Used milling machines - univ.NC/CNC 700-999mm X-axis travel for sale (43)

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! Hjdeygx Hnjpfx Apdow All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: good (used), Year of construction: 1995, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 315 mm, feed length Z-axis: 175 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 495 mm, feed rate X-axis: 9 m/min, feed rate Y-axis: 9 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 9,000 rpm, spindle speed (min.): 50 rpm, quill travel distance: 175 mm, rapid traverse X-axis: 9 m/min, rapid traverse Y-axis: 9 m/min, rapid traverse Z-axis: 4 m/min, total width: 2,480 mm, total length: 1,620 mm, table width: 1,230 mm, table length: 410 mm, position of the milling head: vertikal, type of input current: AC, rotational speed (max.): 9,000 rpm, rotational speed (min.): 50 rpm, overall weight: 3,200 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, space requirement width: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 2,450 mm, input current: 25 A, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Due to restructuring measures, we are selling our CNC milling machine – Fehlmann Picomax 80 CNC 2/3 - robust Swiss precision machine - year of manufacture 1995 - low operating hours - very good condition considering its age - Heidenhain 315B control system - 4 axes (X, Y, Z + A [rotary axis]) - axes can be moved in parallel - travel distances X700 x Y315 x Z170 (+W495) mm - table 1,320 x 410 mm - 4th axis (rotary axis) AT100 original Fehlmann with 140mm three-jaw chuck and collet chuck - manual control panel - spindle 50 – 9,000 rpm - complete steel sheet enclosure with safety glass - fully functional - complete operating and programming manual - spare parts and service available from Fehlmann - machine can be inspected while powered on Depending on the price, a wired measuring probe (Renishaw), an electric fine milling and grinding spindle from RAY (Switzerland) 10,000 - 40,000 rpm, and various tool holders can be included. Hedpfx Apezzd Hhjdew This offer is subject to change. Subject to prior sale. No online sales. The sale is only to commercial customers after inspection and acceptance on site. Due to the age of the machine, the sale is made with the exclusion of any warranty. Pick-up only (EXW) - no shipping.

Condition: excellent (used), Year of construction: 2006, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 28,000 rpm, rotational speed (max.): 28,000 rpm, Heidenhain 530 control system. Hjdpfxj Afzgps Apdow 28,000 RPM spindle. HSK63 A tool interface. 80 bar coolant pressure. Chip conveyor. Blum tool measuring system. Renishaw probe. Numerous accessories, holders, and vices, and much more. New spindle to be installed in summer 2024.

Condition: used, Year of construction: 1999, operating hours: 43,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, total height: 2,400 mm, total width: 2,600 mm, total length: 2,600 mm, type of input current: three-phase, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 500 kg, number of slots in tool magazine: 24, number of axes: 3, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 80 E machining center, manufactured in 1999, for sale. Serial number: 1109.0001113 Year of manufacture: 1999 Can be inspected while powered on Control system: Heidenhain 426m with internal hard drive If you have any questions or require further information, please do not hesitate to contact us via message or phone. The machine can be disassembled by the buyer. Hsdpjz E Dl Nofx Apdjw No direct sales to countries outside the EU. We will not handle customs clearance.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS Hedez Eh Egepfx Apdew THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Condition: good (used), Year of construction: 1999, Brand: Dahlih Model: DL-MCV720 Year of manufacture: 1999 Control: CNC Controller: FANUC Table dimensions (mm): 950 x 560 mm Table load capacity (kg): 500 kg X-axis travel (mm): 720 mm Y-axis travel (mm): 460 mm Z-axis travel (mm): 510 mm Feed rates: 1-10000 mm/min Rapid traverse rates: 20000 mm/min Spindle taper: ISO 40 Spindle speed (rpm): 8000 RPM Number of tool positions in tool changer: 24 Hodoz Dpzgjpfx Apdow Coolant system: yes Power (KW): 7.5 kW Dimensions L x W x H (mm): 2750 x 2200 x 2200 mm Machine weight (kg): 4400 kg Description: Complete machine with external HABOR spindle cooling & including pallet with tooling, tools and documentation.

Condition: used, Year of construction: 1973, x-travel:815 mm y-travel:400 mm z-travel:410 mm quill stroke:130 mm turning speed range - stepless:67 - 2300 U/min :8 feed speeds:0,04 - 0,08 - 0,15 mm/min feeds of table:15 - 230 mm/min table surface area:1120 x 255 mm T-Slots:3 mm T-slot - width:16 mm T-slot - distance:63 mm distance spindle - column:260 mm ram adjustment:315 mm main drive motor:1,5 kW weight of the machine ca.:1,0 t Hsdpfxj Ad Si Te Apdow dimensions of the machine ca.:1,75 x 1,80 x 2,10 m

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Hedpfx Apjzvnhrjdsw Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW machine in stock.

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. X-Axis travel: 800 mm Hodpfxezpfg Ee Apdow Y-Axis travel: 800 mm Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, Mikron UMS 900 with internal coolant system and 4th axis Considering its age, the machine is in good condition and fully functional. A special feature is the machine’s internal coolant system and full-fledged 4th axis. In addition, it has an HF spindle from Fischer with a cooling unit that can be swiveled into position. Equipment: - X-axis 900mm / Y-axis 630mm / Z-axis 500mm - Table dimensions: 1200x600mm - Internal coolant system through the spindle Hodpfxjz Iz I He Apdsw - Spindle speed max. 6300 rpm with SK40 - 4th axis as a rotary table, Hoffmann RWC 160 with jaw chuck - Tool changer for SK and HSK tool holders - HF spindle Fischer 42,000 rpm with HSK40 - Electric handwheel - Full protective enclosure - Complete documentation available - Control cabinet very clean - Many tool holders included The screen is not defective; the black shadows are due to the photography. Several components have already been renewed, e.g., the spindle bearings; the Y-axis has been overhauled. The absolute special feature is the internal coolant supply through the spindle! If you have any questions or need more information, please send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2025, The machine is on display. OPTIMUM F 200 HSC Premium CNC milling machine, directly from the manufacturer. F 200 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by its performance, speed, precision, and long service life. Heavy-duty design · High productivity · High reliability · Heavily ribbed, torsion-resistant machine base · Profile rail with recirculating roller guides for high rapid traverse speeds in all axes · Powerful servo drives in all three axes · Telescopic guide cover on all three axes · Automatic lubrication · Solid, precise milling table with five T-slots, large dimensions, and precision-ground surface · The portable, electronic handwheel with feed override button and emergency stop switch facilitates the easy execution of programs Nwswouy Tckex Eb Ncsi · Coolant system with chip flushing system and cleaning gun · Spindle internal cooling with 20 bar · Chip conveyor in belt design ensures efficient chip removal · Chip cart · RJ45 connection and power connection 230 V · Enclosed control cabinet with integrated heat exchanger ensures optimal temperature and prevents the ingress of dirt particles · Machine light in the work area · Additional package SIEMENS material defect liability and free online/on-site service OSS Plus · 1 year maintenance contract Basic included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected power 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque of drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque of drive motor S6-30% operation 125 Nm Spindle mounting SK 40 / DIN 69871 Coolant system Performance of coolant pumps, 3 pieces 1 kW Flow rate 35 l/min Tank capacity 200 liters Cleaning pump Performance of cleaning pump 530 W Milling accuracy Repeatability ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Type Double-arm gripper Number of tool positions 24 Tool diameter max. 78 mm Tool diameter (auxiliary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time for tool change: Tool to tool 2.5 seconds Travel range X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X, Y, Z axis 48 m/min Torque motor X/Y/Z axis 16 Nm / 16 Nm / 20 Nm Feed forces X/Y/Z axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / spacing 18 mm / 5 / 100 mm Load capacity max. 500 kg Dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Hodezi Ex Uepfx Apdsw Total weight 5,500 kg

Condition: good (used), Year of construction: 2014, CN HEIDENHAIN TNC 530 Spindle: electric spindle, rotational speed: 12,000 rpm Travel in X/Y/Z: 750 x 560 x 560 mm Table: 1000 x 600 mm – Ø 600 mm Rapid traverse rates: B-axis: 35 rpm, C-axis: 40 rpm EQUIPMENT: Tool changer: 24 positions Tilting head: +30° / -120° Centralized lubrication Chip conveyor Complete mechanical inspection Electrical cabinet compliant with standards High-pressure coolant: 25 bars Overall dimensions: 4950 x 2950 x 2600 mm Hsdpfjzya Ufsx Apdjw Warranty for proper operation

Condition: used, Year of construction: 1986, functionality: fully functional, x-travel 710 mm Hodpfxewu Dfme Apdew y-travel 600 mm z-travel 500 mm NC rotary table 630 mm Spindle taper SK 40 Spindle speeds 18 - 6300 rpm DIALOG 4 control Feed rate 2 - 3600 mm/min Rapid traverse 6 m/min Max. table load 485 kg Swivel stroke 80 mm Spindle motor 9.5 kW Total required power 20 kVA Machine weight approx. 4.6 t Dimensions L x W x H 3.8 x 2.24 x 2.35 m Accessories: LNS Fox ws 2-1500 filter unit with 2 new filters in box, 2 cabinets full of tools This machine is stored at our facility.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Hjdsx D Tbmopfx Apdow Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, Table 1270 x 320mm, table load 500 Kgs Traverses XYZ: 800 x 508 x 575mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 7.5HP, Hedpfoy Exy Tsx Apdsw Spindle Speeds 40-5,000rpm, Heidenhain TNC320 CNC Control,

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Hjdpexk Tzgofx Apdjw

Condition: used, Year of construction: 2004, CNC Milling machine PMER type DPM Travel X: 780 mm Travel Y: 410 mm Travel Z: 550 mm Numerical Command ANILAM type 5000 M Cone: ISO 40 Spindle exit: 120 mm (manual) Spindle speed: from 70 to 3800 RPM Table size: 1270 x 320 mm Year of construction: 2004 Maxi distance spindle nose/table: 500 mm Hedpfxoz Nx Ete Apdew Mini distance spindle nose/table: 100 mm Swivel head right/left Jog crank Possibility to work manually (with cranks) or driven by the CN Lubricant pump Voltage: 380 V Width: 1900 mm Depth: 2100 mm Total height: 2500 mm Weight: 2,5 T

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, For sale are spare parts from a 3-axis CNC machining center of the brand Ingersoll, model OPS 800. Ideally suited for the production of graphite electrodes thanks to its high-speed spindle. Hsdpfeuu Rthox Apdjw The machine has been disassembled, and individual components such as the controller, extraction system, spindle, and control panel are available for sale. Please let us know which parts you require, and we will provide you with a tailored offer. Technical Data: Year of manufacture: 2004 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 500 mm Control system: ANDRON Spindle speed: 42,000 rpm Tool changer: 36 positions Tool holder: HSK 63 Included: - Graphite dust extraction system - Chip trays - Cooling system Tooling not included. Transport and loading can be organized throughout Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website.

Condition: as good as new (ex-display), Year of construction: 2025, Machine currently on display. Optimill F 300 HSC Premium CNC milling machine, direct from the manufacturer. F 300 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control features outstanding performance, speed, precision, and long service life. • Heavy-duty construction • High productivity • High reliability • Strongly ribbed, torsion-resistant machine base • Linear guideways with roller recirculation on all axes for high load capacity • High-torque servo drives directly coupled to the ball screws in all three axes • Precision-ground, preloaded high-performance ball screws for rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Main spindle SK40 with spindle speed up to 15,000 rpm, inline spindle • Solid, precision-ground milling table with five T-slots, generously dimensioned • Portable electronic handwheel with enabling switch and emergency stop impact switch significantly simplifies program setup • Automatic tool changer with double-arm gripper, 30 tool stations • Coolant unit with chip flushing system and cleaning gun • Through-spindle coolant 20 bar • Belt-type chip conveyor ensures efficient chip removal • Chip cart • Oil separator • Machine light in working area • Additional SIEMENS warranty package and free online/on-site service (OSS Plus) • 1 year basic maintenance contract included for Germany, Austria, Switzerland • Control unit • 15.6" color display • 16:9 format • Complete package • Safety Integrated Hjdpfx Aeymd Epspdsw • Remainder material detection and processing • ShopMill operation step programming • Network drive management • 3-D simulation • Program tracing • Additional Siemens OSS PLUS package • 12 months; Item No. 3589020 • 24 months; Item No. 3589021 • 36 months; Item No. 3589022 Equipment details • Inline spindle • SK 40 / DIN 69871 spindle taper • Spindle speed 15,000 rpm Dimensions and weight • Length approx. 2856 mm • Width/depth approx. 2300 mm • Height approx. 2850 mm • Weight approx. 6500 kg Rapid traverse speed • X-axis 36 m/min • Y-axis 36 m/min • Z-axis 32 m/min Electrical data • Supply voltage 400 V • Mains frequency 50 Hz • Electrical connection • Total connected load 30 kVA Milling table (horizontal) • Length 1200 mm • Width 600 mm • T-slot size 18 mm • Number of T-slots 5 • T-slot spacing 100 mm • Maximum load capacity 800 kg Accuracy • Repeatability ± 0.005 mm • Positioning accuracy ± 0.005 mm Travel • X-axis (automatic) 1000 mm • Y-axis (automatic) 620 mm • Z-axis (automatic) 630 mm Vertical spindle • Spindle taper SK 40 DIN 69871 • Speed range 15,000 rpm • Continuous operation motor power (S1) 20 kW • Motor power (S6-30% duty cycle): 52.4 kW • Continuous torque (S1): 96 Nm • Torque at 30% duty cycle (S6): 250 Nm Feed force • X-axis feed force: 6.68 kN • Y-axis feed force: 6.68 kN • Z-axis feed force: 12.01 kN Feed drive torque • X-axis continuous operation (S1): 20 Nm • Y-axis continuous operation (S1): 20 Nm • Z-axis continuous operation (S1): 36 Nm Tool changer • Double-arm gripper • Number of tool stations: 30 • Max. tool length: 300 mm • Max. tool weight: 8 kg • Tool-to-tool change time: 2.5 seconds

Condition: used, Year of construction: 2002, CNC Milling machine PMER type S120 Travel X: 1200 mm Travel Y: 630 mm Travel Z: 600 mm Numerical Command ANILAM 5300 (Defective ANILAM screen changed by a PC screen + PC keyboard) Cone: BT 40 Spindle speed: from 50 to 6000 RPM Hedpfxoz Nx Eyj Apdew Table size: 1600 x 500 mm Year of construction: 2002 Maxi distance spindle nose/table: 730 mm Mini distance spindle nose/table: 130 mm Diameter of the spindle sheath : Ø 150 mm Pneumatic tool clamp Central lubrication Lubricant pump Voltage: 380 V Width: 2300 mm Depth: 3600 mm Total height: 2600 mm Weight: approx 4,5 T

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Hsdpfxsxtu H No Apdow DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2018, CNC control: Fanuc Series Oi-MF New machine, only 150 spindle hours - Flat guideways - Gearbox - Internal cooling - Various tool holders and 1 vise Travel paths X-travel 850 mm Y-travel 530 mm Z-travel 530 mm Spindle nose (to table surface) 100-630 mm Spindle axis to column surface 590 mm Table Table size 530 x 950 mm Maximum table load 800 kg T-slots (W x NO. x P) 18 x (5) x 100 mm Spindle Spindle speed 8000 rpm Spindle mount BT-40 Spindle power 7.5/11 kW Feed rate Rapid positioning speed 20 / 20 / 20 m/min. Cutting feed rate: 1 – 10,000 m/min. Automatic tool changer Number of tools: 24 Tool taper: BT-40 MAS Tool holder bolt: P-40T (45°) Hedpfjwa Ip Hox Apdjw Max. tool diameter: Ø 80 mm Max. tool diameter (no adjacent tool): Ø 150 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool to tool): 2.5 sec Tool change time (chip to chip): 6 sec Machine dimensions: Floor area: 2450 x 2700 mm Machine weight: 6000 kg Max. machine height: 2900 mm Air supply connection: 7 kg/cm2

Condition: as good as new (ex-display), Year of construction: 2025, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 150 E CNC milling machine direct from the manufacturer. F 150 E - The OPTIMUM CNC milling machine with Siemens control SINUMERIK 808D Advanced is characterized by performance, speed, precision and long service life. Carousel tool changer with 16 tool positions All linear guides with stainless steel covers Automatic central lubrication Siemens main spindle motor Servo drive from SIEMENS in all axes (closed control loop) Chip conveyor in belt design ensures efficient chip removal Chip trolley Max. Spindle speed 10,000 min-1 Machine light in the work area Portable, electronic handwheel with enabling switch and emergency stop switch. Makes running in programs considerably easier Hjdpfeymdygsx Apdow Coolant system with 190 liter coolant tank Tools are changed automatically or at the touch of a button Solid, exact milling table, large dimensions and precise surface finish Access doors very generously designed to reduce cleaning and maintenance time to a minimum Software package "SINUMERIK 808D on PC" included. (Practical training software so that workpieces can be programmed and simulated offline on the PC. Software can be downloaded free of charge at). SINUMERIK 808 ADVANCED - CNC technology from the technology leader, paired with a revolutionary operating concept The SINUMERIK 808D ADVANCED control is a panel-based CNC control. The compact and user-friendly entry-level solution is used for simple milling applications. Features such as simple operation, commissioning and maintenance are the perfect basis for equipping CNC machines. Thanks to its technology-specific features, the SINUMERIK 808D ADVANCED control is perfectly preconfigured for milling. Thanks to the hardware and software extensions, the SINUMERIK 808D ADVANCED also offers sufficient performance for simple milling functions in mold and tool making. Compact and robust Thanks to a panel-based CNC design with few interfaces and a control panel in protection class IP65, the SINUMERIK 808D ADVANCED is perfectly prepared for use in harsh environments. The small dimensions allow it to be used in compact machines INCLUDED RJ45 Ethernet port 8.4" LCD color display with 800 x 600 resolution Prepared for remote maintenance AST function; enables simple optimization for higher dynamic and accuracy requirements Absolute encoder / no reference run required Higher accuracy Travel distance: X=750mm Y=500mm Z=500mm Dimensions and weights Length approx. 3420 mm Width/depth approx. 2050 mm Height approx. 2400 mm Weight approx. 4500 kg Drilling/milling capacity Cutter head size max. 80 mm End mill size max. 38 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 15 kW Horizontal milling table Length 900 mm Width 500 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 600 mm T-slots size 18 mm Number of T-slots 5 T-slot spacing 80 mm Load capacity max. 350 kg Accuracy Repeat accuracy ±0.005 mm Positioning accuracy ±0.01 mm

Condition: as good as new (ex-display), Year of construction: 2025, The machine is currently on display. Optimill F200 ECO Premium CNC Milling Machine—direct from the manufacturer. F200 ECO – The OPTIMUM Premium CNC Milling Machine with Siemens SINUMERIK 828D Control stands out for its performance, speed, precision, and long service life. Model: F200 ECO Control: SIEMENS SINUMERIK 828D PPU271.5 Milling Spindle: Belt Drive Machine Specifications Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 operation: 9 kW Drive motor torque S1 operation: 57 Nm Drive motor S6 30% operation: 17.1 kW Drive motor torque S6 30% operation: 118 Nm Spindle taper: BT40 Hjdpfxoymd Nbo Apdjw Coolant System Coolant pump power: 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Flushing pump Milling Precision Repeatability: 0.008 mm Positioning accuracy: 0.004 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (adjacent stations empty): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time, tool-to-tool: 2.5 seconds Travel X-axis: 850 mm Y-axis: 500 mm Z-axis: 550 mm Feed Drive Rapid feed, X-/Y-/Z-axis: 48 / 48 / 48 m/min Motor Torque X / Y / Z-axis: 16 Nm / 16 Nm / 20 Nm Feed Forces X / Y / Z-axis: 5,34 kN / 5,34 kN / 6,68 kN Speed Range Spindle speed*: 10,000 rpm Pneumatics Compressed air: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Spindle-to-table distance: 100 – 650 mm Table length × width: 1000 × 500 mm T-slot size / number / spacing: 18 mm / 5 / 100 mm Maximum load capacity: 500 kg Dimensions Length × width × height: 2,400 × 2,355 × 2,860 mm Total weight: 5,500 kg Equipment • Linear guides with ball screw for high rapid traverse speeds on all axes • Telescopic guideway covers on all three axes • Automatic lubrication • Portable electronic handwheel with enabling switch and emergency stop • RJ45 port and 230 V power outlet • Machine lamp in work area • Cleaning blow gun • Ball screws and linear guides from THK • Chip flushing system • Cooling at the spindle head (machining area) • Control cabinet • Arm-type tool changer • SW24 • CE compliant *More options available

Condition: good (used), Year of construction: 1990, HEIDENHAIN TNC-355 Hedpfxofg Ep Dj Apdjw Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories MARCELS MASCHINEN CH