Used Bed Type Milling Machine for sale (87,391)

Condition: used, Year of construction: 1988, Bed milling machine Manufacturer: Correa Type: A16 Year of manufacture: 1988 Control system: HEIDENHAIN TNC415 Goljzt U T Aehccqrobr Travel distances X/Y/Z: 1,800 x 800 x 800 mm Clamping surface: 2,000 x 630 mm Workpiece weight: 3,000 kg Operating hours: 12,103 Power: 19 kW Spindle type: ISO 50 Dimensions L/W/H: 4,886 x 2,720 x 2,500 mm Machine weight: 7,500 kg 13826

Condition: used, Year of construction: 1988, Bed milling machine Manufacturer: Correa Type: A10 Year of construction: 1988 Control system: HEIDENHAIN TNC 355 Travel distances X/Y/Z: 1,300 x 630 x 630 mm Clamping surface: 1,700 x 630 mm Gbolozt U R Ijhccqrjr Workpiece weight: 3,000 kg Operating hours: 25,845 Power: 19 kW Spindle type: ISO 40 Dimensions L/W/H: 3,870 × 2,630 × 2,200 mm Machine weight: 6,800 kg

Condition: used, Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm Golezrpnxehccqrsbr z-travel 1500 mm table-size 3200 x 1100 mm control TNC 430 B spindle turning speed range 60 - 4000 U/min spindle taper ISO 50 feeds mm/min table load 10 t milling drive 24 kW Center of spindle to wall or column 1229 mm total power requirement 50 kW weight of the machine ca. 22 t dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Universal milling head is automatically swivable and turnable in 1,5° steps. Machine has a 20 position ATC, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and a mist cooling arrangement. Machine in program for 25.616 hours.

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Geloxukppehccqrebr Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: used, Year of construction: 2002, x-travel 3000 mm y-travel 1600 mm z-travel 1500 mm table-size (2x) 2000 x 2000 mm control TNC 430 B spindle turning speed range 60 - 3600 U/min spindle taper ISO 50 feeds mm/min table load 10 t milling drive 28 kW total power requirement 48 kW weight of the machine ca. 47 t dimensions of the machine ca. 6,5 x 3 x 3 m control: Heidenhain TNC 430 B digital. Machine has 6 axes controled, X/Y/Z, C- Gbslhccezrpnreqrjr axe table rotation and A/B axes for universal head. Machine has a 40 position ATC, cooling through spindle, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and two pallets in the pallet changer. Machine in program 22.347 hours.

Condition: good (used), functionality: fully functional, Universal milling machine Deckel FP2Lb, directly from the seller Goljztav Aehccqrebr Technical data: >> Machine no. 0793 >> Fixed angular table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 8 to 400 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: approx. 2.2 kW >> Travel ranges X/Y/Z: 800/300/400 mm (Y travel can be extended by another 200 mm) >> Equipment: Vertical & horizontal spindle >> Extendable vertical quill and horizontal quill - SK-40 >> Collet system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> Central lubrication >> Modification of the control cabinet About the machine: Offered is a used universal milling machine Deckel FP2Lb in working condition. The machine comes directly from the seller and is sold as is. The vertical head can be moved by 200 mm to enable an even larger working area. A central pump ensures the lubrication of the various axes. A special feature of this machine type is its basic design; it is a machine with an inclined table bed. The movement processes are assigned to the work spindle and thus to the tool. Different workpiece weights do not affect the axis movements. Take advantage of the opportunity to inspect and test the machine on site while it is powered up. The Deckel is sold as a source of spare parts, without inspection and without warranty.

Condition: excellent (used), Year of construction: 2003, Bed milling machine, lightly used with approximately 4000 hours. XYZ: 2000 x 1000 x 1000 mm Heidenhain: 530 TNC with HR 410 handwheel Spindle: 2.5 x 2.5 degree double swivel, 4000 RPM, ISO 50 Options: Temperature cooler Coolant chiller Linear scale in Y-axis IKZ 15 bar External cooling with 500 l ATC with SK 50 CNC rotary table with 600 mm diameter ZF gearbox Renishaw MP 10 Gelhccqszt Sv Uerebr Chip conveyor (longitudinal) Foot pedal Coolant control cabinet

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Gelhccszru Haoqrjbr Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: used, Year of construction: 2003, operating hours: 40,009 h, functionality: fully functional, machine/vehicle number: 211, Technical Specifications (CME FS-2) Working Table: Table clamping surface: 2000 x 850 mm Maximum permissible table load: 3500 kg T-slots: 1 x H-7 / 5 x H-10 (slot spacing: 100 mm) Travels and Feeds: X-axis travel: 1800 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm Working feed rate: 5 - 5000 mm/min Rapid traverse: 20,000 mm/min Golhccqsztrt Hersbr Spindle and Drive: Spindle motor power: 22 kW Spindle taper: ISO-50 / DIN 69871 Spindle speed range: 50 - 4000 rpm Accuracy and Construction: Positioning accuracy (3 axes): +/- 0.005 mm Repeatability (3 axes): +/- 0.005 mm Ball screws (X, Y, Z): diameter 50 x pitch 10 mm Total machine weight: 13,000 kg (13 tons) Auxiliary Drive Motors: Hydraulic motor power: 1.1 kW Lubrication motor power: 0.4 kW Coolant pump motor power: 0.3 kW

Condition: used, Brand and Model: CORREA CF 22/25 Cnc: HEIDENHAIN TNC 426 Gbslhcjzq Rzqocqror Type: BED TYPE Table dimensions: 2500x700 mm Max allowed weight on table: 4000 kgs Traverses (X,Z,Y): 2500x800x800 mm Milling head model: U22 manual Spindle cone: ISO 50 Speed range: 4000 rpm Power: 22 kw Feedrates: 5-5000 mm/min Rapid traverses (X,Y,Z): 12000 mm/min Machine weight: 9500 kgs Machine dimensions: 6400x3345x2800 mm Machine equipped with: -Optical encoders on the X,Y,Z axes – Electronic wheel – Hydraulic cone clamping pedal

Condition: used, Year of construction: 1999, Technical details: x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm Gbjlhov Rdzboccqrer milling spindle motor: 35/30 kW spindle taper ISO: 50 spindle turning speed range: 24 - 3000 U/min table surface area: 1350 x 1550 mm table load: 6 t feed speeds: 10 - 3000 mm/min rapid speed: 10 m/min total power requirement: 48 kW weight of the machine ca.: 24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head diverses accessories *

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 2545, Table: 1350 x 320 Working range: X = 850 Y = 420 Z = 400 Gelhcceztb E Eoqrjbr Maximum workpiece weight: 500 kg.

Condition: used, Year of construction: 2001, functionality: fully functional, table width: 750 mm, table length: 2,200 mm, overall weight: 10,800 kg, spindle motor power: 19,000 W, CNC SELCA S3045 P TABLE Table size: 2,200 x 750 mm T-slots: 6 x 18 x 130 mm Maximum permissible load with standard support system: 3,500 kg TRAVELS Longitudinal: 2,000 mm Transverse: 800 mm Vertical: 1,250 mm Spindle nose – table surface distance: 970 mm SPINDLE AC motor power: 25 HP (19 kW) Spindle taper: ISO 50 Constant torque speed: rpm 0 - 195 Constant power speed: rpm 195-4,000 Maximum torque: 930 Nm Universal head with ISO 50 taper and automatic rotation of both axes with positioning every 2.5°. FEEDS Working feeds: mm/min 0 – 4,000 Rapid traverse of Y/Z/X axes: mm/min 15,000 Working thrust of Y/Z/X axes: DaN 2,000 MOTORS AC motors for X/Y/Z axis feed: Nm 18, 18, 18 Coolant pump: 2 HP (1.5 kW) Hydraulic unit: 1.3 HP (1 kW) Guide lubrication: 0.3 HP (0.2 kW) Coolant oil pumps: 1.3 HP (1 kW) Gbslszr U Ttjhccqrer Refrigeration unit: 5.5 HP (4 kW) TOTAL MAXIMUM INSTALLED POWER: 55 HP (40 kW) APPROXIMATE WEIGHT: 10,800 kg YEAR OF MANUFACTURE: 2001

Condition: new, Year of construction: 2026, Power supply: 400 V Motor power: 5.5 kW Spindle speed: 50 – 1520 rpm Table dimensions: 1700 × 400 mm Maximum table load: 1000 kg Table movement range: 1300 x 400 x 600 mm Gbslhezr I Speccqrsr Maximum table load: 1000 kg Machine type: Console milling machine Design: Heavy Line Application: Metal machining Machine dimensions (L × W × H): 2245 × 2100 × 2000 mm Weight: 3700 kg

Condition: excellent (used), Year of construction: 2018, overall weight: 320 kg, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, CNC Bed-Type Milling Machine Correa Anayak - HVM BIRA Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Gslhccezcpg Doqrjbr Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Length:1200mm Width:800mm Height:700mm Weight:320kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Gbolhozrd Tvsccqrjr

Condition: used, Year of construction: 1970, x-travel 3000 mm y-travel 1350 mm z-travel 1400 mm spindle taper ISO 50 turning speeds 22-1400 U/min Rotary table 800x600 mm Table dimensions 2500x1200 mm Feed 5-3000 mm/min ball screw The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Gbjlhccqsyqu Rqjror About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2000, x-travel 3500 mm y-travel 1600 mm z-travel 1200 mm spindle turning speed range 250 - 3000 U/min Gbelhcceykvayoqrjr tool taper ISO SK-50 tool change unit 40 rapid traverse: 15000 mm/min. feed 5000 mm/min table dimension - longitudinal 3860 mm table dimension - cross 1000 mm control HEIDENHAIN TNCi530 weight of the machine ca. 24 t dimensions of the machine ca. 8000 x 5000 x 4000 m

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, LAGUN BM 3 Bed Milling Machine – available for short-term delivery The LAGUN BM 3 is a highly stable bed milling machine for heavy-duty and precision machining. Ideal for single-piece production as well as series production with the highest requirements for stiffness, accuracy and reliability – all without complex foundation work. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Lease purchase / financing possible ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics and decades of experience in the construction of bed milling machines. The machines impress with high reliability, ease of maintenance and economical operation. Technical equipment: Control: HEIDENHAIN TNC 640 CNC path control HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 24-position drum magazine with dual gripper Chip disposal: Double-hinge belt conveyor (front and rear) Preparation: Preparation for 4th axis (rotary table optional) Enclosure: Gbolhjh Ekrtoccqror Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and create an individual offer.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 12,000 kg, table length: 4,100 mm, workpiece weight (max.): 12,000 kg, overall weight: 26,500 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, LAGUN BM 4 Bed Milling Machine – available for short-term delivery The LAGUN BM 4 is a highly stable bed milling machine for heavy-duty and precision machining. Ideal for single-part production as well as series production with the highest demands on rigidity, accuracy, and reliability – and all without complex foundation work. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Lease purchase / financing possible ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in the construction of bed milling machines. The machines impress with their high reliability, ease of maintenance, and economical operation. Technical equipment: Control system: HEIDENHAIN TNC 640 control system HEIDENHAIN TFT screen 19" HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 24-position drum magazine with double gripper Chip disposal: Double-hinge belt conveyor (front and rear) Preparation: Preparation for 4th axis (rotary table optional) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Goloh Ekrzshccqrjbr Contact us – we will be happy to advise you and prepare an individual offer.

Condition: like new (used), Year of construction: 2018, operating hours: 500 h, functionality: fully functional, LAGUN BM4RT Bed Milling Machine Manufacturer: Lagun Gbslhszmpydoccqror Type: BM4RT Year of manufacture: 2018 Condition: operational, used, like new Operating hours: 1650 h Spindle hours: 438 h Control system: Heidenhain iTNC 640 Video available. Further information upon request.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 35 m/min, spindle speed (max.): 5,000 rpm, table width: 2,000 mm, table load: 15,000 kg, table length: 2,000 mm, CNC HEIDENHAIN ITNC530 HSCI ANNO 2016 Longitudinal X-travel: 6000 mm Cross Y-travel: 1250 mm Vertical Z-travel: 2000 mm Rapid feedrates: 35 mt./min. Semi-automatic accessory change Spindle motor power: 34 kW Constant power speed range: 400 – 5000 rpm Maximum torque: 830 Nm Maximum feed rate: 35,000 mm/min Acceleration: 1.5 m/s² Maximum spindle speed: 5000 rpm Hydrostatic rotary-translating table TRT15 Table size: 2000 × 2000 mm (15.000 KG) Golhcjyugbiscqrjbr Universal bi-rotary head with thousandth-degree positioning Taper: BT 50 Double cradle for loading/unloading two milling heads, with dedicated management software Chain-type tool magazine, 40 positions, ISO 50 High-pressure coolant system, external/internal through the tool, with paper filter External pressure: 4 bar Internal pressure: 20 bar Through-tool compressed air coolant Chip conveyor with right-side discharge Remote control panel

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, 3-axis-Bed Type Milling Machine - Universal | Brand: AUERBACH | Type: FBE 2000 Year of manufacture: 2002, complete overhauled by the manufacturer in 2015 The complete overhaul in 2015 included, amongst other things, the disassembly of all axes, cleaning, reassembly and recommissioning. The machine can be inspected under power by appointment. Condition: Very well maintained / ready for use. Operating hours (July 13, 2026): approx. 40.000 h Last maintenance carried out in 2025, at 36.250 operating hours. TECHNICAL SPECIFICATIONS: Travels: - X-axis: 2.000 mm - Y-axis: 1.000 mm - Z-axis: 900 mm Dimensions / Weight: Dimensions W/D/H: 5,5 (7,15 including chip conveyor) x 4,1 x 2,7 m Machine weight: 13 tons EQUIPMENT: - CNC control system: Heidenhain TNC 426 - Universal milling head (mechanically swivelling), Brand: SEMPUCO, KFU-2/45/021 - Spindle speed: 3.500 rpm - Tool magazine: 46 positions - Tool holder: SK 50 - Electronic handwheel - 3D infrared measuring probe, brand: m&h Hexagon - Table load: 6 tons - 5 x 22 T-slots in the milling table - Chip conveyor with coolant system - Large air-conditioning unit control cabinet - Drive motor for the Z-axis (spare part) - Documentation in German No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale - Gslszmn Ruohccqrobr

Condition: used, Year of construction: 1996, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, X-AXIS TRAVEL: 2500 MM Y-AXIS TRAVEL: 1000 MM Z-AXIS TRAVEL: 1000 MM FIXED TABLE: 1600 X 800 MM - MAXIMUM LOAD: 5000 KG ROTARY TABLE: 750 X 750 MM - MAXIMUM LOAD: 5000 KG RAPID FEED AXES: X, Y, Z: 10,000 MM/MIN SPINDLE TAPER: ISO 50 Gjlhswz H Hmsccqrsbr SPINDLE SPEED: 50 - 3000 RPM SPINDLE MOTOR POWER: 16.5 KW NO. 2 SPEED RANGE CNC HEIDENHAIN TNC 407 AUTOMATIC HEAD HORIZONTAL - VERTICAL AUTOMATIC TOOL CHANGER

Condition: excellent (used), Year of construction: 2003, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, spindle speed (max.): 4,000 rpm, table width: 1,200 mm, table load: 4,000 kg, table length: 3,860 mm, mount diameter: 50 mm, total height: 3,640 mm, total width: 4,500 mm, total length: 8,900 mm, rotational speed (max.): 4,000 rpm, workpiece weight (max.): 4,000 kg, overall weight: 24,000 kg, FIBRO indexing rotary table, 800 mm Enclosed, covered machine with doors for easy access Indexing head: 2.5 x 2.5 degrees Automatic lubrication Double chain chip conveyor Machine owned by one previous user, in working condition X-axis: 3500 mm Y-axis: 1200 mm Z-axis: 1400 mm Gjlhccszl Afdsqrebr Table length: 3860 mm Table width: 1200 mm Table load capacity: 4000 Table diameter: 800 mm Feed rate, X-axis: 20,000 mm/min Feed rate, Y-axis: 20,000 mm/min Feed rate, Z-axis: 20,000 mm/min Tool interface: 50 ISO/BT/MK Spindle power: 30 kW Spindle speed: 4000 rpm Tool changer: 30 Number of controlled axes: 3 + 1 Chip conveyor: Yes Coolant system: Yes Length: 8900 mm Width: 4500 mm Height: 3640 mm Weight: 24,000 kg