Condition: good (used), Year of construction: 1972, functionality: fully functional, Drawing slide force: approx. 800 Mp Blank holder force (die cushion): 320 Mp Drawing slide stroke: 900 mm Blank holder stroke (die cushion): 400 mm Maximum distance between table and slide: 1920 mm Table size: 3200 x 2000 mm Clear opening on the loading side: 3250 mm Table height above floor level: 400 mm Overall height above floor level: 6300 mm Drive power: 100 hp Machine weight: 153 tons Chsdpfx As Ah Squsbaed

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1,200 mm Table size: 2.600 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum daylight (clamping surface to slide): 1.350 mm Minimum shut height: 250 mm Stroke speeds: Rapid traverse (downward): 140 mm/sec Rapid traverse (upward): 140 mm/sec Csdpfx Abe Ah Sk Ijaehd Working speed: 16–50 mm/sec Operating pressure: 300 bar Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: used, Year of construction: 2001, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: HZPUI-T2300, feed length X-axis: 10,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 30,000 mm, ram adjustment: 10,000 mm, installation height: 54,000 mm, total width: 80,000 mm, total length: 90,000 mm, drop-through hole in table: 32,000 mm, input voltage: 380 V, overall weight: 5,400 kg, DGUV certified until: 08/2026, control voltage: 380 V, product height (max.): 5,000 mm, year of last overhaul: 2025, sheet thickness steel (max.): 2,000 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 3,000 mm, Equipment: 4th hydraulic function, SchulerUsed German Schuler hydraulic press, model HZPUI-T-2300/1700, manufactured in 2001. Nominal force 23000kN (2300 ton), bolster size 4600×2500 mm, total weight 540 ton, power 1600kW, HLP46 hydraulic oil. Heavy duty for automotive panel, deep drawing. Csdpfo Afapkex Abaehd

Condition: used, Year of construction: 1976, machine/vehicle number: 8841, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressing force: 25 t Pulling force: 10 t Total power requirement: 11 kW Machine weight: approx. 3 t Stroke and working data Overhang: 260 mm Stroke: 500 mm Pulling stroke: 200 mm Table Table size: 500 × 500 mm Dimensions Space requirement: approx. 1.40 × 1.10 × 2.80 m Cjdpfxo Aa Nyne Abaohd EQUIPMENT Very robust design Two-hand operation Analog pressure gauge

Condition: used, Year of construction: 1979, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: electro-hydraulic press Machine weight: approx. 5 t Performance Data Pressure: 63 t Stroke: 315 mm Ram stroke: 200 mm Piston stroke: 200 mm Installation height: max. 450 mm Retraction force: 1.3 t Speeds Closing speed: 210 mm/min Return speed: 210 mm/s Table and Ram Table size: 710 × 630 mm Ram clamping surface: 710 × 630 mm Drive Cjdpe Aa Ndyofx Abajhd Drive power: 15 kW Motor speed: 1,500 rpm Electrical Data Operating voltage: 380 V Control voltage: 220 V Dimensions Overall height above floor: 2,500 mm Overall width: 1,000 mm Depth: 1,600 mm EQUIPMENT Electro-hydraulic press control Fixed safety valve with overload protection Safety interlock Two-hand push button Emergency stop mushroom push button Infinitely adjustable stroke adjustment Infinitely adjustable pressure regulation Fully automatic continuous operation Mechanical, infinitely adjustable fixed stop in the cylinder Handwheel for stop adjustment with display scale Automatic star-delta starter

Condition: ready for operation (used), Year of construction: 1964, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Clamping force: 68.6 kN Table Table dimensions: 600 × 600 mm Number of slots: 4 Electrical data Chedpe Advcdsfx Abasd Operating voltage: 380 V Connected load: 4 kW Power: 1 kW MACHINE DETAILS Manufacturer: Reis Type: 60A/7H Machine number: 48/64 Year of manufacture: 1964 Machine type: Embossing press Dimensions and weight Length: 1,500 mm Width: 1,300 mm Height: 3,000 mm Weight: 3,000 kg EQUIPMENT 4 slots in the table

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: fully functional, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18T). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm, to accommodate different tools and material profiles. Additionally, a Siemens-manufactured Bruderer U control system is installed. The machine is partially functional: The buttons responsible for the two-hand operation respond with some delay in setup mode when threading the material. The machine's spring dampers are worn, causing the machine to vibrate during continuous operation, which does not affect production. The rubber mounts for the slides are brittle and are breaking off. The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18T) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Csdjz H H Dqepfx Abaehd Main drive: 16 kVA Power supply: 400V / 50Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine will be dismantled in week 46. Removal is planned before the end of December, as a crane will already be on-site by then to load the machine.

Condition: used, Year of construction: 1998, machine/vehicle number: 845, functionality: fully functional, pressing force: 106 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 650 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm Chodpfx Ao Ad H S Aobaod For sale is a hydraulic 4-column stamping press from the manufacturer ALN with a maximum pressing force of 106 T. The machine has a table size of 1,700 × 1,200 mm, an open height of 1,450 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, inserting, and assembly work in industrial applications. ##### Technical data + information: Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm ==== General information - Reference ID: TPT-09 - Manufacturer: ALN - Type: Hydraulic 4-column stamping press - Model: 4 SPY 60 SO - Machine number: 845 - Year of construction: 1998 - Pressing force: 106 T - Table size (usable area): 1,700 × 1,200 mm - Table height: 650 mm - Open height: 1,450 mm - Stroke: 1,000 mm - Overall height: 3,992 mm - Overall width: 2,645 mm - Overall depth: 1,965 mm - Total weight: 12.5 T - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 243 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s ==== Hydraulics & drive - Main motor: 25 kW - Oil tank: 650 l ==== Safety and equipment - Slug damping: yes - Maintenance platform: no ==== Documentation - Hydraulic diagram - Electrical diagram - Operating manual ##### Application areas: Stamping, forming, straightening, inserting, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic 4-column stamping press, 4-column stamping press, hydraulic press, ALN press, 4 SPY 60 SO, 106 T press, 106-ton press, forming press, stamping press, straightening press, inserting press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of custom machines and press automation. We distribute tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Pressing force: 63 t Speed range: 140–800 min⁻¹ Ram stroke: 6–60 mm Ram adjustment: 80 mm Pin hole diameter: 40 mm Table Table dimensions: 800 × 580 mm Table slots: 6 Feed Feed length: 160 mm Material width: 160 mm Belt speed: 80 m/min Belt cross-section: 500 mm² MACHINE DETAILS Manufacturer: Haulick + Roos Csdpfj Adzqajx Abaohd Type: RVD63-800 Year of manufacture: 1982 Machine number: 282612 Dimensions (L × W × H): 3,500 × 2,400 × 3,000 mm Weight: 6,000 kg EQUIPMENT Feed

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 1, 2026, and December 10, 2026! TECHNICAL DETAILS General Information Machine type: Single-column eccentric press Machine weight: approx. 5.5 t Performance Data Pressure: 63 t Stroke rate: 120 strokes/min Csdps Achxbjfx Abashd Stroke and Working Data Overhang: 250 mm Stroke: 8–100 mm Installation height: 330 mm Ram adjustment: 63 mm Table and Clamping Surfaces Table: 715 × 500 mm Clamping plate: 700 × 480 mm Through-hole in the table: 240 mm Through-hole in the clamping plate: 110 mm Ram clamping surface: 450 × 280 mm Tilting Design Tilting stages: 4 Through-hole to the rear: 325 × 500 mm Through-hole downwards: 360 × 160 mm Additional Clamping Plate Dimensions: 700 × 480 × 850 mm Dimensions Space requirement: approx. 1.2 × 1.7 × 2.7 m EQUIPMENT Hydraulic adjustment system for tilting the press Central lubrication via hand pump Additional clamping plate Two-hand operation Foot pedal release can be configured Operating mode selector switch for setup, continuous stroke, and single stroke Emergency stop switch Part counter Various accessories

Condition: like new (used), Year of construction: 1988, machine/vehicle number: 2240 & 2250, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 150 t, stroke length: 180 mm, operating speed: 12 mm/s, reverse speed: 160 mm/s, table width: 410 mm, table length: 540 mm, clearance between the columns: 300 mm, oil tank capacity: 300 l, total length: 1,010 mm, total width: 1,130 mm, total height: 2,435 mm, overall weight: 2,600 kg, Equipment: documentation/manual, Two EXNER 150T hydraulic presses are available for immediate sale and can be viewed at our workshop in Peschadoires, central France. Both presses are in excellent condition, as shown in the attached technical specifications and photos. Operating manual and technical documentation are available for each machine. Chjdpfj Ahq Duex Abasd Price upon request.

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Exner Type: HA SP-340 SS Year of manufacture: 1968 Machine number: 1 PRESS DATA Press force: approx. 34 t Table dimensions: 1,000 × 800 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Chodpfxo Adu Ule Abasd Width: 2,000 mm Height: 3,200 mm Weight: 8,000 kg

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: SIEMENS, Hydraulic dross press manufactured in 2021. This ALTEK TARDIS Gen II Model 100 features a maximum working pressure of 160 bar and a furnace sill height of 1,200 mm. It includes 10 ALTEK 181S Type Rhino Cast Steel Dross Pans with a volume of 0.12 m³ each, along with fume dust filtration and Siemens control. If you are looking to get high-quality dross press capabilities, consider the ALTEK TARDIS Gen II Model 100 machine we have for sale. Contact us for further details. • Machine: Dross press Cedps Ah D Iyjfx Abaohd • Max. working pressure: 160 bar • Furnace sill height: 1.200 m • Door width: 2.000 m Additional equipment • 10 pcs ALTEK 181S Type Rhino cast steel dross pans, volume 0.12 m³ (approx. 181 kg) • Fume dust filtration Technical Specification Stamping Force 1000 Kn

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: Foot pedals and push buttons on the control panel -Pressing force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electric unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with foot: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (cross member): 245 mm -Cross member adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross member via hand crank (no manual lifting required) -Hydraulic unit can be moved sideways: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 pressure dies with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction Chjdpfxoztfbwe Abajd -Includes work light to illuminate the working area -Pressure indication via pressure gauge -2 prism supports included in delivery -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 290 kg Errors and omissions excepted.

Condition: used, Year of construction: 1967, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 80 t Stroke rate: 125 strokes/min Total power requirement: 9.5 kW Machine weight: approx. 4.4 t Stroke and ram data Stroke: 20–120 mm Ram dimensions: 560 × 355 mm Ram adjustment: 72 mm Working area Overhang: 280 mm Table Table width: 710 mm Chedpfj Aa Ntnex Abasd Table depth: 560 mm EQUIPMENT UVV – accident prevention regulation

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Haulick + Roos Type: RVD 63-800 HS/CNC Year of manufacture: 1980 Machine number: 1,202,097 Machine type: Punching press Press Data Press force: 630 kN Speed range: 30–800 rpm Drive power: 26 kW Stroke: 4–60 mm Stroke adjustment: 80 mm Die hole: 52 mm Table Table dimensions: approx. 800 × 600 mm Table slots: 4 MACHINE DETAILS Cjdpfx Ae Adzicsbashd Dimensions and Weight Length: 2,500 mm Width: 2,000 mm Height: 2,400 mm Weight: 6,000 kg EQUIPMENT Integrated guiding system by Haulick + Roos

Condition: used, Year of construction: 1970, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 63 t Stroke: 250 mm Travel: 8–100 mm Stroke rate: 140 strokes/min Total power requirement: 7 kW Machine weight: approx. 3.5 t Table and ram Table depth: 710 mm Chsdpe Aa Nahjfx Abasd Table width: 500 mm Ram dimensions: 450 × 280 mm Ram adjustment: 63 mm EQUIPMENT No information available regarding accessories.

Condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Profi Press: Portal presses, straightening presses, and other custom-made hydraulic presses for large and specialized projects. *Do you have a large workpiece or a specific pressing application? We build the press to meet your requirements.* RHTC supplies custom-made hydraulic portal presses/straightening presses for processing large and heavy workpieces. From an extra-long work table (recently delivered a 200-ton model with a 5000 x 4500 mm table size) to multiple portals and cylinders: we discuss your application and, together with you, develop a suitable design. *Custom-made solutions for your product and process.* Depending on the application, we can customize, among other things: - Press force and table dimensions - Working width, free working height, and cylinder stroke - Number of portals and cylinders - Manual or motorized movement of portal and cylinder - Hydraulics, electrical design, and controls - Software for setting and storing various parameters In this way, we tailor the machine to the dimensions of your product, the required process, and the way you want to work. *From a special portal press to a larger industrial project* Our realized projects include portal presses with long and wide work tables, designs with two portals and two cylinders, and presses for pressing large shafts out of gearboxes. Even with extensive custom-made projects, the design starts with your application. We discuss the requirements, develop the design, and submit the technical drawings for your approval before production begins. *Customization across our entire machine range* Codpj Ah El Sjfx Abashd Our capabilities extend beyond portal presses. You can also request custom-made solutions for other types of hydraulic presses, from small to large, from our range. We assess each project to determine which modifications are technically feasible and appropriate. This includes hydraulic workshop presses with a wider working width (including a sliding cylinder), C-frame presses for performing tests in a laboratory, production presses for compacting powder, arch presses for shipbuilding, and four-column presses for very precise pressing operations. *Discuss your project with RHTC* Send us your application, workpiece dimensions, and desired press force via the contact request in this advertisement, if known. If possible, include a drawing or photo. This will allow us to assess your request and discuss a suitable design and quote. You can also submit your request via the contact form on the RHTC website. The photos show examples of realized custom-made solutions. The design and specifications offered are determined per project.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 32 t Stroke: 0–40 mm Stroke rate: 140–1,200 strokes/min Table dimensions: 550 × 500 mm MACHINE DETAILS Manufacturer: Haulick + Roos Type: RVD32-540 Chjdpfx Abs Adzp Njajd Year of manufacture: 1983 Machine number: 282047 Operating voltage: 380 V Control voltage: 22–24 V Rated current: 70 A Dimensions (L × W × H): 3,000 × 2,000 × 2,400 mm Weight: 4,000 kg EQUIPMENT Feed device: Haulick + Roos

Condition: like new (used), machine/vehicle number: 3160 & 4159, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 360 t, stroke length: 60 mm, table width: 525 mm, table length: 430 mm, distance table to ram: 340 mm, total length: 2,200 mm, total width: 1,600 mm, total height: 2,250 mm, overall weight: 6,300 kg, Equipment: documentation/manual, safety light barrier, Two Gräbener GK360 knee presses are available for immediate sale and can be viewed at our workshops in Peschadoires, central France. Both presses are in excellent condition, as shown in the technical specifications and attached photos. User manual and technical documentation are available for each machine. Price available upon request. Cedpfxe Ahqr As Abaehd

Condition: good (used), Year of construction: 1975, pressing force: 250 t, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Chedpfx Abe Ahxlqsajd Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: new, Year of construction: 2019, machine/vehicle number: 29, functionality: fully functional, power: 10 kW (13.60 HP), pressing force: 400 t, stroke length: 130 mm, table width: 500 mm, table length: 500 mm, distance table to ram: 375 mm, total length: 2,175 mm, total width: 1,425 mm, total height: 2,855 mm, overall weight: 9,000 kg, Equipment: documentation/manual, 1 BARNAUL knee press, 400-ton capacity, KB 8336 model, available for immediate sale and can be viewed at our workshop in Peschadoires, central France. The press is new and has never been used. Attached you will find photos of the press as well as the technical data sheet. The operating manual and technical documentation are available with the machine. Price upon request. Chsdpfs Ahrgtsx Abajd

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Schaal Type: SEP32 Year of Manufacture: 1980 Machine Type: Punching Machine Press Data Press Force: 32 t Stroke: 8–70 mm Flywheel Diameter: 660 mm Speed: 80–400 RPM Codpo Adu S Rjfx Abashd MACHINE DETAILS Dimensions Length: 1,500 mm Width: 1,200 mm Height: 2,500 mm Weight Machine Weight: 3,000 kg

Condition: repair required (used), machine/vehicle number: 8511147, functionality: limited functionality, operating hours: 26,172 h, input voltage: 380 V, type of input current: AC, pressing force: 35 t, stroke length: 90 mm, table width: 440 mm, table length: 640 mm, ram plate width: 210 mm, ram plate length: 310 mm, Cerini Presse TV 35 in need of repair. The clutch is working, but the brake pads need to be replaced, and the electrical cabinet needs to be reattached. The year of manufacture is unfortunately unknown, but likely around 1990. Chsdpfj Ahhx Rox Abasd

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 30065320, functionality: fully functional, power: 14.71 kW (20.00 HP), pressing force: 50 t, stroke length: 500 mm, operating speed: 63 mm/s, reverse speed: 350 mm/s, table width: 500 mm, table length: 800 mm, throat depth: 250 mm, distance table to ram: 650 mm, oil tank capacity: 235 l, total length: 920 mm, total width: 1,420 mm, total height: 3,100 mm, Equipment: CE marking, documentation/manual, 50-ton swan-neck hydraulic press by Benedetti in excellent condition. Machine available for immediate sale and can be viewed at our workshop in Peschadoires, France. The press is equipped with a new electrical control panel and has a CE marking. A technical file will be provided with the machine. Chods Ahxqvepfx Abaed Please find attached photos of the press and the technical data sheet. Price upon request.