Year of construction: 1990, condition: ready for operation (used), controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis Nicolas Correa A-16 was manufactured in 1990. It features a CNC-controlled X, Y, and Z axis, a horizontal spindle, and a fixed table suitable for heavy-duty milling operations. The rigid cast-iron structure is designed for high stability. Although the CNC control has a fault, the machine is in good mechanical condition with a complete overhaul of the headstock motor carried out in 2024. Contact us for more information about this machine. Hfodpfxsyctg Ue Ahved • Operation mode: Manual/automatic operation (depending on configuration) • Spindle: Horizontal spindle • Table: Fixed table; suitable for heavy-duty milling operations • Construction: Rigid cast-iron structure; designed for high stability and accuracy • Condition: • Machine is in good mechanical condition • Headstock motor completely overhauled in 2024 • Paintwork in good condition (including push-button panel and general appearance) • CNC / Control: • CNC control has a fault • Control model: Heidenhain TNC 415 (no longer supported by manufacturer) • Control unit and monitor are currently dismounted • Machine requires a control retrofit / control replacement to be operational Additional equipment • No additional equipment mentioned (e.g., robots, automation, chip conveyor, bar feeder).

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HEIDENHAIN, controller model: 530, number of axes: 3, This 3-axis KIHEUNG KNC-U1000 was manufactured in 2007. It features a spindle speed of 4000 rpm and an ISO50 taper. The machine is equipped with a 40-tool automatic tool changer and coolant through the spindle for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the KIHEUNG KNC-U1000 ed type milling machine we have for sale. Contact us for further details. • 2.5° head Hfedpfeymmxfsx Ahved • Coolant through spindle • 40 tools in ATC Technical Specification Taper Size ISO 50

Condition: new, – 2 pneumatic clamping devices – Mist lubrication system – Emergency stop – Air blow gun – Documentation Hjdeyug Trjpfx Ahvjfd – 400V

Condition: ready for operation (used), - USED - BRIDGE-TYPE MILLING MACHINE WITH MOBILE TABLE AND MOBILE CROSS BEAM LONGITUDINAL TRAVEL: 9000 mm TRANSVERSAL TRAVEL: 2950 mm VERTICAL TRAVEL: 1250+2200 mm RAPID FEEDS L-T-V: 3 - 3 - 2 m/min TABLE SIZE: 2800 x 8000 (5000+3000) mm Hfodoyru Ncjpfx Ahved MAX ADMITTED LOAD: 64000 Kg SPINDLE: 20 - 600 rpm; 100 kW; 13000 Nm; ISO 60 DISTANCE BETWEEN UPRIGHTS: 3200 mm DISTANCE SPINDLE NOSE-TABLE: 2806 mm OVERALL DIMENSIONS: 21000 x 7800 x 6650 mm ACCESSORIES: GEAR BOX NOTE: No 1 90° HEAD; No 1 REDUCED 90° HEAD; No 1 VERTICAL EXTENSION; No1 TILTING HEAD; 3-STEPS GEAR BOX

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 337- 5000 rpm; 42 kW; 1180 Nm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: PICK-UP ; 12 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION Hfsdpfx Aox Ru Azshvod

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 35 m/min, spindle speed (max.): 5,000 rpm, table width: 2,000 mm, table load: 15,000 kg, table length: 2,000 mm, CNC HEIDENHAIN ITNC530 HSCI ANNO 2016 Longitudinal X-travel: 6000 mm Cross Y-travel: 1250 mm Vertical Z-travel: 2000 mm Rapid feedrates: 35 mt./min. Semi-automatic accessory change Spindle motor power: 34 kW Constant power speed range: 400 – 5000 rpm Maximum torque: 830 Nm Hfodpfx Aeyugbishvsd Maximum feed rate: 35,000 mm/min Acceleration: 1.5 m/s² Maximum spindle speed: 5000 rpm Hydrostatic rotary-translating table TRT15 Table size: 2000 × 2000 mm (15.000 KG) Universal bi-rotary head with thousandth-degree positioning Taper: BT 50 Double cradle for loading/unloading two milling heads, with dedicated management software Chain-type tool magazine, 40 positions, ISO 50 High-pressure coolant system, external/internal through the tool, with paper filter External pressure: 4 bar Internal pressure: 20 bar Through-tool compressed air coolant Chip conveyor with right-side discharge Remote control panel

Condition: like new (used), Year of construction: 2018, operating hours: 170 h, XYZ 500 LR Vertical Machining Centre (170hrs) Siemens 828D Control with Shop Mill, Optimised Digital Servo Drives, Rigid Tapping,Flood Coolant, Worklight, 12 Station Carousel ATC, Easy Clean Swarf Tray, Steel Concertina Guards on all axes, Powder Coated Guarding, Pull Studs, USB Port Hedpfx Ajyuga Sohvsfd Technical Specification: X Axis Table Travel: 500 mm Y Axis Table Travel: 400 mm Z Vertical Travel: 440 mm Table Size: 580 × 400 mm Spindle Centre to Column: 415 mm Spindle to Table: 100 – 550 mm Column Front to Table Centre: 215 – 615 mm Rapid Feedrate: 20 m/min Cutting Feedrates: 1 – 20,000 mm/min Max Table Load: 250 kg Spindle Speeds: 5 – 8,000 rpm Spindle Motor: 15 kW (20 hp) Spindle Taper: BT40 Toolchanger: 12 station carousel Toolchange Time: 8 seconds Max Tool Diameter: 100 mm Max Tool Weight: 7 kg Coolant Tank Capacity: 105 L Ballscrew: Grade C3, 28 mm dia P8 AC Digital Servo Motors: X = 8 Nm, Y = 8 Nm Max Torque Z Axis: 12 Nm, 3,000 rpm Machine Weight: 2,400 kg Footprint: 1,890 × 1,982 × 2,700 mm *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79112 Machine Serial Number: SMB0147 Cost: £29,95000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 1,300 mm, feed length Y-axis: 320 mm, feed length Z-axis: 450 mm, total height: 2,000 mm, total width: 2,100 mm, total length: 2,520 mm, table width: 360 mm, table length: 1,600 mm, type of input current: three-phase, table load: 500 kg, overall weight: 2,800 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Vertical Milling Machine Vertical milling machines are characterized by the ability to move the entire spindle head along the column guideways. This machine is ideally suited for machining tools, fixtures, and engine components. Features Vibration-damping cast iron construction reducing vibrations and oscillations Protective guards compliant with current safety standards Automatic feed on all three axes Rapid feed on all three axes Digital display (DRO) Infinitely variable feed rate Servo drives ensuring precise and safe operation Large worktable with high load capacity Hardened and ground gears significantly reducing noise Central lubrication system Functional control panel for intuitive operation Adjustable head angle allowing various machining positions Table guard available as optional equipment. Technical Specifications Parameter Specification Table size 1600 × 360 mm Maximum table load 500 kg Table swivel angle -45° / +45° X/Y/Z travel 1300 / 320 / 450 mm X-axis feed rate 30–750 mm/min Y-axis feed rate 20–500 mm/min Z-axis feed rate 15–375 mm/min Rapid feed X/Y/Z 1200 / 800 / 600 mm/min T-slots 3 / 18 / 80 mm Spindle taper Horizontal ISO50 / Vertical ISO50 Upper ram travel 550 mm Distance between vertical spindle and table 196–646 mm Distance between horizontal spindle and table 20–470 mm Hfjdpfx Ahsyuculsvod Vertical spindle speed (12) 60–1750 rpm Horizontal spindle speed (12) 60–1800 rpm Vertical spindle motor 4.0 kW Horizontal spindle motor 5.5 kW Feed motor power X/Y/Z 1.5 / 1.5 / 1.5 kW Servo drive 10 Nm Dimensions (L × W × H) 2520 × 2100 × 2000 mm Weight 2800 kg

Condition: new, Year of construction: 2026, 560 mm Hedpfxsyrtyae Ahvsfd 320 mm 400 mm 950x450 mm 1050x320 mm 25-3600 U/min SK 40

Condition: used, Year of construction: 1991, travel distance X-axis: 1,830 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, We offer this used WAGNER WM 2000 milling machine, year of manufacture 1991. Hedpfjyub Scjx Ahvefd Model: WM 2000 Machine serial no.: 9109330 Year of manufacture: 1991 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2003, Tool Milling Machine TOS FNGJ 40 with 3-axis Heidenhain Digital Display Year: 2003 - Travel paths X/Y/Z: 600x400x400 mm - Automatic feeds and rapid traverse on all three axes - Spindle speeds from 63 to 3150 rpm - Tool holder ISO 40 - Hydraulic tool clamping - Fixed table, size 800x400 mm - Vertical and horizontal milling device - Swiveling vertical head with quill Hsdpfx Aeyubpbehvefd - Coolant system Dimensions (LxWxH): 2.5 x 2 x 2.3 meters / Weight: 2600 kg Accessories/options: - Heidenhain digital readout system, 3-axis - Tool holders - Vice - Documentations Under power in our warehouse!

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min Hfjdehhuf Hopfx Ahvsd rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system - Bele

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm Hodpfehik Ezjx Ahvofd weight 3,2 ton. very good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Hfsdsghtvajpfx Ahvjd Weight 690 kg In good condition

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges Hfjdpoxcgtgefx Ahved - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t Hsdpjyrn A Nofx Ahvjfd tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp Hodpfsyrnzfox Ahvjfd

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Hjdpfx Ahsyrnwmevjfd Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: used, Year of construction: 1984, machine/vehicle number: 2804-1181, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 450 mm, table length: 700 mm, rotational speed (max.): 3,150 rpm, rotational speed (min.): 32 rpm, Used DECKEL tool milling machine model FP 3A CNC Table size: 700x450mm, spindle taper SK40 DIN 2080, Travel paths: X/Y/Z = 500/400/400mm, spindle speeds from 31.5 to 3150 rpm (21 working spindle speeds), feed rate 5-1250mm/min, rapid traverse in X, Y and Z 2500mm/min, coolant system and machine feet. Year of manufacture: 1984; the machine was overhauled by Harich in 2010. Hfjdpfxeyrnvve Ahved The machine is located at our site in 71334 Waiblingen-Beinstein and can of course be inspected. Please contact us.

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, FPT Industrie S.p.A. – Travelling Column / Gantry Milling Machine Model: DINOSPIN Year of manufacture: 2019 Serial number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine weight: 44,280 kg Control: Heidenhain TNC640 (15") RAM: 4 GB Hard drive: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block processing time: 0.5 ms Handwheel: Heidenhain HR510 (remote handwheel) Universal milling head (5-axis machining, continuous movement on 2 axes) Max. spindle speed: 18,000 rpm Swivel range C: ±270° Swivel range A: ±185° Max. rotation speed A/C: 30 rpm Working torque A/C: 450 Nm Clamping torque axes: 1,400 Nm Positioning uncertainty: 8 arcsec / scatter: 4 arcsec (VDI/DGQ 3441) Spindle power (S1/S6): 22/33 kW Spindle torque (S1/S6): 84/128 Nm Continuous operation, constant power: 2,500–18,000 rpm Continuous operation, constant torque: 10–2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool changer (overlapped-wheel system with tool-change arm) Hedpfxjyrndme Ahvjfd Magazine capacity: 80 tools Max. tool diameter: 75 mm Max. tool diameter with adjacent pocket free: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm (for 40 tools) Max. tool length: 250 mm (for 40 tools) Tool type: HSK-A63 DIN 69893 Measuring systems Laser tool setter: tool length/radius + tool breakage control (software included) Probe for workpiece measurement/alignment: wireless transmission, probing cycles included in CNC Monitoring Sensor for vibration/collision detection: response time approx. 1 ms Coolant system external/internal (LEU/LEIUHP) Tank capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External cooling: max. 30 l/min, max. 10 bar Through-spindle coolant (IKZ): max. 30 l/min, max. 70 bar Additional options/functions External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: Hjdpohqhlvefx Ahvefd -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: like new (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,200 mm, 1 as-new CNC travelling column bed milling machine Brand: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 2200 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min Hodpfxjwzx Nto Ahvofd CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine CNC-controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Internal coolant supply (IKZ) Indexing clamp Rotary carousel table D=1600 mm, 250 rpm Table area 6000 x 2000 mm Face slide, etc.

Condition: excellent (used), Manufacturer: SHW Machine tools Type: UF 21 / UF 31 Travel distances X,Y, Z: 1000, 700,625mm Control: -Machine 1: Heidenhain TNC 355 -Machine 2: Heidenhain TNC 415 Table: NC rotary table 1100x840mm Automatic swivel head Sleeve 120mm Milling spindle holder SK 50 Speed 2500 rpm As we offer several machines of this series, the pictures advertised are only sample pictures of comparable machines. Please send us your individual (control, table size, tilting & tilt) equipment, etc.) request, so that we can offer you a machine suitable for your requirements. MBM Maschinenservice & Gebrauchtmaschinen GmbH, is an independent specialist for SHW milling machines. Our main focus lies in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Our services: - Used machines - Spare parts - Customer Service - Machine Service - Machine overhauls - Control system modernisation Hedpfoftc Uxjx Ahvsfd

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin Hfsdpfovfm I Tsx Ahvjd We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: excellent (used), Year of construction: 2016, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (headstock vertical): 1,300 mm - Z-axis (headstock horizontal): 750 mm Control system - CNC control: Siemens 3 M Conversion to Heidenhain TNC 415 possible Automatic swivel head Hfjdpjh Rh T Hjfx Ahvod (change between horizontal and vertical machining) quill 120mm Milling spindle holder SK 50 speed 2500rpm Year of manufacture 1994 - 2016 general overhauled Stepless NC rotary table - Rückle PKTF 55 - Clamping surface: 1500 x 1250 mm About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main focus is in the area of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls - Control system modernization