Used trimming saws for sale (39)

Condition: good (used), Year of construction: 2015, Double edging saw with electric adjustment via joystick or programming (manufacturer Weintek Austria). Alignment of the beam through 3 cross chains (can be controlled individually or synchronously). Max. cutting length 4.2 m. Kerf display with 2 lasers. Saw motors each 6.5 kW. Max. cutting width 0.6 m. Max. cutting height 80 mm. Max. cutting height 60 mm. Kljdpfxjwy Hv Eo Ahvjp

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm pass-through width • Saw spindle newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length • 1 adjustable bushing • 50 mm saw spindle diameter • Mechanical height adjustment of top rollers • Integrated chip removal conveyor belt • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop-inspected • Machine newly painted Kljdpfx Aheyudquovep • Hydraulic width adjustment •

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, power: 18.5 kW (25.15 HP), cutting width (max.): 900 mm, This machine comes with a Woodmizer hydraulic log deck It has a 7m cutting length 18.5kWh saw engine Kljdpfjyub Iqox Ahvjp

Condition: like new (used), Year of construction: 2021, functionality: fully functional, operating hours: 150 h, power: 90 kW (122.37 HP), For sale is a like-new CS 600 multi-blade circular saw from Serra. The saw has operated for only 150 hours. Included in the price: 4 sets of spacer rings, 3 sets of saw blades, infeed table (5m), and outfeed table (5m). Technical data: Minimum cutting length: 880 mm. Cutting width up to 600 mm. Cutting height up to 160 mm. Saw blade diameter up to 500 mm. 90 kW motor. Kjdpfxoynbtye Ahvslp

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, height adjustment type: mechanical, total length: 17,000 mm, total width: 2,500 mm, total height: 1,000 mm, saw drive: 31,000 W, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Year of manufacture: 1989 5-meter driven conveyor rollers 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Max. 63 A 31 kW Klsdpfewa T Dcsx Ahvop Please contact us if you are interested or have any questions.

Condition: good (used), Year of construction: 1995, Longitudinal circular saw, Swiss manufacturer, with max. 5.1 m cutting length with lamella carrier max. cutting width 450 mm max. cutting height 160 mm Kjdpfxewugihs Ahvslp hydraulic feed motor

Condition: good (used), Year of construction: 1995, max. cutting length 6200 mm max. cutting width 600 mm max. cutting height 170 mm motor 11 kW Klodpfxsxiu Dto Ahvjp

Condition: used, workpiece length 1.500 – 5.000 mm work piece width 200 – 1.000 mm Kljdpfxjw Nnwhj Ahvop workpiece height 45 – 160 mm

Condition: used, cutting width ca. 700 mm Cutting length ca. 5.200 mm Dimensions (L/W/H) Auf Anfrage Kjdpfxox D U Sao Ahvjlp Jrion HMS rip saw for precise rip cuts in solid wood, panel material, and wood composites.

Condition: excellent (used), Storti RM 500 edger - Italian production - year of production 1993 - electric spacing of discs TECHNICAL PARAMETERS: - cutting width max 435 mm - cutting height max 170 mm - engine power 2 x 22kW - max element width 600 mm - minimum material length 800 mm - max disc diameter 600 mm - spindle diameter 40 mm - two upper pulling rollers - one upper pressure roller - roller motor power 2 x 1.1 kW - roller pressure with automatic jump - seven bottom pulling toothed rollers - electric disc adjustment - two lasers - feed speed 25 and 50 m/min - feeding table 2950 mm Klodpfxjk Talps Ahvjp - receiving table 3000 mm - drive rollers D100 mm - power of the roller feed motor 2 x 1.5 kW Transport dimensions 500x240x180 cm weight 3500 kg

Condition: used, Year of construction: 1983, functionality: fully functional, Vertical resaw and slitting band saw Manufacturer: Raimann Type: B 11 Year: 1983 Roller diameter: 110 mm Roller width: 100 mm Speed: 580 rpm Motor: 18.5 kW Cutting width left/right of blade: each 200 mm Cutting height: 200 mm Variable feed 10–40 m/min, 1.5 kW Klsdpfxeyka I Ij Ahvsp Length of band saw blades: 6300–6500 mm Electro-motorized blade tensioning Hydraulic roller carriage adjustment

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm cutting height 100mm Total connection 39kW Kledpfx Aeucnukjhvop

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; Ksdsirmulspfx Ahvslp 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009

Condition: used, Year of construction: 1996, functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 350 mm, Multiblade + trimmer CML mod J 350 RT Ce kW 37 Kjdpfxsvlxbxe Ahvelp

Condition: as good as new (ex-display), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Kodpfot E Nw Tex Ahvelp Other similar roller tables also available.

Condition: used, Year of construction: 1994, Edging machine / Double edger EWD Esterer Model: DK90 TL 1000 Year of manufacture: 1994 Maximum feed width: 1000 mm Maximum cutting height: 120 mm Total of 3 saw blades 2 saw blades adjustable Measurement system: Combimes With S-type conveyor With cross-cut saw Ksdpoyam Exjfx Ahvslp With infeed unit Esterer ARS TR With 2-strip chip separator Machine can be fully overhauled upon customer request! Already dismantled and ready for loading at any time Location: Austria, near Leoben

Condition: good (used), Year of construction: 2005, Longitudinal saw in very good condition from a Swiss operation max. cutting length: 6200 mm max. cutting width: 420 mm Ksdpfox E Nplex Ahvslp max. cutting height: 170 mm with laser with control system

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 180 mm, saw blade diameter: 550 mm, working height: 850 mm, We sell 1 x JRIMAC UKS 750 under-table cross-cut saw Cross cuts: 50x800 - 160x360mm - 170x250 Max. cutting height: 180mm Klodpfsfl Imasx Ahvop Saw blade: 550mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 180 mm, cutting width (max.): 150 mm, saw blade diameter: 550 mm, We sell 1 x JRIMAC UKS 450 under-table cross-cut saw Cross cuts: 40x440 - 100x340mm - 160x120mm Max. cutting height: 170mm Saw blade: 550mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed Klsdjrfudnspfx Ahvjp - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: used, Year of construction: 1962, functionality: fully functional, Adolf John Hanau AB II Timber saw Wood saw Trimming saw center height 105mm, column throat 650mm, 160mm width, conveyor belt 5-45m/min From first owner ! Weight with conveyor approx. 1250Kg Connection to 400A 32A Kedpfxouprqws Ahvelp Used, functional condition

Condition: not inspected (used), Year of construction: 1981, machine/vehicle number: 3124, functionality: unexamined, Edging saw Esterer DKV-5S The machine has already been dismantled Year of manufacture: 1981 55 kW saw motor Without electrical installation With extraction system ASV/B Year of manufacture: 1981 Kedpfeuy Ib Ijx Ahvjlp The machine is being sold as is.

Condition: used, Esterer DKV -160mm cutting height -with 2 mobile saws and 1 fixed saw Kodpewtclisfx Ahvelp -lath bush -splinter separator

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Slab cutting machine with two blades. The machine has never been used. Klsdpjxywmrjfx Ahvop

Condition: good (used), Further information available upon request. Kljdpswkr Hdefx Ahvop

Condition: used, functionality: fully functional, Sawmill for sale: The line starts with a Bongioanni bandsaw and a Costa Multiprisma sawmill. Due to their design, they are suitable for processing both soft and hard hardwoods. The price includes the lines, additional machines (dust extraction, recycling machines) as well as the necessary saw blades and spare parts. The sawmill can be viewed in Cegléd, Hungary, by prior arrangement. Line 1: - 1-1 Log yard with single-sawn saw - 1-2 Costa Multiprisma: 280 two-axis prism saw with log turner, 60-80 m3/8 hours depending on the wood species and diameter - 1-3 Roller conveyor with discharger - 1-4 Custom-built cross-cut saw: for single-size cutting, with size adjustment option. - 1-5 Conveyor belts for transporting lump waste. - 1-6 Grinder (drum) - 1-7 Grinder conveyors: screw conveyor, bucket elevator, chute, direct loading onto wagon/truck 2nd line: - 2-1 Log store with splitter - 2-2 Log conveyor track, with drop-off - 2-3 Intermediate log store with splitter - 2-4 Bongioanni log splitting bandsaw and trolley, with 1300 digital control, multiple size presetting options, sheet deflection indicator, laser ruler, 25-45 m3/8 hours; depending on the type of wood, diameter and cut pattern - 2-5 Roller conveyor with ejectors - 2-6 Cross conveyor with singler - 2-7 Storti TGS-78 cutting saw: with digital control, three saw units for up to double the size of the cut - 2-8 Roller conveyor with graders - 2-9 Intermediate prism magazine - 2-10 Roller conveyor - 2-11 Costa Leopard II. series cutter, with 2-axis automatic feed and power control - 2-12 Roller conveyor with ejector and sorting table - 2-13 Conveyor belts for lump waste - 2-14 Grinder (drum) - 2-15 Grinder conveyors: screw conveyor, bucket elevator, rédlers (walking floor truck loading option) 3. Auxiliary machines: - 3-1 E. Gillet slitting band saw, associated conveyors, manipulator, feed mechanism - 3-2 Joiner's band saw (800) - 3-3 Pallet cube cutting machine (starboard) Klsdpfjv Hm T Sex Ahvsp - 3-4 SOCOLEST Valdoi double edge circular saw, with conveyors, cutting circular saw - 3-5 VEB STANDARD single-axis formatting circular saw - 3-6 STVO single-axis formatting circular saw machine