Used circular saws for sale (126)

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: Amada, _____ Description: Year of manuf. : 2022 Material: Round material:Ø 20 -101.6 mm Rectangular material:20 - 80 mm Cut length:10 - 6,000 mm Saw blade: Design:Disposable carbide saw blades Dimensions:Ø 360 x 2.0 mm Saw: Cutting speed:automatic control Gtsdpeyul Hdsfx Ahvjw Revolutions:55- 180 Feed rate:0 -30 mm/sec Drive power:11 kW x 4P Horizontal clamping pressure:15.2 kN Vertical clamping pressure:3.9 kN Feed system: Drive system:AC servo + ball screw Feed length:715 mm Feed speed:30 m/min Bar loader: Max. diameter:100 mm Standard length:6,500 mm Magazine extension:By 2,000 mm Sorting section:With 2 switches Equipment: Material feed:Bar feeder Chip disposal:Chip conveyor Emulsion mist separator:Air Champion

Condition: good (used), For sale is a used Panhans table saw with a cutting length of 700 mm. The machine has been overhauled by our service team and is fully operational. Technical data: - Cutting length: 700 mm Gtjdpsytrmhjfx Ahvsw - Cutting width: 350 mm - Cutting height: 100 mm - Max. saw blade diameter: 300 mm - Height-adjustable and tiltable - Motor power: 2.5 kW / 3.4 HP The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Panhans, circular saw, saw Reference: R-L0DCD

Condition: used, Motor output 1,5 kW Gtjdpfx Ahsythd Aevjw Cutting height ca. 95 mm Saw blade diameter max. ca. 300 mm Table dimensions 560 x 710 mm Ulmia 1622 circular table saw for precise rip and cross cuts in solid wood and wood-based materials. The robust design enables reliable work in the trade and in the workshop. Ideal for joineries and general wood and furniture construction.

Condition: used, cutting width 250 mm Table dimensions 500 x 650 mm Saw blade diameter max. ca. 300 mm Frommia KS 381 table saw for precise longitudinal and cross cuts in solid wood and wood-based materials. The robust construction, angle stop, and swivel table enable reliable work in crafts and workshops. Ideal for carpentry shops and general woodworking and furniture construction. Gtjdpfx Ahjyr Slbjvow

Condition: ready for operation (used), Year of construction: 2019, total height: 1,250 mm, overall weight: 1,500 kg, working width: 930 mm, product length (max.): 2,200 mm, General Data Gedpfx Ahsx D E T Uevotw Machine weight 1500 kg Measurements height 1250 mm Dimensions Machine Length 2200 mm Technical Specification Working Width 930 mm Feed Speed 12 m/min This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information. Application Types Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2008, total height: 1,838 mm, overall weight: 1,400 kg, product length (max.): 9,400 mm, This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine. Gtodpjx U Drgefx Ahvew • Saw blade motor power: 2.2 kW • Saw blade motor speed: 2800 rpm • Installed power: 5.6 kW • Minimum cutting length: 310 mm • Maximum cutting length: 5000 mm • Saw blade feed speed: 0-60 mm/s • Cutting speed: 66 mm/s • Carriage stroke speed: 20 m/min • Angles: 45°/0/45° • Working pressure: 6-8 bar • Air consumption per cycle at 6 bar: 15 Nl • Saw blade diameter: 450 mm • Saw blade spindle diameter: 32 mm Dimensions Machine Depth 1400 mm

Condition: ready for operation (used), Year of construction: 2007, overall weight: 1,550 kg, cutting speed: 2,800,000 mm/min, Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details. • Blade diameter: 450 mm Gtsdpfx Aheyhfm Dovew • Blade bore: 32 mm • Cutting capability: double miter (left and right) • Build: heavy-duty, solid construction for high stability and precise results • Condition (as stated by owner): low operating hours; regularly serviced; maintained in excellent condition • Application: suitable for workshops, assembly lines, and heavy-duty industrial environments

Condition: ready for operation (used), Year of construction: 1996, This Emmegi Radial Star TU/6 was manufactured in 1996. A used double miter saw, it features a roller conveyor, clamping device, and upgraded PC control. Its design is precise, stable, and robust, ideal for detailed metal sawing tasks. Consider the opportunity to buy this Emmegi Radial Star TU/6. Contact us for more information. • Condition: Used, well-maintained, and ready for use • PC control: Upgraded • Design: Precise, stable, and robust • Note: No dust extraction • Additional equipment • Roller conveyor, right-hand side, 3000 mm • Clamping device (section side) • Spacer profile for roller conveyor (LMS-D 450/500) • Pneumatically swiveling material roll support Gtedpfjx D D Ausx Ahvow • Lubrica lubrication unit for LMS-D • Digital miter display for pre-selecting intermediate miters (LMS/LMS-D) • Label printer UBI Easy Coder 101 for LMS-D • Thermal paper roll labels with removable adhesive (for Formula 21/S or UBI Easy label printers) • Software extension for extra-long cutting up to 9000 mm (LMS-D) • Software extension for cutting corner angles • Software extension for cross-cutting • Drivers for Schüco systems

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,150 kg, This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine. Gjdpfx Ahox D Iqpevotw • Drive system: Gear-and-worm gearbox, oil-lubricated, with 3-phase pole-changing main motor 4.0/4.8 HP • Blade speed: 46/92 SFM • Control panel: User-friendly interface; handwheel for material stop; vertical and horizontal clamping pressure control • Hydraulic system: Fully hydraulic, infinitely variable blade feed; 2.4 HP motor with 6.6-gallon pump • Clamping: Vertical and horizontal clamping device • Material handling: Adjustable material stop • Coolant: Integrated coolant system

Condition: ready for operation (used), Year of construction: 2009, operating hours: 36,000 h, total height: 1,900 mm, overall weight: 2,700 kg, This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information. Additional equipment Gtedpfex Rpdyox Ahvow • Voltage: 400 V • With automatic feed • Residue bunker • Coolant device • Mitre cut • Loading station, chain magazine with 20 compartments on the infeed side • Discharge sorting station, discharge side with 5 m long apron conveyor and programmable discharge stations on both sides • Minimum quantity lubrication • including 2x shelfs from Kasto Extra Information Shelves included Cutting ranges: 04/08 with saw blade 450 mm diameter Round Flat (W x H) Square (W x H) Cutting range 90° @ 150 200 × 100 140 x 140 mm Cutting range 45° x 80 × mm Cutting range 60° × 60 100 × 100 mm Minimum material height for flat material 8 mm Remnant length in automatic cycle at 90° 35 mm Remnant length in automatic cycle at 45° 95 mm Material support height 1,050 mm Features: Total connected load 8 kW Connected load coolant pump 0.1 kW Frequency-controlled drive (optional) 4 kW Cutting speed continuously variable 10 - 60 m/min Direct dimension input up to 9,999 mm Max. permissible material curvature 12 mm/6 m Feed length in one stroke at 90° 2,030 mm Feed length in one stroke at 45° approx. 1,970 mm Saw feed speed 16 - 520 mm/min Saw blade rapid return 2,000 mm/min Material feed speed 0 - 20 m/min Max. clamping force of material feed vise 12,500 N Max. clamping force of vertical vise 25,000 N Clamping force Reducible (option) Saw blade diameter, special flange Mounting hole according to DIN 8576 350 mm 40/4 x 11/63 mm Saw blade diameter Mounting hole according to DIN 8576 with intermediate ring 400, 450 mm 50/4 x 14/80 mmMachine also available without the shelving system. Dimensions Machine Depth 4800 mm

Condition: ready for operation (used), Year of construction: 2004, total width: 1,450 mm, total height: 1,900 mm, overall weight: 1,500 kg, product length (max.): 2,700 mm, Circular Metal Saw manufactured in 2004. This KALTENBACH SKL450NA features a saw blade diameter of 450 mm and a cutting capacity of 150 mm for round materials. With a weight of approximately 1.5 tons, it includes a loading magazine for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH SKL450NA machine we have for sale. Contact us for further details. Gsdpfx Aoykqrwohvstw • Total installation length (foundation plan): 3226 mm • Saw blade diameter: 450 mm • Saw blade type: HM / HSS (DIN 8576) • Blade bore: 50 mm • Number of fixing screws: 4 • Bolt circle: 80 mm • Fixing screw diameter: M12 • Cutting capacity (round): 150 mm • Cutting capacity (rectangular): 140 × 160 mm • Cutting capacity (square): 140 × 140 mm • Saw blade feed speed: 0–3500 mm/min • Rapid return: 4500 mm/min • Cutting speed (at 400 mm blade): 1950 / 3900 m/min • Feed speed (material feed): 10 m/min (optional: 10 / 20 m/min) • Adjustable cut lengths: 10–1000 / 2000 mm • Miter adjustment: Stepless ±90° (manual) • Drive power: 3.7 / 4.7 kW (optional: 4.7 / 6.3 kW) • Compressed air connection: 6–8 bar • Control system: Kaltenbach PLC • Lubrication: Micro spray system Additional equipment • Loading magazine: T3 / L 45 E • Loading length: 6 m

Condition: ready for operation (used), Year of construction: 2008, overall weight: 2,300 kg, cutting speed: 3,400,000 mm/min, This Behringer VAL350NC Circular Metal Saw was manufactured in 2008. It features a cutting capacity for round materials of 115 mm and rectangular materials of 200 × 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. With a weight of approximately 2.3 tons, this machine is equipped with a BEHRINGER PLC control system and a micro spray lubrication system. Consider the opportunity to buy this Behringer VAL350NC Circular Metal Saw. Contact us for further details. • Cutting capacity round: 115 mm • Cutting capacity rectangular: 200 × 70 mm • Cutting capacity square: 105 × 105 mm • Saw blade diameter: 350 mm • Saw drive power: 6.5 / 8.0 kW • Control system: BEHRINGER PLC control • Lubrication: Micro spray system • Controlled zero stop (gesteuerte Nullkante) • Cutting gap extension (Schnittspalterweiterung) • Machine light Gtjdpfx Ahsykravsvsw • Vertical main clamping • Backstop lock (Rücklaufsperre) • Extraction system prepared Additional equipment • Infeed roller conveyor: approx. 5000 mm (custom built)

Condition: ready for operation (used), Year of construction: 2019, Circular Metal Saw manufactured in 2019. This Other Struers Magnutom 5000 features a cutting capacity for round material up to Ø 151 mm and rectangular material of 151 × 403 mm. It has a continuous power of 11 kW and a maximum positioning speed of 70 mm/s. Consider the opportunity to buy this Other Struers Magnutom 5000 Circular Metal Saw. Contact us for further details. • Cutting capacity (Max) – Magnutom 400: • Round material: Ø 151 mm • Rectangular material: 151 × 403 mm • Flat material: 92 × 550 mm • Cutting motor: • Continuous power (S1): 11 kW • Intermittent power (S3): 16 kW • Cut-off wheels – Magnutom 400: • Wheel size (Diameter × Thickness × Bore): 432 × 3.0 × 32 mm • Rotational speed (rated load): 1000–1950 rpm • Cut-off wheels – Magnutom 500: • Wheel size (Diameter × Thickness × Bore): 508 × 3.5 × 32 mm • Rotational speed (rated load): 1000–1850 rpm Gtsdpsyh Hpksfx Ahvew • Positioning and feed: • Cut-off wheel positioning range: • Y-axis: 385 mm • Z-axis: 235 mm • Maximum sample height under cut-off wheel: No limitation • Maximum positioning speed: • Y-axis: 70 mm/s • Z-axis: 50 mm/s • Feed speed range: 0.1–10 mm/s • Cutting force: 0–1400 N • Cutting table (fixed, Magnutom 400/500): 827 × 781 mm • Cutting chamber: • Width: 1000 mm • Depth: 1206 mm • Height: 918 mm Additional equipment • Optional X-table: • Maximum size: 942 × 781 mm • Minimum size: 673 × 781 mm • X-axis travel: 269 mm • T-slots: 12 mm, bi-directional

Condition: used, Year of construction: 2023, functionality: fully functional, overall weight: 1,930 kg, Binderberger GI25EZ proline horizontal meter log splitter Gtjdjyg I Dpepfx Ahvsw Year of manufacture: 2023 Weight: 1,930 kg Operation: electric or PTO Towable with secondary registration plate up to 25 km/h Splitting length: 130 cm Splitting speed (cm/s): forward: 25/27, return: 23/25

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg Gtjdpfx Ahoyaq Nhsvow ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm Gtedjx U Tymopfx Ahvjw - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: used, Year of construction: 1998, Hydraulic chainsaw Blade maximum diameter 500mm Command by double buttons Motor 7.5kw Gtjdpfsyngb Asx Ahvow 400V 350 cm stop with rollers with digital display 1 m roller conveyor at discharge Machine documents

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm - Maximum cutting height for 350mm blade: 100mm - Main blade adjustable up/down and tiltable - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table Gtodpfx Asymnmqshvew - Fence on side table adjustable at an angle - With scoring unit - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm - Main blade motor power: 4kW - Scoring unit motor: 0.75kW - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: excellent (used), Catalogue number 7833 TECHNICAL DATA - Max blade diameter: 400mm - Blade bore diameter: 30mm - Max cutting height: 110mm - Main blade adjustable up/down and at an angle - Blade guard included - With side carriage - Angle guide - Cutting length on carriage: 870mm - Cutting width at the fence: 600mm - Main motor approx.: 4kW - Table dimensions: 900x1020mm - Extraction port diameter: 110mm - Overall dimensions (L/W/H): 2500x1400x1000mm - Weight: 530kg Godpfx Ajx Arimohvetw ADVANTAGES – Polish manufacture – Includes side carriage – DTR technical documentation – Used saw, very good condition Net price: 7500 PLN Net price: 1790 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: new, functionality: fully functional, For sale: New JET Table Saw JTS-600XL – Demo unit at a special price! Entry-level machine with precision-ground cast iron table and sliding table for accurate cuts. Tiltable saw unit! Precision-ground cast iron table – The robust table made from high-quality cast iron provides a flat working surface and enables precise cuts. Sliding table – Manufactured from anodized aluminum extruded profile (1,600 mm) Heavy-duty rip fence – Integrated fine adjustment mechanism and guide rail on a round bar make the rip fence indispensable for precise work. User-friendly operation – Large cast iron handwheels allow effortless adjustments. Extension table for flexibility – Measuring 460 × 600 mm with a telescopic crosscut fence up to 2,200 mm, the extension table accommodates large workpieces. Technical specifications Motor: 230 V / 1.5 kW Blade speed: 4,000 rpm Blade diameter / bore: 250 / 30 mm Blade tilting: 0° – 45° Max. cutting depth at 0°: 80 mm Max. cutting depth at 45°: 54 mm Max. rip width at fence: 610 mm Table dimensions: 800 x 350 mm Gtjdpfx Ahjyk Abwevow Table extension: 415 x 350 mm Right table extension: 800 x 270 mm Precision sliding table: 1,600 x 255 mm Max. cutting length: 1,600 mm Machine dimensions: 1,650 x 2,200 x 1,100 mm Weight: 157 kg Scope of delivery Sliding table 1,600 x 255 mm Circular saw blade Ø 254 x 30 x 3 mm – 36 teeth, carbide tipped Rip fence Extension table 460 x 600 mm with telescopic crosscut fence up to 2,200 mm Dust extraction port Ø 100 mm Shipping Freight shipping: Austria: €70 incl. VAT Germany: €90 incl. VAT South Tyrol: €130 incl. VAT For deliveries via freight forwarder, you will be contacted by phone one business day prior to delivery. Delivery times will be coordinated, and you can provide information on any site-specific requirements (access/restrictions). Goods are delivered by tail lift to the curbside or driveway entrance. Collection from our locations in KUCHL and SÖDING is possible. After we receive your order, we will confirm the earliest possible collection date and contact you. The machine can be inspected at any time during our business hours. Subject to prior sale! Related terms: Circular saw, table saw, saws, panel saw

Condition: used, Euromac panel saw complete with unloading and loading roller conveyors, used. Gtodpsqgtbwofx Ahvew Overall dimensions: mm. 6800 x 1200 Cutting length: mm. 4600 Cutting height: mm. 150 approximately Motor power: 5,59 KW / 7,5 HP

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Gtjdoufgnzepfx Ahvjw Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: good (used), 11kW motor Fully operational Gtedpfxer A Aqlo Ahvsw

Condition: like new (used), Year of construction: 2020, For sale: Walter line, year 2021, has cut only 100m3 – like new. The diagram mistakenly shows sawmill 630; it is actually KBA 500. The rest is correct. Maximum log diameter 350mm, maximum length 4000mm. Price new: 930,000. POSSIBLE exchange of KBA 500 sawmill for larger KBA 630 with rotation, 30/37 kW. Output: 60-70m3 per shift, easily handles two log truck loads – very fast return on investment, buy and start earning immediately, don’t wait! Gedpfx Ajwyl Dbjhvstw

Condition: ready for operation (used), -Cutting area approx. 300 x 120 mm -saw blade 350 mm -traverse path 370 mm -turning knob D= 1200 mm The round table with the saw unit can be turned very easily on both sides Locks for locking are currently mounted on one side. The same can of course also be mounted on the other side Gedpfsbubukex Ahvotw Weight 890 kg