Used Holz Her 1401 for sale (159)

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Condition: unchecked Bjdpfoyq T Injx Aa Eewi Equipment and technical data: - Edgebanding thickness: 0.3-5 mm - Workpiece thickness: 6-45 mm - Minimum workpiece width: 60 mm - Minimum edge length: 200 mm - Feed rate: 11 m/min - Electrical connected load: 3.4 kW - Extraction port: 100 mm - Air requirement: 550 m³/h - Glue system: cartridge 1906 - Trim saws, front and rear: 1975 - Radius milling unit, top and bottom: 1942M - Radius scraper, top and bottom: 1929 - Buffing unit: 1941 K - Machine length: 3675 mm - Machine width: 1470 mm - Machine height: 1200 mm Weight: 950 kg Availability: short-term Location: 63934 Röllbach

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min Bodewv Uq Ajpfx Aa Eowi - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Shipping possible at additional cost

Condition: used, Year of construction: 2002, with jointing unit Total length: 6,790 mm Depth: 1,145 mm Max. height: 2,264 mm Workpiece support height: 850 mm Edging thickness: 0.4 - 25 mm Max. edging height: 66 mm Min. edging length: 200 mm Min. workpiece width: 60 mm Min. workpiece length: 140 mm (with 60 mm workpiece thickness) Max. workpiece length: approx. 6,000 mm Workpiece thickness min./max.: 6/60 mm Air requirement: 3,000 m³/h Extraction port diameter, main machine: 160 mm Extraction port diameter, jointing unit: 125 mm Weight: approx. 2,800 kg Storage location: Supplier Bwodeypwk Dopfx Aa Eei

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Cutting height 2200 mm x cutting length 5300 mm (Edging height / max. horizontal cutting height 2110 mm) PowerPackage 400 V The package consists of the following options: 1. TRK extraction unit 2. SuperCut scorer Bwodpjynpc Asfx Aa Eji 3. Vertical digital display 4. Stepless speed control (9 kW output) Pneumatic aluminum slatted support Medium workpiece support on all fields Strip stop for recurring horizontal cuts Digital measurement display for horizontal cut at control panel Visible cut line laser Paper storage compartment Narrow parts device (2 pieces) Location: Solingen Availability: Short-term

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Equipment and technical data: Bsdpfeyncpvjx Aa Eewi - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Bwodpfx Aajw I U E Ao Esi Availability: Short-term

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Bwedpfsw Nac Asx Aa Eei Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: excellent (used), Year of construction: 2008, Nabízíme k prodeji velmi zachovalé CNC obráběcí centrum HOLZ-HER EASY-MASTER 7018K. Stroj je zkontrolovaný, pravidelně servisovaný a připravený k okamžitému použití. 🔧 Výbava a přednosti stroje: • Výkonné hlavní frézovací vřeteno 6,5 kW (HSK 63 F) • Vrtací agregát: - 10 vertikálních vřeten pro vrtání do plochy - 4 horizontální vřetena pro vrtání do hran (2× osa X, 2× osa Y) • Drážkovací agregát s pilou • Silná vakuová vývěva BECKER • Zásobník nástrojů: 8 pozic + paměť na 6 nástrojů mimo stroj • Přehledný ovládací sloupek, dálkové ovládání • Intuitivní řídicí software CAMPUS • Sada vakuových přísavek + Bonus - otočné přísavky ⚙️ Konstrukce • Vysoce přesné zakryté lineární vedení, chráněné proti prachu a nečistotám • Dlouhodobě stabilní přesnost, vysoká tuhost a dlouhá životnost 🚚 Dodání a servis • Zajistíme dodání stroje na klíč: • doprava • instalace • seřízení • zaškolení obsluhy • Samozřejmostí je zajištění náhradních dílů, spotřebního materiálu, maziv a pravidelný servis. 💰 Cena: dohodou 🧾 Možnost odpočtu DPH 📦 Dostupné ihned Bwedpfx Ajyc Ullja Eji

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, We offer for sale a very well-maintained HOLZ-HER 6210 panel saw center. The machine has been inspected, regularly serviced, and is in very good technical condition. 🔧 Basic parameters: • Working cut dimensions: 4250 × 3850 mm • Overall machine dimensions: 6636 × 4420 × 1980 mm Bsdpfxoydn Rqo Aa Eswi • Main motor: 11 kW • Scoring motor: 2.2 kW • Manual mode, EasyPlan, cutting optimization ⚙️ Construction: • Robust frame and precise guides • Stable and accurate operation even with larger panel sizes

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design – Edge thickness 0.4 – 6 mm SPS screen control Edge-Control PPC 221 color display Pre-milling unit for prepping before the gluing station Fully automatic edge magazine for both roll and strip materials GLU-JET adhesive application station for EVA and PUR glue, suitable for cartridges or granules + PU Adhesive application via nozzle technology Workpiece height 6–65 mm Automatic glue height adjustment 1912-3 pneumatic pressure unit 1918 pneumatic end-trimming unit for roll and strip material, edge thickness up to 8 mm Pneumatic adjustment from 0–10° for miter saw angle 1827 MOT 4 milling unit for flush trimming (8 mm), radius and chamfer milling – 15°; 1827 MOT NC-controlled axes via control panel 1832 SPS corner rounding unit for rounding edges up to 3 mm edge thickness in through-feed Bwjdpfxeymdays Aa Eji Scraper unit for chamfers and radii with 2 motorized scraper holders Surface scraper unit – finishing Spray system – PU Complete DIA tool package included Machine is FULLY REFURBISHED and in TOP CONDITION Available from stock in Lieboch

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Bedevvkfdopfx Aa Ejwi

Condition: used, Storage location: Nattheim Bjdpjvvkrdsfx Aa Ejwi

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Bsdpfx Aasvvi R Es Eewi Storage location: Nattheim

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Bodpfxevvkg Ie Aa Eewi

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Bwodpfx Aevvi Spoa Eei

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Bedpev Sv Enofx Aa Eowi Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 Bwsdeu R Sy Ajpfx Aa Esi - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, cutting width (max.): 3,100 mm, saw blade diameter: 300 mm, section length (max.): 3,100 mm, Equipment: CE marking, scorer, HOLZ-HER Pressure Beam Saw LINEA 6015 Cutting length 3100 mm x cutting width 3100 mm Saw blade projection 68 mm Grooves up to 25 mm (bi-directional) 7.5 kW main saw motor 2.2 kW scoring saw motor 3 air-cushion tables 1800 mm with feed rollers Cut-out & recess device (for window cut-outs and insertion grooves) Side pressure, program-controlled Eco mode Handheld control device Label printer and software Easy-Plan optimization (upgrade and office version available) and much more... 12-month warranty Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our distribution warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/en/terms-and-conditions. Bwjdpfeyngt Ssx Aa Eei

Condition: used, functionality: unexamined, machine/vehicle number: 1205, input voltage: 380 V, Used Holz-Her 1205 Vertical Panel Saw – Wall Saw – Panel Saw with Saw Blade Manufacturer: HolzHer Bwjdexiwvlopfx Aa Eoi Model: 1205 Cutting range: 445 cm width, 175 cm height Voltage: 380 volts.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Working area X: 4520 mm Working area Y: 1600 mm Working area Z: 300 mm 5-axis electrospindle unit, 12 kW power, liquid-cooled, HSK 63F interface Vertical drilling heads: 18 Bedjyl Uw Hjpfx Aa Eewi Horizontal drilling bits X: 4 Horizontal drilling bits Y: 2 Slotting saw in X direction 18-position tool changer (carousel) 1-position tool changer for saw blade Worktable with 8 bars WS8 clamping device, 200 mm Software: Campus V7 Plus CAD/CAM Vacuum pumps Safety platforms Red laser push button Remote control panel PC-based control system Automatic centralized lubrication

Condition: used, Holz Her Sprint 1329 Power Heavy-duty design – edge thickness 0.4 – 8 mm (15 mm with tool change) 21.5" PPC 332 touchscreen control fa.s.t. setting technology “Set-up on the fly” Motorized, CNC-controlled bridge height adjustment Fully automatic edge magazine for roll and strip material (MOT) Pre-milling unit for jointing before the gluing station GLU-JET glue application station – for cartridge, granulate & PU adhesive, thin film technology Maximum edge height: 60 mm Adjustable glue height / sensing nozzle Pressure unit 1913, motor-driven and pneumatic NC servo axis End trimming unit for roll and strip material up to 15 mm edge thickness With electro-pneumatic adjustment of the end saw angle from 0-10° MOT6 multi-function milling unit – 6 NC-controlled axes: Flush trimming 8 mm (15 mm) Radius milling Bevel milling 0–15° pneumatically MOT4 copying milling unit – 4 NC axes, corner copying, postforming corners: for machining the upper and lower longitudinal edge, and copying the front and rear vertical edges; working height 60 mm, includes shelf program MOT4 scraper unit Flat scraper unit – finish with pre- and post-sensing Buffing unit for final cleaning and edge polishing with 2 textile discs, tiltable by 5° Spray units for entry and exit section as well as antistatic agent at the pressure unit Entry section: electronically controlled separating agent spraying system Pressure unit: electronically controlled antistatic spraying system Exit section: electronically controlled cleaning agent spraying system with detergent Air cushion table at feeding side / L = 1800 mm, W = 600 mm First delivery in 2022 Machine is WORKSHOP TESTED and in TOP CONDITION Bjdpfoyi Algsx Aa Eowi Available ex stock Lieboch

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Bsdeylpwujpfx Aa Eewi Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Equipment and technical specifications: Cutting range: - Cutting length: 4300 mm - Cutting height: 2100 mm - Cutting depth: max. 60 mm Extraction: - Saw unit: 120 mm - Frame end: 100 mm Workpiece support: - Stable plastic support for optimal stability, even for narrow workpieces - Chips are removed via inclined slits Roller transport system: - Manual operation for easy and gentle material transport Indexing: - Manual, vertical and horizontal Feed: Bsdpoxllv Ejfx Aa Eswi - Manual, vertical and horizontal Saw blade: - Tungsten carbide (HM), 250 mm, hollow flat tooth, 48 teeth Saw motor: - 4 kW at 5450 rpm, 400 V, 50 Hz Cross-cut fence: - Includes workpiece support for narrow parts (4 fields) Extraction system according to BG guidelines TRK (below 2 mg fine dust / m³ air) Includes a set of new supporting strips Dimensions: approx. 5100 x 1100 x 2600 mm Weight: approx. 1100 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Holz Her Auriga 1308 XL Compact design – Edge thickness 0.4 - 8 mm SPS screen control Edge-Control, PPC 319W, 18.5" touchscreen monitor iTronic adaptive pressure and glue quantity control with flushing routine Pre-milling unit for jointing before gluing Fully automatic edge magazine for coil and strip material Glue application station GLU JET cartridges + PU gluing, with tracing nozzle Workpiece height 8-60 mm High gloss package Pneumatic pressure unit Pneumatic end trimming unit for coil and strip material up to 8 mm edge thickness, with pneumatic swivel from 0-10° angle of the end trimming saws Multifunctional milling unit 1827 MOT4 for flush trimming up to 8 mm, radius milling and 15° chamfer milling via NC axes Corner rounding unit – rounding corners up to 3 mm edge thickness, working height 12–60 mm, postforming possible Scraper unit 1929 MOT4, for chamfers and radii with 2 scraper holders via NC axes Surface scraper unit FK701 with pre- and post-sensing – finish Bsdpfx Aasyh Ilyo Eswi Buffing unit – polishing Spraying device at infeed and outfeed Spraying unit with lubricant for high-gloss edges Complete DIA tool set included First delivery in 2021 Machine is in TOP CONDITION from business closure – small company Available from stock in Lieboch

Condition: like new (used), functionality: fully functional, AUTOMATIC EDGEBANDER machine model HOLZHER STREAMER 1057 second hand machine working condition : Excellent , like new Declaration of CE-conformity Conformity marking CE mark with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , solid wood max.mm.6 for furniture, furnishings, kitchens, bathrooms, doors, panels and various Control HOLZ-HER KPL volt. 400/50 technical details: min. height of gluing panel mm.8 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 min. panel width mm.65 min. panel length mm.160 max.feed speed: 10 mt./min. support for large panels soundproof cabin glue system cartridge Composition machine . units : 1.Magazine for single strips HOLZ-HER Edge magazine 1903 2.Premilling unit . HOLZ-HER Premilling unit FG 201 3.Trimming saw 2 motors . HOLZ-HER Trimming saw 1918 PNEU 4.Flush/radius/chamfer milling units . 2 motors . HOLZ-HER Fine milling unit 1827 MAN 5.Corner rounding unit . HOLZ-HER Corner rounding unit 1832 . 1 motor Bedpfjyk E Dzjx Aa Eowi 6.Scraper unit . Profile scraper, Flat scraper . HOLZ-HER Profile scraper unit 1929 HOLZ-HER Flat scraper unit 1964