for the production of wedge beams, wedge planks or parallel cuts, saw motor 15 kW, feed speed approx. 12 and 24 m/min, max. cutting height approx. 210 mm, max. saw blade Ø 650 mm, max. width opening 180 mm, suction connection 180 mm, roller guide stop adjustable according to scale, toothed infeed roller with gear motor drive, swivelling of saw shaft by spindle drive according to scale 0° to 45
Make : STENNER
Model : VHJ 105
Wheel diameter : 1.100 mm (43 inch)
Width of wheel : 110 mm for sawblade width 130 (5”)
This machine has a tilted fence
Main motor : 22 kW (30 HP) CAUTION ! 220 volts 3 phase !
Currently no starter
Complete with a total of 77 bandsawblades. more
Autimatic line for cutting off for solid wood panels
Min - max working width - 100 to 1300 mm
Min - max working height - 3 to 130 mm
Min - max working length - 600 to 6000 mm
Automatic adjustment for cutting (first cut, last cut, cut on size...) You can put 6000 mm long panel and cut on size which you want...
Machine control and servo motor : Siemens
Automatic infeed to planing/sanding machine...
Automatic exit from sanding machine with panels turning machines...
All parts can be... more
Thin layer from 2 mm thickness
Maximum cutting accuracy up to ± 0.15 mm
Minimal kerf, cutting thickness from 1.3 mm
Ideal for the cutting of dried and wet wood or alternative materials
Surface of the thin layer ready for gluing without need of further processing steps
Friendly user electronic control
Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life
Optical sensor to start cutting cycle and speed change
“Flexam” bel... more
cutting high 400 mm, wheel-Ø 1100 mm, max. saw blade width 110 mm, saw motor 22 kW, 4 feed rollers 400 mm height driven by 4 cardan axle shafts, feed drive stepless variable, pneumatic feed pressure, center cutting device, electric blade tensioner, central lubrication pump, complete sound protection directly fittet to the machine incl. 4 sliding gates, switch board incl. operator desc
1. The roundwood pad
2. Conveyor front in front of timber circuit 7000 mm
3. Timber circle saege CZ
4. Control cabinet
The roundwood support makes loading the round-hol feeder with a forklift easier and, above all, much more effective due to the storage function. Length 5000 mm, 5 pieces Armes
Distance 1 - 2 arm 800 mm, 2-3 arm 1000 mm, 3-4 arm 1000 mm,
Weight 600 kg
Conveyor front in front of lumber circle diaperS Angetribene round wood chain feed table length 7000 mm Width 300 mm Height 80... more
High - band saw
Moehringer / Braun Canali
Type multi-line TB 1250 MF-20
Roll diameter 1250 mm
Roll width 150 mm
Blade speed: 28-50 m/s
Connected load: ca. 45kW
Feed rollers 2 x 4
Height 200 mm
Cutting height lower edge pressure Guide 400 mm and higher
Cutting width 250 mm left of the blade and 250 mm right of the saw blade
with medium cutting device
complete technical documentation
Follow original photos more
Crosscut IRION UKS 600
Length Machines mm 8000
Table length 3000 + 3000 + 45000
Number of heads pcs. 1
Number of engines pc. 5
Maximum Working Width mm 600
Machine for simultaneous transport and processing element so
The machine has CE marking as
The machine used so
Motor power 7.5 kW
Supply voltage V 380-400
Security Guards so
Feed Roller 12
Automatic adjustment so
Very Good Condition so
Many accessories attached as
Equipped with a tray so
crosscut on hydraulics irion transport
the fee... more
AGAZZANI T18 Cross cut saw.
Max. cutting width: 450 mm.
With TIGERSTOP 3000 mm
Length of infeed table: 3000 mm
Length of Outfeed table : 3000 mm
Sawblade : 550 mm
2 hand operated more
-Basic machine - double end Tenoner Fabr. Homag
-Chain car overhang over top pressure approx. 1.250 mm
-rolling chain, speed 10... 40 m / min.
-powered top pressure, electromotive height adjustment
-left side fixed, with fence
Fence adjustable to required receivable with Siko counter
-right side electric-powered movable with lateral pressure rollers.
for workpieces on the ruler
-Width adjustment by means of geared-motor and encoder
Engine 1 - Nutsägeaggregat
Engine 2 - scoring saw unit
Thin cutting gate saw Wintersteiger with magazin
type: DSG 150 ECO
year of manufacture: 2005
infeed speed 0,3 – 1,8 m/min.
lift of the saw frame 210 mm
number of lifts per minute 450
cutting height at saw length 380 mm 30 – 88 mm
cutting height at saw length 420 mm 30 – 128 mm
cutting height at saw length 500 mm max. 208 mm
height difference of the blocks +/-0,5 mm
cutting width for side fence 60 – 162 mm
cutting width for middle fence for height 30 – 40 mm 2 x 30-60 mm
for height ᐳ 40 mm... more
Crosscut REMA DCKLW
Conditions of delivery
Pick your own
Cost of delivery
MACHINE HA hydraulic pedal-operated, Saw Kapow INDUSTRIAL DISTRIBUTION BROKEN cutting width of 800 mm After a major refurbishment motor 4 kW
Schnittbreite max. 380 mm
Schnitthöhe max. 235 mm
2 KATT-Motoren je 13,2 kW
8m Vorschubtisch mit Förderkette
für Holzstämme, Kanthölzer, Bohlen-u. Brettwaren more
BRENTA model PARIL band resaw
diam 1100 x 95/115 mm wide wheels / saws.
Main motor 1460 rpm 15 KW 400 / 660 volt with star delta switch
Manual blade tension, manual rise and fall top sawguide
Feedworks closing with counter – weight and speed variation though friction disk
Machine needs to be reconditioned but has no mechanical damage . this machine is rusty and friction disk needs to be replaced by freq inverter for example. A new paint would make it look totally different .
The Machineseeker Trust Seal gives buyers the ability to detect at a glance whether they are dealing with a trusted seller or not .
What do we verify?
Check of trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of accessibility to main phone number.
Credit report may not contain negative criteria.
Buyer complaints can lead to withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no entitlement to the grant of the Machineseeker Trust Seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.