Assembly systems for sale
Your location was not identified (Edit)
3
Fully automatic roller shutter locking machine.
The machine is equipped with 2 magazine heads which allow 2 different deck widths to be processed. This machine is prepared for Alukon.
Bizuhpokxg
The entire production process takes place fully automatically via a PC-PLC control. The profiles - either as individual bars or bundled into mats - are fed into the machine, cut to size and then locked with caps and stainless steel clips. more
3
Projekt V6-Motor, Materialzuführband, Prüfstation, PC, mit Monitor und Tastatur, Prüftisch, mit Prüfaufbau (Eigenbau), mit 2 Federzügen, Steuerung, Hydraulikeinhei
Bfxsh0npz2 more
7
ready for operation (used)
For sale 1 piece Deprag Minimat 310E30-005-S1 393300 D servomotor screwdriver Posi 1 GG40 with torque arm stand, balancers, sensors, for air screw transmission.
Data: Servomotor screwdriver with position sensor stand, for process control, air screw transmission system. POSI 1 Torque arm - GG series, the base of the arm is made of cast aluminum, the arm itself is made of stainless steel bars. Cable extensions can be arranged. The weight is balanced by adjustable balancers. The universal tool hold... more
3
Heller 1707
Power input 3 fase 208/240 Volts
Dimensions: 3400 x 1370 x 1600mm
Weight: 1360Kg
Cooling zones: 1
Heating Zones: 14 (7top 7 bottom)
Heater Wattage per zone: 6000w
2pj9zpzp
Temprature range: 25-350C more
2019
as good as new (ex-display)
7
excellent (used)
Item condition: Used from assembly line for commissioning
Signs of wear: slight signs of wear
Case: Slight scratches, bearing marks
Guarantee in months: 12
Speed: Motor 0 .... 6,000 r/min
Voltage: Usys 400 V
Current: Imax 17,10 A
Protection class(IP): 65
shaft diameter: 16 mm
Shaft end: M 5
Speed (gearbox): i = 16.00
Torque: 85 Nm
Dad2cexa0
Weight: 6.084 kg
Storage location: Rosenfeld
Storage location: P2A3-BS1 more
2
butyl glue applicator 250, for waterproof glueing of both modul-panes, consisting of: 1 transport-, lifting and fixing table, 1 "Kuka" robot, type KR 60-3, y/c 2011, own weight 665 kg, payload 60 kg, overhang 2.033 mm, with glue applicator, 1 butyl-glue applicator pump , incl. touchscreen-control
W9bmo more
5
good (used)
Manufacturer: OKU
OKU
Automatic machine series to the final Assembly
The machine series has over 34 Assembly stations for various work processes.
The moving of the product using a pre-sanding 87 positions conveyor belt.
9d3fkv220
The activity of the workstations is carried out by compressed air.
The controller is Siemens Sinamics PLC.
The machine is already uninstalled! more
10
excellent (used)
For sale 1 piece Deprag Eacy Feed Series 5 1511-EC / 0.75-1 vibrating bowl automatic screw feeder with air screw transmission for automatic screwdrivers.
Condition: USED, EXCELLENT
Data: Screws for automatic dosing. SZG Controller 5 control.
Adjustable vibration to adjust the precise screw transmission, sensor is the screw
Running out. An external 6 bar supply of clean air is required for air transmission of the screw! The air supply must be connected to the quick connector on the internal CPV v... more
8
For sale Draloric /STC capacitors and visible in the picture
Bg73eubtdj
Price per unit
For more information, please call more
9
CNC milling cutters for wire flat machines (4880)
-Frame made of die-cast aluminium and granite
-Automatic tool change
-Conveyors is missing!
Manufacturer: IPE / IPTE
Type: NTM 4133 inline 6000 741
3-phase 400V 5kVA 16A 50 Hz
Year: 2000
Work area: 410 x 330 mm
Board size: 410 * 330 mm
Thickness: 0.8 – 4mm
Feed: 80 mm / sec
Bejtmw3lwq
Milling head Exchange: automatically
Milling head diameter: 0.8 3.1 mm
Pressure / flow of air: 6 bar / 100 l / min
Total size: (s) 1200 * (h) 1600 * (m) 1835 mm
W... more
7
2002
excellent (used)
Item condition: Used from assembly line
Ghxhsqjf
Case: slight scratches, the paint is damaged
Guarantee in months: 12
Speed: 1000 rpm
Voltage: max. 230 AC
Current: 4,75 A
Protection class (IP): 41
shaft diameter: 19 mm
key: 6 x 25 mm
Torque: 16.5 Nm
Weight: 11.26 kg
Storage location: Rosenfeld
Storage place: 10C more
8
excellent (used)
For sale 1 piece Deprag AST30-1-230 automatic screwdriver for process controller, USB, LAN, MINIMAT-EC-Servo screwdrivers, with included cables.
Condition: USED, excellent condition
Data: 32 programmable processes. Precision torque control and sensing, angle of rotation control and sensing, analysis functions.
Can be connected for Profibus, PLC, Ethernet, USB communication.
Can also be fitted to an automatic screw feeder.
Power supply: 230VAC, 400W
Display: 4-line backlit LCD
Display language: E... more
6
2008
used
Mounting device for the merging of cover and sleeve, company IDE automation, type RD-717-1 and RD-717-2, BJ. 08, device is damaged, the turntable is distorted and torn
3e0rt3kr2 more
2
Here we show a machine for "Automatic Blip fastening on wooden rails" in the area of our wide range of standardized and near-standardized machines. Of course each machine can be modified to your special needs. Please contact us for a more detailed offer.
Please notice our other adverts for
- Automatically Assembling of Plastic Caps
- Automatic Plastic Plug Assembly
- Machine for automatically inserting flat springs (sinuous loop springs) into prefinished frames
- Rollpack
- Assembly Tables
Aut... more
8
good condition (used)
Data Brake:
- Fa. Mayr 4/891.124.1 S
- No. J9116131 0924188
- Voltage 24 V DC
Niqogeq
- Brake 6 Nm
- Power 22 W
Item condition: Used from assembly line
Case: slight scratches, the paint is damaged
Guarantee in months: 12
Voltage: max. 230 V AC
shaft diameter: 20 mm
Shaft end: M 6
Transmission ratio: 5:1
Torque: 4 Nm
Weight: 7.02 kg
Storage location: Rosenfeld
Storage place: 10C more
6
2003
excellent (used)
Complete windshield pasting attachment. Comes with Kuka KR 2210 robotics, and complete glueing dosing unit. Further is the assembling desk and a Siemens Touchpanel controlling unit included.
The machine comes from a German carmanufacturer and is in very good condition, immediately ready for work.
Bdntjqodpw
Attachment can also be used for all other glueing applications. more
5
ready for operation (used)
1 pc. PressControl 500, PRC 500 Pneumatic control unit for sale.
Condition: USED, The plastic seal on the front panel is incomplete, the key works but can fall out. At start-up, after the spare battery is empty (Pufferbatterie leer) message and beep, the machine can be used by pressing Enter and it is working properly.
Specifications: Precision, safety pneumatic, hydro-pneumatic press controller.
With built-in counter and preset counter functions.
Without other accessories!
Debjoc37y
... more
2
Here we show a machine for automatically assembling of plastic caps in the area of our range of standardized and near-standardized machines. Of course each machine can be modified to your special needs. Please contact us for a more detailed offer.
Please notice our other adverts for
- Automatic Clip fastening on wooden rails
- Automatic Plastic Plug Assembly
- Machine for automatically inserting flat springs (sinuous loop springs) into prefinished frames
Oxsaheynv
- Rollpack
- Assembly Tables
... more
7
Item status: New from stock
Guarantee in months: 12
Capacity: 2 kW
Protection class (IP): 65
shaft diameter: 35 mm
flange diameter: 115 mm
Bhjvtz0nr3
pitch circle diameter: 200 mm
Input: 3AC 134V 10A
Speed (max): 3000 rpm
Weight: 16.77 kg
Storage location: Rosenfeld
Storage location: P2C3 more
6
good (used)
2
Here we show a Automatic Plastic Plug Assembly Machine in the area of our wide range of standardized and near-standardized machines. Of course each machine can be modified to your special needs. Please contact us for a more detailed offer.
Please notice our other adverts for
- Automatically Assembling of Plastic Caps
- Automatic Clip fastening on wooden rails
- Machine for automatically inserting flat springs (sinuous loop springs) into prefinished frames
- Rollpack
- Assembly Tables
This mach... more
8
good condition (used)
Specification
- With integrated speed controller for 4-quadrant operation
- With brake
Item condition: Used from assembly line
Case: No scratches, the paint is slightly damaged
Guarantee in months: 12
Speed: 3090 rpm
Voltage: 24 V DC
Protection class (IP): 65
shaft diameter: 8 mm
Shaft end: Smooth
Weight: 2.125 kg
Gv7uyo
Storage location: Rosenfeld
Storage place: 21B21 more
11
Here we offer modular speed Mounter an IPE benefit separation module.
PC-based CNC PCB machines
The modular high-speed Mounter allows the high-speed Assembly of special components
Befwh3dz0s
Subassembly production benefits disconnect
The engineering modular in the truest sense of the word the benefit of NTM breakers are 4133 family.
All variants are based on a granite base with linear-motor-driven axes,
Dust extraction, CNC and PC operating surface.
Nominal voltage 3x400VAC/50 Hz + N + PE
Power... more
2
Here we show a Machine for automatically inserting flat springs (sinuous loop springs) into prefinished frames in the area of our wide range of standardized and near-standardized machines. Of course each machine can be modified to your special needs. Please contact us for a more detailed offer.
Please notice our other adverts for
- Automatically Assembling of Plastic Caps
- Automatic Clip fastening on wooden rails
- Automatic Plastic Plug Assembly
- Rollpack
- Assembly Tables
Machine for autom... more
8
Item status: New from stock
Scope of delivery: With cable set and aluminium plate
Guarantee in months: 12
Cable length: approx. 4.5 m
Plug connection: M 8 / 3-pin
Weight: 0.101 kg
Storage location: Rosenfeld
Storage bin: P2A2_BS2
Bhgmctod9y more
6
2006
ready for operation (used)
Item condition: Used from assembly line
Signs of wear: slight signs of wear
Scope of delivery: with cable set and nut
Case: slight scratches, the paint is damaged
Cfq23vej
Guarantee in months: 12
voltage: 24 V
Feather key: 3 x 15 mm
Torque: 18 Ncm
Speed (max): 6200 rpm
Weight: 0.72 kg
Storage location: Rosenfeld
Storage bin: P2A2_BS2 more
9
2006
good (used)
Item condition: Used from assembly line
Traces of use: Minor traces of use (keyboard)
Function: Works before disassembly
Bg8zvvcdcm
Case: Bearing marks and scratches, the paint is damaged
Guarantee in months: 12
Weight: 10.13 kg
Storage location: Rosenfeld
Storage place: 16C more
1
unexamined (used)
NEW SP2-P-DC5V AR1329 15A1/2HP125.250VAC 10A30VDC PANASONIC no warranty
Bferkyrx0w more
6
2011
new
6
new
7
Delivery includes mechanics, as shown in the photos.condition: New from stockUse marks: NoneScope of supply: With operating instructions and test reportHousing: Very good, no scratchesGuarantee in months: 12Hub: 200 mmVoltage: Umax 600 V AC protection class (IP): 65Temperature: 155°CRpm (max): 7500 min-1Weight: 18.64 kgStorage location: RosenfeldStorage location: 17A
Cl8grtnk more
1
new
6
new
6
2017
new
Item status New from inventory
Housing Very good, no scratches
Packaging Originally packed
Warranty in months 12
Primary voltage 24 V DC
Current 5 - 100 mA
Nm2jv
Protection Class (IP) 50
Diameter DN 16
Weight 0.4 kg
Storage town Rosenfeld more
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Assembly systems
Dealer for Assembly systems
