Punch press

BRUDERER BSTA 180

The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180kN (18 tons). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed system that processes strip widths up to 60mm and material thicknesses up to 2mm. The stroke is adjustable between 8 and 40 mm, and the strip insertion height is adjustable between 50 and 100 mm to accommodate different tools and material profiles. In addition, a Siemens-made Bruderer U control system is installed.

The machine is partially functional:
The buttons that control the two-hand operation sometimes react with a delay or not at all in setup mode when feeding the material, which makes the material feeding process time-consuming. The machine's spring dampers are worn out, causing the machine to vibrate significantly during continuous operation.
The rubber mounts for the dies are brittle and breaking off.
The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025.

Nominal force: 180kN (18 tons)
Stroke rate: 100-1300 strokes per minute (variable)
Strip feed: Bruderer BZA 60
Adjustable stroke: 8-40 mm
Main drive: 16 KVA
Power supply: 400V / 50Hz
Table area: 300x400 mm
Strip insertion height (adjustable): 50-100 mm
Max. strip width: 60 mm
Max. material thickness: 2 mm
Machine dimensions: approx. 1300x1000x2300 mm
Weight: 1950 Kg
Operating hours: approx. 47262
Bedpfx Amoz H H Dqerjdh

The listing was translated automatically. Translation errors are possible.