Used Hille for sale (3,034)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: A.100765.01, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller model: SIEMENS SINUMERIK 840 D, spindle speed (max.): 6,000 rpm, The machine spindle was overhauled in 2015! TECHNICAL DETAILS Travel X-axis: 1200 mm Travel Y-axis: 1000 mm Travel Z-axis: 1200 mm Spindle speed: 25 - 6,000 rpm Max. torque: 900 / 1130 Nm Number of tables: 2 Maximum interference diameter: 1200 mm Ncjdpfx Aheytfmzjvop Table rotation speed: 15 rpm Table clamping torque: 10,000 Nm Tilting moment: 29,000 Nm Distance between spindle nose and table: 130 mm Pallet dimensions: 800 x 630 mm Pallet change time: 16 s Transport weight: 1,200 kg Number of tool stations: 250 Maximum tool diameter: 125 mm Diameter with adjacent stations free: 250 mm Maximum tool length: 650 mm Maximum tool weight: 40 kg Tool change time: 2.5 - 4.5 s Average chip-to-chip time: 7 - 9 s Tool holder: SK 50 DIN69871 Feed rate: 1 - 36,000 mm/min Rapid traverse: 36 m/min MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 10,000 x 6,000 x 3,800 mm Machine weight: approx. 30,000 kg Operating hours: approx. 100,000 h (The machine was operated in 2-shift + ghost shift mode. The previous owner estimates approximately 100,000 hours over 20 years of operation.) EQUIPMENT Direct measurement via glass scales Coolant system 1,250 L High-pressure pump 11 bar (coolant) Through-spindle coolant 25/50 bar (TSC) Blow-out device for spindle taper Paper filter system Chip conveyor Pallet changer 2 pallets Set of tool holders Coolant/mist extraction Touch probe

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,716 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: SIEMENS, controller model: 840 D, spindle motor power: 37,000 W, number of axes: 4, This 4-axis HULLER HILLE NBH 230 horizontal machining center was manufactured in 2009. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this HULLER HILLE NBH 230 horizontal machining center. Contact us for more information. Additional equipment • Machine includes a Kirchgässner pallet storage. Nsdpfxjx D Rn Rj Ahvscp • Magazine Capacity: 32 Euro pallet spaces for raw material • Pallet Size: 630x800 mm • Pallet Spaces: 32 Extra Information Machine still under power

Condition: good (used), Year of construction: 2008, Ref. -No.: 10335 Manufacturer: HüLLER HILLE Type: NBH 170 Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Ncodpfx Aheym I U Ujvsp Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: RPM Rapid Traverse: 60 m / min Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Further information: Coolant system = 1250 l

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 630 mm z-travel 800 mm Control Siemens type 840 D size of pallet 500x630 mm numbers of pallets 8 360 ° turning speeds 6000 U/min Table load 800 kg spindle taper ISO 50 Feed 1-36000 mm/min Cooling through the spindle 50 bar weight of the machine ca. 19,5 t dimensions of the machine ca. 8x7x4,2 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Ncsdeyqu Uvepfx Ahvsp More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2005, x-travel 1800 mm y-travel 1600 mm z-travel 1400 mm Control Siemens type 840 D size of pallet 1000x1250 mm numbers of pallets 2 360 ° Table load 3500 kg workpiece swivable +/- 2100 mm positioning accuracy 0,01 mm Ncodpfx Ahsyquvmovsp spindle taper ISO 50 transmission ratio 2 Torque 1130 NM turning speeds 25-10.000 U/min Feed 1-40.000/50.000 mm/min weight of the machine ca. 43 t dimensions of the machine ca. 11x9x34,5 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: A.1003260.01, Machine designation: Machining center Manufacturer: Hueller Hille Model: NBH230 Year built: 2009 Serial number: A.1003260.01 Ncsdjwpi Ucopfx Ahvop Control: Sinumerik 840D Travel paths: X-axis: 1200 Y-axis: 800 Z-axis: 1200 Tool holder: HSK100 Spindle speed: 10000 rpm Feed (X-Y-Z axis): 1-60000 mm/min Rapid traverse (X-Y-Z axis): 60m/min Rapid traverse (B-axis): 15 rpm Tool palette: 630x800mm NC rotary table: 0.001 deg Tool magazine: 3 cassettes of 50 tools each Measuring system: Direct with incremental scale Position uncertainty: 0.007mm Position deviation: 0.004mm Tool change time: 2.5-4.5 sec Chip-to-chip time: approx. 6.2 sec Pallet change time: 14.5 - 17 sec Connected load: 69 kW Compressed air system: 5 bar Coolant system: approx. 1250l Chip conveyor with inclined discharge: 1200 mm height

Condition: new, Year of construction: 2011, Lot of Hüller Hille nb-h95, nb-h135 spare parts 2 pallets and 2 mesh boxes filled with new spare parts for these two machine types. The parts come from the maintenance department of a company that operated 12 of these machines. As such, only components with a proven history of wear or failure have been selected, making this an ideal stock for ongoing maintenance needs. The price is for the entire lot, but individual sales are also possible. Collection and shipping by freight forwarder available. Nodpfxsdr Shgs Ahvjcp

Year of construction: 2010, condition: new, 1. BAZ HUeLLER HILLE nb-h260/nb-h290 My.ca.2010 Ncsdpfxscrk Ivj Ahvsp As good as new in original condition. 1.ball screw Y-axis new. desweiten other parts On request.

Condition: used, Year of construction: 2007, 4-axis CNC horizontal milling machine Hüller Hille BlueStar5, year of manufacture 2007. Automatic pallet changer with 2 exchange pallets, each with 4 vices (125mm), 4 additional exchange pallets (one with a mineral cast clamping tower), Renishaw measuring system, high-pressure coolant system with additional filtration, coolant and air through the spindle, 40-position tool magazine BT40. Ncodpfxsw D Sbns Ahvsp

Condition: ready for operation (used), Year of construction: 2004, Travel X/Y/Z: 700mm/630mm/700mm, max. workpiece dimensions X/Y: 750mm/700mm, pallet clamping surface X/Y: 500mm/500mm, max. pallet load capacity: 500kg, tool holder: SK40, feed rate: 50m/min, rapid traverse: 50m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.001mm, spindle speed: 12000rpm. Machine dimensions X/Y/Z: approx. 4000mm/3800mm/3000mm, weight: approx. 12500kg, control: Fanuc Series 21i-MB, operating hours: approx. 42400h, spindle hours: approx. 11500h. Includes Renishaw OMP 40-2, central lubrication, and 4 pallets. Documentation available. On-site inspection possible. Expected to be available from January 2026. Ncedexuvpbjpfx Ahvop

Year of construction: 1982, condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate comes from: a Hüller Hille milling machine type nb-h 70 -Width: 475 mm -Length: 500 mm -Height: 68 mm -Plate: is solid -Groove width: 12 mm -Dimensions: 500/475/H68 mm Ncodpjfhtp Sjfx Ahvep -Weight: 90 kg

Condition: used, Year of construction: 2002, turning diameter 1000 mm swing diameter 1250 mm Njdpfxsxfwgpj Ahvjcp turning height 1000 mm Control Siemens 840D total power requirement 110 kW weight of the machine ca. 25 t

Condition: used, Year of construction: 2005, Technical details: x-travel: 1800 mm y-travel: 1600 mm z-travel: 1400 mm B-axis (table): 360° size of pallet: 1000 x 1250 mm workpiece swing dia.: 2100 mm workpiece weight: 3500 kg spindle taper ISO: 50 spindle drive motor: 37 kW spindle turning speed range: 25 - 10000 U/min feed range: 40/50 m/min rapid power traverse circular: 10 U/min total power requirement: 90 kVA weight of the machine ca.: 43 t dimensions of the machine ca.: 11 x 9 x 4,5 m Machine with SIemens 840 D control for 4 axis Ncjdpfsvgcrkjx Ahvjp - full B-axis - palette changer - tool changer for 150 tools - coolant device with coolant through spindle - chip conveyor *

Condition: used, Year of construction: 2007, Technical details: x-travel: 700 mm y-travel: 630 mm z-travel: 700 mm weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,90 x 2,90 m pallet size:: 500 x 500 mm tool taper: SK 40 Ncedpfx Aew Dufcjhvep Tool taper: HSK-A 63 turning speed range: 10.000 U/min

Condition: good (used), Year of construction: 2004, Hüller Hille Bluestar 5, year of manufacture 2004, Fanuc 21 Ti - MB control, travel X/Y/Z 700/630/700 mm, 2-pallet changer, pallet size 500 x 500 mm, rotary table C-axis 0.001°, 40-position tool changer, BT 40 spindle taper, spindle speed up to 10,000 rpm, feed rates X/Y/Z up to 50 m/min, internal coolant 40 bar, chip conveyor, max. table load 500 kg. Ncsdoxwvg Sspfx Ahvep

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: A.1001840.01, travel distance X-axis: 700 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 700 mm, total height: 2,900 mm, total length: 4,200 mm, total width: 2,900 mm, overall weight: 12,500 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Working Area Max. workpiece contour: 750 × 700 mm Transport load per pallet: approx. 500 kg Clamping surface pallet DIN 55201, Form A2: 500 mm x 500 mm Distance table center to spindle nose in Z: 100 mm Distance table top to spindle nose in Y: 85 mm Working Spindle Standard tool holder: SK 40 Ball bearing in front bearing: 80 mm Standard speed range: 10,000 rpm Feed Feed rate X-, Y-, Z-axis: 1 – 50,000 mm/min Feed force X-, Y-, Z-axis, 40% duty cycle: approx. 5,000 N Rapid traverse X-, Y-, Z-axis: 50 m/min Acceleration: approx. 7 m/s² Ball screw (lead): 40 (20) mm Tool Magazine Chain magazine 40 tool positions: max. quantity 40 Tool change position: via spindle Max. tool diameter: 80 mm Max. tool length: 350 mm Max. tool change time: 2.5 s MACHINE DETAILS Ncjdewx Ed Espfx Ahvep Electrics Operating voltage, three-phase, frequency: 400 V, 50 Hz Control voltage, frequency: 230 V, 50 Hz Connected load: 27 kVA Fuse protection: 80 A

Condition: good (used), Year of construction: 2002, functionality: fully functional, 2-axis machine. Largest turning diameter: 1000 mm Largest swing diameter: 1250 mm Vertical slide stroke: 1000 mm Ncjdorx R S Uepfx Ahvop Stroke horizontal slide: 1250 mm Spindle head according to DIN 55026: Size A 15 Spindle Ø in front bearing: 240 mm Drive 100% / 40% ED: 4.4 / 5.5 kW Speed range 1: 6.3 90 224 rpm Speed range 2: 25 360 900 rpm Feed rates: max. 14000 mm/min Rapid traverse: max. 20000 mm/min Turret head: 4 stations Round shank: Ø 60 mm according to DIN 69880 Connected load: 110 KW Weight: 25 tons The machine is still under power. Inspection possible at any time by arrangement. Price ex location. We will be happy to enquire about the costs for free truck.

Condition: used, Year of construction: 2003, x-travel 1000 mm y-travel 800 mm z-travel 800 mm control SIN840D speeds 10 - 10.000 U/min feed range 1 - 36000 mm/min B - axis 360 x 1 ° repeating accuracy + / - 3 " surface area 2 x 500 x 630 mm tool diameter 100 mm workpiece length 650 mm workpiece weight max. 40 kg tool taper DIN 69871 SK 50 workpiece weight 800 kg tool magacine with 100 Plätzen wotkpiece diameter with 2 vacant positions 325 mm Chip to chip time ca. 8,00 sec. change time of pallets ca. 12,00 sec total power requirement 65,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 7,80 x 3,50 x H3,40 m Horizontal machining center with SIEMENS SIN840D control. NC-rotary table; chip conveyor; coolant-unit; coolant through the spindle Njdpfxowhqtko Ahvocp Magazine with 2 cassette à 50 pockets.

Condition: used, Year of construction: 2005, x-travel 700 mm y-travel 630 mm z-travel 700 mm Control SIN 840 D SIEMENS spindle turning speed - stepless 10.000 U/min power capacity at 100 % load 13,00 kW feeding force at 40 % ED 18,00 KW tool taper HSK-A63 spindle diameter in front bearing 80 mm feed X/Y/Z/-axis 1 - 50.000 mm/min rapid traverse X/Y/Z 50,00 m/min feed capacity X/Y/Z 5,00 kN B - axis 360 x 1 ° B-axis 30,00 U/min size of pallet 2x 500 x 500 mm workpiece weight 500 kg 0 700 x 700 x 750 mm tool magacine with 40 Plätzen tool length - max. 350 mm tool diameter 80 mm tool diameter with 2 vacant positions 150 mm weight of tools max. 10,00 kg Chip to chip time 4,00 sec. total power requirement 24,00 kW weight of the machine ca. 15,00 t dimensions of the machine ca. 4,00 x 4,00 x H3,00 m Horizontal machining center with SIEMENS SIN840D (PCU50); chip conveyor, coolant-unit, coolant throu the spindle 40bar at 23 l/min; Ncedpfx Aowhqtqehvop

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 700 mm, workpiece weight (max.): 500 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel Travel X: 700 mm Travel Y: 630 mm Travel Z: 700 mm Spindle Spindle speeds: 10,000 rpm Drive power 100% duty cycle: 13.00 kW Drive power 40% duty cycle: 18.00 kW Spindle diameter: 80 mm Workpiece Pallet size: 2 x 500 x 500 mm Workpiece weight: 500 kg Minimum workpiece dimensions: 700 x 700 x 750 mm Tools Tool holder: HSK-A63 Tool magazine capacity: 40 positions Max. tool length: 350 mm Tool diameter: 80 mm Tool diameter with free adjacent spaces: 150 mm Max. tool weight: 10.00 kg Feed rate X/Y/Z: 1 - 50,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z: 5.00 kN B-axis: 360 x 1 B-axis speed: 30.00 rpm Chip-to-chip time: 4.00 s MACHINE DETAILS Control: SIEMENS SIN840D (PCU50) Total power requirement: 24.00 kW Dimensions & Weight Dimensions (approx.): 4.00 x 4.00 x 3.00 m Machine weight (approx.): 15.00 t EQUIPMENT Chip conveyor Ncodoxf Dckepfx Ahvsp Gravity band filter system High-pressure coolant system 40 bar at 23 l/min

Condition: good (used), Year of construction: 2001, HÜLLER HILLE HESAP, type DV120, serial no.: A.1000439, year of manufacture: 2001, recorded operating hours: 92,566, max. workpiece diameter: 1,000 mm, max. turning length: 1,000 mm, X-axis: 870 mm, Z-axis: 1,020 mm, spindle speed: 25 - 900 rpm, 2 tool magazines: 1x 12 – 2x 24 positions, workstation 0950, control system: Siemens Sinumerik 840C, extraction unit: Keller. Nsdpfx Ahowyxbyevocp

Condition: used, Field roller, grassland roller, meadow roller, soil roller, roller -for hill bed: adjustable increase -Diameter: 750 mm Nedob A I Tzepfx Ahvscp -Working width: 2000 mm -Equipment: Can be filled with water

Condition: used, Spacer board hill Nedpfx Ahew Tzgwevecp

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Njdpsua Iuljfx Ahvocp Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: used, Year of construction: 1980, functionality: fully functional, Spindle press by Hiller & Lutz Year of manufacture: 1980 Fully functional In good used condition Technical details: The Hiller & Lutz HP71 is a classic, robust manual spindle press (also referred to as an arch press), widely used in metalworking shops, workshops, and industrial environments for straightening, bending, pressing-in, or punching operations. Here are the standard technical specifications for this model (values may vary slightly depending on year of manufacture): - Press force: approx. 20 to 25 tons (the "71" model number typically refers to frame size/width; actual force depends on spindle pitch and flywheel diameter) - Spindle diameter: approx. 70 – 80 mm - Stroke: approx. 200 – 300 mm (depending on spindle length) - Throat depth: approx. 250 – 300 mm (distance from spindle center to frame) - Table size: approx. 500 x 400 mm - Maximum opening height: approx. 400 – 500 mm (with spindle fully extended) - Flywheel diameter: approx. 1,000 – 1,200 mm Machine features: - Design: Heavy-duty C-frame made of cast iron for high rigidity - Drive: Manual operation via large flywheel; energy is generated through the wheel’s inertia during operation - Table: Usually features a central through-hole and T-slots for tool mounting - Weight: Net weight typically ranges from 700 kg to 950 kg, ensuring stable setup (usually requires bolting to the foundation) Nodpjwxyn Eefx Ahvocp Machine dimensions (main body): - Height: approx. 1,800 mm to 2,100 mm (depending on spindle position) - Width (frame): approx. 500 – 600 mm - Depth (base): approx. 800 – 1,000 mm Additional note: Dimensions depend on whether only the machine body or the total required space including flywheel overhang is considered.