Milling mach.-univ.conv. 0-399mm x-tr. for sale
Your location was not identified (Edit)
x-travel 500 mm
y-travel 320 mm
z-travel 370 mm
2rgpfi
control TNC 310 HEIDENHAIN
spindle taper ISO ISO 40 DIN 2080
spindle turning speed range 63 - 3150 U/min
table-size 800 x 320 mm
table load 400 kg
feeds -stepless- 10 - 1000 mm/min
rapid traverse 2 m/min
power capacity 3 kW
quill stroke 60 mm
coolant
voltage 400 V
total power requirement 5,87 kW
weight of the machine ca. 2,2 t
dimensions of the machine ca. 1,68 x 1,70 x 1,89 m
Milling Head pivotable +/- 90°
electronic hand wheel more
DESCRIPTION
Control: Fanuc 21-MSpindle speed: Max spindle RPM 15.000CNC milling center Chiron FZ08W
Good condition,
DESCRIPTION
Manufacturer CHIRON
Type FZ 08 W
Year of manufacture 2007
Control Fanuc Series 21M
Max spindle RPM 15.000
X = 300 mm
Y = 250 mm
Z = 250 mm
Photos to follow !!!!
Hpgki7rlu more
2016
as good as new (ex-display)
Technical data
Electrical connection 400 V / 3 Ph ~50 Hz
Total connected load 4 kW
Drive motor 2.2 kW
Motor rapid traverse/feed 0.375 kW
Motor coolant pump 95 W
Bl0dyx7zxi
Drilling and milling performance
Drilling capacity steel (S235JR) Ø 30 mm
Continuous drilling capacity steel (S235JR) Ø 26 mm
Cutter head size max. Ø 100 mm
Shaft burr size max. Ø 25 mm
Screw drive
Spindle speeds 50 - 1,890 min-1
Gear stages 12 stages
Stem mounting ISO 40 DIN 2080
Vertical
quill stroke 120 mm
Tightening rod M1... more
3-axis active digital display HEIDENHAIN TNC 113
Year of construction: 1987
Stroke: X 300 Y 160 Z 340
Speed range: 40-2000 rpm with the following accessories:
Solid angle table 600 mm x 210 mm clamping surface
Hydraulic vise jaw width 115 mm
Sliding vertical milling head
Butt head
Telescopic drilling tailstock
Thrust bearing for horizontal milling
Continuous feed via potentiometer
Tool Cabinet
15 PCs. dollies short, 2 STK. dollies long
Machine lamp
Automatic central lubrication pump
Bdvkfqoq3c
... more
x-travel 300 mm
y-travel 200 mm
z-travel 350 mm
table-size 700 x 200 mm
spindle taper ISO 40
Y3aiml
turning speed range - horizontal 150 - 1660 U/min
turning speed range - vertical 110 - 1230 U/min
quill stroke 120 mm
spindle drive 3,0 kW
weight of the machine ca. 1,15 t
dimensions of the machine ca. 1,31 x 1,38 x 1,65 m more
x-travel 300 mm
y-travel 150 mm
z-travel 340 mm
feed - longitudinal/cross 10 - 500 mm/min
Bjbeldzdu3
spindle turning speed range 40 - 2000 U/min
table-size 600 x 210 mm
tool taper SK 40
total power requirement 1,0 / 1,4 kW
weight of the machine ca. 0,6 t
dimensions of the machine ca. 1,0 x 1,1 x 1,6 m more
Tool milling machine Deckel FP 1 2-axes active
Year of construction: 1986
with 2-axis digital readout make Heidenhain TNC 113
Feeds in X and Z axis
dividing head
X - axis 300 mm
Y - axis 160 mm
Z - axis 340 mm
Speeds from 40 - 2000 rpm.
Spindle holder SK 40
Weight approx. 800 kg
Important: Rigid angle table as good as new
Odj9p
the machine comes from a training workshop more
Dear customer,
currently we offer you a universal milling machine for model and mould making of the brand Zimmermann. Here the technical data of the machine:
Work table: 630 x 490 mm
support table: 490 x 400 mm
circular movement: 360°.
Swivel: 2 x 90°
clamping groove: 14 x 25 mm
Power: 1,1 kW
Csuzsz0k
Speeds: 560 - 14,000 rpm
tool holder: ISO30 / SK30
incl. base cabinet full of accessories
incl. vernier stop
Space requirement: 1,400 x 1,520 x 1,470 mm
Weight: 680 kg
VAT is shown separately on th... more
x-travel 300 mm
F7mcvccwi
y-travel 150 mm
z-travel 340 mm
turning speeds 60 - 1900 U/min
table: 195 x 600 mm
spindle taper 40 SK
total power requirement 1,5 kW
weight of the machine ca. 700 kg.
range L-W-H 0,8 x 1,1 x 1,7 m more
serial number 21011116
Bjdmhima8c
x-travel 300 mm
y-travel 150 mm
z-travel 250 mm
digital ja
weight of the machine ca. 1,3 t more
Travels: X = 310, Y = 160, Z = 320 mm.
Spindle holder: SK 40 with S 20 x 2 tightening thread.
Spindle speed: 40 - 2000 rpm.
Universal swivel milling head with drilling sleeve.
Horizontal milling spindle with counter bearing.
Incl. angle table 200 x 600 mm,
Blew2qwifc
div. SK 40 direct collets, machine light,
Coolant system and documentation. Weight: approx. 700 kg.
The machine can be inspected and demonstrated under power by arrangement and is immediately available.
Please also note my further a... more
x-travel 26 mm
y-travel 160 mm
z-travel 60 mm
Control FANUC 0 iMD
U-axis 26 mm
V-axis 160 mm
w-axis 35 mm
feed 5000 mm/min
rapid traverse 16 m/min
bar material dia. 16 mm
total power requirement 10 kVA
weight of the machine ca. 1 t
dimensions of the machine ca. 2,4x0,65x1,6 m
central lubrication
Ultra compact bar milling machine
6 axes
The starting material is always a round or profile bar
Highest accuracy
only 2,000 operating hours
The machine is in very good conditon.
Typical workpiece... more
Tool milling machine Deckel FP 1 3-axes active
Year of construction: 1987
with 3-axis digital readout make Heidenhain TNC 113
Rigid angle table
X - axis 300 mm
Y - axis 160 mm
Z - axis 340 mm
Speeds from 40 - 2000 rpm.
Spindle holder SK 40
Weight approx. 800 kg
D8gtjwx
Accessories: Central lubrication, coolant system, separate switch cabinet, extendable quill.
the machine comes from a training workshop more
ELESTA x-y digital display
x-path 310 mm
y-path 170 mm
z-path 350 mm
Spindle mount ISO 40
Spindle speeds 40 - 2500 rpm
Table size 600 x 215 mm
Nzxed
Feed rates: 9 - 450 mm/min
Drive power 2,3 kW
quill stroke 70 mm
Coolant system
Operating voltage 380 V
Total power requirement 2.5 kW
Machine weight approx. 860 kg
Space requirement approx. 1.10 x 1.30 x 1.60 m more
x-travel 300 mm
y-travel 150 mm
Bcnbg3go
z-travel 340 mm
turning speeds 40 - 2.000 U/min
table: 195 x 600 mm
spindle taper 40 SK
total power requirement 1,5 kW
weight of the machine ca. 700 kg.
range L-W-H 0,8 x 1,1 x 1,7 m more
serial number 21011116
x-travel 300 mm
y-travel 150 mm
z-travel 250 mm
digital ja
table - swivable +/- ja
Bjdmhr7gsd
weight of the machine ca. 1,3 t more
3 axes digital display ACU-RITE III
Travels: X = 310, Y = 160, Z = 320 mm.
Spindle mount: SK 40 with M 16 tightening thread.
Spindle speed: 40 - 2000 rpm.
Universal swivel milling head and horizontal milling spindle.
Including angle table 200 x 600 mm,
Various tool holders, machine vice,
Machine light, Coolant system
and documentation. Weight: approx. 700 kg.
The machine can be inspected and demonstrated under power by arrangement and is immediately available.
M0vpg2i9
Please also note my furthe... more
Schaublin 22
Universal freesbank
Specificatie
Manufacturer Schaublin
Type 22
Bj. onb.
Besturing conv.
As-verplaatsing
X-as 330 mm
Y-as 400 mm
Z-as 475 mm
Variables for an entry in X, Z-as
Hoofdspil
Toerental 63 - 2800 Omw/min
Opname ISO 30
Oaepb
extras
Koelolie arrangement
Machinedocumentary
Div. reedschaphouders more
Universal tool milling machine
Make: DECKEL
Model: FP 1 Active
Year of construction: 1984 - workshop tested
Machine no.: 2101-0682
Hvm8bah
geometrical acceptance with test report
Accessories:
- 3-axis active Digital display
HEIDENHAIN with active function in X and Z axes
- Universal table 600 x 250 mm (T-slot: 12 mm)
- Vertical milling head SK 40 with tightening thread S 20 x 2
- Counterholder with bearing block
- Coolant system
- Central lubrication electrical
- Operating instructions
- used,... more
Type "COVER FP 1
Spindle mount ISO 40
table clamping area 600 x 215 mm
X-axis travel 310 mm
Y-axis 170 mm
Z-axis 340 mm
quill stroke 70 mm
Speed range 50 - 2500 rpm.
feed range 9 - 450 mm/min.
drive power 1,4 / 2,3 kW
Dimensions L x W x H 1050 x 1100 x 1350 mm
Weight 900 kg
Accessories / Special features:
- Fixed angle table
- Vertical and horizontal spindle
- Vertical milling head with quill, swivelling R + L
- Separate control cabinet
- Coolant system
Vrrrn3
- Chip tray
Siegfried Volz Mach... more
serial number 1796
x-travel 750 mm
y-travel 280 mm
z-travel 250 mm
digital Heidenhain
weight of the machine ca. 2,9 t
Bjdmh2omge
vice more
Travels: X = 310, Y = 180, Z = 310 mm.
Spindle holder: SK 40 with S 20 X 2 tightening thread
Spindle speed, vertical, 100 - 2000 rpm
Spindle speed, horizontal: 63 - 1250 rpm.
Feeds in the X and Z axis.
Including angle - box table, table surface: 300 x 620 mm,
Universal swivel milling head with drilling sleeve, quill stroke: 50 mm,
horizontal milling spindle with counter bearing and shaft,
Rotary table 250 mm, machine vice, drill chuck,
Tool cabinet with accessories, various tool holders,
Direct ... more
Maho MH 400 P milling machine with Heidenhain TNC 135 control. Machine is limited operational. With the linear measuring system the seals would have to be replaced due to coolant ingress. However, it can be used immediately for milling work without coolant. Machine is sold expressly as a spare part carrier, but no warranty or return. You will receive an invoice with MwsT.
F3zh77r more
Universal milling machine Deckel FP 1
with dividing head
x: 300 mm
y: 150 mm
z: 340 mm
Spindle speed 0 - 1900 rpm
Feed in the X and Y axis
Pinol displacement at the vertical milling head
fixed angle table approx. 600 x 200 mm
Coolant system
separate switch cabinet
Dimensions L/W/H approx. 1500/700/1500 mm
Weight approx. 900 kg
Year of construction approx. 60s
Accessories:
Bkw9ux09dk
* dividing head
* 3-jaw chuck
* Collets
no more documents available, until last run
technical data without guarant... more
FP 1
Tours top!
Oalvv
Scrape still available.
Fully functional
If you are interested there is also a video more
Deckel FP1 Actif toolroom milling machine in very good excelent condition.
Machine Nr.2102-3173.
Year of contruction 1986
Specifications:
- Machine speed: 40 - 2000 rpm
- Power feed X/Y/Z infinitely variable
- Rapid feed X/Y/Z
- X / Y / Z: 300/160/340 mm
- Spindle brake
- Spindle nose vertical and hor. SK40/M16
- Weight about 800 Kg
Accessories and equipment:
- 3-axis actif digital readout Heidenhain TNC113
- coolant system
- Central lubrication
- machine books.
Cij9nete
Off... more
Tool milling machine Deckel FP 1 3-axes active
Year of construction: 1987
with 3-axis digital readout make Heidenhain TNC 113
Rigid angle table
X - axis 300 mm
Y - axis 160 mm
Bkkqydry32
Z - axis 340 mm
Speeds from 40 - 2000 rpm.
Spindle holder SK 40
Weight approx. 800 kg
Accessories: Central lubrication, coolant system, separate switch cabinet, extendable quill.
the machine comes from a training workshop more
Travels: approx. X = 320, Y = 170, Z = 320 mm.
Spindle holder: SK 40 with S 20 x 2 tightening thread.
Spindle speeds: 50 - 2000 rpm.
Feeds in the X and Z axes.
Including rotary and tilting table with additional travel of approx. 80 mm in the Y - axis.
Universal swivel milling head with drilling sleeve,
B3grzpcq
1 set of collets with adapter for SK 40,
horizontal milling spindle, machine vice,
Coolant system, machine lamp and documentation.
Table Clamping surface: approx. 450 x 170 mm.
Weight: ap... more
Universal milling machine
Manufacturer Cover
Type FP1
Travels
Fkpmaiubg
X/Y/Z 300/160/340
Tool holder SK40
Tilt and swivel table
Machine runs like clockwork, but unfortunately the feed has a defect and is without function.
Machine comes from a training workshop.
Available from week 33
incl. various tool holders more
1986
excellent (used)
Universal milling machine lid FP1 with 3 - axis - active digital display TNC 113 HEIDENHAIN and infinitely variable feed Super condition
Technical data:
ᐳᐳ year 1986 machines no. 2102-3244
ᐳᐳ Tilt Swivel turntable (or solid angle table)
ᐳᐳ speed: 40-2000 RPM
ᐳᐳ feed adjustable on 3 axes
ᐳᐳ rapid motion in 3 axes
ᐳᐳ drive power.: 1.5 / 1.9 KW
ᐳᐳ spindle brake
ᐳᐳ traverse path X/Y/Z: 300/160/340 mm
ᐳᐳ vertical milling head on spindle block 100 mm adjustable
Nl7tb
ᐳᐳ vertical spindle and ... more
1 x milling machine
Aciera
F 3
Year of construction: 1985
Technical data:
Travel X:300/Y:135 /Z:205mm
Spindle speeds: 100 - 2000 rpm
(8 steps)
tool holder: SK 30
Rigid angle table
Feed in X
Feed speed:12 - 232 mm/min
Bkhw0dg82c
(8 steps)
Accessories:
1 x vice
1 x quick release head
1 x SK 30 collet holder with 18 ER collets
from 2 - 20 mm
4 x SK 30 milling adapter D: 13/22/27/32 mm
4 x direct collet D: 3/5/7/8 mm
1 x operating instructions
The machine can be inspected under power at our warehou... more
Universal tool milling machine
Make DECKEL Type.FP1 Year of manufacture 1981
X-axis travel 300mm
Bjvqnz97u7
Y-axis travel 160mm
Z-axis travel 340mm
Spindle holder SK40 with tightening thread S20X2
spindle speed : 40-2000 rpm
table clamping surface : 600mmX200mm
T-slots size:12mm
Feeds Infinitely variable
feed X-axis 290mm
feed Z-axis 330mm
Rapid traverse in X and Z axis
Weight of the machine ca.700 Kg.
Coolant system, machine lighting,
Machine in good condition and ready for immediate use
Underc... more
Machine type: Tool milling machine,
Manufacturer:Cover,
Model: FP 1,
Condition: very good,
Offer type: used machine,
Technical data:,
Speeds: 60 - 1900 rpm,
Table: 600 x 210 mm,
Spindle holder: SK 40,
Ways:,
x= 250 mm,
y= 150 mm,
z= 340 mm,
Drive: 1.1 / 1.4 kW,
Remark:,
Heidenhain 3-axis digital display,
external coolant system,
Röhm machine vice with,
Swivel plate 110 mm jaw width,
3 tool holders SK 40,
older general overhaul and conversion to SK 40,
from the company Deckel-Gildemeister,
... more
Manufacturing origin Swiss
Voltage 380/50/3
Netweight 740 kg
Dimensions 155x110x160 cm
Total power 2,1 kW
Customs position 8459.6930
spindle ISO 30, with digital read-out Sony LM31 - 3 axes
TECHNICAL DATA
Geometrical characteristics
VERTICAL RECTANGULAR TABLE
- working surface 740x200 mm
- number of T-slots 2
- width of T-slots 12-H7 mm
- distance between slots 120 mm
FIXED ANGULAR TABLE (accessory 13-5.421)
- working surface 700x250 mm
- number of T-slots 5
- width of T-slots ... more
ready for operation (used)
Internal article number: 20050
Vertical milling machine
Manufacturer: Steinel
Type: SV 4
Machine no.: 1331
N7b0f
Travel X 300 mm / Z 280mm
quill stroke: 90 mm
Clamping surface 740 x 200 mm
Feed rate: 0.10/ 0.15/ 0.24/ 0.32/ 0.50/ 0.71 mm/rev
Recording: MK3
Milling spindle speeds 112 - 2240 rpm.
milling head +/- 45° swiveling
2 speed levels
Left- Right rotation
Tightening rod for the tool holder strikes, therefore noise at spindle speed
Belt for feed torn, therefore no automatic feed is possible... more
2004
good condition (used)
Universal milling machine Macmon M100 RE with 3 - axis digital display of Fagor super condition of training workshop
Technical data:
Bc3ge2zqwh
ᐳᐳ year 2004 machines-Nr. 2196
ᐳᐳ 3-axis digital display Fagor
ᐳᐳ solid angle table of ᐳᐳ speed: 40-2000 RPM
ᐳᐳ feed in 2 axes of 9-450 mm / min
ᐳᐳ traverse path X/Y/Z: 310/170/340 mm ᐳᐳ equipment: vertical & horizontal spindle of ᐳᐳ vertical Quill extendible - SK-40
ᐳᐳ suit system M16
ᐳᐳ weight 800 kg accessories and equipment:
ᐳᐳ 3-axis digital disp... more
Aciera F3 W20
Universal freesbank
Specificatie
Puh2ki
maker Aciera
Type F3
Bj. onb.
Besturing conv.
As-verplaatsing
X-as 300 mm
Y-as 300 mm
Z-as 135 mm
Hoofdspil
Toerental 100- 2000 Omw/min
Opname W20
extras
Heidenhain digitaal
Various accessories more
For sale:
1 piece used tool milling machine
Manufacturer: Avia
Model: FNC 25
FY: 1969
Travel X/Y/Z: 360 / 210 / 340 mm
Speed range: (16) 56 - 1800 mm
spindle stroke: 50 mm
Feeds: (16) 11.2 - 355 mm/rev
table size: 250 x 690 mm
Projection: 330 - 530 mm
Connection: 400 V
Dimensions LxWxH, approx.: 1250 x 1250 x 1820 mm
Equipment:
Vs8yti
- Coolant unit in stand with pump
- Emergency stop pushbutton
- Machine Light more
Paintwork damage and traces of use present
Serial number: 1701236
Versatile range of application
Excellent damping properties and stability of the machine frame
All guideways hardened and precision ground and adjustable by means of wedge bars
Dovetail guide in the X and Y axis
Automatic feed in X, Y and Z axis, infinitely variable
Ball screws in all axes
Swivelling and clearly arranged control panel with integrated digital position and speed display
Solid cross table, large dimensioned and prec... more
Manufacturing origin Swiss
Voltage 380/50/3
Netweight 740 kg
Dimensions 155x110x160 cm
Total power 2,1 kW
Customs position 8459.6930
head ISO30, tilting table, lighting, cooling,
chips receiving vat
TECHNICAL DATA
Geometrical characteristics
VERTICAL RECTANGULAR TABLE
- working surface 740x200 mm
- number of T-slots 2
- width of T-slots 12-H7 mm
- distance between slots 120 mm
FIXED ANGULAR TABLE (accessory 13-5.421)
- working surface 700x250 mm
- number of T-slots 5
- width of... more
Milling machine Deckel FP 1
Work area:
approx.
X : 300 mm
Y : 160 mm
Z : 300 mm
Weight: approx. 800 kg
Pick up by yourself or forwarding agent. We are happy to assist you in organizing an inexpensive forwarding agency.
You are welcome to come by for a tour.
You will receive a proper invoice.
A net invoice can also be issued for foreign customers. Prerequisite is a valid Ust.Indent.Nr.
Subject to prior sale.
Indicated company names and trademarks are the property of their owners and serve o... more
2004
good condition (used)
Universal milling machine Macmon M100 RE with 3 - axis digital display of Fagor super condition of training workshop
Technical data:
ᐳᐳ year 2004 machines-Nr. 2198
ᐳᐳ 3-axis digital display Fagor
ᐳᐳ solid angle table of ᐳᐳ speed: 40-2000 RPM
ᐳᐳ feed in 2 axes of 9-450 mm / min
ᐳᐳ traverse path X/Y/Z: 310/170/340 mm ᐳᐳ equipment: vertical & horizontal spindle of ᐳᐳ vertical Quill extendible - SK-40
ᐳᐳ suit system M16
ᐳᐳ weight 800 kg accessories and equipment:
B3ttxgd
ᐳᐳ 3-axis digital display... more
table mounting size: 190 x 710 mm
table movement x: 390/360 mm
Mu00n8
table movement y: 150 mm
table movement z: 280 mm
spindle taper: SK 40
spindle turning speed range: 100 - 3100 rpm
carriages longitudinal: 0 - 600 mm/min
electrical connection: 380 V, ca. 1,5 kW
space needed: 1400 x 1200 x 1500 mm
weight: ca. 680 kg more
Universal tool milling machine
Make: DECKEL
Model: FP 1
Year of construction: 1976 - workshop tested
Machine no.: 53426/08
geometric acceptance with test report
Accessories:
- 3-axis digital display
Heidenhain ND 750
- Fixed table 600 x 210 mm (T-slot 12 mm)
- Vertical milling head SK 40 with tightening thread S 20 x 2
- Coolant system
- Counterholder with counter bearing
- Operating instructions
- used, as seen, but without guarantee -
Bi2mnfc0tw more