Used circular table saws for sale (35)

Condition: new, Year of construction: 2025, cutting width (max.): 280 mm, cutting height (max.): 48 mm, saw blade diameter: 168 mm, cutting width at rip fence: 280 mm, Festool Cordless Table Saw CSC SYS 50 EBI-Set 36 Volt battery voltage, No-load speed 4,500 - 6,800 rpm, Pgedpfx Asxzudqsdnow tiltable from -10° to +47°, cutting height 0 - 48 mm (at 45° = 34 mm), electric height and tilting adjustment with digital display maximum rip capacity 280 mm, sliding table with cross-cutting width up to 450 mm, miter angle stop 0 - 70°, complete with: saw blade 168 x 1.8 x 20 mm, Z = 42 tooth WD, parallel guide, push stick, angle stop, dust collection bag, riving knife for concealed cuts, riving knife with blade guard, 6 mm hex key, energy set SYS 18 V 2 x 5.5/TCL 6 DUO, stand UG-CSC-SYS Order No.: 577379 available ex stock Seevetal, promotion valid until the end of 2025, while stocks last, without shipping and packaging

Condition: excellent (used), Year of construction: 2010, Storti TGS 78, year of manufacture 2010 Podpfx Adsxx N Edsnegw

Condition: excellent (used), Catalogue number: 7754 TECHNICAL DATA min. length of cut element: 340mm/420mm max. length of cut element: 4380mm max. cutting height: 80mm installed blade diameter: 350mm blade guard (also serves as a hold-down) spindle diameter: 30mm main motor power: 3×2.2kW feed motor power: 0.75kW stepless feed speed adjustment manual adjustment of left/right unit fixed central cutting unit dust extraction port diameter: 3x100mm overall dimensions (L/W/H): 5400x1750x1450mm weight approx.: 1500kg – Polish manufacture – For processing pallet boards – Used saw, very good condition Net price: 28,900 PLN Net price: 6,880 EUR (depending on the 4.2 EUR rate) (Prices may vary with significant fluctuations) Pedpfxoxfkn Tj Adnogw

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 130 mm, saw blade diameter: 400 mm, cutting width at rip fence: 1,200 mm, type of input current: three-phase, input voltage: 400 V, main saw diameter: 400 mm, rotational speed (min.): 3,500 rpm, rotational speed (max.): 4,500 rpm, cutting length (max.): 1,250 mm, With a pivoting 400 mm saw blade Pgodpfewa A E Asx Adnew With manual height and angle adjustment 130 mm cutting height Sample machine built in 2022

Condition: new, Year of construction: 2023, functionality: fully functional, cutting height (max.): 79 mm, saw blade diameter: 250 mm, cutting width at rip fence: 769 mm, total height: 7,900 mm, total length: 14,050 mm, total width: 15,500 mm, table width: 792 mm, table length: 508 mm, input voltage: 230 V, extraction connection diameter: 100 mm, overall weight: 120 kg, rotational speed (max.): 3,800 rpm, hole diameter of the disc: 30 mm, power: 1.45 kW (1.97 HP), The Fusion 1 model is an excellent solution for anyone looking for a compact but very accurate and high-quality saw to start with - Polished cast iron table. - Robust cast iron motor suspension. - Can be used with DADO circular saw blade set. - Two T-slot rails on both sides of the circular saw blade. - Quick and easy control and tilting of the cutting height. - Lever for quick exchange of circular blade. - Positionable main switch. - Quick attachment of the riving knife. - Additional rear table included in the price. - Sufficient power for longitudinal and cross cuts up to 79 mm in height. - Storage space for tools and rulers that are always to hand. - Type: Fusion 1 - Recommended area of application: Craftsman - Power (230 V): 1450 W - Recommended fuse switch: 13 A - Disc x clamping: 250 × 30 mm - Rotations: 3800 rotations/min. - Tilting of the disk: 0-45° - Max. Max. cutting height at 45°: 50 mm - Max. Cutting height at 90°: 79 mm - Max. Cutting width: 769 mm - Extraction: 100 mm - Cast iron table size: 508 mm × 792 mm - Overall table size: 1118 mm × 792 mm - T-slot rail dimensions: W × H 24.3 mm (19 mm), × 4.2 (10.7) - Dimensions: 1550 mm × 1405 mm × 1100 mm - Weight: 110 kg - Packaging size: - Cardboard box on its own pallet 1330 mm × 700 mm × 790 mm - Weight incl. packaging: 120 kg Scope of delivery - elongated ruler Pgedpfx Adotuurtjnjw - Angled ruler - Gripper for small parts - Upper suction hood - Rear table extension - Carbide circular saw blade for universal use (diameter 250/30 mm, Z40 - Hose for suction The machine is delivered partially disassembled in a transport box. The set-up time is estimated at approx. 1 hour.

Condition: good (used), functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 70 mm, saw blade diameter: 125 mm, total height: 1,300 mm, total length: 6,000 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, type of input current: three-phase, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 6,500 mm, input frequency: 50 Hz, main saw diameter: 350 mm, overall weight: 3,500 kg, rotational speed (max.): 3,800 rpm, cutting length (max.): 4,200 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, collet bore: 75 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, year of last overhaul: 2024, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of Pgodpfx Aeuyvniednsw with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable.

Condition: used, GRAULE AGT pull and table circular saw Pgodpfx Adexf Tr Usnew

Condition: used, SECOND-HAND RADIAL ARM SAW STROMAB Pgodpfx Aowr T Hbsdnsw

Condition: used, OMGA T421 IDC000097 - saw blade diameter: 400 mm - complete with saw dust filter Pedpou Dhupsfx Adnjgw

Condition: new, Year of construction: 2025, This machine is a powerful, precise and universal device in a compact body, created for all workshops, furniture manufacturers and carpenters looking for a powerful machine. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Precise saw cutting and height adjustment through a knob Parallel guide with microadjustment Table ground, made of cast iron with expansion capability Pedpfxovxhlgo Adnogw Stable, uniform table saw design, intended for any carpentry work Integrated side table provides great cutting capabilities Technical data Maximum saw diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 50 mm 90º maximum cutting depth 80 mm Worktable dimensions 350×800 mm Movable table dimensions 240×1320 mm S1 continuous work motor power 2.2 kW Power supply 400V Weight 180 kg Dimensions 1550×1900×820 mm

Condition: ready for operation (used), functionality: fully functional, Panel saw, saw-milling machine TRIUMPH T3000 Specification: • Condition - used, serviced • Manufacturer - TRIUMPH • Model - T3000 Pgjdpfx Aow Snbxednjw • Sliding table length: 320 cm • Scoring saw with separate motor • Main saw motor - 4.0 kW • Milling spindle motor - 4.0 kW • Scoring saw motor - 0.7 kW • Milling spindle diameter: 35 mm • Main saw spindle diameter: 35 mm • Variable speed adjustment on the milling spindle (via belt) • Manual lifting and lowering of the saw blade • Extraction ports: 120 mm • Weight approx. 900 kg • Transport dimensions: 330 x 120 x 110 cm (L x W x H) Additional information: • Good, original technical condition • Photos show the actual state of the item for sale • Possibility to power on and inspect the machine on site

Condition: used, Year of construction: 1981, functionality: fully functional, Connected load 380V 3.0kW 6.7A Weight approx. 300 kg Cutting width 900 mm Table extension own construction Sliding table Fixed 90° angle fence Saw blade guard PSV own construction Unit swivels to 45° manually Pgodpfx Aeq Au N Eednow Manual height adjustment Extraction socket 100 mm Rip fence missing Stop for ruler missing

Condition: used, Graule AGT combined sliding table saw. The sliding table saw can be tilted and pivoted. The machine can also be used as a sliding table saw only by removing the table. cutting height: 85/40 mm cutting length: 380mm Pjdpfx Adowqphljnegw

Condition: used, SECOND-HAND RADIAL ARM SAW LYONFLEX Pgodpfemzbmisx Adnow - Volt. 380/50

Condition: used, Rip saw - Saw for lengthening boards. Pgodpfotq Ebljx Adnjw - Manufacturer: omega T55 300 - Year: 1996 - Electric motor - Frequency counter

Condition: new, Year of construction: 2025, The innovative circular saw is a combination of a powerful, precise, universal and compact device. It was created for small carpentry workshops, furniture manufacturers and craftsmen. This machine uses many solutions usually used in more expensive devices of this type. The excellent price-performance ratio has been achieved without compromising on quality or versatility. Machine description The TS 315 industrial circular saw for solid wood is an innovative combination of a powerful, precise, universal and compact machine! It was created for carpentry workshops, hobbyists, furniture manufacturers and craftsmen This machine uses many solutions used in much more expensive machines of this type! Excellent price-performance ratio has been achieved without compromising on quality or versatility! The machine is also used to process high-density boards, MDF boards, ABS panels, PVC, solid wood and other materials based on wood or with a similar structure and hardness. Smooth and precise adjustment of height and angle using a knob Stable, heavy, high-quality machine body. Broadening and extending the table allows for comfortable work. Smooth aluminum reinforced sliding table. Precision parallel stop with fine adjustment. Sturdy telescopic arm and extendable extension table Large drive motor guarantees consistent cutting speed, even at a cutting height of 100 mm Technical parameters Shield dimensions 315x30x3.2mm Dial rotation 4250rpm Pedpevxhm Dofx Adnogw Max. cutting height 90/45 degrees 100/75mm Max. cutting width on the guide 940mm Workbench dimensions 800 x 365mm Table extension 760 x 600mm Expanding the table 500 x 350mm Sliding table 1600 x 238mm Suction port diameter 100mm Motor power 2.8kW Supply voltage 400V Weight 245 kg Machine dimensions 1540 x 2400 x 1300mm

Condition: new, Year of construction: 2025, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture Pgjdpfemb U T Hjx Adnew • Woodcraft manufacture • Furniture manufacture

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features Pgodevxhkiepfx Adnjw This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Worktable dimensions 635×420 mm Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 230V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Pgsdpfx Ademcaahonsw Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Pgsdjvxhi Ejpfx Adnow Extraction connector 100/25 mm Worktable dimensions 635×420 mm Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. Pedpfsmb U T Rex Adnjgw • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Pgodpfjvxhhbex Adnjw Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 56 mm 90º maximum cutting depth 80 mm Movable table travel 620 mm Cutting width on the right side of the saw 610 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 400V Weight 125 kg Dimensions 1090×1330×910 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing Pedomcaawjpfx Adnsgw • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Podpovxhhzjfx Adnegw Technical data Maximum saw/hole diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 56 mm 90º maximum cutting depth 80 mm Movable table travel 620 mm Cutting width on the right side of the saw 610 mm Table height 890 mm Motor power 2.2 kW (S1) / 3.1 kW (S6) Power supply 230V Weight 125 kg Dimensions 1090×1330×910 mm Manufacturer: Cormak

Condition: new, Year of construction: 2025, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Pgodpfxemb U T Uo Adnow