7037

Condition: ready for operation (used), Year of construction: 2020, overall weight: 3,800 kg, This 3-axis BIESSE Selco WN 2 was manufactured in 2020. It features a robust machine weight of 3900 kg and operates on a power supply of 400 VAC with a consumption of 12 kW. The machine is designed for efficient panel cutting and includes a CE marking for compliance. If you are looking to get high-quality panel saw capabilities, consider the BIESSE Selco WN 2 machine we have for sale. Contact us for further details. • Electrical cabinet weight: 190 kg • Power supply voltage: 400 VAC • Full load current: 24 A • Number of power supply phases: 3 • Power consumption: 12 kW • Frequency: 50 Hz • Short circuit rating: 10 kA RMS • Compressed air supply: 6.5–7 bar • Required suction flow speed: 30 m/sec Gusdpfoyt Rklsx Agfja • CE marking: Yes

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,750 h, overall weight: 8,100 kg, This 3-axis PANHANS POLYPAN 47 was manufactured in 2006. It features 4200 mm cutting length and width, maximum cutting heights of 72 mm at 0° and 40 mm at 47°, and a saw carriage speed up to 100 m/min. Main motor power is 13.5 kW, with a scoring unit. Weighs 8100 kg. If you are looking to get high quality sawing capabilities consider the PANHANS POLYPAN 47 machine we have for sale. Contact us for further details. • Configuration: Machine including control cabinet • Cutting length (SL): 4200 mm • Cutting width (SB): 4200 mm • Max cutting height (saw blade vertical 0°): 72 mm • Max cutting height (saw blade swiveled 47°): 40 mm • Cutting accuracy (saw blade vertical 0°): +/- 0.1 mm • Cutting accuracy (saw blade swiveled): +/- 0.2 mm • Angle accuracy (feed speed < 10 m/min): +/- 1 mm • Angle accuracy (feed speed > 10 m/min): +/- 2.5 mm • Feed speed (saw carriage forward/reverse): 0–100 m/min • Feed speed (width stop forward): 25 m/min • Feed speed (width stop reverse): 100 mm • Axis travels (minimum plate size): X = 300 mm, Y = 100 mm Godpfx Agex D Rtysfeua • Axis travels (maximum plate size): X = 2800 mm, Y = 750 mm • Max drilling diameter: 13 mm • Max total length: 115 mm • Number of tools: 1 drilling spindle • Tool holder: Quick-release chuck DM 1-13 • Connection values • Total connection value: 21.0 kVA • Nominal current: 3x 32 A • Pneumatic connection: 8 bar (minimum 6 bar) • Air consumption: 3 liters/min per clamp • Sound pressure level (Lpa) at operator position: 86 dB(A) • Sound power level (LWA): 103 dB(A)

Condition: ready for operation (used), Year of construction: 2007, This PANHANS POLYPAN 47 F panel saw was manufactured in 2007. It features a cutting length and width of 4200 mm, main saw blade diameter of 350 mm, and a main saw motor power of 11 kW. The saw carriage offers variable feed speeds up to 80 m/min. Ideal for precise, large-scale panel dividing. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Cutting length: 4200 mm / cutting width: 4200 mm / main saw blade diameter: 350 mm / cutting height (max): 72 mm / saw exit (max): 82 mm / main saw motor: 11 kw / main saw speed: 4980 rpm / scoring saw motor: 2. 2 kw / speed of scoring saw: 0. 55 kw / feed speed of saw carriage: infinitely variable, 0 - 80 m/min / return speed of saw carriage: 80 m/min / frequency drive width stop: 1. 1 kw / width stop in front: infinitely variable, 0 - 25 m/min / width stop return speed: 80 m/min / operating pressure: 6 - 8 bar / x-axis: linear guide, servo drive 80 m/min / z-axis: linear guide, servo drive downwards: 20 m/min, upwards: 15 m/min • Drilling/milling head / 14 drilling spindles (standard) / drive: 4 kw / vertical drilling speed: 7280 rpm / extension stroke: 50 mm / max. Drilling depth: 45 mm / tool holder: weldon Ø10 • Smallest part to be machined: min 80 x 250 mm / largest part to be machined: max 2650 x 2070 mm Gjdpex D N Trjfx Agfeua • Working path y: 2100 mm / working path x: 3000 mm

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm • Max gripper opening: 100 mm Gusdpfx Aoyf I U Segfja • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: ready for operation (used), Year of construction: 2005, operating hours: 4,000 h, Panel saw manufactured in 2005. This STRIEBIG Standart II TKR 6220A features a robust, torsion-resistant construction and a powerful 5.5 kW motor for efficient cutting. It offers a cutting area of 5300 x 2200 x 80 mm and includes up to 17 ball-bearing mounted support rollers for stability. If you are looking to get high-quality cutting capabilities, consider the STRIEBIG Standart II TKR 6220A machine we have for sale. Contact us for further details. • Welded, multi-braced, torsion-resistant construction • Up to 17 ball-bearing mounted support rollers, braked • Automatically adjusting aluminum slatted base with plastic supports • Up to 4.7 m long, split center support at optimal working height Gujdpfx Asym Aqqogfoa • Powerful, low-vibration 5.5 kW motor • Super-silent system for motor noise reduction • Carbide-tipped circular saw blade 300/30 mm • Connection capability to external dust extraction systems • Cutting area: 5300 x 2200 x 80 mm • Small parts support Additional equipment • External dust extraction system (not included in the price) • Connection materials for dust extraction (not included in the price)

Condition: ready for operation (used), Year of construction: 2005, Panel saw manufactured in 2005. This SCHELLING FM-H 430 features a feed speed of up to 25 m/min and a saw feed speed of up to 120 m/min. It is equipped with a powerful saw motor of 19 kW and a clamp opening of 113 mm. If you are looking to get high-quality cutting capabilities, consider the SCHELLING FM-H 430 panel saw we have for sale. Contact us for further details. • Feed speed: forward 0–25 m/min, reverse 80 m/min • Saw feed speed: forward up to 120 m/min, reverse 120 m/min • Saw motor: up to 19 kW at 2930 rpm, 50 Hz • Scoring motor: 1.5 kW at 2830 rpm, 50 Hz • Clamp opening: 113 mm Gujdpfxoyn I Tao Agfoa • Cutting straightness: ±0.1 mm over a 3 m cutting length • Dimensional accuracy: ±0.2 mm length, ±0.2 mm width, ±0.3 mm diagonal • Main saw blade: diameter 450 mm; bore 30 mm; thickness 4.4 mm; 72 teeth • Scoring blade: diameter 200 mm; bore 20 mm; thickness 4.2 / 3.5 mm; 36 teeth • Edge scoring blade: diameter 220 mm; bore 20 mm; thickness 4 / 4.8 mm; 2 × 24 teeth

Condition: ready for operation (used), Year of construction: 2001, Panel saw manufactured in 2001. This PANHANS EURO 32 features a cutting length of 5800 mm, a cutting width of 2x2200 mm, and a maximum cutting height of 100 mm. It includes a hydraulic lifting table with roller conveyor and an automatic angle cutting device. If you are looking to get high-quality panel cutting capabilities, consider the PANHANS EURO 32 machine we have for sale. Contact us for further details. • Cutting length: 5800 mm • Cutting width: 2 x 2200 mm • Max. cutting height: 100 mmAdditional equipment • Rear roller table: 3982 mm • Rear support beams: 9 pcs., 40 x 4056 mm • Front air-cushion tables: 2 pcs., 600 x 1800 mm, movable • Front air-cushion table for angle cutting device: 1 pc., 600 x 1400 mm • Left air-cushion angle table: 600 x 1800 mm • Angle ruler: up to 2060 mm • Liftable clamping collets: 9 pcs. Gujdpfx Ageyn Nccjfja • Liftable stop jaws: 2 pcs. • Side pressure: 65–1365 mm, infinitely variable • Automatic angle cutting device • Hydraulic lifting table with roller conveyor • Feed roller conveyor • 4 longitudinal aligners • 4 plate pullers

Condition: ready for operation (used), Year of construction: 2019, This SCM Class SI 400EP panel saw was manufactured in 2019. It features a maximum saw blade diameter of 400 mm and a cutting width on rip fence up to 1500 mm. The sliding table saw offers a squaring stroke of up to 3800 mm. Ideal for precise wood panel cutting. Contact us for more information. • Machine Condition: Very good • Maximum Saw Blade Diameter (with Mounted Scorer): 400 mm • Maximum Saw Blade Projection from Table at 90° / 45°: 140 / 97 mm Gujdpfx Ajyabkvsgfoa • Cutting Width on Rip Fence (Rip Capacity): 1000 – 1500 mm • Maximum Squaring Stroke of Sliding Table Saw: 3200 – 3800 × 3200 mm • Three-Phase Motor Starting From: 7 kW (8 kW) / 50 Hz (60 Hz)

Condition: ready for operation (used), Year of construction: 1995, This SCHELLING FLM 365.002 panel saw was manufactured in 1995. It features a main saw blade diameter of 400 mm and a scoring saw blade diameter of 200 mm, with a maximum saw blade projection of 80 mm. The machine is capable of processing materials like acrylic and glass-fiber reinforced plastic, with a maximum panel length of 3000 mm and a maximum thickness of 80 mm for acrylic. Consider the opportunity to buy this SCHELLING FLM 365.002 panel saw. Contact us for further details. • Technical data: • Main saw blade diameter: 400 mm • Scoring saw blade diameter: 200 mm • Max. saw blade projection: 80 mm • Max. clamp opening: 100 mm • Max. stack height: 60 mm • Main motor power (50/60 Hz): 15 / 18 kW • Saw unit feed speed: 0.2 – 22 m/min • Saw unit return speed: 22 m/min • Forward feed speed: 10 m/min • Backward feed speed: 10 m/min • Working height: 930 mm • Performance and requirements: • Processable materials: Acrylic, glass-fiber reinforced plastic (GFRP) • Max. panel length: 3000 mm • Max. panel width: 2200 mm • Max. thickness (Acrylic): 80 mm • Max. thickness (GFRP): 60 mm • Edges: deburred • Panel flatness: max. wave 5 mm • Thickness tolerance: ±0.2 mm Gsdpfxsyhqlro Agfjua • Electrical power consumption: approx. 25 kW • Supply voltage: 380 V / 50 Hz • Compressed air requirement: approx. 100 l/min (6 bar) • Extraction requirement: approx. 4000 m³/h (air speed 32 m/s) • Equipment (included with the machine): • Scoring unit • Servo-driven feed (0 – 40 m/min) • Side guides on roller table, automatic adjustment; adjustment range 80 – 2200 mm • Safety light curtain with separate support frame • Hold-down clamps (according to machine configuration) • Cooling and spraying system • Computer control – COMMANDER (PLC/SPS) with display, membrane keyboard, diagnostic system • Graphical display of cutting plans • Electrical cabinet and control integrated in the machine • Slow scoring / pre-cut function

Condition: ready for operation (used), Year of construction: 2007, controller model: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Additional equipment • Air cushion table with roller element 2160 x 650 mm: 4 pieces • Central blower: 1 piece Machine Benefits Qualitative Machine Benefits • Ce-certified, gs-certified, fph wood dust certified • Division: 75/275/475/1050/1850/2650/3450 mm measured from the angle rule to the center of the clamping collet • 2 additional two-fingered clamping collets possible • 4 manual trimming rakes at clamping collets • 1 additional one-fingered clamping collet possible • Jet spacing of air cushion tables: 70 x 70 mm Technical Machine Benefits • Pre-cut saw motor: 2. 2 kw • Operating voltage: 400 v / 50 hz • Electrical connection value at hs motor: 18. 0 kw = 24 kw, 21. 0 kw = 27 kw • Positioning accuracy: +/- 0. 1 mm/m • Surface-friendly material transport, lifetime positioning accuracy, no lubrication required, high program slider speed, maintenance-free, full stability of the steel table maintained, easy, cost-effective replacement of phenolic resin plates, minimal wear of the cylinders, uniform pressure application, minimal cutting = scratch cut, significant cycle time savings, top cutting quality, minimal setup times, reduction of cycle time, pressure strength electrically adjustable • Cutting length: 4300 mm • Cutting width (program slider travel): 4250 mm • Roller track (element 10-track): 1 piece Guodpfoyaiiyex Agfea • Roller track (element 2-track): 5 pieces • Clamping collets: 7 pieces (first 3 pieces two-fingered, all others one-fingered) Extra Information Machine still under power

Condition: new, Universal complete solutionfor cut optimization and label printingIncluding office software, W-LAN box, tablet PCwith machine holder and label printer- Easiest handling and suitable for all machines- Cut optimization at the desk or directly on the tablet PC- Immediate availability of the cutting plan on the sawW-LAN transmission- Parts lists can be used from all common (CAD) programs- Label printing by simply pressing the pieces in the cutting plan(Touch screen)- Labels with dimensions etc. on the cut edge ensure goodOverview in the panel store Gsdpfx Agovwf Ipefeua

Condition: ready for operation (used), Year of construction: 2010, machine/vehicle number: 0-341-07-8150, functionality: fully functional, cutting width (max.): 3,800 mm, saw blade diameter: 380 mm, cutting length (max.): 4,300 mm, throat depth: 75 mm, Equipment: scorer, TECHNICAL DETAILS Blade extension: 75 mm Cutting length: 4,300 mm Cutting width: 3,800 mm Main saw blade, max. diameter: 380 mm Main saw blade, power: 9.2 kW Guodpfx Agoxx Svrefea Scoring saw blade, max. diameter: 180 mm Scoring saw blade, power: 2.2 kW Pusher carriage speed: up to 80 m/min Saw carriage speed: 1–120 m/min MACHINE DETAILS Numerical control: POWER CONTROL Software: Cad Matic 4.0 Electrical Data Voltage: 400 V Current: 31 A Frequency: 50 Hz Secondary current: 40 A Control voltage: 24 V DC EQUIPMENT Front panel loading Front-side unloading Automatic side aligner Fixed front table made of Bakelite with air cushion system 3 mobile front tables made of Bakelite with air cushion system Pusher carriage with 6 clamps

Condition: new, Code: N0004 Brand: SICAR Model: SEGA 315 - CE Standard Professional panel saw SEGA 315 with carriage 3200 mm , blade 315 and scoring unit with separate motor - CE Standard Three-phase main motor 7,5 hp. Parallel guide on round bar with cast iron support and micrometric adjustment, blade lifting and tilting by handwheels, tilting blade unit with integrated scoring unit, aluminium carriage sliding on ball bearings, fence on extendable frame with two reversible stops. TECHNICAL DATA: Main worktable mm 910x550 Additional worktable mm 910x760 Additional lateral worktable mm 500x550 Main blade speed rpm 4000 Scoringunit speed rpm 8000 Blade diameter mm 300x30 Gjdpfjhktiuox Agfsua Scoring diameter mm 120x20 Cutting height at 45° mm 75 Cutting height at 90° mm 100 Max cutting distance between blade and scale mm 1250 Carriage dimensions mm 3200 Three-phase motor power HP 5,5 Scoring unit motor power kW-HP 1,0-0,75 Overall dimensions for transport mm 3450 x 2000 x 1000 h Weight kg 570 MACHINE READY FOR DELIVERY

Condition: used, Radial saw Guedjqqu Auspfx Agfea