Condition: good (used), Year of construction: 1998, Used punching and nibbling machine from Euromac Gkedpfxex Hizqj Ag Djf Type CX 750 30 Capacity 30 tons Includes multi-tool and various accessories

Condition: excellent (used), Positioning ring, clamping ring, clamping pallet, short taper, shuttle table -Type: SRB 120 -for: NSA plus static tethering station -both sides: ground -Clamping rings: with ground short cone for positive locking connection of the clamping pallets or devices with the clamping modules. -Form-fit connection: between clamping pallet and NSA plus clamping station. -Quantity: 25x available Price: per piece Gkodpodkpbfsfx Ag Dof -Dimensions: Ø 118/H19 mm -Weight: 0.8 kg

Condition: excellent (used), functionality: fully functional, Schaublin 135 High Precision Lathe with 3-Axis Digital Readout (ELESTA) and Accessory Cabinet in Excellent University Condition! Technical Data: - Centre Height: 135 mm - Distance Between Centres: 630 mm - Swing Over Bed: 315 mm - Spindle Nose: Camlock D1-4 - Spindle Bore: 40 mm - Longitudinal and Cross Feeds: 0.025–0.35 mm/rev Godpfxox Hivne Ag Dskf - Metric Threads: 0.25–14 mm - Tailstock Taper: MK3 - Infinitely Variable Speeds: 55–3000 rpm - Total Power Requirement: 4.45 kW - Weight: approx. 1,200 kg Accessories: - 3-Axis Digital Readout (ELESTA) with Heidenhain Scales - Accessory Cabinet including: - 160 mm 3-jaw chuck with 2 sets of jaws - Multifix B, 3 tool holders - Internal and external quick-change collet system - Change gears - Eccentric chuck - Faceplates - Fixed and travelling steadies - Coolant system - Centre points - Operating manual - And much more About the Machine: For sale is a Schaublin 135 high precision lathe. The machine is in very good condition, comes from a university, and has seen very little use. It is equipped with a 3-axis digital readout and a wide range of accessories. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1473114, This filter and cooling unit was previously used for two Starrag Heckert machining centers (lot 2770011 and 12). Order number: 2153651 Control voltage: 24 V DC Connection voltage: 3×400 V + PE / 50 Hz Connected load: 6.30 kW Fuse: 50 A Country of manufacture: Germany Additional unit: Manufacturer: BKW GmbH, Wolfschlugen Model: WRK3C-2KK2P Year of manufacture: 2005 Refrigerant: R134a Permissible operating pressure: 24 bar Voltage: 400 V / 50 Hz Output: 5.02 kW Control voltage: 24 V DC Country of manufacture: Germany Gkedox Hinkopfx Ag Dsf

Condition: used, total height: 1,850 mm, total width: 1,200 mm, total length: 1,300 mm, Empty weight: 1.050 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 3.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 400 - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 400 - Table length [mm]: 750 - Table width [mm]: 300 - Tool holder: SK40 - Main spindle power [kW]: 2.2 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 1600 - Options: Digital readout - └ Type of digital readout: Heidenhain Godpsx Hiibjfx Ag Dekf - Transport dimensions: 1300mm x 1200mm x 1850mm (l x w x h) - Transport weight [kg]: 1050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Oil mist extractor, emulsion mist separator, used equipment Manufacturer: IFS Industriefilter Service GMBH Type: IFM 2000 Overall Dimensions: Width: 1110 mm Depth: 700 mm Height: 870 mm Weight: 110 kg Gjdpfxsx Hh Ngj Ag Dskf Year: 2001 Electrical Data: 400V, 1.5 kW, 3.1 A

Condition: good (used), Year of construction: 2018, Used horizontal bending machine from Simasv Type T22 Normale Gkodpox Hihkofx Ag Def Capacity: 22 tons Includes side stop and various bending tools

Condition: good (used), Boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, spindle tool, facing and boring head -Boring head: MK5 holder 5 pieces -Tool holder: dimensions see photos Gkedpsxc Uvpofx Ag Def -Shipping/Price: complete -Transport dimensions: 440/260/H70 mm -Total weight: 16.6 kg

Condition: used, Year of construction: 2012, machine/vehicle number: IntNr230381, used CNC Tsugami HS2075AX with B-axis, year of manufacture 2012 Operating hours: 7,200 Control: Fanuc 31i-A Maximum machining length: 250 mm Number of controlled axes: 7 (up to 5-axis simultaneous machining) B-axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: available on both main and counter spindle Number of linear tool carriers: 2 Total number of tools: 35 Dimensions (LxWxH): 2,110 x 1,200 x 1,885 mm Weight: 3,300 kg Convertible between long and short turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear turret with Y-axis Cross-drilling on rear side Chip conveyor Fire suppression system FMB Minimag 20 bar feeder, year 2012 The machine can be inspected under power by prior arrangement. Gkjdpfx Aex Hib Reg Def Technical data and information are subject to change and error; prior sale reserved.

Condition: used, Year of construction: 2012, operating hours: 44,900 h, functionality: fully functional, machine/vehicle number: 16504, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: Godpfx Agsx Him He Djkf -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This machine used a single cooling unit together with another machine (lot 2770012). The cooling unit (lot 2770249) is offered separately. This machine does NOT include a cooling unit. The machine/plant does not include any product-related tools, fixtures, or grippers (robots). Spindle hours approx. 25,600 Operating hours approx. 44,900

Condition: used, Year of construction: 1995, total length: 3,900 mm, total width: 2,100 mm, total height: 1,660 mm, Weight: 5.500 kg - Year: 1995 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Gkjdpfx Ajx Hih Rjg Djf - Serial number: 2050 - Drive system: Conventional - Drive type: Hydraulic - Power [kW]: 18.5 - Max. sheet thickness [mm]: 8 - Max. working width [mm]: 3060 - Backgauge depth [mm]: 1000 - Transport dimensions: 3900mm x 2100mm x 1660mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, operating hours: 32,000 h, machine/vehicle number: IntNr231374, STAR SA 16R CNC sliding head lathe, year of manufacture 2007 CNC control: FANUC 18i-T Operating hours: 32,000 Technical specifications: - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE Gkjdsx Hiagopfx Ag Dof - Maximum bar diameter: 16 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 SUB SPINDLE - Maximum bar diameter: 12 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 FMB Minimag bar feeder The machine can be inspected under power by appointment. Subject to prior sale. Technical specifications and details are subject to change and error.

Condition: excellent (used), Year of construction: 2007, operating hours: 11,500 h, functionality: fully functional, MORI SEIKI CNC Lathe Model: NL1500MC/500 Turret: 16 position VDI 30 Description: Single-spindle, single-turret CNC lathe with driven tool holders, C-axis, and tailstock Gsdpfx Aox Hichjg Dokf Year: 2007 Production hours: 11,500 hours Recent key service interventions: 14/02/2025: geometric check 23/10/2024: clamping solenoid valve replacement 22/02/2024: screen replacement 04/01/2022: power inverter replacement Supplied tooling: 5 square turning holders 20 mm 5 drilling holders D25 and D32 3 axial driven tool holders 2 radial driven tool holders Machine in very good condition, video available

Condition: good (used), Bezel, setting stick, lynette -Manufacturer: Meuser, steady rest with coolant connection from lathe M4L -Max. passage: Ø 500 mm -Peak height: 390 mm -Technical drawing: see photos -Dimensions: 840/140/H850 mm Godpfsh Tr E Hsx Ag Dskf -Weight: 98 kg

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231109, Technical data: first-class condition, only approx. 9000 operating hours Fanuc, high-performance CNC control series 31i-B5, 3-channel control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3), Rapid traverse speed 30 mm/min, Bar diameter max. 38 mm, Turning length max. 350 mm, Main spindle, max. speed 7,000 rpm, C-axis 0.001 degrees, Main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 degrees, Gedpfxsx Hib Do Ag Dekf Counter spindle drive power 7.5 kW Turret Speed max. 5,700 rpm, (with corresponding tool holder also higher) Turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bushing unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 Coolant: Oil Weight: 6.25 tons Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information as well as prior sale reserved! Technical data: first-class condition, only approx. 9000 operating hours Fanuc, high performance CNC control series 31i-B5, 3-channel-control, 3 turrets, 12 CNC axes, (X1/Z1/Y1/C1/X2/Y2/YA2/C2/X3/Z3/Y3), rapid traverse speed 30 mm/min, bar diameter max. 38 mm, turning length max. 350 mm, main spindle, speed max. 7,000 rpm, C-axis 0.001 deg, main spindle drive power 11 kW Counter spindle speed max. 7,000 rpm, C-axis 0.001 deg, counter spindle drive power 7.5 kW Turret speed max. 5,700 rpm, (with appropriate tool holder also higher) turret drive power 4 kW Tool holder stations for a total of 30 (10 per turret) (prepared for internally cooled tools) Tool holder set, (non-driven) Guide bushing unit (tension system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit) type Müller combistream CS 3 coolant application: oil Weight: 6,25 to Dimensions: (LxWxH) 3477x1860x1865 mm The machine can be inspected under power by appointment. Changes and errors in the technical data and information and subject to prior sale!

Condition: used, Year of construction: 2011, operating hours: 50,500 h, functionality: fully functional, machine/vehicle number: 16520, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This unit shared a single cooling unit with another device (lot 2770012). This unit does NOT include a cooling unit. Gkjdpox Himtefx Ag Djf The machine/system does not include product-specific tools/fixtures or grippers (robot).

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table Gjdpfx Aoxm Sagjg Dskf -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Condition: used, Year of construction: 1999, operating hours: 78,000 h, machine/vehicle number: IntNr231160, IntNo231160 Machine type CNC sliding headstock automatic lathe Manufacturer STAR Model SV-20 year of construction 1999 Condition very good (used) Very well maintained machine directly from the user Machine has only run with oil Gksdpfxsx Hibke Ag Dsf Operating hours around 78,000 hours FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / C2), Bar Ø max. 20 mm Turning length max. 205 mm / 195mm, Main spindle, max. speed 10,000 rpm, C-axis, Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis, 4-fold tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders, quills, parts conveyor belt Tank capacity 170L Coolant used in the machine: oil Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm Year of construction 1999 Fire extinguishing system Kraft & Bauer / GUT fire protection Mayfran chip conveyor The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved! IntNo231160 Machine type CNC sliding headstock automatic lathe Manufacturer STAR Model SV-20 year of construction 1999 Condition very good (used) Very well maintained machine directly from the user Machine has only run with oil Operating hours around 78,000 hours FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / C2), Bar Ø max. 20 mm Turning length max. 205 mm / 195mm, Main spindle, max. speed 10,000 rpm, C-axis, Counter spindle with collet chuck, max. speed 10,000 rpm, C-axis, 4-fold tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders, quills, parts conveyor belt Tank capacity 170L Machine coolant: oil Loading magazine FMB Turbo 3-26 /3200/A / from Ø3- Ø26 mm Year of construction 1999 Fire extinguishing system Kraft & Bauer / GUT fire protection Mayfran chip conveyor The machine can be inspected by appointment. Changes and errors in the technical data and information as well as prior sale reserved!

Condition: used, Year of construction: 2013, operating hours: 45,500 h, functionality: fully functional, machine/vehicle number: 16546, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pallet Changer: -> Included Spindle: -> Tool holder: HSK63 -> Speed: 20,000 rpm Linear Axes: -> X-axis: 750 mm -> Y-axis: 750 mm -> Z-axis: 725 mm Tool Changer: -> 60 positions This machine is equipped with a coolant filtration system with chiller. • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Model: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) • Year of manufacture: 2012 Gksdpfxex Hilvs Ag Dsf • Serial numbers:  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical connection: 3×400 V / 50 Hz • Control voltage: 24 V DC • Power consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse protection: 16 / 25 A (Knoll), 16 A (Hyfra) • Cooling capacity (chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. pressure: 20 bar • Weight (with coolant): 140 kg Note: Machine/asset does not include any product-related tools, fixtures, or robot grippers. Spindle hours: approx. 9,300 Operating hours: approx. 45,500

Condition: good (used), Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / technical. drawing -Dimensions: 1700/580/H700 mm Gsdpfekvrptex Ag Dekf -Weight: approx. 525 kg

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231209, Item Description: Used LNS Express 220 Bar Feeder Year of Manufacture: 2007 Type: Bar Feeder Technical Details: Diameter Range: 2 mm to 20 mm Channel Diameter: 22 mm Maximum Bar Length: 3,000 mm Installation Dimensions (L × W × H): 3,970 × 480 × 1,250 mm Weight: approx. 850 kg Condition: Age-related wear and tear in line with the year of manufacture. Plexiglass cover is damaged; no other known faults. Special Features: Gkjdpfx Ajx Hia Teg Def Stability and Precision: Structurally identical to the Express 220 and 320, built on the same base as the Express 332. Provides optimal stability and vibration-free operation, ensuring high surface quality and dimensional accuracy at maximum productivity levels. Loading Capacity: Integrated loading ramp with a capacity of 240 mm allows for long periods of autonomous operation. Fast Diameter Changeover: Quick retooling of the channel guide in less than 2 minutes. Complete change of the guide elements possible in under 8 minutes. Guidance for 2–20 mm Bar Stock: Special channel guide system prevents bars from kicking out. Automatic opening of the channel guide during material feed-through. Summary: The LNS Express 220 stands out with its robust construction, ease of use, and high reliability. This used model, despite age-related wear and minor defects, remains a solid basis for precise and efficient production processes. The machine can be inspected under power by appointment. Modifications and errors in technical data and specifications as well as prior sale reserved.

Condition: used, Year of construction: 2003, operating hours: 43,000 h, machine/vehicle number: IntNr231372, STAR SA 12 CNC sliding headstock lathe, year 2003 CNC control: FANUC 18i-T Operating hours: 43,000 Technical data: Gkjdpfx Aex Hia Hog Dof - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 12 mm - Z-axis travel: 140 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Number of tool stations: 13 COUNTER SPINDLE - Max. bar diameter: 10 mm - Spindle speed: 8,000 rpm - Number of tool stations: 4 Includes FMB Minimag bar feeder. The machine can be inspected under power by appointment. Specifications and details subject to change, error, and prior sale.

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231391, Tornos DECO 10e, built in 2007 Control: Fanuc PNC-DECO Number of axes: 7 Number of spindles: 2 MAIN SPINDLE Max. bar diameter: 10 mm Travel: 66 mm Max. spindle speed: 16,000 rpm Spindle drive power: 3.7 kW C-axis: 0.001° COUNTER SPINDLE Max. bar diameter: 10 mm Max. spindle speed: 12,000 rpm Spindle drive power: 3.7 kW C-axis: 0.001° Part removal Parts ejector Coolant tank LNS Tryton 112 bar feeder with hybrid drum The machine can be inspected under power by appointment. Godpfx Aex Hiayeg Dekf Subject to prior sale and changes or errors in the technical data and specifications!

Condition: used, Year of construction: 1992, operating hours: 83,492 h, machine/vehicle number: IntNr231415, CNC lathe Traub TNS 26 DGY 2 turret, main and counter spindle Year of manufacture: 1992 Machining hours: 83,492 Control: Mitsubishi FR - SF System TX 8F Machine type: Twin-spindle turning center with Y-axis and driven tools Main spindle Bar capacity Ø approx. 26 mm Max. turning length 270 mm Max. spindle speed approx. 7,000 rpm Spindle outer Ø 60 mm Spindle drive power approx. 11 kW Counter spindle Max. bar capacity Ø approx. 26 mm Gkodpfxsx Hiats Ag Dof Spindle speed approx. 7,000 rpm Spindle drive power approx. 5.5 kW Turrets / tool revolvers 2 turret positions (upper and lower, i.e., two turrets) with driven tools Upper turret with Y-axis Tool holder, e.g., to DIN 69880: 25 x 48 and 16 x 16 mm Number of driven tool stations per turret: 12 Max. tool drive speed: 8,000 rpm Tool drive power: 2.6 kW Torque: 4 Nm Main and counter spindle: C-axis Bar feeder: STAMAG DN 26 Chip conveyor: Ruez Documentation/manuals included The machine is electrically and mechanically fully functional and can be inspected under power by prior arrangement. Technical details and specifications subject to change, errors excepted. Subject to prior sale!

Condition: like new (used), Year of construction: 2012, machine/vehicle number: IntNr231419, As-new, completely overhauled CNC 5-axis vertical machining centre DMG DMU 40 eVo linear, year of manufacture 2012, IntNr231419 Control system Brand: HEIDENHAIN Model: 530 Main drive Spindle speed range: 14,000 rpm Number of axes: 5 Travel distances X-axis travel: 400 mm Y-axis travel: 400 mm Z-axis travel: 375 mm Includes: - Automatic tool changer with 120 SK 40 tool holders - Table rotary feed-through for workpiece clamping - Side door for robot loading - Renishaw tool breakage monitoring - Heidenhain measuring probe - High-pressure coolant system (IKZ) with 600 l tank - Emulsion extraction system - Active spindle cooler - Linear drives for X and Y axes - Glass scales The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in technical data and specifications! Gkedpfxex Hiams Ag Dof