Copy milling machines for sale
Your location was not identified (Edit)
ready for operation (used)
Horizontal cutting range using a stop 230 x 90 mm
Horizontal cutting range using a copy template 230 x 90 mm
Spindle speed 12,000 rpm
Ohaen
Clamping range for profiles 180 x 130 mm
Travel 110 mm
Power supply 230/400 V, 3~, 50 Hz
Power output 0.74 kW more
used
x-travel 510 mm
y-travel 450 mm
table-size 250 x 700 mm
model table 430 x 600 mm
drive for spindle 1,5 / 1,8 kw
tool taper MK II bis 20 mm
turning speed range 80 - 10 000 U/min
table size towing table 400 x 400 mm
working area 510 x 450 mm
Beocx3ooxq
weight of the machine ca. 1400 kg
dimensions of the machine ca. 1,6 x 1,4 x 1,95 m
Electric 380 Volt
Machinelight
Towing table. Yearof construction is not known.
Machine dealer with own stock of 2500 m². more
1996
good condition (used)
Semi-automatic cylinder key milling machine from Börkey
Used, very good condition.
For cutting cylinder, cross and vehicle keys up to 100 mm in length.
Semi-automatic, gear system with 4-fold clamping system.
Börkey 396 EUROLINE
Bjvvaocnuj
- Suitable for the following key types:
Vehicle key, cross key, cylinder key
-Machine type for cutting
- Semi-automatic control
- Weight 29 kg more
Universal engraving and carving Fabr. COVER type GK 21
Masch. # 56-974
Technical data:
Worktable clamping surface 200 x 350 mm
Gr. Distance from spindle to clamping surface 390 mm
Longitudinal movement of table 160 mm
Transverse movement of the table 300 mm
Clearance height spindle to top of stand 290 mm
maximum workpiece weights up to 250 kg
Template table clamping surface 315 x 450 mm
Gr. Removal of pantograph arm clamping surface 290 mm
rotating 360°
Weight 620 kg
Drive motor 0,37 / 0,55 kW
... more
pattern table size: 300 x 500 mm
working table size: 200 x 350 mm
9ybp8yhbg
working area longitudinal: 160 mm
working area cross: 300 mm
spindle turning speed range: 475 - 9500 rpm
milling proportion: 1 : 10/1 : 1,5 mm
spindle drive: 0,37/0,55 kW
space needed: 1200 x 1100 x 1470 mm
weight: 620 kg more
used
OZCELIK COPY MILLING MACHINE
TYPE GALAXY I
- 2 Pneumatic clamps
- Materiaala investment
- Documentation
- 400V
DUTCHMACH
Metalworking machinery
ENSCHEDE - NETHERLANDS
Bh7ctm2gns
(3 km from the German border) more
The Pemac 03PLA is a semi-automatic 3-head high speed copy router (long model) which permits executing machinings (slots, holes, 3-point lock cylinders) on aluminum and PVC profiles without unclamping the profile (in 1 clamping). The vertical travel of the spindle occurs semi-automatic: the operator can lower the spindle, by activating 2 separate buttons, and thus lowering the spindle automatically till the desired height. This action gives a stable milling-operation.
This model is suitable for... more
Nr. 0534:
1 gebr. Universal Kopierfraesmaschine
Fabr. DECKEL, Typ KF-2
Bauj. 1989 - sehr guter Originalzustand
Arb.-Ber.: 510 x 450 mm
Antriebsleistung: 2 kW
Zubehoer:
Schlepptisch, Schlichtspindel
Spannzangen + Fraesdorne
Sonstiges:
Platzbedarf 2,6 x 2,6 m;
Kwpd7
Gewicht 1700 kg
Vorfuehrung und Einweisung am Lager nach Absprache moeglich more
pattern table size: 430 x 600 mm
working table size: 250 x 700 mm
working area longitudinal: 322 mm
working area cross: 200 mm
spindle turning speed range: 80 - 20000 rpm
Hgnysb7
milling proportion: - mm
spindle drive: 380 V, 1,5/1,7 kW
space needed: 2000 x 2000 x 2000 mm
weight: 1650 kg more
The Pemac 03PL is a 3-head high speed copy-router on a long base which permits executing machinings (slots, holes, 3-point lock cylinders) on aluminium and PVC profiles without unclamping the profile (in 1 clamping). This model is suitable for either free routing, both lengthwise or crosswise, or through a template with copy-pins. The machine is equipped with four pneumatic clamps that are adjustable in height and width. This ensures constant clamping of the profiles, which largely avoids vibrat... more
pattern table size: 240 x 260 mm
working table size: 240 x 260 mm
2iqjxeor
space needed: 600 x 900 x 950 mm
weight: 150 kg more
The Pemac 01P is a 1-head high-speed copy router, designed for aluminium and plastic profiles. The machine is equipped with two pneumatic clamps that can be adjusted in height and width. This ensures constant clamping of the profiles, which largely eliminates vibration. The machine also has 2 pneumatic sensors and 5 adjustable mechanical stops. Combined with the graduated linear guides, this ensures optimum working flexibility. The supplied copying template is custom-made to fit the requirements... more
This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
New Machineseeker.com TV commercial with Michael van Gerwen
Photo gallery: the 10 strongest forklift trucks in the world
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
Sell now on Machineseeker! Over 160,000 inquiries per month
Didn't find what you were looking for? Please contact our partners for this category :
Dealer for Milling machines
Dealer for Milling machines
