Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram Hodoyupulopfx Ahvsni - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, gebraucht 070165C prompt, Zwischenverkauf v Deutschland 480 € 1 1.5 mm 100 mm 200 mm Hnsdpfsyui Urex Ahvsi 3 - 6 bar 560 mm 200 mm 200 mm 11 kg

Condition: used, nominal force 100 t stroke 320 mm no. of strokes 35 /min distance between columns 360 / 250 mm Distance table/ram, max. stroke up, adjustment up 500 mm table surface area 320 x 450 mm table height over floor 660 mm ram surface 250 x 280 mm spindle diameter 125 mm power capacity 3,0 kW weight 4,5 t Dimensions (WxDxH) 2,0 x 1,6 x 3,1 m only permitted for hot forming work Hsdpfx Ajvuk N Tehvsni high speed friction screw press with motor, friction screw drive as is where is, WITHOUT putting into operation

Condition: ready for operation (used), total height: 4,900 mm, total width: 5,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), empty load weight: 85,000 kg, load capacity: 400,000 kg, Portaalrichtpers 400 ton Model: GANTRY-400T Voor het gericht van assen, gietstalen producten, gewalste producten, smeedstukken met vrije matrijs, vlak staal maar ook voor het in- en uitpersen van lagers, bussen, krimpringen,... 14 individuele tegendrukcilinders in de tabel - 3 ton dop per cilinder - 100 mm slak per cilinder - Druk 300 kg/cm² - Doorgang tussen de staanders: 3990 mm Werksnelheid – bij max. druk: 2 mm/sec Terugloopsnelheid: 50 mm/sec Sluitsnelheid: 30 mm/sec Hedpsyt S Uxjfx Ahvjni Max ram adjustment: 1550 mm Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Max distance between table - ram: 1550 mm Dimensions of the table: 7000 x 3200 mm

Condition: ready for operation (used), total width: 2,600 mm, total length: 3,100 mm, passage width: 1,250 mm, empty load weight: 25,000 kg, Model: HZPUX 150/100-1250/1000 Capacity: 230T Max ram adjustment: 1100 mm Max distance between table - ram: 2250 mm Dimensions of the table: 1000 x 1250 mm dimensions stamp: 1000 x 770 mm Electric motor (power): 70 CV Courant needed: 380 V Hnedpsyt S U Eefx Ahvoi Height: 6200 + 1250 mm

Year of construction: 2021, condition: like new (used), Type: PX 30530 Serial number: 12932 Year of manufacture: 2021 Bending length: 3050 mm Hjdpfx Aoyhdrrehvsni Pressing force: 320 t Maximum pressure: 280 bar Motor power: 18.5 kW Oil tank capacity: 400 l Weight: 14,700 kg

Condition: excellent (used), Year of construction: 1997, Manufacturer: AMADA Europe S.A. Model: HFB 80 Year of manufacture: 1997 Hedpfxex H Sl Se Ahveni Serial number: HFB0 80 25 R970112 Pressing force: 800 kN Maximum stroke: 200 mm Power supply: 415 V / 50 Hz Number of phases: 3 Rated current: 171 A Machine weight: 5750 kg

Condition: used, Year of construction: 2004, total height: 2,620 mm, total width: 1,450 mm, total length: 2,650 mm, Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 180253 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 150 - Max. stroke [mm]: 340 - Table width [mm]: 1570 - Ram length [mm]: 280 - Ram width [mm]: 200 - Height adjustment [mm]: 800 - Pressing speed [mm/s]: 5 - Column spacing width [mm]: 1570 Hnjdpfsytghtox Ahvji - Transport dimensions: 2650mm x 1450mm x 2625mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2016, condition: good (used), 1.00 - GENERAL MACHINE DATA · Machine type: APC 1500 TON · Closing direction: Downstroke · Max. operating pressure (primary circuit): 220 BAR · Clamping force: 1500 TON · Weight: approx. 42,000 kg · Dimensions (W x D x H): 2500 mm x 2500 mm x 5500 mm 1.01 - HYDRAULICS & CYLINDERS · Number of clamping pistons: 1 · Clamping piston diameter: 930 mm · Clamping piston stroke: 700 mm · Number of rapid traverse/return cylinders: 2 (oil-hydraulic) · Force of rapid traverse cylinders: 20 TON (each) · Rapid traverse cylinder (bore): 120 x 50 mm · Guide columns: Steel C45, hard-chromed (0.15 mm), Ø 200 mm · Guide length: 600 mm 1.02 - DIE HANDLING TROLLEY (TRANSFER CART) · Transfer cart dimensions: 900 mm x 1900 mm · Transfer cart stroke: 1500 mm · Number of cart cylinders: 2 · Cart cylinder bore: Ø 70 x 40 mm (stroke 1400 mm) · Loading and unloading side: Front 1.03 - WORK AREA & TOOLING · Number of working levels: 2 · Number of usable spaces: 1 · Clear distance between levels: 800 mm · Ejector travel area: 650 mm x 600 mm · Minimum tool height: 100 mm 1.04 - ELECTRICAL DATA & CONTROL · Control system: Programmable Logic Controller (PLC) · Motor voltage: 380 V / 50 Hz · Control voltage: 24 V DC · Installed power (main motor): 37.5 kW · Frequency converter: Yes (for low-noise operation and energy savings) · Vertical travel measurement: Linear transducer · Cart travel measurement: Encoder with absolute zero point · Pressure monitoring: Electronic pressure transmitter 1.05 - SAFETY FEATURES · Fall protection: Progressively acting mechanical safety device (effective in any position) Hnodpsytc Shefx Ahvsi · Safety zones: Light curtains (Category 4) at loading and unloading sides · Side guards: Fixed frames with interlocked safety doors (safety switches) · Standards: Complies with CE guidelines 1.06 - CONSTRUCTION & MATERIALS · Frame: Electrically welded steel (ribbed) · Bearing bushes: Bronze bushings · Hydraulic components: CETOP standard (e.g. ATOS) · Pneumatic components: UNI-CETOP standard

Condition: good (used), Year of construction: 1980, In good technical condition. Year of manufacture: 1980 Hjdpfxeytb Dpj Ahvsni

Condition: good (used), Used hose crimping machine from Finn Power Lillbackan Konepaja Type: P 32 RAE Including various dies up to 52 mm diameter Hnjdpfxeytb D As Ahvji Capacity up to 78 mm (excluding dies)

Condition: new, Year of construction: 2019, machine/vehicle number: DF0319, pressing force: 125 t, pressure:125 t passage width:1000 mm stroke:500 mm Weight of machine approx.:6 t dimensions:2540 x 933 x 3000 mm return capacity:12 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:600 x 1300 mm table plate:600 x 1300 mm Hnjdpofxykpofx Ahvji table height over floor:850 mm Oil cooling (electric):1,5 kW (max) Engine Output:11 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Oil Tank Capacity:250 l speed rapid traverse:10 mm/sec column diameter:120 mm

Condition: as good as new (ex-display), Year of construction: 2018, pressing force: 110 t, pressure:110 t Hsdpfx Ajfhcc Tohvjni passage width:1500 mm stroke:650 mm total power requirement:15 kW weight of the machine ca.:11 t dimensions:ca. 2640 x 3200 x 3650 mm return capacity:11 t column diameter:120 mm Max Working height:1000 mm Table dimensions:1990 x 1000 mm Ram size:1990 x 1000 mm Drivering away pestle:650 mm table height over floor:800 mm pre-running speed:10 mm/sec Pressure Speed:10 mm/sec Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max)

Condition: new, Year of construction: 2019, machine/vehicle number: DF0325, pressing force: 40 t, pressure:40 t passage width:1000 mm stroke:400 mm Weight of machine approx.:3,5 t dimensions:2065 x 700 x 2905 mm return capacity:4 t Max Working height:700 mm Return Speed:25 mm/sec pestle plate:1320 x 600 mm table plate:1320 x 600 mm table height over floor:750 mm Oil cooling (electric):1,5 kW (max) Engine Output:8 kW speed of forward flow:10 mm/sec Hjdpfx Aofxykwshvsni pressure speed:10 mm/sec Oil Tank Capacity:200 l speed rapid traverse:10 mm/sec column diameter:100 mm :2400 ? Maintenance Balcony:3600 ? :4600 ? Ground tub of lacquered steel:850

Condition: new, Year of construction: 2018, machine/vehicle number: DF0199 - Rev.00, pressing force: 160 t, pressure:160 t passage width:1200 mm stroke:600 mm Weight of machine approx.:7 t dimensions:ca. 2400 x 1400 x 3400 mm return capacity:16 t Max Working height:800 mm Hjdpfx Asdxvfhshvsni Return Speed:25 mm/sec pestle plate:1670 x 800 mm table plate:1670 x 800 mm table height over floor:800 mm Oil cooling (electric):1,5 kW (max) Engine Output:18 kW speed of forward flow:10 mm/sec pressure speed:10 mm/sec Travel:600 mm Oil Tank Capacity:300 l

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex location: Hnedpfx Asyuwdhshvsi Hydraulic double-column straightening press Dunkes Type HDSR 75 Year of manufacture: 1977 Pressing force: 165 t 3 cylinders, pressing force per cylinder: 75 / 65 / 25 t Table: 1500 x 500 mm Stroke: 350 mm Drive power: 3 / 15 kW Weight: 6 t Price: EUR 2,750— plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1992, Available immediately from location: Hnedpsyuwdbsfx Ahvsi Edelhoff Hydraulic Single Column Press Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressure capacity 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive 7.5 kW Weight 6 tons Price: €5,000 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1971, Immediately available from CH toolmaking plant: Eitel Hydraulic Straightening Press Hsdsyuwcwjpfx Ahveni Type RRP 25 Year of manufacture: 1971 Pressing force: 25 tons Complete straightening equipment and accessories 2 extension tables right/left, each 3000 mm Hydraulic fine adjustment system Weight: 2,500 kg Price: EUR 2,000 plus VAT ex works

Condition: new, Year of construction: 2026, pressing force: 200 t, DHS-200 – 200 T Hydraulic Heated Press – Sliding Table – Heating Plates 800 × 800 mm For sale is a DHS-200 hydraulic heated press with a pressing force of 200 T and an extendable sliding table system. The machine features heating plates measuring 800 × 800 mm, an open height of 800 mm, as well as a hydraulic stroke of 600 mm, making it particularly suitable for laminating, molding, and thermal press processes with temperature-controlled tooling. ==== Technical Details & Information: Hydraulic Heated Press DHS-200 – 200 T ==== General Specifications - Design: Hydraulic heated press with sliding table - Pressing force: 200 T - Table usable area: 800 × 800 mm - Heating plates: 800 × 800 × 95 mm - Open width: 900 mm - Open height: 800 mm - Extendable table: 800 mm - Table height: 900 mm - Overall dimensions (W×D×H): 2,150 × 2,050 × 2,850 mm - Total weight: approx. 9,800 kg - Machine frame: welded steel construction ==== Hydraulic Cylinder - Piston stroke: 600 mm - Piston rod Ø: 380 mm - Cylinder Ø: 180 mm - Max. operating pressure: 260 bar ==== Hydraulic Power Unit - Return speed: 22 mm/s - Idle speed: 10 mm/s - Hydraulic pump: ASC - Pump capacity: 42 l - Motor power: 7.5 kW - Hydraulic power unit: mounted beside the press - Hydraulic manifold / valves: Duplomatic - Air cooling - Adjustable pressure - Manual limit sensors - Cam switch for stroke limitation - Passive pressure maintenance for up to 60 minutes ==== Heating System - Electrically heated steel plates Hsdpfx Ahsyuvrdsveni - Heating capacity: 27 kW - Temperature range up to 250 °C - Temperature sensors: 2 per heating plate - Temperature fluctuation: approx. 5–10 °C ==== Controls - Two-hand operation - Ram return via control button - Stroke limitation via cam switch - Pressure adjustment via control valve - CE certificate and user manual included ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Heating elements per plate: 18 units - Total heating power: 27 kW - Hydraulic motor connection: 7.5 kW - Total connected load: approx. 40 kW ===== Plastics processing, laminating processes, composite materials, rubber and elastomer processing, compression molding, thermal pressing processes, hot-pressing applications Hydraulic press, hydraulic heated press, heated press, sliding table press, 200 ton press, 200 T press, laminating press, plastics press, molding press, vulcanizing press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured in compliance with German machine directives, the European Machinery Directive (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they also fully comply with the national Brazilian safety standard NR 12, which builds upon these. Our core competence is special-purpose machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics of our presses, we mainly use components from leading European manufacturers.

Year of construction: 2000, condition: good (used), Used Amada Tp150ex 150ton press / stamping machine Amada TP150 EX electric Power Press with feed Atkin Bhp feed and Atkin BHP decoiler New/year 2000 TP150 Model Amada TP-150EX Weight 16 tons Accessories Sick Guards Hydraulic Overload Variable Speed Drive Hydraulic Tool Clamping Capacity 15o tons Supplied New July 2000 Stroke 175mm Bed Area 1250 x 750 x 160mm Ram Area 700 x 550mm Hsdpfx Ahjn Smg Teveni Ram Adjustment 100mm (motorised) Die Height 390mm Ideal for automotive or aerospace sheet metal press work New c and h frame presses also available.

Condition: new, Sheet metal cutting moulds Hnodpfxofuango Ahvoi Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: good (used), Year of construction: 1994, functionality: fully functional, total length: 2,700 mm, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, Used 1000ton hydraulic press for sale 1000TON PRESS SIDE FRAME Max TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm BOLSTER AREA 2700mm x 1500mm PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton Hsdpfoucdgpsx Ahveni DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 65/2/158/02, throat depth: 280 mm, table length: 580 mm, total width: 820 mm, pressing force: 65 t, stroke length: 120 mm, punching force: 65 t, Used 65ton mechanical power press for sale Video at the bottom of this listing MODEL 65 CNR 4 SERIAL N° 65/2/158/02 NOMINAL FORCE (Max stroke) 650 [ KN] MACHINE WEIGHT 5000 [ daN] NOMINAL SPEED 73 [ C/min ] VARIABLE SPEED MIN/MAX [ C/min ] MAXIMUM CLUTCH ENGAGEMENTS 36 [ C/min ] CLUTCH PRESSURE MIN/MAX 4 / 5,5 [ bar) MAXIMUM STOPPING TIME 0,154 SAFETY DISTANCE 246 [ mm ] FLYWHEEL ENERGY 3440 [ KJ] STROKE LENGTH MIN/MAX 10 / 120 [ mm ] RAM ADJUSTMENT 100 [ mm ] SHUT HEIGHT S.D.A.U. 320 [ mm ] MAXIMUM EJECTOR STROKE 40 [ mm] TABLE SIZE 68 / 580 / 820 [ mm ] RAM SIZE 340/ 470 [mm] TOOL SPIGOT DIA 45 [ mm ] Hodpfxexqn Une Ahveni THROAT DEPTH 280 [ mm ] MAX TOOL SIZE 340 / 470 [ mm ] MAX TOP TOOL WEIGHT 136 [ daN]

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Return speed 80-90mm/s Hnjdjf A R Uhepfx Ahvsi Can quote for new hydraulic presses c and h frame

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Hjdpfx Ahehcnxrevsni Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 New hydraulic presses for sale