Bed milling machine buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
4
x-travel:2000 mm y-travel:800 mm z-travel:1000 mm table-size:2200 x 700 mm Ctavmxus spindle taper ISO:50 spindle turning speed range:20 - 2000 U/min spindle motor:24 kW total power requirement:35 kW weight of the machine ca.:10 t dimensions of the machine ca.:4,5 x 2,2 x 2,5 m CNC control HEIDENHAIN TNC 150 H/V Milling Head misc. arbors coolant device more
3
x-travel 1050 mm y-travel 560 mm z-travel 510 mm table-size 1200 x 560 mm spindle taper ISO 50 turning speed range 15 - 4000 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid motion -longitudinal/cross/vertical 10 m/min distance spindle nose and table 150 - 660 mm Dgjie0x distance spindle center to column max. 650 mm table load max . 1 t no. of tools in magazin 24 tool diameter 110 mm workpiece length 350 mm weight of tools max. 15 kg spindle drive 7,5 kW control FANUC 11 MA tot... more
5
x-travel:3000 mm y-travel:1200 mm z-travel:1500 mm table-size:3500x1100 mm workpiece weight:7000 kg drive capacity - spindle motor:22 kW spindle cone:50 / DIN 69871 ISO spindle turning speed range:20-2000 U/min dimensions of the machine ca.:8.000 x 3.167 x 3.400 m weight of the machine ca.:20 t CNC controller: Heidenhain TNC 530 universal milling head: Vn3c3kgvs round table C-axis:AISIAKIN MOD DVH -320 (1.000 x 1.000 mm) Guarding:neu/new Checked, used universal milling machine Correa A25... more
4
x-travel 2000 mm y-travel 900 ( 1000 ) mm z-travel 1200 ( 1500 ) mm table surface area 2500 x 920 mm spindle taper ISO 50 SK spindle turning speed range 10 - 2000 U/min feeds longditudinal/cross/vertical 10-3000 mm/min rapid travel x/y/z 8000 mm/min spindle motor 22 kW table load capacity 5500 kp Control Heidenhein TNC 355 total power requirement 35,3 kW weight of the machine ca. 16,2 t dimensions of the machine ca. 4,5 x 3,7 x 2,4 m 20i9rv • CNC-control HEIDENHAIN TNC 407- with hand wheel,... more
6
x-travel 1800 mm y-travel 740 mm z-travel 900 mm control FANUC-OMF table-size 2000 x 600 mm table load capacity 2000 kp 7z2rkuqua spindle taper ISO 50 spindle turning speed range 21 - 2250 U/min voltage 380 V total power requirement 11 kW CNC-Control Fanu OM Transport dimensions: 2,95 x 4,30 x 3,00 m more
6
x-travel 2000 mm Mt3itk y-travel 1000 mm z-travel 1000 mm Control TNC426/430 table surface area 2200x950 mm tool changer 50 coolant chip conveyor kW universal head 2-Achsen gesteuert spindle turning speed range 20-3800 U/min tool taper SK 50 internal coolant system feed total power requirement 30 kW weight of the machine ca. 23 t dimensions of the machine ca. 9x5x3,5 m more
4
ZAYER Bed type milling machine. Model 30 KFU 4000 (5 ejes). Table 4000 x 1000 mm. Max. allowed weight on the table 10 Tn. Travels: • X 3711 mm • Y 1260 mm • Z 1518 mm. Tapper cone DIN 69871 A50. Spindle speed 35 - 3.000 r.p.m. Main motor power 37 Kw. Feeds 6- 5000 mm/min. Rapid advance 15000 mm/min. Weight 27.000 kgs. Equipped with: • CNC HEIDENHAIN TNC 426 • Electronic hand-wheel • Changer 30 tools • Automatic head 1º-1º. • Inner cooling 25 bar Mwqp7 • Chip conveyor more
3
x-travel 1250 mm y-travel 700 mm Uqwb0w22p z-travel 665 mm table-size 1350 x 700 mm table load max. 1000 kg spindle taper ISO 50 turning speed range 20 - 2000 U/min control HEIDENHAIN TNC 150 feed X/Y/Z-axis 1 - 3000 mm/min. rapid traverse X/Y/Z axis 6000 mm/min. total power requirement 12 kW weight of the machine ca. 9 t range L-W-H 3,10 x 2,70 x 2,55 m acc.: original HURON-millinghead, hydr. tool clamping more
1
x-travel:3500 mm y-travel:1000 mm z-travel:1000 mm table-size:3500x900 mm workpiece weight:5000 kg drive capacity - spindle motor:22 kW spindle cone:50 ISO spindle turning speed range:20 - 3.000 rpm dimensions of the machine ca.:10.000 x 5.070 x 2.850 mm weight of the machine ca.:17 t MPG hand wheel:HR 410 UNIVERSAL AUTOMATIC A-C TYPE 2.5° MILLING HEAD (VG:2,5° UDG Machine semi-cover: automatic tool changer:30 fach Bdhtrwenu inner coolant:20 bar chip conveyor with chip bucket: coolant syste... more
6
x-travel 1565 mm y-travel 725 mm z-travel 600 mm control HEIDENHAIN TNC155 Hjon8lh tool taper SK 40 table-size 2000 x 540 mm speeds bis 3000 U/min milling motor 10 kW table load max. 2000 kg rapid traverse 6000 mm/min control Heidenhain TNC 155 weight of the machine ca. 6 t dimensions of the machine ca. 2,2 x 2,8 x 2,65 m Condition: very good Electric 380 Volt NC dividing apparatus with tailstock as 4. axis Hofmann WRMN 300 Hydr. tool-clamping Machinelight Machine manual Machine... more


bed millin...
every day

New machines via email!

Be informed!
4
Double end, edge banding machine, Ritz engine, Zerspanermotor, electric motor power 3.7 kW 2885 rev / min at 50 Hz 5.2 kW power 5870 r / min at 100 Hz voltage 380 volt input shaft 35 mm tool 180 x 40 - 55 mm dimensions 540/250/H160 mm Weight 46 kg Qk8cis0ch more
6
x-travel 2200 mm y-travel 1000 mm z-travel 1300 mm table-size 2500 x 1000 mm control Heidenhain TNC 155 table load capacity 4000 kg spindle taper ISO 50 spindle turning speed range 40 - 2500 U/min voltage 400 V total power requirement 15 kW weight of the machine ca. ca. 20 t CNC-Control Fanu OM Ftz2vt2 Transport dimensions: 2,95 x 4,30 x 3,00 m more
6
x-travel: 3000 mm y-travel: 1800 mm z-travel: 1000 mm w-axis: 350 mm spindle diameter: 130 mm spindle stroke - max.: 1100 mm tool taper: SK 50 Ey9t8vj control for program: Siemens S 5 - HSM/FIDA 11 milling head speed: [...] / 4 step U/min distance spindle nose and clamping angle: min./max.: 300/1300 mm feed: x+y+z: [...] / 3 step mm/min clamping table: LxB: 5500 x 1800 mm table load: 20,0 t total power requirement: ca. 30 kW Weight approx.: 63,0 t Jib length Arm - Milling Machine Milling Unit:... more
3
x-travel 1600 mm y-travel 700 mm z-travel 840 mm table-size 1900 x 600 mm spindle taper ISO 50 turning speed range 15 - 3890 U/min feeds longditudinal/cross/vertical 1 - 2000 mm/min rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 8 m/min table load capacity max. 4000 kg spindle drive 10 kW control HEIDENHAIN TNC 355 vertical head swivelling +/- 90 ° total power requirement kW weight of the machine ca. 8,4 t dimensions 3,55 x 2,92 x 2,75 m Yqfix8 Accessories: vertica... more
3
x-travel:2500 mm y-travel:800 mm z-travel:800 mm table-size:2500x700 mm workpiece weight:4000 kg drive capacity - spindle motor:22 kW spindle cone:50 ISO spindle turning speed range:20-4000 U/min dimensions of the machine ca.:6,605 x 2,9 x 2,76 m weight of the machine ca.:9,5 t CNC controller: Heidenhain TNC 426 :manuell schwenkbar :HR 410 Yq72mw7nr Used universal bed type milling machine with Heidenhain TNC 426 The machine was mechanically retrofitted in 2016 more
6
x-travel 3000 mm y-travel 1000 mm z-travel 1000 mm Control TNC415 table surface area 3.200 x 960 mm number of T-slots 7 T-slot - width 22 H7 mm T-slot - distance 140 mm max. workpiece weight 6.000 kg spindle turning speed range 20 - 2.000 U/min 9wdc7bdlz spindle drive 30,00 kW tool taper SK50 feed X/Y/Z-axis 0 - 4.000 mm/min rapid traverse X/Y/Z 10,00 m/min total power requirement 55,00 kW weight of the machine ca. 19,00 t dimensions of the machine ca. 8,00 x 4,50 x H3,00 m Bed type milli... more
4
Double end, edge banding machine, Ritz engine, Zerspanermotor, electric motor power 4.5 kW 2900 rev / min at 50 Hz 6.3 kW power 5900 r / min at 100 Hz voltage 380 V take-up shaft 38 mm tool 200 x 30 - 60 mm dimensions 640/150/H250 mm Weight 52 kg Ql8bcwgnp more
6
x-travel 1250 mm y-travel 700 mm z-travel 665 mm table-size 1350 x 700 mm table load 1200 kg spindle taper ISO 50 DIN 69871 turning speed range 20 - 2100 U/min control Heidenhain TNC 355 feed X/Y/Z-axis 1 - 3000 mm/min. rapid traverse X/Y/Z axis 6000 mm/min. spindle motor 14 kW electrics - voltage/frequency 380 / 50 V/Hz total power requirement 30 kW weight of the machine ca. 10,3 t range L-W-H 3,3 x 3,4 x 2,5 m CNC control Heidenhain TNC 355 Mvslh original HURON-milling head, hydr. tool c... more
6
Control: HEIDENHAIN 426 Machine: 35955 hours Runtime: 9555 hours Bohpxrke Traverse paths: x, y, z - 2500,1000, 1500 mm Tool holder: Sk 50 Tool capacity: 40 External rotary table: 800 x 800 mm Machine can be seen under power. more
6
x-travel 2800 mm y-travel 1000 mm z-travel 1200 mm table surface area 2000 x 800 mm rotary table dia. 800 mm spindle taper SK 50 spindle turning speed - stepless 50 - 2000 U/min max. torque on the spindle 3000 Nm spindle drive 30 kW feeds longditudinal/cross/vertical 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical 7 m/min control SIEMENS control SINUMERIK 850 M no. of tools in magazin 56 workpiece diameter at full load 114 mm wotkpiece diameter with 2 vacant positions 200 mm workpi... more
1
x-travel:3000 mm y-travel:1000 mm z-travel:1000 mm table-size:3300x900 mm workpiece weight:7000 kg drive capacity - spindle motor:30 kW Yq72widbs spindle cone:50 / DIN 69871 ISO spindle turning speed range:20-2500 U/min dimensions of the machine ca.:7,81 x 3,6 x 3,7 m weight of the machine ca.:13,5 t CNC controller: Heidenhain TNC 155 universal milling head: Guarding:neu/new Used universal milling machine Correa A25/30 with Heidenhain control 155 Other technical specifications and access... more
6
Control: Fagor 8025 in 2007 partially overhauled Procedures: x travel: 2550 mm 902clffvy y travel: 1010 mm z travel: 1060 mm Table size: 3500 x 1100 mm Drive power - spindle motor: 15 kW Spindle speeds: 20-1800 rpm Space requirement approx.: 6,500 x 3,367 x 3,000 m Machine weight approx.: 12.5 t Universal milling head: more
4
Double end, edge banding machine, Ritz engine, Zerspanermotor, electric motor power 3.7 kW 2885 rev / min at 50 Hz 5.2 kW power 5870 r / min at 100 Hz voltage 380 V take-up shaft 40 mm tool mm Dimensions 480 / 250/H150 mm Weight 36.5 kg Ql77zzire more
4
Table 2200x750 mm Travels: X 2000 mm Y 800 mm Z 1000 mm Cone ISO 50 Power 30 Kw Machine weight 10.000 kgs Equipped with: - CNC HEIDENHAIN TNC 530 - Electronic hand-wheel HR 410 - Automatic head 2.5º - 2.5º 9288bfhkd - High pressure pump and paper filter - Chip conveyor more
5
Technical Data 7ojkj9uzy CNC-Bed Milling Machine manufacturer ANAYAK type HVM 3300 built 1998 travels X-Y-Z 2.700 x 1.200 x 1.000 mm travels: X – axis 2.700 mm Y – axis (cross) 1.200 mm Z – axis (vertical) 1.000 mm feeds: feed all axis 2 – 10.000 mm/min rapid feed all axis 10.000 mm/min workpiece table measurement 3.300 x 1.000 mm max. table load 5 to/m² milling spindle tool taper ISO 50, DIN 69871 clamping-bolt DIN 69872 Form A min./max. speed 20-4.000 min-1 power 30 kW autom. milling... more
2
x-travel 1900 mm y-travel 1000 mm z-travel 1015 mm table surface area 2200 x 1000 mm spindle taper SK 50 control SIEMENS Ltxwjhql control SINUMERIK 840 C spindle turning speed range 2000 U/min feeds longditudinal/cross/vertical 5000 mm/min rapid traverse 15 m/min table load max. 10 t total power requirement 34 kW weight of the machine ca. 24 t Accessories: magnetic plate 1250 x 500 mm, approx. 30 tool fixtures more
5
x-travel:3000 mm y-travel:1200 mm z-travel:1000 mm rapid power traverse in X-and Z direction:15/10 m/min milling feed range:2 - 5.000 mm/min table-size:3500x1100 mm workpiece weight:8000 kg drive capacity - spindle motor:29,6 kW spindle cone:50 ISO spindle turning speed range:20-3000 U/min dimensions of the machine ca.:7.700 x 4.467 x 2.900 m weight of the machine ca.:20 t CNC controller: HEIDENHAIN TNC-426-PB universal milling head:manuell : Lr9vx Overhauled universal milling machine Corre... more
3
MACHINE: milling FIL FA-200 Control Haidenhain TNC 155Q Built in 1987 Hours of operation approx. 58800 h Spindle hours: vertical spindle: 12300 h Horizontal spindle: 8000 h TECHNICAL data: X-axis: [mm] 2000 Y-axis: [mm] 1100 Z-axis: [mm] 755 Bzt7t3b Vertical spindle speed: [RPM] 1400 Horizontal spindle speed: [RPM] 1250 Connection value: [kW] 30 at 400 V more
4
Double end, edge banding machine, Ritz engine, Zerspanermotor, electric motor power 3.7 kW 2885 rev / min at 50 Hz 5.2 kW power 5870 r / min at 100 Hz voltage 380 V take-up shaft 40 mm tool mm Dimensions 480 / 250/H150 mm Weight 36.5 kg Ql78dkoff more
4

Bed type milling machine LAGUN GBM 42E

Parets del Valles (Barcelona) Spain
6519 km
2008
USED
Table 4200 x 1000 mm. Max allowed weight on the table 10.000 kgs. Travels: • X 4000 mm. • Y 1200 mm. • Z 1500 mm. Cone ISO-50 Spindle speed 4.000 rpm. Spindle power 28 kw Total power requirement 49 kw Rapid advances 10.000 mm / min Machine dimensions 9.800 x 4.500 x 3.200 mm Machine weight 23.000 kgs Equipped with: - CNC HEIDENHAIN iTNC 530 - Electronic hand-wheel HR 410 - Automatic head 2.5º - 2.5º - Prepared for a 4th axis - Ramdon changer 24 tools - High pressure pump 9280yijny - Chip con... more
4
Capacity: 2500x1000x1000 mm Year of construction: 1989 WORKING CAPACITY Longitudinal (x): 2500 mm Vertical (y): 1000 mm Cross ram (z): 1000 mm CNC Cnc: Heidenhain TNC355 0sxbejer Measuring system: Heidenhain linear scale on 3 axes Notes: rigid tapping SPINDLE Spindle power: 15 Kw Rotating speed: 10-2250 Rpm Taper: ISO50 TABLE 1 Surface: 3000x800 mm Capacity: 4000 Kg HEAD 1 Type: KAR2 Spindle taper: ISO50 A axis: automatic 180 ° C axis: manual ° Max speed: 10 - 2250 R... more
1
x-travel 1500 mm y-travel 700 mm z-travel 700 mm table surface area 1800 x 600 mm spindle taper SK 50 spindle turning speed range 30 -1600 U/min transmission ratio 2 control HEIDENHAIN control TNC 155 feeds 5 - 2000 mm/min rapid motion -longitudinal/cross/vertical 8 m/min spindle drive 11 kW Xhqzgwe2 total power requirement kW weight of the machine ca. 9,2 t dimensions l/w/h 3,4 x 3,15 x 3,12 m Accessories: vertical head swivelling in 2 planes (manual) with hydr. tool clamping, 2 count... more
1
x-travel:1200 mm y-travel:1000 mm z-travel:600 mm table-size:1600x630 mm rotary table (B-axis):360 x 1 Grad table load:20 kN weight of the machine ca.:100 kN voltage:380 V 50 Hz control voltage:220 V H9wdflhys traversing speed: all 3 axes:0-10.000 mm/min spindle drive:22 kW spindle speed:512 Nm spindle speed range:36-2250 U/min. rotary table: platen area diameter:600 mm main spindle- diamter in front bracket:100 mm main spindle - die clamping:automatisch main spindle - tool holder cone:ISO ... more
1
9n2rewz2oTable Surface 2000 X 700 mm. Longitudinal Traverse (X Axis) 2000 mm. Transversal Traverse (Y Axis) 800 mm. Vertical Traverse (Z Axis) 800 mm. Rapid Traverse 12.000 mm/min Taper ISO 50 Turning Speeds 20 – 3000 rpm Head Power 17 Kw Carrying Load Table 3.500 kg. Machine Weight 9.000 kg. Hydraulic Clamping Tool INCLUDED Control HEIDENHAIN TNC-426 Machine Condition SEMI – NEW Manufacturing Year 2003 more
4
Double end, edge banding machine, Ritz engine, Zerspanermotor, electric motor power 3.7 kW 2885 rev / min at 50 Hz 5.2 kW power 5870 r / min at 100 Hz voltage 380 V take-up shaft 40 mm tool mm Dimensions 480 / 250/H150 mm Weight 36.5 kg Ql77qic7d more
1
Double table system: Table 1 3.000 mm x 2.000 mm Table 2 3.000 mm x 2.000 mm Combined 6.000 mm x 2.000 mm Max allowed weight on the table 20-35tn Travels: • X 6.000 mm • Y 3.550 mm • Z 1.250 mm Distance between columns 2.800 mm Cone HSK 100 DIN 69893A Distance between table mounting surface and spindle nose with universal milling head: - In vertical position: 120 - 1370 mm - In horizontal position: 186 - 1436 mm Spindle speed 35 – 6.000 r.p.m. 2 speeds Rapid feed: 25000 mm/min Feed range: ... more
4
9x3u9uzq8 Capacity: 2000x1250x800 mm Year of construction: 1999 Working hours: ≈18.000 WORKING CAPACITY Longitudinal (x): 2000 mm Vertical (y): 1250 mm Cross ram (z): 800 mm CNC Cnc: HADENHEIN 426 CB Measuring system: RIGHE OTTICHE SPINDLE Spindle power: 18,5 Kw Rotating speed: 4000 Rpm Taper: ISO 50 FEEDS Rapid x: 15 m/min Rapid y: 15 m/min Rapid z: 15 m/min X: 5 m/min Y: 5 m/min Z: 5 m/min FIXING TABLE Floorspace (lxwxh): 2200x750 mm Capacity: Tot. 3.500Kg / 2.000 K... more
6
Bed-type thing man T 10 Procedures X = 2000 mm 9mrh0lojr Y = 1075 mm Z = 1000 mm Table size: 2200 mm x 710 mm / max table load: 4000 kg Control: HEIDENHAIN TNC 426 E handwheel HR 410 Spindle taper: ISO 50 DIN 69781 Spindle speed: 5000 RPM Internal cooling: Cooling through spindle Tool changers: 20 tools Universal milling head indexable 2.5 / 3 ° degree Chip conveyors and CE cover Machine is ready but disassembled Functional warranty is given Price: Free de... more
5
x-travel:1800 mm y-travel:800 mm z-travel:800 mm table-size:2.000 x 700 mm workpiece weight:3500 kg drive capacity - spindle motor:17 kW spindle cone:50 ISO spindle turning speed range:3000 U/min dimensions of the machine ca.:4.886 x 2.714 x 2.417 m weight of the machine ca.:9 t chip conveyor: CNC controller: Heidenhain TNC 410 :manuell : 32eccozqa used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs do... more
6
CNC bed milling machine from the manufacturer Iberimex-Acme. The machine is in good condition and can be inspected and tested in our warehouse. Technical specifications: Manufacturer: Iberimex-Acme Type: FMB-12 CNC Control: Heidenhain TNC 355 (TFT) Year of construction: 1990 Table dimensions: 1200x500 mm Number of T-slots: 5 x 14 mm Max. Table load: 1500 kg Travel distances: 1000x550x600 mm Feed rates: 1-10,000 mm / min Rapid traverse: 10 m / min 3fodpbrdp Tool holder: ISO 40 Speeds: 1. Ra... more
5
Double end, edge banding machine, Ritz engine, Zerspanermotor, electric motor-unfortunately no nameplate therefore data approx-power 3.7 kW 2885 rev / min at 50 Hz power 5.2 kW 5870 U / min at 100 Hz voltage 380 volt input shaft 40 mm tool 200 x 20 mm Dimensions 520/250/H160 mm Weight 42 kg Qkp03ofsp more
3
SORALUCE milling machine. Model TR 35. Table 3860 x 1200 mm. Max allowed weight on table 10.500 kgs. Travels: X 3500mm Y 1200mm Z 1600mm. Spindle taper ISO 50. Spindle Speed 30-3.000 rpm. Power 37 Kw. Machine dimensions 8900 x 4950 x 3800 mm. Machine weight 25.000 Kgs. 0lurgvmz Equipped with: CNC HEIDENHAIN TNC 426. Automatic milling head 2.5º - 2.5º. ATC 30 tools changing. Chip conveyor. more
6
SORALUCE 6000 SL Mfg. year 2014 Heidenhain iTNC 530 HSCI (5-axis plus spindle) Incl. Heidenhain smarT.NC Movements X/Y/Z 4.500 mm/1.600 mm/1.300 mm table size: 6.000 mm x 1.100 mm swiveling head 2,5°, 144 positions per lever spindle motor 43 kW / 900 Nm, water-cooled Heidenhain Inline-Motor max. spindle speed 5.000 rpm ATC with 40 stations CAT-50 taper Coolant through spindle 20 bar 1000 Liter coolant tank plus 500 Liter tank with pump max. rapid in all axis 35.000 mm/min max. feed rate in all a... more
6
TNC Heidenhain 426 Table: 2500x700 mm X-travel: 2000 mm Y-travel: 800 mm Z-travel: 800 mm Taper: ISO 50 Rapid feeds: 12 m/min Main motor power: 22 kW B/C axis: 2.5º/2.5º indexing Yrirow Max weight on table: 4000 Kg Weight of the machine: 10.000 Kg 4th axis: 600 mm diameter SPIRSIN NC indexing table with tailstock Additional information: UDG automatic milling head, twin chip conveyor, large set of tooling, magnetic table more
1
Table Surface 2000 X 630 mm. 8zvpiyx2u Longitudinal Traverse (X Axis) 1800 mm. Transversal Traverse (Y Axis) 800 mm. Vertical Traverse (Z Axis) 800 mm. Rapid Traverse 15.000 mm/min Taper BT -50 Turning Speeds 20 – 3000 rpm Head Power 25 CV Carrying Load Table 6.000 kg. Machine Weight 14.000 kg. Tool Charger 30 Tools Chip Conveyor INCLUDED Auto Indexing HEAD 0- 180 º Year 1992 CNC FAGOR 8050 M more
6
used column moving Bed Milling Machine Manufacturer ZAYER Model KC 8000 YOM 1990 With CNC - Control HEIDENHAIN TNC 415 Travels : Longitudinal = 8000 mm Transverse = 1500 mm Vertical = 2500 mm Juj2lm Speeds = 6 - 3000 mm Taper in spindle = 50 ISO Spindle power = 34 kW Feeds = 6 - 5000 mm/min Rapid longitudinal = 10 m/min Rapid transverse and vertical = 15 m/min Weight of the machine approx. = 35 ton more
4
Double end, edge banding machine, Ritz engine, Zerspanermotor, electric motor power 6.3 kW 5800 U / min at 100 Hz voltage 380 V take-up shaft 40 mm tool mm dimensions 540/260/H150 mm Weight 43 kg Hi3v9rvjc more
6
ANAYAK HVM 3800 Bed milling - Make : Anayak - Spain - Typ : HVM - 3800 - Age : 1997 - No. : 980111 - Power on hours : 19.500 - Table length : 3800 - Table width : 1000 - Table load : 8000 - Working area - X Travel : 3200 - Y Travel : 1200 - Z Travel : 1050 - Spindle : Sk 50 - Speeds : 50 – 3.000 Rpm - Milling head power : 37 kW - Feeding range : 0,01 – 3.000 rpm - Rapid traverse : 0,01 – 10.000 rpm 7ztbhtadp - CNC Control HeidenHain TNC 426 - Length : 6.300 - Width : 4.500 - Height :... more
4
Capacity: 1600x700x850+700 mm WORKING CAPACITY Longitudinal (x): 1600 mm Vertical (y): 850 mm Cross ram (z): 700 mm Table (v): 700 mm CNC Cnc: Heidenhain TNC355 SPINDLE Spindle power: 15 Kw Gearbox: 3 gamme automatiche Rotating speed: 40-1535 Rpm Taper: ISO50 FEEDS Rapid x: 6 m/min Rapid y: 6 m/min Rapid z: 6 m/min X: 1 m/min Myhlr Y: 1 m/min Z: 1 m/min TABLE 1 Surface: 1950x650 mm Capacity: 2000 Kg Total power supply: 25 Kw Machine total weight: 9000 Kg Floor space: 2... more
3
Bed type milling machine SORALUCE TA 20. Travels: X 2000 mm. Y 800 mm. Z 800 mm. Max allowed weight on table 4000 Kgs. Spindle cone DIN-697871-A. Spindle speed 3000 r.p.m. Main motor power 22 Kw. Weight 8.000 kgs. Equipped with: • CNC HEIDENHAIN TNC 426 2kgsorchd • Manual head • Chip conveyor • Perimetral cowling more


bed millin...
every day

New machines via email!

Be informed!

to

to

Change search
BED MILLING MACHINE
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close