1 branded groove milling machine make: HURTH , type:LFV 1 table size 875 mm x 270 mm, speed 180 - 2800 rpm in 9 steps, stroke max.180 mm depth adjustment max 100 mm, collet chuck holder with collet chuck set operating key, operating instructions.
Dimensions: , width 1150 mm, depth 1300 mm, height 1750 mm.
Weight: approx. 1100Kg
The machine is visually and technically in good condition and functions perfectly. Gladly you can visit the machine in our warehouse under power and test to convince them...
x-travel: 400 mm
y-travel: 100 mm
z-travel: 100 mm
electrics - voltage/frequency: 380/50 V/Hz
total power requirement: 0,8 kW
machine weight approx.: 80 kg
space requirements of the machine approx.: 1,6 x 0,6 x 1,4 m
This milling machine is ideally suited for window.
- long hole milling machine for aluminium
- pneumatic tool clamping
- feeder: hand lever operation
- safety device: 2,2 V
groove width:16 mm
spindle taper ISO:40
spindle motor:3 kW
spindle turning speed range:300 - 3600 U/min
quill stroke:150 mm
diameter of quill:100 mm
table surface area:1800 x 250 mm
total power requirement:9,5 kW
weight of the machine ca.:2,7 t
dimensions of the machine ca.:3,5 x 2,7 x 2,5 m
CNC SIEMENS 810 M
Indexing head with tailstock
4-fold toll changer table mounted
Used grooving machine
Internal machine number m3154
Type NF 1 / REP
year of manufacture 1969/89
Ma. No. 1 / 615
clamping surface 600 x 250 mm
groove length up to 200 mm
slot width up to 30 mm
Groove depth up to 100 mm
Drive power 1.4/2.2 kW
Speeds from 350 to 3,500 rpm.
Weight approx. 950 kg
Item location: 58730 Fröndenberg/Ruhr
The machine can be inspected and tested under power.
We will gladly send you more photos by e-mail.
A forklift / crane for loading is avai...
Slot milling machine make BUSCH type NF 1
machine. # 1/494 Year of manufacture 1963
throat 200 mm
spindle length 250 mm
table size 250 x 610 mm
4 spindle speeds 380-1500 rpm.
drive power 9,8 kW
outer dimensions 1050 x 900 x 1800 mm
used, in good condition
Model : LF 00
Machine No. : 719
Year of manufacture : ca.1960
Weight: ca. 400 KG
General / technical data:
used horizontal grooving milling machine with crank gear controlled groove length adjustment and automatic depth adjustment
groove width for cutter Ø: from 2 to 10mm
length of grooves in one cut: from 0 to 60mm + cutter diameter
10 depth feeds feeds: 0,03 to 0,3 mm
milling feed: 8 speeds of the milling carriage by crank stroke: 5,1 / 7,3 / 10,2 / 13,9 / 18,4 / 25,4...
Vertical slot milling machine, with shaft vice V 2 and various collets.
Traverse path milling head x-axis 200 mm
milling head y-axis 2 mm
sleeve z-axis 100 mm
Distance spindle centre to stand 200 mm
table surface 900 x 250 mm
Speeds spindle there. 450 - 3500 rpm.
Total drive power approx. 4 kW
Total weight approx. 1.1 t
Grooving machine Fab. HURTH Type LFV 3
Machine # 3566 estimated year of manufacture 1963
Slot width max. 30.35 mm
Travel X 550 mm
Travel Y 300 mm
Travel Z 400 mm
Spindle mounting ISO SK 40
carriage travel 240 mm
Depth feed spindle stroke 0-110 mm
Table size 300 x 1200 mm
table width 350 mm
Projection 415 mm
8 spindle speeds 90-1000 rpm
9 Crank feeds 1.4-22.4 p. min.
9 table feeds length 10,9-163 mm/min
Table drive 0,37 kW
spindle drive approx. 2,5 kW
spindle throat 410 mm
Aut. keyway and slot milling machine make RUWO HAHNDORF
Type AF 56 Machine. # 63/2445/1 Year of construction 1963
Slot length 350 / 400 mm
Groove width up to 50 mm
Groove depth 15 - 40 mm
depth feed 0,1 - 0,5 mm
Infeed pitch 0.1 mm
Form feed 50 / 80 / 120 mm/min
7 spindle speeds 180 - 1000 rpm.
large shaft diameter 170 / 330 mm
tool holder MK 2
drive power 1,1 / 0,6 PS
Drive power of the side feed 0.17 HP
Dimensions L x W x H 1000 x 500 x 1100 mm
Weight approx. 270 kg
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not assume liability for the content of linked external websites.