Used Planer-type milling M/C - double column for sale

Metal processing machinery Milling machines Planer-type milling M/C - double column

Listing

9094 km

Double Column Milling M/C - Gantry Type

KRAFT HDT-18|HDT-21|HDT-24

new

Call

:HDT-18|HDT-21|HDT-24 x-travel:2000/4000/6000/8000/10000/12000/14000/16000/18000/20000 mm y-travel:1800|2100|2400 mm z-travel:800/1000 mm distance between columns:1850|2150|2450 mm 9uecccke w-axis:N/A table width:1200|1500|1800 mm table length:= X-Weg distance spindle nose and table:555~1355 mm spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:18,5/22 kW (mehr auf Anfrage) feed speeds:X/Y/Z: 15/15/12 m/min machine length:6,5~23,5 m machine width:5,9|6,2|6,...

Listing

Ladis

(dealership location)

18603 km

Portal - Machining Center

WALDRICH-COBURG MULTITEC 2500 AP

2002

used

Call

x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D Bz30krhvjk w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 total powe...

Listing

Albion Works, Savile St, Sheffield S4 7UD, UK

18620 km

Plano Milling machine

Noble and Lund model P/RLMA

1982

excellent (used)

Call

Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) Bs3tykri DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(9...

Listing

Babberich

18541 km

5 Axis portal 120000 x 7300 x 3000

Waldrich Siegen PF-F 150 530/400

good (used)

- Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) - X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - ...

Listing

Kleinostheim

18541 km

Double Column Milling M/C - Gantry Type

TRIMILL VF3016

2017

used

Call

x-travel 3.000 mm y-travel 1.600 mm z-travel 1.200 mm control HEIDENHAIN iTNC530 HSCI B-axis (swivelling head) +/- 100 ° C-axis (milling head rotation axis) +/- 240 ° feed and rapid traverse : rapid feed Y,X,Z 40.000 m/min Rapid traverse B- and C-Axis 50 rpm Accelerations (X, Y and Z) 4 m/s² Machine table: : Clamping surface 3.500 x 1.750 mm T-slots 27 x 22 mm H12 T-slot - distance 125 mm max. workpiece load 7.000 kg/m2 Max. distance table to spindle nose 1.356 mm 2-Axis Fork Milling Head T...

Discover more used machines

Milling machines - univ.NC/CNC 500-699mm X-axis travel

Universal milling and boring machines

Portal

Double column mill

Portal milling

Milling mashinebridge type

Portal measurement machine

Cat m 318 c

Planer type milling machine

Portal milling machine

Listing

Tata

18032 km

PowerControl 5-axis portal milling

PowerControl 5-axis

2005

good (used)

Call

Portal milling machine, CNC milling machine, suitable for processing wood, plastic and aluminum Cro7xkati2 Manufactured: 2005 Working area: 2250 x 1500 mm Number of axes: 5 CNC program: Mach 3 Overall dimensions with safety fence: 3700 x 3700 x 2500 mm

Listing

9094 km

Double Column Milling M/C - Gantry Type

KRAFT SD(W)-24|SD(W)-28|SD(W)-32

new

Call

:SD(W)-24 | SD(W)-28 | SD(W)-32 x-travel:6000/8000/10000/12000/14000/16000/18000/20000/22000/240 00/36000 mm y-travel:2400|2800|3200 mm z-travel:1100/1400 mm distance between columns:2450|2850|3250 mm w-axis:1500/2000 mm für SD(W) table width:1600|2000|2400 mm table length:= X-Weg distance spindle nose and table:SD: 1080mm ~2180mm (1020mm-2420mm); SD(W): 800mm~800mm+Z+W spindle cone:SK 50/BT 50 turning speeds:6000 U/min (mehr auf Anfrage) spindle drive:22/26 kW (mehr auf Anfrage) feed spe...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

18105 km

Cutting plotter

COMAGRAV DIGI 1720

2014

good (used)

Call

Catalog No. : 6078 0b2gs Type: DIGI 1720 Producer: COMAGRAV Made in: 2014 Characteristic: 3D control system: PILOT TDP Operating system: Windows IoT Enterprise Length of the table: 1700 mm Width of the table: 2000 mm Max. Speed: 1150 mm/s Weight: 1170 kg Equipment: Vacuum pump Becker Z sensor High-speed Interface 6 vacuum zones Tool holder U1 Camera system Sound suppressor Electric oscillating knife tool Roller controller

Listing

Albion Works, Savile St, Sheffield S4 7UD, UK

18620 km

Double Column Gantry Type Milling m/c

Asquith Butler Starcentre 250

1998

excellent (used)

Call

USED ASQUITH BUTLER STARCENTRE 250 TRAVELLING GANTRY TYPE MILLING CENTRE WITH SIEMENS 840D SL CONTROL - AVAILABILITY - Ex Site YOM 1998 - SERIAL NUMBER VPG 6055 UPGRADED AND RETROFITTED WITH SIEMENS 840DSL CONTROL IN 2016 AT A COST OF OVER £200,000.00 MACHINE CONSTRUCTION & FEATURES  TRAVELLING GANTRY, FIXED BED CNC MILLING CENTRE WITH AUTO INDEXING MILLING HEAD & ATC  INTEGRATED ROTARY TABLE CAPACITY 3000MM  SIEMENS 840D CONTROL SYSTEM MECHANICALLY UPGRADED AND RETROFITTED WITH SIEMENS ...

Listing

Ladis

(dealership location)

18603 km

Planer-Type Milling M/C - Double Column

INGERSOLL-BOHLE

1991

used

Call

x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 Ptow7 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Listing

Uttendorf

18385 km

5 - Axle portal milling machine

Breton Matrix 2 T

2015

excellent (used)

€320,000

EXW Fixed price plus VAT

Call

Travel : X - axis 2.200 mm Y - axis 2.500 mm Z - axis 1.000 mm A+C - axis head table size : 2000x3000mm 60 tool places iTNC530 HSCI Renishaw measuring probe Zcvmv3rj BLUM internal tool measurement /breakage monitoring spindle speed: 28.000rpm Power spindle 40kW Torque spindle 60Nm HSK-63 mounting IKZ / AKZ + belt filter system / chip conveyor

Listing

Litostrojska Cesta 42, 1000 Ljubljana, Slowenien

18357 km

Portal milling machine

WALDRICH COBURG 17-10 FP180

1978

excellent (used)

Call

Planer Type Milling Machine - Vertical (second hand) Manufacturer: WALDRICH COBURG Model: 17-10 FP 180 Manufact.date: 1978, generally overhauled 2013, dismantled on stock. Controls: CNC Haidenhain TNC 530i, new 2013 WORKING RANGE -MILLING- x-axis traverse 6800 mm y-axis traverse 3265 mm z-axis traverse 1010 mm w-axis traverse 1530 mm PORTAL / BRIDGE distance between columns 2450 mm-2600 mm TABLE clamp...

Listing

11179 km

Planer-Type Milling M/C - Double Column

KRAFT VM-3225 | VM-4225 | VM-5225

new

Call

:VM-3225 | VM-4225 | VM-5225 x-travel:3200|4200|5100 mm y-travel:3000/3400 mm z-travel:800/1000 mm distance spindle nose and table:235~1235 mm distance between columns:2550/3050 mm table-size:3350x2200|4350x2200|5350x2200 mm table load:15|18|21 t T-slot (width-distance-quantity):28x250x13|28x250x17|28x250x21 mm spindle cone:50 BT/SK spindle speed:6000 (opt.10000, 15000) 1/min spindle drive:22/26 kW Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm) rapid traverse in x-y-z axis:15/18...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

18105 km

Planer-type milling

Correa FP 30/30

1996

good (used)

Call

Catalog No. : 6213 Type: FP 30/30 Producer: CORREA Made in: 1996 Characteristic: Operating system: Heidenhain TNC 426 Length of the table: 3000 mm Width of the table: 1250 mm Axis X: 1800 mm Axis Y: 2500 mm Axis Z: 800 mm Number of axes: 4 pcs Total power: 44 kW Equipment: Cfbay30qmf Additional head

Listing

Halberstadt

18302 km

CNC - Portal milling machine

KOLB KLUEPPELBERG Cubimat YC 2000

2012

used

Call

Ref. -No.: 10290 Brand: KOLB KLUEPPELBERG Type: Cubimat YC 2000 Year of construction: 2012 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Max. Workpiece Weight: ca. 18 t X-Travel: 3.650 mm Y-Travel: 3.500 mm Z-Travel: 4000 mm W-Travel: 2.000 mm Emm8bqdd Speed work spindle: 4.000 RPM Max. Torque: 2.100 Nm Table-Size (Lxw): 2.800 x 2.000 mm Tool Taper: SK 50 Distance Between Columns: 3.200 x 3.600 mm Machine number: 016453-20.1 ...

Listing

Ladis

(dealership location)

18603 km

Planer-Type Milling M/C - Double Column

WALDRICH-COBURG POWERTEC 4000 AP

1995

used

Call

x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min Cls2yfn spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid trave...

Listing

Bühl

18681 km

Engraving Machine

DECKEL G 1 L

1960

used

Call

x-travel 300 mm y-travel 160 mm z-travel 300 mm table surface area 500 x 200 mm size of template table 550 x 325 mm transmission ratio 1 : 1 bis 1 : 50 milling spindle speed 1.600 - 20.000 U/min workpiece weight max. 100 kg total power requirement 0,25 kW weight of the machine ca. 255 kg dimensions of machine L x W x H 0,95 x 0,90 x 1,24 m Accessories: rolls engraving device DECKEL, GVW 100; Glyj3sd 1 letter and number stencil set each

Listing

18698 km

Portal - Machining Center

DROOP + REIN FOG 25 43 H

1996

used

Call

x-axis 4.500 mm y-axis 2.500 mm z-axis 1.200 mm Control ATEK 6000 HS Main spindle: turning speed range - main spindle 1: max. 10.000 min/-1 power capacity - main spindel 1: 15 kW tool taper 1: HSK 100 turning speed range - main spindle 2: max. 16.000 min/-1 power capacity - main spindel 2: 11 kW tool taper 2: HSK 63 turning speed range - main spindle 3: max. 24.000 min/-1 power capacity - main spindel 3: 7 kW tool taper 3: HSK 50 turning speed range - main spindle 4: max. 35.000 min/-1 pow...

Listing

11179 km

Planer-Type Milling M/C - Double Column

KRAFT VM-2018 | VM-3018 | VM-4018

new

Call

:VM-2018 | VM-3018 | VM-4018 x-travel:2300|3200|4100 mm y-travel:2000 mm z-travel:800 mm distance spindle nose and table:180~980 mm distance between columns:1840 mm table-size:2300x1600|3200x1600|4100x1600 mm table load:8|10|12 t T-slot (width-distance-quantity):22x180x8 mm spindle cone:50 BT/SK spindle speed:6000 (opt.10000) 1/min spindle drive:15/18,5|22/26|22/26 kW Spindle motor torque:560/662 Nm (bei 10000 1/min: 140/165 Nm) rapid traverse in x-y-z axis:20/20/15|20/20/15|15/20/15 m/min fee...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

18105 km

Cutting plotter

COMAGRAV DIGI 1715

2016

good (used)

Call

Catalog No. : 6077 Type: DIGI 1715 Producer: COMAGRAV Made in: 2016 Characteristic: 3D control system: PILOT TDP Operating system: Windows IoT Enterprise Length of the table: 1700 mm Width of the table: 1500 mm Max. Speed: 1150 mm/s Weight: 770 kg Equipment: Vacuum pump Becker Z sensor High-speed Interface 6 vacuum zones Tool holder U1 Camera system Sound suppressor Electric oscillating knife tool G3d97c2t Roller controller

Listing

Ennepetal

(dealership location)

18538 km

Machining Center - Universal

AXA UPFZ 40

1998

used

Call

x-axis 8000 mm y-axis 3500 mm z-axis 1150 mm control Siemens 840 D Powerline Spindle power 40 kW weight of the machine ca. 32 kg turret capacity 50 stck. tool taper SK40 turning speeds 30 - 6000 U/min weight of the machine ca. t required space 12,3 x 6,5 x 4,3 m - Universal portal machining center model UPFZ 40 - built in 1998 - with tool changer and CNC control Siemens 840 D - Machine was completely revised in 2010 and with new controls Fitted. - The main spindle was replaced on August...

Listing

18384 km

Planer-Type Milling M/C - Double Column

ZIMMERMANN FZ 37

2001

used

Call

x-travel 3500 mm y-travel 2500 mm z-travel 1250 mm 39jgep7o control FIDIA C20 c-axis +-300 ° milling-head swivable +/- 110 ° rapid traverse 20 m/min spindle turning speed range 15000 U/min tool taper HSK 63A table dimension - longitudinal 3500 mm table dimension - cross 2500 mm column daylight 3640 mm total power requirement kW weight of the machine ca. 35 t dimensions of the machine ca. 6,4 x 5,9 x 4,8 m The ZIMMERMANN FZ 37 portal milling machine is in very good condition. can be inspe...

Listing

Dautphetal

18509 km

FOOKE Endura 705 portal milling machine

FOOKE 705 linear

2010

excellent (used)

Call

Machine number:25300 Operating hours:35896 We offer a well-preserved portal milling machine. Only aluminum and ureol were processed on the machine. The machine is regularly serviced by Fooke. We are happy to mediate and support you in the event of a possible relocation. Manufacturer FOOKE Type Endura 705 Linear Year of construction 2010 Control Fidia C20 x-way 2,800mm y-way 2,300mm z-way 1,100mm Control Fidia C20 Main spindle: speed range - main spindle max. 20,000min / -1 drive power - main s...

Listing

Wijchen

(dealership location)

18567 km

Portal milling machine Heidenhain D&R 5 assig

Droop & Rein, Heidenhain 5000x3900x2000, iTNC 530

used

Call

Milling machine, miller Model: 5 Axes Portalmilling machine Model: CNC Fabrikant: Droop &amp Rein Type: FASH 2500 R 50 kc NW E3cv8ed Control: Heidenhain iTNC 530 Full Retrofit 7-2019! Original-YoM: 1986 Working hours: 47826h Travel: 5000x3900x2000+500mm&nbsp Table: 5000x5100mm Max. Workpiece weight: 40T Spindle: 50kW Spindle-speed: 0-24000rpm Complete with peripherals, multiple milling heads, tools, documentation etc. Video is available.

Listing

Spanien

19912 km

Planer-Type Milling M/C - Double Column

CORREA FP40/40

2022

used

Call

x-travel:4000 mm y-travel:2500 mm z-travel:1000 mm Year of manufacture: 1990 retrofitted: 2014 Numerical control: HEIDENHAIN TNC-530 Co3f3kjr3f Traverses of axis X Axis traverse: 5000 mm Y Axis traverse: 3300 mm Distance between columns: 2700 mm Z Axis traverse: 1000 mm (500/1500) Milling head Head type: Universal manual Tool clamping system: Hydraulic Taper nose: ISO 50 DIN 69871 Speed range: 20 - 4000 rpm Spindle power: 42 kW Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 9...

Listing

Nidderau

(dealership location)

18532 km

Planer-Type Milling M/C - Double Column

WALDRICH COBURG MULTITEC 2500 AP

2001

used

Call

x-travel 4000 mm y-travel 3500 mm z-travel 1500 mm Control Siemens Sinumerik 840 D Ckbdqs7yzh total power requirement 45 kW weight of the machine ca. t dimensions of the machine ca. m

Listing

Hünxe

18536 km

Planer-Type Milling M/C - Double Column

WALDRICH-COBURG 20-10 FP 280

used

Call

x-travel 17700 mm y-travel 4755 mm z-travel 800 mm milling width 3450 mm distance table - vertical milling spindle 3682 mm table height over floor 500 mm spindle diameter in front bearing 200 mm turning speed range 12 - 450 U/min tool taper ISO 60 axial adjustment of the spindle slide 800 mm creep feed 5 und 50 mm/min feed stepless 10 - 3000 mm/min cross adjustment of cross beam milling head 4745 rapid traverse 2 m/min creep feed 3 und 30 mm/min feed stepless 6 - 2000 mm/min rapid traverse 2 m...

Listing

18384 km

Planer-Type Milling M/C - Double Column

FOOKE Endura 905 linear

2006

used

Call

x-travel 7000 mm y-travel 3000 mm z-travel 1751 mm tool taper HSK A-63 turning speeds 20000 U/min tool change unit 20 -fach Control FIDIA C20 spindle motor 20 kW rapid traverse 65 m/min milling head -swivable +/- -95 / +125 ° milling head swivable ca. +-275 ° Number of axles 5 simultan St. total power requirement kW weight of the machine ca. 105 t dimensions of the machine ca. 12,2 x 6,3 x 5,8 m Gxwnl32 The machine is in good condition and can be inspected under power by arrangement with ...

Listing

Ennepetal

(dealership location)

18538 km

Planer-Type Milling M/C - Double Column

WALDRICH-COBURG MULTITEC 2500 AP

2001

used

Call

x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm w-axis 1500 mm Control Siemens Sinumerik 840 D total power requirement 45 kW weight of the machine ca. / t Universal portal milling machine Pallet system: 2-fold traverse paths Pallet carrier longitudinal (X-axis): 4000mm Milling and drilling unit horizontal (Y-axis): 3500mm Spindle slide vertical (Z-axis): 1500mm Transom vertical (W axis): 1500mm Passage width between stands: 2500mm Headroom between pallet and spindle nose: 2500mm adjustment sp...

Listing

Correa Milling machine CORREA FP40/50FP40/50

Burgos

(dealership location)

19836 km

Bridge type

Correa Milling machine CORREA FP40/50FP40/50

1998

good condition (used)

Call

Retrofitted: 2023 Numerical control: SIEMENS 840D Technical features Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 13 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 3250 mm Z axis traverse: 1000 mm Distance between columns: 2500 mm Milling head Head type: C5E- 2 axis continuous head Tool clamping system: Hydraulic Taper nose: BT 50 Speed range: 40 - 4000 rpm Spindle ...

Listing

11179 km

Planer-Type Milling M/C - Double Column

KRAFT/Skymaster VF-1290 (Highspeed)

2021

new

Call

x-travel:1200 mm y-travel:800 mm z-travel:500 mm distance spindle center to table:150-650 mm distance between columns:920 mm table-size:1320x800 mm B3gtyusa table load:2000 kg T-slot (width-distance-quantity):14x120x7 mm spindle taper:HSK- A63 spindle speed:15000 (Direktantrieb) U/min spindle drive:9/15 kW Spindle motor torque:57.3/120 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~10000 mm/min Tool changer:20 max. tool diameter:100 mm max. tool length:235 mm ...

Listing

Siegen

18532 km

Planer-Type Milling M/C - Double Column

Reichenbacher Hamuel Shape 2000 - 5 axis

1999

used

Call

x-travel: 3 500 mm y-travel: 2 200 mm z-travel: 1 200 mm c-axis: +/- 200° control: Heidenhain TNC 426 spindle rpm - counter clockwise:: max. 10000 spindle rpm - clockwise:: max. 10000 distance between columns: 2 500 mm distance spindle /table: vertical: 1230 mm clamping surface area: Tisch: 3000 x 2000 mm table load: 10 t tool taper: HSK A 63 feed:: X/Y/Z: max. 20 m/min. compressed air: 8 bar total power requirement: ca. 100 kW weight of the machine ca.: 40 000 kg dimensions of machine: 18,0 x 6...

Listing

Králova 279/9, 616 00 Brno-Žabovřesky, Tschechien

18106 km

Portal milling machine

TOS Kuřim FREP 12x34

1985

good (used)

Call

Type: FREP 12x34 Description: a plane milling machine of very rigid construction with two stands, a crossbar and four spindles, for machining horizontal, vertical and inclined surfaces on heavy workpieces. Manufacturer: TOS Kuřim Year of manufacture: 1985 Table size: 1200 x 4000 mm, Max. workpiece height 1200 mm X-axis feed: 3500 mm Y-axis feed: 1200 mm Qow2b Z-axis feed: 1400 mm Two milling supports vertical and two lateral

Listing

18384 km

Planer-Type Milling M/C - Double Column

ZIMMERMANN FZ33c

2016

used

Call

x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed range 25000 U/min tool taper HSK 63A table dimension - longitudinal 2500 mm table dimension - cross 3250 mm milling-head swivable +/- 110° c-axis +/-300° feed 60 m/min. chip conveyor JA spindle drive 45 kW tool change unit 50 Positionen total power requirement kW weight of the machine ca. 60 t dimensions of the machine ca. 7600 x 7300 x 5650 mm This ZIMMERMANN FZ33c is in very good cond...

Auction

Kreuztal

18528 km

CNC portal milling machine

DÖRRIES SCHARMANN 3FZT 250-200-600

1994

used

€50,000

Bidding plus VAT
31 days left

Details

working spindle, speed max. 2.000 rpm, travel X/Y/Z 6.400 x 2.950 x 2.000 mm, screen control, make Heidenhain, type TNC-426, spindle hours transmitted 52.900, feed 8 m/min, rapid traverse 13 m/min, table clamping area 6.000 x 2.500 mm, table load max. 40.000 kg, drive power spindle 60 kW, spindle mounting SK50, 3 change heads, machine dim. L/N/H 17,700 x 7,810 x 6,805 mm, machine weight approx. 174 t, integr. chip conveyor, make Bürener Maschinenfabrik, year 1995, ser. no. 9520174-300.1; repair ...

Listing

Correa CNC Milling machine CORREA FP40/40 – 895199FP40/40

Burgos

(dealership location)

19836 km

Bridge type

Correa CNC Milling machine CORREA FP40/40 – 895199FP40/40

2004

good condition (used)

Call

Retrofitted: 2023 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4000 x 2000 mm Number of T slots: 11 T slots dimensions: 22 mm Wayjlhm Traverses of axis X axis traverse: 4000 mm Y axis traverse: 3000 mm Distance between columns: 2530 mm Z axis traverse: 1000 mm Milling head Head type: NEW! Auto-indexing UDG (2.5º) Tool clamping system: Hydraulic Taper nose: ISO50 Speed range: 20 - 3...

Listing

11179 km

Planer-Type Milling M/C - Double Column

KRAFT/Skymaster VF-1290 (Highspeed)

new

Call

x-travel:1200 mm y-travel:800 mm z-travel:550 mm distance spindle center to table:150-700 mm Bbpg3rrk distance between columns:920 mm table-size:1320x800 mm table load:2000 kg T-slot (width-distance-quantity):14x120x7 mm spindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/min spindle drive:7.5/11 (opt. 30/39; 20/26 kW Spindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m. rapid traverse in x-y-z axis:30000 (opt. 40000) mm/min Cutting feed rate X/Y/Z axis:1~10000 (op...

Listing

Niederhelfenschwil

(dealership location)

18685 km

Plano Type Milling Machine, ATC

DOERRIES SCHARMANN FTF 1600 S 63

1996

used

Call

CONTROLS .. CNC controls SIEMENS 840 C BASIC DESIGN .. basic design: plano type WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. .. among of them simultaneous CNC axes: 3 .. X-axis travel: 4500 mm .. Y-axis travel: 3800 mm .. Z-axis travel: 1400 mm .. distance spindle nose - table surface (max.): 1550 mm PORTAL / BRIDGE .. distance between columns: 2200 mm Llcwoudj TABLE .. table surface (left-right): 3500 mm .. table surface (front-back): 1600 mm .. workpi...

Listing

18384 km

Planer-Type Milling M/C - Double Column

WESTPHAL Techline M 510

2003

used

Call

x-travel 11200 mm y-travel 3130 mm z-travel 1000 mm Control NUM 1060 W A-axis +- 120 ° c-axis +215/-210 ° spindle motor 15 kW spindle taper HSK-F63 turning speeds 24000 U/min table width 1500 mm table length 9400 oder 2x3000 mm total power requirement kW weight of the machine ca. 20 t dimensions of the machine ca. 14,6x5,0x4,225 m V8utgguv Use: e.g. for processing aluminum panels, drilling profiles, advertising (signs milling, etc.), mold construction (prototypes) and processing of light s...

Listing

18384 km

Planer-Type Milling M/C - Double Column

BORNEMANN BW 2022

2016

used

Call

x-travel 2400 mm y-travel 1500 mm z-travel 810 mm Control HEIDENHAIN iTNC 530 spindle turning speed range 12000 U/min tool taper HSK 63A Bgr3ewxug table dimension - longitudinal 2400 mm table dimension - cross 1500 mm milling-head swivable +/- +110° / -95° table load 500 kg Number of axles 4 St. total power requirement kW weight of the machine ca. 8 t dimensions of the machine ca. 5 x 4 x 4,2 m

Listing

Lauchheim

(dealership location)

18541 km

Planer-Type Milling M/C - Double Column

ZAYER TEBAS-5000

2013

used

Call

x-travel 5.000 mm y-travel 3.750 mm z-travel 1.250 mm Control iTNC-530 HSCI table-size 5.200 x 2.200 mm distance between columns 3.000 mm feeds 50.000 mm feeds 30.000 mm/min milling head 0.001º/0.001º tool taper DIN 69871 AD 50 number of spindle speeds 6.000 U/min/rpm transmission ratio 3 spindle drive 43 kW tool change unit 20 - fach ( Vertikal) Internal cooling system 20 bar Chip coveyor 2 handwheel HEIDENHAIN HR-520 total power requirement 122,89 kVA weight of the machine ca. 33 t M...

Listing

Correa Bridge milling machine CORREA FP30/30 - 8900205FP30/30

Burgos

(dealership location)

19836 km

Bridge type

Correa Bridge milling machine CORREA FP30/30 - 8900205FP30/30

1996

good condition (used)

Call

Retrofitted: 2023 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 3000 x 1250 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 1800 mm Distance between columns: 1680 mm Z axis traverse: 800 mm Milling head Head type: Standard vertical spindle Tool clamping system: Hydraulic Taper nose: ISO 50 Speed range: 20 - 2000 r.p.m. Sp...

Listing

11179 km

Planer-Type Milling M/C - Double Column

KRAFT VM-3018A

2022

new

Call

x-travel:3200 mm y-travel:2000 mm z-travel:1000 mm distance spindle nose and table:200-1200 mm distance between columns:1820 mm table-size:3200×1600 mm table load:10 t T-slot (width-distance-quantity):22x180x8 mm spindle cone:50 BT spindle speed:6000 (Direktantrieb) 1/min spindle drive:22 kW Spindle motor torque:689/1692 rapid traverse in x-y-z axis:20/20/12 m/min feeds:1~10000 mm/min Tool changer:Vorbereitung für WZW workpiece length:350 mm tool diameter:110/225 mm weight of tools max.:20 kg ...

Listing

Eichenzell

18470 km

Series iMG 1010 for micromachining

isel Germany AG 283004 V0001

new

€44,950

EXW Fixed price plus VAT

Call

Micro machining - Efficiency to the power of 5 * For the making of precision parts in: -medical technology B7e3wyknuh -precision mechanics -micromachining -mould and prototype construction -dental technology -jewelry industry Features: -5-axis operation as standard -15-fold tool changer -low vibration -high accuracy through precision guides -large operating panel with 24" touch operation Popular materials: -Steel -Titanium -CoCr -Aluminum / light metals Options: -Machine base -automatic plac...

Listing

Tuřanka, 627 00 Brno-Slatina, Tschechien

18101 km

Plano Milling machine

FERMAT CZ GMB 2560 CNC

2022

refurbished (used)

Call

Plano Milling machine GMB 2560 CNC Producer: FERMAT CZ overhauled: 2023 Control Heidenhain ... TNC 640 Table dimension... 6000 x 2500mm Axis X ... 6000mm Distance between stand ... 3200mm Distance between the table and the crossbar ... 1900mm Spindle mount ... ISO 50. Spindle speed... 40-5500 rpm. Max. table load ... 22000kg Axis Y ... 3200mm Axis Z ... 1250mm Machine weight ... 88000kg Ckf82t0kcp Main engine power ... 41kW Rapid traverse ... 10m/min Total power requirement ... 83kVA Working sp...

Listing

18384 km

Planer-Type Milling M/C - Double Column

ZIMMERMANN FZ33c

2015

used

Call

x-travel 2500 mm y-travel 3000 mm z-travel 1250 mm Control HEIDENHAIN iTNC530 spindle turning speed range 22000 U/min tool change unit 50 -fach tool taper HSK 63 A rated capacity kVA milling-head swivable +/- 110° c-axis +-300° total power requirement 130 kW weight of the machine ca. 60 t dimensions of the machine ca. 7,6 x 7,3 x 5,7 m This ZIMMERMANN FZ33c is in a very good condition as new. The machine can be viewed under power by arrangement only until week 15. be inspected. Descri...

Listing

Correa Gantry milling machine CORREA PANTERAPANTERA

Burgos

(dealership location)

19836 km

Bridge type

Correa Gantry milling machine CORREA PANTERAPANTERA

2003

good condition (used)

Call

Retrofitted: 2022 Numerical control: SIEMENS 840 D Technical features Dimensions Table dimensions: 14.000 x 2.500 mm Number of T slots: 10 T slots dimensions: 22 mm Traverses of axis X axis traverse: 14.000 mm Y axis traverse: 3.100 mm Distance between columns: 4.417 mm Z axis traverse: 1.200 mm (220 - 1.420 mm) Milling head Head type: 5 Axis “C5C” Electrospindle 18.000 rpm Tool clamping system: Hydraulic Taper nose: HSK ...

Listing

18384 km

Planer-Type Milling M/C - Double Column

KRAFT VM-2018B

2018

used

Call

x-travel:2300 mm y-travel:2000 mm z-travel:1000 mm table-size:2300 x 1600 mm T-slot (width-distance-quantity):8x 22 x 180 mm max. table load:8 t distance between columns:1840 mm distance spindle nose and table:180~1180 mm spindle drive:22/26 kW max. torque on the spindle:662 Nm spindle nose:50 SK spindle speed:10000 (direkt) U/min rapid traverse X,Y:20000 mm/min. Bair3zxi rapid traverse Z-axis:15000 mm/min milling feed range:1~10000 mm/min Machine size (LxWxH):7027 x 5217 x 4339 mm total power...

Listing

Correa Bridge milling machine CORREA FP40/40 - 8950304FP40/40

Burgos

(dealership location)

19836 km

Bridge type

Correa Bridge milling machine CORREA FP40/40 - 8950304FP40/40

1997

good condition (used)

Call

Retrofitted: 2022 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 4000 x 1250 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3500 mm Y axis traverse: 2500 mm Distance between columns: 2040 mm Z axis traverse: 1000 mm Milling head Standard vertical spindle Tool clamping system: Hydraulic Taper nose: ISO 50 Speed range: 20 - 2000 r.p.m. Spindle powe...

Listing

Correa Milling machine CORREA FP40/40 – 895203FP40/40

Burgos

(dealership location)

19836 km

Bridge type

Correa Milling machine CORREA FP40/40 – 895203FP40/40

2004

good condition (used)

Call

Retrofitted: 2022 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4000 x 2000 mm Number of T slots: 11 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mm Y axis traverse: 3000 mm Distance between columns: 2530 mm Z axis traverse: 1000 mm Milling head Cg23cse0dp Head type: Universal manual UM40 Tool clamping system: Hydraulic Taper nose: ISO50 Speed range: 20 - 3000 ...