Used tool milling machines - NC/CNC over 1000mm X-axis travel for sale (13)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,680 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, total height: 2,500 mm, total length: 2,700 mm, total width: 2,000 mm, working range: 1,680 mm, spindle motor power: 2,200 W, number of clamping sleeves: 12, Equipment: documentation/manual, 4-axis CNC machining center ISEL Sonderanlage - 06/2007 Ncjdpfx Aeycqu Njd Nel X1680 Y1000 Z600 – spindle 2.2 kW / 15,000 rpm – table 1660×1750 mm – 4th rotary axis Ø1660 L1750 mm – PC + MAYKA (installed on integrated PC) Ready for use, operational and can be demonstrated under power. Location: Industrial zone 06510 CARROS CNC machining center / milling machine, 4-axis, brand ISEL (isel automation – Germany). Special custom-built machine “Sonderanlage” (manufacturer’s plate), year 06/2007, Serial No. 293215/1, CE marked. Primarily used for precision foam machining, but this is a true CNC machining center: the range of materials depends mainly on tooling and process parameters. Dimensions: length 2.70 m - width 2 m - height 2.50 m. Operating hours counter not accessible in this configuration. Mayka installed and fully functional on the PC. Last tested 13/01/2026: all axis movements OK. Can be inspected and tested onsite: axis travel and start-up possible. Chip extraction included but non-operational (requires servicing). Operating hours: not available (counter inaccessible) Travel: X 1680 mm / Y 1000 mm / Z 600 mm Usable table: 1660 × 1750 mm (T-slots / clamping) 4th rotary axis included: Ø 1660 mm, length 1750 mm Drive: ball screws + belts, linear rail guides Drives: servo motors Spindle ISEL F8LI2S2/-8-043: 2.2 kW, 15,000 rpm, manual tool change Tooling included: 1 tool holder + 11 collets (spindle-specific system) + clamping nut Cooling: spindle air cooling + chiller present Safety: fully guarded machine + emergency stop Noise: approx. 50 dB during operation, 65 dB during Y-axis movement Power supply: 400V three-phase, 16A – compressed air not required Lubrication: none Control / PC / Software Electrical cabinet included Integrated PC + monitor + keyboard (Windows 7) MAYKA installed and functional on integrated PC (no separate dongle/USB key required) Maintenance / service history • March 2019: PC replaced • March 2019: all drive belts replaced • March 2019: iCCE10 CANopen PCIe card (1 channel) replaced • Last test: 13/01/2026 – all movements tested and operational Brand: ISEL Model: Sonderanlage Year: 06/2007 Serial no.: 293215/1 Axes: 4 (with 4th rotary axis) Travel: 1680 × 1000 × 600 mm Table: 1660 × 1750 mm Spindle: 2.2 kW – 15,000 rpm Supply: 400V three-phase – 16A PC/software: integrated PC + MAYKA

Condition: ready for operation (used), Year of construction: 2017, operating hours: 135 h, functionality: fully functional, machine/vehicle number: 6693371/1, travel distance X-axis: 1,480 mm, travel distance Y-axis: 1,090 mm, travel distance Z-axis: 617 mm, total height: 2,320 mm, total length: 2,800 mm, total width: 2,000 mm, working range: 1,480 mm, spindle motor power: 3,600 W, tool diameter: 32 mm, Equipment: documentation/manual, 4-Axis CNC Machining Center ISEL FlatCom XL142/112 EC-Servo – 10/2017 X1480 Y1090 Z617 – 3.6 kW spindle / 17,750 rpm (ER32) – 135.53 operating hours – 4th axis Ø600 L1000 – PC + remote control Ready for use, can be seen powered on Location: Industrial zone 06510 CARROS Machining center / 4-axis CNC milling machine ISEL FlatCom (iselgermany), EC-Servo configuration, year 10/2017, Serial no.: 669371/1, CE marked. Dimensions: length 2.80m – width 2.00m – height 2.32m Machine in “as new” condition, very little use, fully tested. Hours: 135.53 operating hours 144.04 powered-on hours Axes: 4 axes, with 4th rotary axis (effective diameter 600 mm, length 1000 mm) Travel: X 1480 mm / Y 1090 mm / Z 617 mm (on 4th axis) Usable table: 1540 × 1500 mm – T-slot table Transmission: ball screws, linear guideways Drives: EC-Servo motors SPINDLE / TOOLING ISEL VKH75/26-75T spindle: 3.6 kW, 17,750 rpm ER32 collet Pre-equipped for pneumatic tool changer (ATC): tool magazine not included, but can be added (arrange through supplier) 2 tool holders (1 mounted on the machine) Tool length probe included Cooling: spindle air + included chiller Control / PC / Software ISEL control + REMOTE software License included and transferable No dongle/keys/codes required PC + monitor + keyboard included (Windows 7) WORKSHOP / SAFETY Power supply: 400V three-phase, 16 A Compressed air required: yes, 8 bar (for pneumatic components) Dust extraction: not included Lubrication: none Enclosure with emergency stop Noise level: approx. 50 dB max Dust extraction port/connection prepared: no Ncedpjycqm Ejfx Ad Nel Condition / Testing Condition: “as new”, no known issues (play, errors, sensors: nothing to report) Last tested: 13/01/2026 All movements tested OK Included Machine + electrical cabinet PC/monitor/keyboard Software & license 4th rotary axis 2 tool holders + collets + clamping kit (Allen keys) Various clamping accessories + tool length probe Set of end mills / drills included (see photos) Brand: ISEL Model: FlatCom XL142/112 EC-Servo Year: 10/2017 Serial number: 669371/1 Axes: 4 + 4th rotary axis (Ø 600 / L 1000) Travels: 1480 × 1090 × 617 mm Table: 1540 × 1500 mm, T-slots Spindle: 3.6 kW – 17,750 rpm – ER32 Pre-equipped for pneumatic tool changer (ATC), magazine not included Power: 400V three-phase – 16A / Air: 8 bar Hours: 135.53 operating / 144.04 powered-on

Condition: used, Year of construction: 1989, Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Nodpfxex Ekafj Ad Nscl Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Nedpfxex Tiq Ss Ad Necl Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2001, functionality: fully functional, feed length X-axis: 2,700 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,000 mm, travel distance X-axis: 2,700 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 25,000 rpm, spindle speed (min.): 100 rpm, rotational speed (max.): 25,000 rpm, rotational speed (min.): 100 rpm, Equipment: rotational speed infinitely variable, 5-AXIS MACHINING CENTER Nodpfx Adox Ryxhs Nscl BI-ROTARY HEAD AUTOMATIC TOOL CHANGER FOR 20 TOOLS, HSK 63

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, feed length X-axis: 1,300 mm, feed length Y-axis: 900 mm, feed length Z-axis: 700 mm, travel distance X-axis: 1,300 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 100 rpm, 3-axis machining center 30 tools ISO 40 Ncedox Rx U Ispfx Ad Nol CNC SELCA 4045PD

Condition: ready for operation (used), Year of construction: 1998, All detailed information is in the photos. For further details, please contact us. Nedpfx Adew Dt Tls Nocl

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Nodpfxsxftqdj Ad Necl Prototrak SMX CNC Control,

Condition: good (used), Year of construction: 1992, Travel X/Y/Z: 1000/500/500 mm Control: Heidenhain TNC 415 B Spindle: SK 40 Speed range: 0 - 5000 rpm Coolant device Universal milling head Can be swiveled and manually indexed via scale, can be swiveled away for horizontal machining Njdotmtvlepfx Ad Njcl

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Ncsdpfexxlr Tex Ad Nsl Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Depth 2500 mm Total height 4000 mm Weight: approx 9 T

Condition: excellent (used), Control unit new Spindle replaced 400 hours ago X axis 1200mm Nodpfx Aet Sxirsd Nscl Y axis 600mm Z axis 850mm Tool changer 24 times 4 and 5 axis available maximum 80 operating hours Year of construction 2001 Speed 9000 Internal cooling 32Bar Accessories 3D infrared probe various milling cutters Clamping device 250 SK 40 holders Tool presetting device (measuring system)

Condition: used, Year of construction: 1991, x-travel 1000 mm y-travel 500 mm z-travel 700 mm table surface area 1250 x 700 mm spindle taper ISO 50 spindle turning speed range 20 - 3200 U/min quill stroke 100 mm semi-automatic operated Phillips 432 Number of working hours 62.340 h main drive motor 22 kW total power requirement 27 KVA weight of the machine ca. 7,7 t base area 3,8 x 4,1 x 2,4 mm accessories: hydr. Schraubstock X axis, longitudinal 1,000 mm Ncjdpjtv Ii Isfx Ad Nsl Y axis, vertical 500 mm Z axis, cross 700 mm Min./max. distance from vertical spindle to table top 138 / 600 mm Overhang max. approx. 800 mm Spindle taper SK 50 with inner cooling Spindle speeds (infinitely variable in 2 steps) 20 - 3,200 rpm Feed motion YXZ 1 - 3,000 mm/min Rapid traverse XZ 6,000 mm/min, Y = 5,000 mm/min. Rotary axis as 4th axis with housing of the working area

Year of construction: 1989, condition: excellent (used), - 30T – soundproofing booth - working area 1250x2000 mm. repositionable – turret with 40 stations, 2 of which are indexed Nedpjnr R Hkjfx Ad Nscl – CNC and Fanuc electronics – wide set of punches and dies – additional sheet metal sliding surface with flap - compliance with safety regulations with relative sworn appraisal machine installed, in operation until 2019 - availability for any test - use and maintenance book.