Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe Gjdpfx Ajzru Hasnmsbr * Machine documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm Gedpfxezruwls Anmobr tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: good (used), Year of construction: 1989, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine comes from a training center. Gsdpfxozrt Rkj Anmjbr Equipment: 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Condition: good (used), Year of construction: 1989, functionality: fully functional, Controller Heidenhain TNC355 Table size 925 x 380 mm Godpey Hu Szefx Anmobr Max. table load 420 kgs X-axis 760 mm Y-axis 410 mm Z-axis 450 mm Spindle taper ISO40 Spindle power 5.5 kW Tool magazine 20-position Max. spindle speed 6000 rpm Power requirement 18 kVA / 380 V / 32 A Weight 3300 kg Dimensions (L x W x H) 3200 x 2600 x 2500 mm Accessories, equipment - Coolant system - Machine mounths

Year of construction: 2004, condition: ready for operation (used), X-axis: 660mm, y-axis: 350mm, z-axis: 450mm, table clamping surface dimensions: 762x356mm, speed: 10-10,000/min, tool holder: SK 40 DIN 69871, number of tool changer stations: 20, rapid traverse: 28m/min, control: ULTIMAX 4, length: 2000mm, width: 1800mm, height: 2660mm, weight: 2.9t, with documentation, documents, hydraulic diagram and electrical circuit diagram. An on-site inspection is possible. Gbjdpfsztzq Uex Anmer

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: B-0312, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 920 mm, total length: 10,000 mm, table length: 3,200 mm, table width: 2,050 mm, total width: 6,400 mm, spindle speed (max.): 8,000 rpm, total height: 4,700 mm, distance between stands: 2,700 mm, type of input current: three-phase, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, overall weight: 36,000 kg, spindle mount: MK 5, spindle motor power: 21,000 W, CNC Gantry Machining Center VISION WIDE VTEC VF-3026 We offer for sale an advanced, heavy-duty, large-format Vision Wide VTEC VF-3026 gantry machining center. The machine was manufactured on September 15, 2008. It is designed for precise and high-performance machining of large molds, dies, and heavy steel and cast iron components. Featuring a renowned Heidenhain iTNC 530 control system and extensive, progressively added equipment (two factory-installed heads, a probe, and CTS), the machine provides significant production capabilities, excellent rigidity, and machining dynamics. Gsdpfxjztzl Ss Anmsbr GEOMETRIC PARAMETERS AND WORKING AREA: Table dimensions: 3200 x 2050 mm Travel in the X-axis: 3200 mm Travel in the Y-axis: 2600 mm Travel in the Z-axis: 920 mm Maximum table load: 11,000 kg (11 tons) Clearance between columns: 2700 mm Distance from the spindle face to the table: 150 - 1070 mm SPINDLE AND DRIVE SYSTEM: CNC Control: HEIDENHAIN iTNC 530 Series Spindle motor power (Heidenhain): 18 / 21 kW (high torque) Spindle taper: ISO 50 / BT-50 (compatible with P50T-1 pull studs) Maximum spindle speed: 8,000 rpm Minimum spindle speed: 50 rpm RICH PREMIUM EQUIPMENT (INCLUDED IN THE MACHINE PRICE): Manual 90-degree angular head (Year of manufacture: 11/2011) - modern accessory designed for efficient side machining. The maximum speed of the head is 3000 rpm. Wireless workpiece measuring probe - a radio measuring system integrated with the angular head, enabling automatic referencing and dimensional control directly on the machine table. Straight extension head / Spindle extender (Model: VF-3026AC, Year of manufacture: 09/2008) - a factory-installed extension unit with a hydraulic system, operating at a maximum speed of 1000 rpm. Through-spindle coolant system (CTS) - a high-pressure coolant supply system that delivers coolant directly through the tool. AUTOMATIC TOOL CHANGER (ATC): Magazine capacity: 40 positions Tool holder type: BT-50 / CAT-50 Maximum tool weight: 18 kg Maximum tool length: 450 mm Maximum tool diameter: 125 mm diameter (215 mm diameter with adjacent slots free) STANDARD EQUIPMENT: Spindle cooling unit Dual chip removal system: screw conveyors and belt conveyor Remote manual pulse generator for the operator Full splash guard and work lighting Automatic lubrication system and Auto Power Off function Air blast through spindle Heat exchanger in the control cabinet Matching transformer Complete technical documentation and electrical diagrams DIMENSIONS AND POWER SUPPLY: Power consumption: 60 kVA (Three-phase AC power supply) Machine weight (net): 36,400 kg (36.4 tons) Overall footprint (Max Floor Space): approx. 10,000 x 6,400 x 4,700 mm

Year of construction: 1998, condition: ready for operation (used), Available immediately, ex works: Console milling machine REFORM Type UF 32 Year of manufacture 1998 Table 1400 x 300 mm Travel distances X/Y/Z 1100/300/520 mm SK 50 Gjdpfoztxu Dsx Anmobr Spindle speeds 31.5 – 1400 rpm Drive power 7.5 kW Digital display Hydraulic vice Weight 2.7 tons Many tools, milling cutters Price: Euro 3,000.00 plus VAT, ex works

Condition: used, Emco F3 universal milling machine from a vocational training workshop Godpjztwgfjfx Anmsbr With axis digital readouts Includes accessories as shown in the picture X: 350 mm Y: 300 mm Z: 200 mm Table: 600 x 200 mm Rapid traverse rate X, Y axis: 1200 mm/min Spindle speeds: 80 – 2200 (8) rpm Quill travel: 45 mm #8498 Net price

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display, Heidenhain active control, and continuously variable feed. Technical data: >> Year of manufacture: 1982, Machine no. 2101-1995 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 2 axes >> Rapid traverse in 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable by 100mm on the spindle head >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Operating manual, parts list Gbodpfjzrn Tysx Anmjr About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs smoothly. The FP1 was in a training workshop at a university and was used very little. This newer FP1 model has continuously variable feed in two axes, and the machine also has rapid traverse in these axes. A major advantage is the active 2-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: used, Model: SH75 Serial No: 7076 Capacities: Rotary Table Size: 1000 x 1000mm Maximum Table Load: 2000kg Vertical Traverse: 1000mm Cross Traverse: 1245mm Longitudinal Traverse: 1000mm Spindle Diameter: 75mm Spindle Traverse: 508mm Spindle Speeds: 5.6- 1120 rpm Spindle Taper: 40 int Gbjdpfxezrm T Ee Anmer Facing Head Diameter: 508mm Facing Slide Traverse: 180mm Facing Head Speeds: 5.6 – 280rpm Feeds, X, Y & Z: 0.75 – 2500mm/min Feeds, Spindle & Face: 0.25 – 830mm Screw Cutting to Table: 2 – 10mm Pitch, 4 – 16 TPI Motor: 7.5kw Electrics: 415v, 3ph, 50 Cycles Complete with: Screw Cutting, 3 Axis DRO, Steel Telescopic Guards, Operator Safety Guard, Pendent Control, Power Draw Bar, Safety Brake, Facing Head Lock, Spindle Support Bearing, Facing Slide Tool Holder Selection of Spindle Tool Holders, Lovo Light Approximate Dimensions: 4200 x 2940 x 2950mm Approximate Weight: 10,500kg

Condition: used, Webster & Bennett 72” V Series Elevating Rail Gedpezrm Sbofx Anmebr Table Size 72” Machine swing 84” Table speed Range 3.8 to 83 rpm. Feed range .005” to 0.250” per rev. Max Height under cross slide 48” Max Height under turret 48” Ram Travel 38” 4 Std jaws Main motor 40hp Newall 2 Axis Digital Read Out

Condition: good (used), Year of construction: 1974, functionality: fully functional, * 3-axis digital readout (Heidenhain) * Adjustable vertical milling head with quill adjustment * Additional horizontal spindle * REPAR 2 safety device * Machine light * Anti-vibration mounts x-travel 500 mm y-travel 300 mm z-travel 380 mm table surface area 800 x 420 mm table load capacity 400 kg tool taper ISO 40 spindle turning speed range 40 - 2000 rpm feeds longditudinal/cross/vertical 10 - 500 mm/min rapid traverse 1500 mm/min main drive 3 kW weight of the machine approx. 1,3 t Transport dimensions: Gbjdpfozrm Snjx Anmjr The machine is loaded onto a heavy-duty pallet; Dimensions: 1800 x 1100 x 2100 mm (length x width x height)

Condition: used, MODEL: SF100 SERIAL No: 6889 Capacities: Spindle Dia: 100mm Spindle Speeds: 22 – 1120rpm Spindle Taper: 50 Int Spindle Traverse: 750mm Heavy Duty Milling Quill Dia: 225mm Facing Head Diameter: 810mm Facing Slide Traverse: 190mm Facing Head Speeds: 2.2 – 224rpm Rotary Table Size: 1200 x 1200mm Longitudinal Traverse: 1350mm Cross Traverse: 1200mm Vertical Traverse: 1186mm Feed Rates: (3 Ranges): 1.3 – 3820mm/min Spindle Motor: 18.5kw Electrics: 415v, 3ph, 50 Cycles Complete with: Newall DP700 3 Axis DRO Steel Telescopic Guards to Long & Cross Traverse Facing Slide Tool Holder Gedpfszrm Rwex Anmebr Manual Rotary Table

Condition: good (used), Year of construction: 1989, Parts shown by hand not come. Gedpfezrm Nysx Anmsbr

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: NX1102193, SPECIFICATION Table size 1244 x 230mm Longitudinal traverse 700mm Cross traverse 300mm Vertical traverse 405mm Gbedpsy S Shwsfx Anmer Quill travel 125mm Quill feeds 0.045-0.086mm/rev Quill diameter 86mm Quill taper R8 Spindle motor 2.2kW Spindle speeds (inf. Variable) 50-3500rpm Weight 1200Kg Machine in Metric execution MACHINE EQUIPPED WITH Sino 3 axis DRO system Longitudinal power feed One shot centralised lubrication system Low voltage halogen worklight Spindle guard Coolant system

Condition: used, TECHNICAL DETAILS CAPABILITIES - Movement on X-Y : 400 x 250 [mm] - Vertical slide stroke : 400 [mm] - Drilling spindle stroke : 130 [mm] - Clearance between spindle nose and table : 570 [mm] - Clearance between mount and spindle center : 320 [mm] TABLE - Useful surface : 595 x 320 [mm] - Movement X-X : automatic with ball screws - Drilling head - Internal taper : Morse 2 - Spindle speed : 60-3000 [rpm] - Spindle feed : 0.03-0.06 [mm/r] - Voltage : 3 x 380 V / 50 Hz - Installed power : 2.1 kW - Machine net weight : 1100 [kg] Gbjdpfxsuhbprj Anmer - Dimensions : 2050 x 1600 x 1900 [mm] EQUIPMENT - Digital display : X-Y - Circular table : Ø 300 - Machine lamp

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 3100/800 [mm] - Maximum weight upon table : 7000 [kg] - Travels on X/Y/Z axes : 3000/1000/1200 [mm] - Rapid traverses rates (X/Y/Z) : 15000/15000/15000 [mm/min] MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 4000 [rpm] * Spindle power : 27 [kW] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 24 WEIGHT & DIMENSIONS - Machine floor space : 7913/5043 [mm] - Machine height : 3440 [mm] - Machine weight : 13410 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 38 [kW] MACHINE HOURS - Number of hours under power : 24689 [h] - Number of working hours : 23809 [h] Gbjdpfxjw Tnhbj Anmer - Number of spindle hours : 7658 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel Interface : RS232/RJ45/USB - Interactive programming - Coolant tank - Tool-holders

Condition: used, TECHNICAL DETAILS - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg]. EQUIPMENT - with part loader Godpfxouhbpls Anmjbr

Condition: used, TECHNICAL DETAILS Gjdpovt Eifjfx Anmobr - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 6.7 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30 [m/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB - Electronic handwheel - Type of divisor : 4e axe CNC intégré * Coolant tank * with high-pressure pump - Coolant through spindle - Electric transformer

Condition: used, TECHNICAL DETAILS TABLE - Table dimensions : 2700/850 [mm] - Maximum weight upon table : 6000 [kg] - Travels on X/Y/Z axes : 2500/1000/1100 [mm] - Rapid traverses rates (X/Y/Z) : 15 [mm/min] MILLING HEAD Manual head MILLING SPINDLE - Tool holder type : ISO50 * Spindle speeds : 3000 [rpm] * Spindle power : 25 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 24 WEIGHT & DIMENSIONS - Machine floor space : 6820/3800 [mm] - Machine height : 2870 [mm] - Machine weight : 12500 [kg] POWER SUPPLY - Supply voltage : 400 [V] Godpfx Asznd D Tonmobr - Total installed power : 38 [kW] MACHINE HOURS - Number of hours under power : 23201 [h] - Number of working hours : 7902 [h] - Number of spindle hours : 7638 [h] EQUIPMENT - CNC : Heidenhain iTNC530 Interface : RS232/RJ45/USB - Interactive programming - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chips conveyor

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] EQUIPMENT Gbedpfxeuhbxae Anmer - 3 axis display HENDENHAIN - steel sheet retention

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] Gbedpfjup Hw Eex Anmor TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: used, TECHNICAL DETAILS - Strokes : 320 x 150 x 375 [mm] - Distance between vertical spindle-table surface : 310 [mm] - Distance between horizontal spindle-table surface : 410 [mm] - Spindle speeds (continuous adjustment) : 58-2000 [Rpm] - Spindle taper : 30 ISO - Feeds : 12-400 [mm/min] - Fast feed up : 1200 [mm/min] - Supply : 3 x 380 [V/50 Hz] - Motor power : 1.5 [kW] - Total installed power : 2.1 [kW] - Machine floor space : 1500 x 1100 x 1600 [mm] - Machine weight : approx. 700 [kg] Gjdpjuhbw Nefx Anmsbr EQUIPMENT - Revolving vice - Irrigation system

Condition: good (used), machine/vehicle number: 630, with a swiveling (pivoting) vertical head Table size: 300 x 1,430 mm Table travels: longitudinal (X-axis) 1,000 mm vertical (Z-axis) 520 mm transverse (Y-axis) 360 mm Installation height under the milling spindle approx. 500 mm Gbodpobq Rugsfx Anmor Overhang of the milling spindle min./max. 350 mm Spindle mount: SK 40 Spindle speeds: 25 - 1,200 rpm Feed rate/rapid traverse: 12-900 mm/min Spindle drive: approx. 3 kW Total drive: 3.4 kW - 380 V - 50 Hz Weight: 2,400 kg

Condition: ready for operation (used), DECKEL CNC MILLING MACHINE WITH CONTOUR 2 CONTROL TYPE: FP 4 MA MACHINE NO.: 2204 - 1679 YEAR OF MANUFACTURE: 1988 Working area: X-axis (longitudinal) automatic/manual 485 / 500 mm Y-axis (transverse) automatic/manual 385 / 400 mm Z-axis (vertical) automatic/manual 380 / 400 mm Equipment: Gbsdpfx Aozrmkdenmsr - Standard accessories - Swivel table 460 x 800 mm - Vertical milling head, adjustable, SK40/M16 - Hydraulic vise - Automatic tool changer - Automatic central lubrication - Electronic handwheel - Machine light - Chip tray - Protective cabin - Coolant system - Various tool holders - Documentation Condition: operational, can be demonstrated under power.