Used milling machines - horizontal for sale (26)

Condition: used, Technical details: x-travel: 450 mm y-travel: 150 mm z-travel: 400 mm distance between column - table edge: min./max.: 100 / 250 mm turning speed range: 25, 44, 78, 130, 228, 400 / 6 step U/min feed:: X/Y: 10 - 100 / 8 step mm/min Table dimensions: 990 x 300 mm table surface area: 800 x 195 mm table swivelabel +/-: 30° ° total power requirement: nicht bekannt kW Nodpfou Nc Nljx Aa Dowg weight approx.: 1200 kg dimension machine xH: 1,5 x 1,3 x 1,5 m Horizontal milling machine, currently a tool clamped milling arbor Ø 32mm with hobbing cutter. Machine vice included. *

Condition: good (used), Year of construction: 1995, Universal milling machine, make AUERBACH, type: 315 FUW, year of manufacture 1995 Nwedsv Dab Djpfx Aa Dsg with 3-axis digital display HEIDENHAIN, hydraulic tool clamp, machine vice tool holder, counter holder for horizontal milling, coolant system, machine documentation in good condition. Travel paths: X 500 mm Y 400 mm Z 330 mm Table: 400 mm X 700 mm Spindle mount: ISO 40 Spindle speeds: 20-3000 rpm Rapid traverse: X / Y / Z. For further data, see data sheet.

Condition: new, I sell, milling machine new. Njdeuuiytopfx Aa Dswg

Condition: defective spare-parts repository (used), Year of construction: 1979, functionality: unexamined, machine/vehicle number: 281, total height: 2,150 mm, total width: 2,450 mm, total length: 2,200 mm, table width: 400 mm, table length: 1,700 mm, type of input current: three-phase, input voltage: 380 V, input current: 20 A, input frequency: 50 Hz, Gertner 6R13 Milling Machine – Defective / Uninspected For sale: a used Gertner Type 6R13 milling machine. The machine is explicitly sold as defective or uninspected. It is sold exclusively as a DIY project, a source of spare parts, or for repair. The milling machine was taken out of service for safety or age-related reasons. No guarantee is given for functionality, accuracy, or operational safety. Nedpfjy Urbvsx Aa Dewg Technical Data Manufacturer: Gertner Type: 6R13 Machine Type: Universal Milling Machine / Console Milling Machine Horizontal/Vertical Milling Machine, depending on the model Feed drive: mechanical Multiple feed stages Coolant system available High-voltage connection: 400 V Robust cast iron construction Suitable for machining steel, aluminum, and machine components Condition Used Explicitly sold as defective Uninspected condition Ideal as a source of spare parts or a restoration project No warranty No returns Inspection is highly recommended Loading and transport are the responsibility of the buyer Note: Technical specifications according to the nameplate or the existing model. Year of manufacture and accessories, see photos. Sale is made excluding any liability for material defects.

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Nwedpfoy Ugxpsx Aa Dsg Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: good (used), Stock No.: 3099 Manufacturer: WMW Auerbach Nedpfey R S U Usx Aa Dswg Year of manufacture: 1962 Machine number: 545 Type / Model: FW 160 Travel (x-y-z): 425 - 140 - 315 mm Table: 630 x 160 mm Clamping area: 530 x 120 mm Speed range: 85 to 2,800 rpm Spindle taper: SK 40 Feeds: 5 to 250 mm/min Rapid traverse: 2,500 mm/min Power connection: 2.3 kW Accessories/Equipment: Condition: good Weight: 0.85 t Dimensions: 1,000 x 1,000 x 1,450 mm

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, High-end 5-axis flipping machine for aluminum structural components available at short notice. 90–95% completed, available for on-site demonstration under power. Delivery approx. 3 months. For sale is a state-of-the-art horizontal 5-axis flipping machine (HM2040AL-AC), specifically designed for machining large-format, thin-walled aluminum structural components in the aerospace sector. The machine is approximately 90–95% completed, installed at the factory, and can be inspected under real machining conditions. 👉 This machine platform has already been installed more than 80 times. Highlights - Available at short notice (delivery time approx. 3 months) - High-end configuration (Fischer / Siemens / Heidenhain) - Full 5-axis machining in a single setup - Integrated flipping system (90° rotation) - Ideal for aerospace aluminum structures - Very attractive price-performance ratio - Includes 2 pallets sized 2000 x 4000 mm, setup station, and rotary table Technical Data - Travel: 4300 / 2200 / 650 mm - Table size: 4000 × 2000 mm - Max. load: 4000 kg - Rapid traverse: 50 m/min - Feed rate: 30 m/min - Positioning accuracy: up to 0.008 mm - Repeatability: up to 0.004 mm Spindle - Fischer (Switzerland) - 30,000 rpm - 125 kW - 66 Nm - HSK-A63 - ICS 70 bar Features - 5-axis torque motor swiveling head (zero-backlash) - Siemens SINUMERIK 840D sl - 60-position tool magazine - Closed-loop measuring system (Heidenhain) - Automatic flipping system - High-pressure cooling - Chip conveyor & central lubrication Options - Renishaw laser tool measurement Nwjdpfjy H Ncbex Aa Djg - Workpiece probe - Ultrasonic thickness measurement (≤10 µm) - Vacuum clamping system - Spindle thermal compensation - R-TEST calibration system Including setup station and pallets! German service, spare parts warehouse, etc.

Condition: ready for operation (used), Aspar horizontal milling machine X-axis: 950mm Y-axis: 250mm Z-axis: 500mm Tour speed: Max 530 RPM Cone: 60mm Bed dimensions: 1300x300 mm Transport dimensions: 160x190x150 cm (LxWxH) Location: Hamont-Achel, Belgium Aspar horizontal milling machine X axis: 950mm Y axis: 250mm Z axis: 500mm Nwsdpfottrbhox Aa Deg Speed: Max 530 RPM Cone: 60mm Bed dimensions: 1300x300 mm Transport dimensions: 160x190x150 cm (LxWxH) Location: Hamont-Achel, Belgium Aspar Horizontalfräsmaschine X axis: 950 mm Y-axis: 250 mm Z-axis: 500 mm Geschwindigkeit: Max. 530 U/min Cone: 60 mm Bettabmessungen: 1300x300 mm Transport dimensions: 160x190x150 cm (LxWxH) Standort: Hamont-Achel, Belgium

Condition: used, Year of construction: 2005, Lot consists of: (1) 4-Axis HMC Technical Details: X/Y/Z 630 mm, spindle 15,000 rpm / HSK-63-A, A-axis swiveling table, CNC SIEMENS SINUMERIK 840 D. Nedpfx Aeym Tdzoa Dowg

Condition: used, Calibration: metric Rotating table size: 1100 x 820mm Spindle size: 70mm Spindle taper: 40 international Spindle speeds: 18 to 1000 (12) Spindle travel: 500mm X axis travel: 1500mm TBC Y axis travel: 1000mm Njdpfxoy Drp Se Aa Dowg Z axis travel: 1200mm Complete with Power rotary table 3 axis DRO Spindle steady Bolt on Boring and facing head on davit 400 mm Dia Machine in very good condition Dims :- 3500mm long 2200mm wide 2400 high and weighs 6500 Kgs

Condition: excellent (used), max. workpiece diameter 300 mm hobbing length 1000 mm clamping length 2400 mm spindle head ISO 40 distance work spindle /surface of the table 180 - 330 mm surface area 2410 x 375 mm longitudinal feed 1000 mm vertical movement of the milling spindle 150 mm turning speeds 45 - 500 U/min weight of the machine ca. 5,6 t dimensions of the machine ca. 3,0 x 1,6 x 1,9 m Nwsdpfxjyyqufo Aa Deg

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: Nodpoizxbiefx Aa Dswg - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: used, Year of construction: 1986, Machine: TC800 Serial number: 25132 Year of manufacture: 1986 Control: Sinumerik System 8 Tool holder: SK50 Travel: X: 1600 Y: 1000 Z: 1100 Optical measuring system in axes X, Y, Z 2 pallet table surface: 800x800 Pallet exchange system Tool magazine: 60 tools Nwjdpox Eyt Uefx Aa Deg Power supply: 380V 50Hz 55kW.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 140379000, feed length X-axis: 2,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,750 mm, total height: 4,500 mm, total width: 5,000 mm, total length: 6,000 mm, table width: 1,600 mm, table length: 1,800 mm, table load: 12,000 kg, input voltage: 380 V, milling spindle length: 900 mm, Equipment: documentation/manual, Horizontal Boring Machine Ivo Lola Ribar 130D – DIGITAL (DRO) For sale: horizontal boring machine Ivo Lola Ribar 130D, year 1986, in working condition. Technical data: • Spindle diameter: 130 mm Nedpoyxpp Ejfx Aa Dswg • X travel: 2000 mm • Y travel: 1600 mm (Bosch Rexroth FEM-E-S 63x10R) • Z travel: 1750 mm • W (spindle stroke): 600 mm • Table: 1600 × 1800 mm • Digital readout (DRO) Condition: • Machine in operation • Regularly used • Test possible on site • Working video available Note: • Y-axis ball screw Bosch Rexroth FEM-E-S 63x10R • Due to its good condition, the machine is suitable for upgrade to NC / CNC • Service manual, some gearbox assembly drawings and spare parts documentation Additional: • Inspection possible • Loading available by crane • Ball screws for W and Z axis in stock: (Bosch Rexroth FEM-E-S 63x10R). Not included in the machine price (by agreement) Location: [Gostol TST d.d., Ciginj 63, SI-5220 Tolmin, Sloveia] €22,500 (negotiable). Price is excluding VAT. For EU buyers with a valid VAT ID, 0% VAT (intra-community supply) applies. Otherwise, VAT will be charged according to applicable regulations. For more information, feel free to contact.

Condition: used, Year of construction: 2000, Good day, For sale is a Realmeca lathe. Year of manufacture: 2000 Low hours of operation The machine is in used condition. Length: 1920 mm Width: 1300 mm Height: 1655 mm Nedpfxexrd Hij Aa Dewg Weight: 2000 kg X-AXIS: 125 mm Z-AXIS: 400 mm BETWEEN CENTRES: 500 mm Diameter: 100 mm Price on request

Condition: used, Year of construction: 2001, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 322 002 252, feed length X-axis: 1,000 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 31 rpm, total height: 1,700 mm, total width: 3,000 mm, total length: 2,000 mm, table width: 360 mm, table length: 1,400 mm, rotational speed (max.): 1,400 rpm, input voltage: 400 V, The machine is fully operational. It is equipped with Heidenhain rails on all axes. The spindle is ISO 50 DIN 2080. Comes with inserts for disc milling and a new head for making grooves. The machine can be tested upon purchase. Nsdpoyh Aptofx Aa Dowg

Condition: new, Year of construction: 2025, feed length X-axis: 80 mm, feed length Y-axis: 80 mm, feed length Z-axis: 60 mm, Perfect for: Applications in model and mold making, as well as milling of other materials – a versatile powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composites such as CFRP / GFRP, model-making materials, aluminum Industries: Automotive, aerospace, transport & logistics, leisure industry, sanitary equipment, boat building, automation _____ Nwsdox S Eqljpfx Aa Deg Reference number: 1210 Available from: immediately CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle data: 13 kW / 10.3 Nm; 12,000-24,000 rpm; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 m/min Workpiece dimensions X/Y/Z: 3500 x 1500 x 700 mm Control: SIEMENS – Sinumerik One with hand terminal HT 2 Tool changer: 10 tools Tables: 1 table Vacuum system: yes Tool breakage and length monitoring: Renishaw TS 27 R Other: on request Year of manufacture: 2025 Condition: new

Condition: used, Year of construction: 2007, Technical details: Nwsdpfx Aaewi Nigs Deg weight of the machine ca.: 11,2 t one spindle *

Condition: good (used), Machine number: 2082 Type / Model: F315 Control: conventional travel x-y-z: 820 x 300 x 440 mm Nodpfjh Rawfjx Aa Dowg table: 1250 x 335 mm table clamping area: 1100 x 225 mm speed range: 56 to 2800 rpm spindle mounting: SK 40 Feed rate: 10 to 630 m/min rapid traverse: Connection: 6 kW Accessories/equipment: Condition: good weight: 2 t dimensions: 1700 x 2000 x 1900 mm

Condition: new, Features > 5-axis simultaneous CNC machine > Basic structure made of polymer concrete > Wet/dry machining > Workpiece zero-point clamping system > Servo drives with absolute encoder > Integrated control with touchscreen Nwsdshqhkijpfx Aa Djg Options > Machine base frame > Various Zero-point clamping devices: T-slotted plate, four-jaw chuck, precision vice and blank holder > Automatic placement system > 3D measuring probe > Why buy? Simply finance. Talk to us! The iMG 1010 is a compact solution for processing workpieces up to 100x100x100 mm. With its basic structure made of polymer concrete, it enables precise processing of numerous materials such as titanium, steel, CoCr, ceramics, sapphire, zirconium or aluminum. Particularly noteworthy is the arrangement of the Y-axis, which ensures high stability and enormous vibration damping thanks to its installation positions. Almost all positions on the workpiece can be reached without reclamping. The selection of workpiece clamping devices and holders in conjunction with the zero-point clamping system makes the machine a versatile machining center. Its design enables wet/dry machining without time-consuming retooling. The CNC machine can be extended with an optional loading and unloading system, which accesses the machine room from the right, left or from above. This allows workpieces to be changed automatically. The zero-point clamping system serves as an interface and ensures the exact and repeatable positioning of the workpiece. The system can be integrated into network-controlled, automated production processes using software interfaces. The maintenance-friendly design and the long-lasting direct spindle drives save service costs and time and offer a reliable machining system. During the design phase, care was taken to ensure that all elements are easily accessible and yet protected from external influences in order to guarantee a long service life. The sophisticated system offers numerous options for expansion.

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability Nwodpelkbpzjfx Aa Dog 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: new, machine/vehicle number: 280261 0001, Features Njdslnikkjpfx Aa Djwg > CNC machine ready for mains connection > Low-noise due to maintenance-free servo motors > ergonomically slim design > powerful isel control with maintenance-free servo motors > reliable linear units with steel ball screws are installed as drives > effortless operation thanks to height-adjustable display > network-compatible control PC with WINDOWS > user-friendly soft-lift hood > clamping of the workpieces by means of T-slot plate options > milling spindle 500W - 1200W > Linear tool changing station > Tool cooling as cooling spray or air version (CoolMin) > Length measuring probe > Vacuum clamping table > Maintenance unit with valve terminal > Substructure table with swivel screen and integrated keyboard > Substructure table is used to install the vacuum pump, cooling unit and other peripheral devices > Automatic hood opening > Safety light curtain > Why buy? Simply finance. Talk to us! The iCV 4030 EC is a compact tabletop machine with a proven, optimized chassis design. A practical substructure table with monitor and integrated keyboard is available as an option. The CNC machine has a modular design; all control components, including the isel CNC control and the control computer, are installed at the rear and are easily accessible for servicing. All linear axes mounted in the machine are from the isel range; they run with linear ball bearings on ground precision steel shafts. Backlash-free ball screw drives with various spindle pitches are used as drives. The machine table made of face-milled T-slot profiles offers a wide range of clamping options for individual workpiece fixtures and clamping devices. The iCV 4030 EC is suitable for numerous areas of application and industries; experience has shown that it is preferably used for machining. A comprehensive range of accessories tailored to your application rounds off the program.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 940110686, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 400 mm, table width: 660 mm, table length: 1,200 mm, Milling machine with comprehensive equipment! TECHNICAL DETAILS Travel paths: X-axis: 1,020 mm Y-axis: 560 mm Z-axis: 400 mm Table: Distance spindle-table: 550 mm Table size: 1,200 x 660 mm Table load capacity: 600 kg Rapid traverse: X-Y axis: 25,000 mm/min Z axis: 15,000 mm/min Spindle data: Spindle speed: 200 - 20,000 rpm Motor power: 11/15 kW Tool data: Tool magazine: 40 Taper: SK 40 MACHINE DETAILS Control: Yasnac M80 Dimensions & Weight: Required installation space: approx. 7,000 x 4,500 x 2,850 mm Machine weight: 9 t Total power requirement: 40 kVA EQUIPMENT 2 Pallet changers 1 pallet with 2 Chick clamps 1 pallet with 4th axis, Tsudakoma RNCV201 Njdpfxjw Np Tqo Aa Dswg Coolant tank Timer switch Scraper belt conveyor Renishaw probe Spindle chiller Air cooler Electronic handwheel

Condition: used, functionality: fully functional, Strigon TC3 Horizontal Milling Machine. X movement 800 mm Y movement 500 mm Z movement 400 mm C axis (integrated circular table) 360 x 1 degree Round table diameter D500 mm Max speed 4000 f/min Speed 8000 mm/min Machine weight approx 5500 kg Dimensions 4200 x 3600 x 2600 mm Good working condition. Please check out our other listings as well. Nsdpfxov Sk I Re Aa Djwg

Condition: excellent (used), Year of construction: 2013, Heidenheim TNC 530, SK 40, 12,000 rpm, 40 tool positions, through-spindle coolant, direct measuring system on all axes, central lubrication system, automatic loading doors, measuring probe, Nedpfx Aaexfqyvo Djwg