Condition: good (used), Year of construction: 1972, functionality: fully functional, Drawing slide force: approx. 800 Mp Credpfx Aie Ah Squoiji Blank holder force (die cushion): 320 Mp Drawing slide stroke: 900 mm Blank holder stroke (die cushion): 400 mm Maximum distance between table and slide: 1920 mm Table size: 3200 x 2000 mm Clear opening on the loading side: 3250 mm Table height above floor level: 400 mm Overall height above floor level: 6300 mm Drive power: 100 hp Machine weight: 153 tons

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1,200 mm Table size: 2.600 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum daylight (clamping surface to slide): 1.350 mm Credpfx Ae Ah Sk Ijiiei Minimum shut height: 250 mm Stroke speeds: Rapid traverse (downward): 140 mm/sec Rapid traverse (upward): 140 mm/sec Working speed: 16–50 mm/sec Operating pressure: 300 bar Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 1,500 mm, overall weight: 1,145 kg, No minimum price – guaranteed sale to the highest bidder! The press is in new condition and has not yet been used! TECHNICAL DETAILS Press force: 100 t Cedj Af Hd Uopfx Aiieri Stroke: max. 380 mm Table width: 1,500 mm Height adjustment: 1,000 mm Ram speed: 10 mm/s Column spacing: 1,500 mm MACHINE DETAILS Press type: Single-acting Drive system: Conventional Dimensions & Weight Dimensions (L x W x H): 1,800 x 800 x 2,100 mm Net weight: 1,145 kg Number of transport packages: 1 EQUIPMENT CE marking CE certificate Documentation

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: fully functional, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18T). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm, to accommodate different tools and material profiles. Additionally, a Siemens-manufactured Bruderer U control system is installed. The machine is partially functional: The buttons responsible for the two-hand operation respond with some delay in setup mode when threading the material. The machine's spring dampers are worn, causing the machine to vibrate during continuous operation, which does not affect production. The rubber mounts for the slides are brittle and are breaking off. Crsdsz H H Dqjpfx Aiiei The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18T) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 kVA Power supply: 400V / 50Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine will be dismantled in week 46. Removal is planned before the end of December, as a crane will already be on-site by then to load the machine.

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, press force: max. 630 to. daylight: 320 mm width: 420 mm stroke: max. 310 mm weight: 3.700 Kg. Csdjyylhaopfx Aiiori

Condition: repair required (used), machine/vehicle number: 8511147, functionality: limited functionality, operating hours: 26,172 h, input voltage: 380 V, type of input current: AC, pressing force: 35 t, stroke length: 90 mm, table width: 440 mm, table length: 640 mm, ram plate width: 210 mm, ram plate length: 310 mm, Cerini Presse TV 35 in need of repair. The clutch is working, but the brake pads need to be replaced, and the electrical cabinet needs to be reattached. The year of manufacture is unfortunately unknown, but likely around 1990. Cedpfs Ahhx Rsx Aiiori

Condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Profi Press: Portal presses, straightening presses, and other custom-made hydraulic presses for large and specialized projects. *Do you have a large workpiece or a specific pressing application? We build the press to meet your requirements.* RHTC supplies custom-made hydraulic portal presses/straightening presses for processing large and heavy workpieces. From an extra-long work table (recently delivered a 200-ton model with a 5000 x 4500 mm table size) to multiple portals and cylinders: we discuss your application and, together with you, develop a suitable design. *Custom-made solutions for your product and process.* Depending on the application, we can customize, among other things: - Press force and table dimensions - Working width, free working height, and cylinder stroke - Number of portals and cylinders - Manual or motorized movement of portal and cylinder Codpo Ah El Sofx Aiieri - Hydraulics, electrical design, and controls - Software for setting and storing various parameters In this way, we tailor the machine to the dimensions of your product, the required process, and the way you want to work. *From a special portal press to a larger industrial project* Our realized projects include portal presses with long and wide work tables, designs with two portals and two cylinders, and presses for pressing large shafts out of gearboxes. Even with extensive custom-made projects, the design starts with your application. We discuss the requirements, develop the design, and submit the technical drawings for your approval before production begins. *Customization across our entire machine range* Our capabilities extend beyond portal presses. You can also request custom-made solutions for other types of hydraulic presses, from small to large, from our range. We assess each project to determine which modifications are technically feasible and appropriate. This includes hydraulic workshop presses with a wider working width (including a sliding cylinder), C-frame presses for performing tests in a laboratory, production presses for compacting powder, arch presses for shipbuilding, and four-column presses for very precise pressing operations. *Discuss your project with RHTC* Send us your application, workpiece dimensions, and desired press force via the contact request in this advertisement, if known. If possible, include a drawing or photo. This will allow us to assess your request and discuss a suitable design and quote. You can also submit your request via the contact form on the RHTC website. The photos show examples of realized custom-made solutions. The design and specifications offered are determined per project.

Condition: used, Year of construction: 1998, machine/vehicle number: 845, functionality: fully functional, pressing force: 106 t, stroke length: 1,000 mm, table width: 1,200 mm, table length: 1,700 mm, table height: 650 mm, total length: 1,965 mm, total width: 2,645 mm, total height: 3,992 mm, overall weight: 12,500 kg, Equipment: documentation/manual, Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm For sale is a hydraulic 4-column stamping press from the manufacturer ALN with a maximum pressing force of 106 T. The machine has a table size of 1,700 × 1,200 mm, an open height of 1,450 mm, and a stroke of 1,000 mm, making it suitable for stamping, forming, straightening, inserting, and assembly work in industrial applications. ##### Technical data + information: Hydraulic 4-column stamping press – 106 T – 1,700 × 1,200 mm ==== General information - Reference ID: TPT-09 - Manufacturer: ALN - Type: Hydraulic 4-column stamping press Credps Ad H S Ajfx Aiiei - Model: 4 SPY 60 SO - Machine number: 845 - Year of construction: 1998 - Pressing force: 106 T - Table size (usable area): 1,700 × 1,200 mm - Table height: 650 mm - Open height: 1,450 mm - Stroke: 1,000 mm - Overall height: 3,992 mm - Overall width: 2,645 mm - Overall depth: 1,965 mm - Total weight: 12.5 T - Basement required: no ==== Hydraulic cylinder - Max. working pressure: 243 bar - Return speed downwards: 250 mm/s - Return speed upwards: 280 mm/s - Initial pressing speed: 17.5 mm/s ==== Hydraulics & drive - Main motor: 25 kW - Oil tank: 650 l ==== Safety and equipment - Slug damping: yes - Maintenance platform: no ==== Documentation - Hydraulic diagram - Electrical diagram - Operating manual ##### Application areas: Stamping, forming, straightening, inserting, assembly work, toolmaking, mold making, metalworking, mechanical engineering, contract manufacturing, series production (Hydraulic 4-column stamping press, 4-column stamping press, hydraulic press, ALN press, 4 SPY 60 SO, 106 T press, 106-ton press, forming press, stamping press, straightening press, inserting press, assembly press, industrial press) Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety guideline NR 12, which is based on these. Our great strength lies in the design and manufacture of custom machines and press automation. We distribute tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of the presses, we mainly use components from leading European manufacturers.

Condition: ready for operation (used), Year of construction: 2021, controller manufacturer: SIEMENS, Hydraulic dross press manufactured in 2021. This ALTEK TARDIS Gen II Model 100 features a maximum working pressure of 160 bar and a furnace sill height of 1,200 mm. It includes 10 ALTEK 181S Type Rhino Cast Steel Dross Pans with a volume of 0.12 m³ each, along with fume dust filtration and Siemens control. If you are looking to get high-quality dross press capabilities, consider the ALTEK TARDIS Gen II Model 100 machine we have for sale. Contact us for further details. • Machine: Dross press • Max. working pressure: 160 bar Cjdpfx Ais Ah D Iyjijri • Furnace sill height: 1.200 m • Door width: 2.000 m Additional equipment • 10 pcs ALTEK 181S Type Rhino cast steel dross pans, volume 0.12 m³ (approx. 181 kg) • Fume dust filtration Technical Specification Stamping Force 1000 Kn

Condition: good (used), Year of construction: 2005, machine/vehicle number: 1151, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 125 mm, total length: 2,050 mm, total width: 1,440 mm, total height: 3,220 mm, overall weight: 8,000 kg, Single-column (C-frame) eccentric press Gorenje Indop 100 t, manufactured in 2005 and CE-marked, for sale. The press is currently in production use, fully functional, and can be inspected while running. Technical data (as per nameplate): Nominal force: 1,000 kN (100 t) Stroke: 20–125 mm, adjustable Ram adjustment: 80 mm Distance table–ram (ram at BDC): 310–390 mm at 125 mm stroke, 362–442 mm at 20 mm stroke Year of manufacture: 2005 CE marking Serial no.: 1151 Equipment: Adjustable stroke via eccentric bushing Motorized ram adjustment with position indicator Hydraulic unit (overload protection) Movable two-hand control console with emergency stop Flywheel drive T-slot table Separate electrical cabinet Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 8,000 kg Dimensions (L x W x H): 2,050 x 1,440 x 3,220 mm Location: Slovenia Delivery terms: EXW Credpfo Af Nh Rex Aiisi Price: EUR 12,000 net Weight and dimensions are approximate values and must be verified by the buyer before transport.

Condition: used, Year of construction: 1985, machine/vehicle number: ARP-250, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, stroke length: 125 mm, total length: 2,500 mm, total width: 3,000 mm, total height: 4,500 mm, overall weight: 25,000 kg, Single-column (C-frame) eccentric press Ivo Lola Ribar ARP-250, 2,500 kN, for sale. The press has been completely overhauled, is regularly maintained, is in very good mechanical and functional condition, and is ready for immediate operation. Inspection under power is possible by appointment. Technical data (as per nameplate): Nominal force: 2,500 kN (250 t) Stroke: 40–190 mm, adjustable Ram adjustment: 125 mm Strokes per minute: 40 min⁻¹ Max. sheet thickness: 24 mm Distance table–ram (stroke down): 300–425 mm at 190 mm stroke, 375–500 mm at 40 mm stroke Year of manufacture: 1985 Equipment: Hydraulic die cushion Pneumatic clutch-brake T-slot table Central lubrication Air tank with service unit Separate electrical cabinet with control Dimensions and connection (approx.): Table size: approx. 1,380 x 880 mm Ram face: approx. 1,200 x 800 mm Table height above floor: approx. 800 mm Drive power: approx. 22 kW Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 24 t Dimensions (L x W x H): approx. 2.5 x 3.0 x 4.5 m Location: Slovenia Delivery terms: EXW Cedpfj Af Na Aox Aiieri Price: EUR 22,000 net

Condition: excellent (used), machine/vehicle number: 6835, power: 120 kW (163.15 HP), pressing force: 1,600 t, stroke length: 600 mm, table width: 1,250 mm, table length: 900 mm, distance table to ram: 1,600 mm, total length: 4,270 mm, total height: 7,760 mm, overall weight: 96,000 kg, Equipment: documentation/manual, 1600-ton screw press, Hasenclever FPRN 400 Crode Ah H Ugopfx Aiiei The press is complete and in very good condition. This machine was used to produce aircraft engine components at Rolls Royce. The press is complete and is offered with its electrical cabinet. Attached you will find photos of the press, as well as a technical data sheet. Price upon request.

Condition: used, Year of construction: 2001, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: HZPUI-T2300, feed length X-axis: 10,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 30,000 mm, ram adjustment: 10,000 mm, installation height: 54,000 mm, total width: 80,000 mm, total length: 90,000 mm, drop-through hole in table: 32,000 mm, input voltage: 380 V, overall weight: 5,400 kg, DGUV certified until: 08/2026, control voltage: 380 V, product height (max.): 5,000 mm, year of last overhaul: 2025, sheet thickness steel (max.): 2,000 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 3,000 mm, Equipment: 4th hydraulic function, SchulerUsed German Schuler hydraulic press, model HZPUI-T-2300/1700, manufactured in 2001. Nominal force 23000kN (2300 ton), bolster size 4600×2500 mm, total weight 540 ton, power 1600kW, HLP46 hydraulic oil. Heavy duty for automotive panel, deep drawing. Crsdpo Afapkefx Aiioi

Condition: ready for operation (used), Year of construction: 1964, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Clamping force: 68.6 kN Table Table dimensions: 600 × 600 mm Number of slots: 4 Electrical data Operating voltage: 380 V Connected load: 4 kW Power: 1 kW MACHINE DETAILS Manufacturer: Reis Type: 60A/7H Machine number: 48/64 Year of manufacture: 1964 Machine type: Embossing press Csdpfo Advcdox Aiisri Dimensions and weight Length: 1,500 mm Width: 1,300 mm Height: 3,000 mm Weight: 3,000 kg EQUIPMENT 4 slots in the table

Condition: good (used), Year of construction: 1991, We are selling our Hydrap 160-ton press. We urgently need the production space for a new product and are therefore reducing the already attractive price to "€5,000" for this valuable press (dismantling by the buyer). Operating hours: 20,242 Condition: good Inspection is possible and welcome. Location: Szügy / Hungary We will gladly answer any questions you may have and discuss the next steps. Csdpfx Aistu Szlsiori

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Press Machine type: Eccentric press Manufacturer: EBU Model: H50F Serial number: P5318482 Rated force: 500 kN Stroke adjustment: 8–120 mm Ram adjustment: 70 mm Stroke rate: 115 min⁻¹ Table Table dimensions: 650 × 520 mm Hole diameter: approx. 120 mm MACHINE DETAILS Drive Motor power: 3 kW Dimensions and weight Credpfxo Ad Ifde Aiisi Length: 1,500 mm Width: 800 mm Height: 2,400 mm Weight: 3,000 kg EQUIPMENT Guards for the flywheel are available.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Punching machine Speed: 30–400 rpm Drive power: 18 kW Ram adjustment: 0–50 mm Csdpfx Aij Adzq Hoieri Table dimensions: approx. 740 mm (?) Feeder Feed length: 160 mm Material width: 160 mm Material thickness: 3 mm Strip speed: 35 m/min MACHINE DETAILS Manufacturer: Haulick + Roos Type: 720 NS Machine number: 1.204.027 Operating voltage: 380 V Rated current: 80 A Dimensions (L × W × H): 3,500 × 2,000 × 3,000 mm Weight: 5,000 kg EQUIPMENT Haulick + Roos feeder, type RS160SL2738

Condition: ready for operation (used), Year of construction: 1968, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Crsdpfx Aie Adu Uljiei Manufacturer: Exner Type: HA SP-340 SS Year of manufacture: 1968 Machine number: 1 PRESS DATA Press force: approx. 34 t Table dimensions: 1,000 × 800 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 2,000 mm Width: 2,000 mm Height: 3,200 mm Weight: 8,000 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Pressing force: 30 t Table dimensions Credpfx Aj Adunrsiiji Length: 480 mm Width: 400 mm MACHINE DETAILS Manufacturer: Bruderer Type: BSTA 30 Machine type: Punching machine Condition: Refurbished Dimensions Length: 1,100 mm Width: 800 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Feed control

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, Kaiser Press 50 Cjdpfxoztfbwo Aiieri -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: Foot pedals and push buttons on the control panel -Pressing force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electric unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with foot: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (cross member): 245 mm -Cross member adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross member via hand crank (no manual lifting required) -Hydraulic unit can be moved sideways: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 pressure dies with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure indication via pressure gauge -2 prism supports included in delivery -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 290 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1975, pressing force: 250 t, Pressure: 250 t Throat: 400 mm Stroke: 30...140 mm Table size: 1000 x 750 mm Passage opening in table: 360 x 400 mm Ram area: 630 x 500 mm Credpfx Aij Ahxlqsiei Ram adjustment: 110 mm Total power requirement: 18 kW Machine weight approx.: 16 t

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 173, functionality: fully functional, pressing force: 1,000 t, stroke length: 170 mm, table width: 800 mm, table length: 800 mm, distance table to ram: 470 mm, total length: 2,950 mm, total width: 1,950 mm, total height: 4,090 mm, overall weight: 26,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The press is in perfect working order, has a CE marking, and is equipped with a recent electrical cabinet, as well as an upper and lower ejection system (see the attached technical data sheet and photos). Crodpfo Ahw Dmsx Aiisi Originally installed in Italy, it is now stored and available for inspection at our Peschadoires workshop in France. This machine is available for sale immediately. A technical file is available with the press. Price upon request.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Schaal Type: SEP32 Year of Manufacture: 1980 Machine Type: Punching Machine Press Data Press Force: 32 t Stroke: 8–70 mm Crodo Adu S Repfx Aiisi Flywheel Diameter: 660 mm Speed: 80–400 RPM MACHINE DETAILS Dimensions Length: 1,500 mm Width: 1,200 mm Height: 2,500 mm Weight Machine Weight: 3,000 kg

Condition: refurbished (used), Year of construction: 1983, functionality: fully functional, ram adjustment: 100 mm, pressing force: 150 t, Raster die-cutting machine Mechanically overhauled in 2022 Control system: Siemens S7, 2017 Feeder: Zehnder & Sommer Cjdpfj Ahyu Rox Aiiori Alternatively: Raster pneumatic roller feeder Number of strokes: 40 – 150 Ram stroke: 30 – 120

Condition: good (used), Year of construction: 2010, functionality: fully functional, overall weight: 55,000 kg, Punching and forming machine, manufacturer Raster Robust cast iron construction Lower part, side supports, and upper part braced with tie rods Credpfe Ahyr Djx Aiioi Hydraulic overload protection Press force monitoring Automatic stroke adjustment, 40 - 200 mm Automatic ram adjustment, 150 mm Speed: 30 - 150 strokes/min Control system: S7 Raster: Hydraulic roller feed, 450 mm width, material thickness up to 4 mm Chip conveyor Mounting elements, Gerb