Used Manufacturing Facility for sale (40,715)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, overall weight: 16,500 kg, total width: 2,185 mm, total length: 5,563 mm, total height: 2,195 mm, Specification: Maximum sheet size: 740 x 1060 mm Minimum sheet size: 330 x 400 mm Maximum cutting force: 300 tons Mechanical speed, up to 8,000 sheets/hour Blsdpfszt Nbzjx Amren Materials processed: Paper and cardboard: 0.1 - 1.5 mm Corrugated cardboard up to B-flute Equipment: - Steel feeding plate - Lifting suction cups - Transport suction cups - Adjustment of brush and roller position on the delivery table, using a single knob - Touchscreen monitor mounted on the machine - Pneumatic stops at the front guides - Laser sensors on the front guides - Modification of sensors for transparent materials - Pneumatic closing of the frame and die plate - APC System – Automatic Pressure Control System APC1 - automatic control of cutting pressure, allowing for maintaining the same pressure during the die-cutting/punching process. Possibility to set tonnage tolerance and control the sheet count after a certain number of pieces. - Programmable safety clutch for exceeding cutting force - pneumatic - Stabilizing air blast in the cutting section, increasing precision and cutting speed for thin papers - Quick-change tool system in the stripping section – Punching Metal (upper and lower stripping fingers) - Europing Centering System – die-cutting and stripping zone - Automatic non-stop stacking system, with a curtain and programmable number of sheets per stack - Upper curtain air blast in the stacking zone - Slip sheet inserter with batch counter, located in the stacking zone - Spare gripper carriage – 1 unit - Power transformer Delivery time: immediately after acceptance of the commercial terms and payment of the financial amount. This announcement has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2017, machine/vehicle number: 0-261-06-6108, functionality: fully functional, operating hours: 1,532 h, Equipment: CE marking, documentation/manual, The machine is used in a small carpentry workshop and has been continuously maintained. It is currently in daily use, and all its functions are working properly. This is not a machine from a dealer; you can test it while it is in operation at our facility. Key specifications and features: • Manufacturer: HOMAG • Model: KDF 110 • Year of manufacture: 2017 • Operating hours: only 1532 hours • Number of processed workpieces: approx. 103,500 Blodpfxszyck Ae Amrsn • Pre-milling unit • Glue application unit • End trimming unit • Top/bottom edge trimming • Profile/radius scraper • Cleaning/scraping of glue joints • Polishing unit • Touchscreen control • User interface in Hungarian • 400 V / 3-phase The machine is in good technical and aesthetic condition, considering its age. The machine is being sold because we are receiving a new edge banding machine, and it will remain in use until the end of October 2027. We will arrange a meeting in advance with serious potential buyers, and the machine can be viewed and tested while it is in operation at our facility until then.

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 2,900 mm, total length: 5,000 mm, total width: 3,000 mm, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle motor power: 15,000 W, number of spindles: 1, type of input current: AC, Equipment: chip conveyor, documentation/manual, We are offering a machining center from the manufacturer Ibarmia with a controlled 4th axis/rotary table. The machine is in good condition and can be inspected and tested in our facilities while powered on. Manufacturer: Ibarmia Type: ZV25/L16000 Year of manufacture: 2002 Control: GE Fanuc Series 18i-M Technical data: Travel distances X-Y-Z: 1600x410x410 mm Travel distance B-axis: 360*0.001° Rapid traverse X: 40 m/min Rapid traverse Y-Z: 60 m/min Main spindle: Spindle speed: 15,000 rpm Main spindle power: ISO-SK-40 Tool changer: Number of positions: 24 Machining area: Table dimensions: 850x1250 mm Blodpsz Ia U Eofx Amren Internal coolant supply (IKZ) Machine dimensions: 5000x3000x2900 mm Weight: 8,000 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 55 t, Durma IW 55 Combination Machine (Punching and Shearing) For sale: a Durma IW 55 combination machine (punching machine + ironworker-type shear), with a capacity of 55 tons. Well-maintained, fully operational, and available for inspection at our facilities in Zaragoza, Spain. Manufacturer: Durmazlar (Turkey) Type: IW 55/110 Motor: 5.5 kW, three-phase, 50Hz Operating voltage: 400V — Control voltage: 24V Current: 11.5 A — Fuse: 16A Cutting capacities: L-profile at 90° 120x120x10mm, L-profile at 45° 70x70x7mm, flat bar 300x15mm, round bar Ø40mm, square bar 40mm, punching Ø40x10mm Material capacity: up to 45 kg/mm² (65,000 psi) Includes punching and die tooling For technical inquiries or to arrange a visit, please contact us by email. Price: €6,500 (negotiable), VAT not included. Bedpfez Hla Djx Amreln If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2001, functionality: limited functionality, input voltage: 230 V, overall weight: 350 kg, height adjustment type: pneumatic, working width: 600 mm, table width: 600 mm, table length: 650 mm, power: 1.5 kW (2.04 HP), Professional industrial ATMA TY-700H flatbed screen printing machine for sale due to the termination/change of our screen printing activities. The machine comes from our own screen printing facility and was used for professional production work. Details: * Brand: ATMA * Type: TY-700H / AT-TY-700H * Year of manufacture: 2001 * 230 V * 1500 W * Semi-automatic flatbed screen printing machine * Max. printing size approx. 600 × 650 mm * Max. frame size approx. 900 × 1100 mm * Vacuum table * Pneumatic squeegee and flood bar control * Pneumatic screen frame clamping * Vertical lifting of the screen frame * Digital/microprocessor control * Fine adjustment/registration of the printing table * Includes existing squeegees/flood bars and accessories as shown in the photos Bodpfez Hykdox Amreln * Weight approx. 350 kg Condition: The machine has been used professionally in our screen printing facility. We have currently tested it electrically: the machine switches on, the control panel and digital display are working. We have not re-tested the full functionality at this time because compressed air is not available at the current location. Therefore, we are selling it in its current condition, and inspection is of course possible. (Connecting it to a mobile compressor is possible if desired). Due to its size and weight, it can only be picked up. The buyer is responsible for arranging suitable transport. Serious offers are welcome. Location: Eindhoven.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Bsdpfozuukqsx Amreln Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: used, functionality: fully functional, Fully automatic robotic grinding system ROBOTICOM SANDROB with vacuum tables For sale is a used ROBOTICOM SANDROB robotic grinding system with ABB industrial robots and associated vacuum tables. The system was recently dismantled from an existing production facility and is now ready for resale. The system is designed for automated surface finishing. The vacuum tables allow for the fixing of workpieces during the grinding process. Workpiece-specific fixtures support the processing of shaped parts and complex contours. Equipment and features: - ROBOTICOM SANDROB grinding robot system with ABB industrial robots - Vacuum tables with workpiece fixtures and vacuum components - Tool storage and change stations, as shown in the pictures Bljdpfx Amoz Ih Exeron - Existing hose packages and extraction connections - For automated, repeatable grinding processes after appropriate setup and programming Condition: Used, recently dismantled. The pictures show the robots and associated system components. The exact scope of delivery will be specified in the offer. An interesting solution for companies looking to automate their grinding processes or expand existing manufacturing capacity. Price on request. If you are interested, please contact us for further information and to arrange a viewing.

Condition: repair required (used), Year of construction: 2016, operating hours: 90 h, functionality: limited functionality, fuel type: diesel, power: 44 kW (59.82 HP), nominal power: 44 kW (59.82 HP), continuous power: 44 kW (59.82 HP), continuous power (apparent): 55 kVA, Diesel Generator ETT-55E (55 kVA) for Sale Condition: Used. The cooling pump is not working and oil is entering the engine; the oil pump needs replacement. Otherwise in technically good condition. We can start the unit for demonstration. A brand new fuel pump is included in the offer. Manufacturer: ETT – Electrotech Dış Ticaret ve Tekstil Ltd., Turkey. Reliable three-phase diesel generator with automatic control panel and soundproof enclosure. Suitable for both backup power supply and continuous industrial or construction site use. Technical specifications: Model: ETT-55E Operating hours: 90 h Output (Standby): 55 kVA / 44 kW Output (Prime): 50 kVA / 40 kW Engine: Ricardo K4100ZDS (diesel, 4 cylinders, water-cooled) Alternator: WHI224D, brushless, with Automatic Voltage Regulator (AVR) Voltage / Frequency: 400 / 230 V – 50 Hz Current: 79 A Power factor (cosφ): 0.8 RPM: 1500 rpm Cooling: Water Fuel consumption: ~10 L/h (at 100% load) Fuel tank capacity: 260 L (up to 8 hours continuous operation) Dimensions (LxWxH): 2250 × 1000 × 1500 mm Weight: 1100 kg Year of manufacture: 2016 Country of origin: Turkey Controls and features: Automatic DATKOM DKG309 control module Emergency stop button Fuel level, oil pressure, temperature, and voltage sensors Battery charging system Automatic transfer switch (ATS) for mains/generator control Overvoltage, overload, and low oil pressure protection Bedpfx Ajxlngaomreln Soundproof enclosure – reduced noise levels Manual or automatic operating mode Typical applications: Suitable for: - Industrial facilities, warehouses, production plants - Construction sites and mobile workplaces - Backup power for hotels, hospitals, office buildings, or farms A reliable solution for stable and uninterrupted power supply. Feel free to contact us if you have any further questions.

Condition: excellent (used), Year of construction: 2024, operating hours: 6 h, functionality: fully functional, Manufacturer: Spaleck Oberflächentechnik Model: Z1 Year of manufacture: 2024 Used, like new condition Operating hours: 6 h Bledpfx Aez H Rfxomron Technical data according to the manufacturer: Working container volume: 11 l Usable volume: 7 l Turntable speed: approx. 280 rpm Drive power: 0.75 kW Height of working container: 1,000 mm Operating voltage: 400 V, 50 Hz Dimensions (W x D x H): approx. 530 x 950 x 1,350 mm The system has been dismantled and is stored at our facility. An inspection is possible by appointment.

Condition: excellent (used), JD manufacturing kettle crisps batch fryer. Gas fired. 55-60kg every 8-10 mins depending on product. With pumps and Valve systems. For "hand cooked" crisps. Frying area is approx. 1.2 m wide x overall length 3 m. I can supply the whole line for producing crisps 1ton a hour. Bsdpfjz E Skgox Amreln

Condition: used, Year of construction: 2010, operating hours: 7,191 h, functionality: fully functional, machine/vehicle number: W09430219A2D38810, overall weight: 19,000 kg, We are selling our used Doppstadt shredder (year of manufacture 2010) with no warranty of any kind. The machine is ready for operation and is currently used in our facility for shredding disposable pallets and green waste. Bedpfx Aezv Hzwjmrsln

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE Blsdpjzzd Dmsfx Amrsn

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Blodszwdx Nopfx Amrsn Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility.

Condition: excellent (used), Year of construction: 2016, operating hours: 20 h, functionality: fully functional, high-pressure hose length: 20 mm, pressure: 90 bar, fuel: diesel, overall weight: 600 kg, water tank capacity: 1,000 l, temperature: 90 °C, MGC.pl, a company operating since 1995 with over 6,000 completed transactions, offers for sale a professional Heatweed HighSeries 75/30 machine from 2016, designed for weed removal using hot water and surface cleaning. The offered set includes two working nozzles and additional tanks. The model is designed for simultaneous operation by two operators, making it ideal for servicing larger areas, in service companies, municipal plants, and companies involved in green space maintenance. TWO APPLICATIONS IN ONE MACHINE Heatweed uses hot water for thermal weed control, without the use of herbicides. This solution is particularly useful for maintaining sidewalks, squares, parks, cemeteries, and areas around buildings. The device can also operate as a pressure washer for cleaning facades, benches, trash cans, monuments, tombstones, and other infrastructure elements. Pressure and temperature regulation allows the operation to be adapted to the task at hand. TECHNICAL DATA OF THE MODEL Manufacturer: Heatweed. Model: High 75/30 / HighSeries 75/30. Year of the offered unit: 2016. Engine: Kubota, diesel. Possibility of simultaneous operation by two operators. Declared weeding performance: 3750–7500 m² per day, depending on working conditions. Water flow during weed control: 30 l/min. Working pressure during weeding: 0.1 bar. Water temperature during weeding: 99°C at weed level. Automatic temperature control with display. Accuracy of temperature regulation according to the manufacturer: ±0.4°C. Pressure in cleaning mode: stepless regulation up to 90 bar. Water temperature in cleaning mode: adjustable up to 85°C. Number of burners: 2. Fuel tank capacity (engine): 40 l. Fuel tank capacity (burners): 80 l. Standard water tank capacity: 1000 l. Standard working hoses: 2 × 15 m. Two integrated automatic hose reels. Dimensions of the machine itself, length × width × height: 1351 × 1001 × 1314 mm. Machine weight according to the data sheet: 585 kg. Dosing pump for descaling agent. Operation without the need to connect an external generator. Design allowing loading and unloading with a forklift. EQUIPMENT OF THE OFFERED SET Two working nozzles. Additional tanks. Detailed number and capacity of tanks and the composition of accessories to be confirmed during inspection. APPLICATION Weed removal from sidewalks, squares, and pedestrian paths. Maintenance of parks, gardens, and green areas. Maintenance of areas around schools, kindergartens, and playgrounds. Work in cemeteries and municipal areas. Service for housing estates, industrial facilities, and company premises. Washing facades and elements of small architecture. Blsdpfxoz H T A Te Amron Cleaning monuments, tombstones, benches, and trash cans. Professional equipment for a company that wants to expand its offer with hot water weeding and cleaning services. The possibility of operating two operators and the combination of two functions increase the range of applications for the device. The stated price is net and applies to export and for companies. A significant discount is possible for individual customers. We invite you to contact us directly by phone so that you can get your best price.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18031539, workpiece weight (max.): 750 kg, workpiece diameter (max.): 600 mm, total width: 650 mm, total length: 704 mm, total height: 585 mm, empty load weight: 334 kg, input voltage: 400 V, type of input current: three-phase, JAVAC POS-750AC welding positioner for sale. Technical specifications: - Manufacturer: JAVAC - Model: POS-750AC - Year: 2018 - Serial Number: 18031539 - Input voltage: AC 400 V / 50 Hz - Permissible welding current: 400 A / 100% - Table diameter: 600 mm - Hollow shaft: 60 mm - Table speed: 0.12–1.2 rpm - Tilting range: 0–135° Blsdezuyaqjpfx Amren - Max. vertical load: 750 kg - Weight: approx. 334 kg - Approximate dimensions: 704 x 650 x 585 mm Used equipment, sold as is. Currently available for inspection but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift and pallet handling facilities are available on-site. We can load the equipment onto the buyer’s truck. Transportation: Transportation costs are the responsibility of the buyer.

Condition: used, Year of construction: 2018, operating hours: 23,532 h, functionality: fully functional, turning length: 550 mm, spindle motor power: 31,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, torque: 170 Nm, bar passage: 65 mm, total height: 2,490 mm, total length: 6,910 mm, chuck outer diameter: 160 mm, total width: 2,092 mm, bar diameter (max.): 65 mm, spindle nose: 140, overall weight: 9,000 kg, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC lathe, manufactured in 2018, from our own machine inventory. The machine is fully functional and can be inspected and demonstrated in operation at our location. The C200 features extensive equipment, including a main and counter spindle, three tool carriers, and driven tools, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 Bjdpez Hmxnofx Amroln - Year of manufacture: 2018 - Control system: INDEX C200-si based on Siemens Sinumerik 840D SolutionLine - Main spindle D65 - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool carriers - 14 stations per tool carrier - Driven tools - Y-axis on tool carriers 1 and 2 - C-axis on main and counter spindle - Coolant high-pressure supply - Chip conveyor - Part removal / gantry removal system - Interface for bar loader magazine UNIMAG4 - iXpanel operating interface - Connection: 400 V / 50 Hz - Rated power: 54 kW - Connected power: 65 kVA - Rated current: 94 A - Max. fuse rating: 100 A The equipment with three tool carriers, a main and counter spindle, and the existing automation and peripheral technology enables flexible and productive complete machining of series parts. The technical configuration is documented in the original INDEX order confirmation. 20260930101605 Current operating hours according to the machine control system: - Total operating time: approx. 23,532 h - Hydraulic system: approx. 22,288 h - Spindle/drive operating times according to the operating hour counter: - S1: approx. 2,298 h - S2: approx. 4,189 h - S3: approx. 1,954 h - S4: approx. 5,998 h - S5: approx. 8,006 h The machine is currently located at our facility and can be inspected and demonstrated in operation after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed list of equipment upon request.

Year of construction: 1970, condition: used, Machine description This used MAPE NL300 pedestal grinder is a heavy duty industrial bench grinder designed for metal sharpening and deburring tasks. Offered for sale by All Metal, this machine is powered by a 1.75 HP three phase motor running at 1,500 RPM on 220 or 380 V power supply. It features two grinding stations with adjustable work rests with angle indicators for accurate workpiece positioning. The unit comes complete with an external dust collector system connected directly to the wheel guards to ensure clean and safe operation. Applications This second-hand grinding machine is suitable for metal fabrication shops, maintenance facilities, toolrooms, and general engineering workshops. It is used for tool sharpening, manual stock removal, edge chamfering, and deburring of metallic parts after cutting. Designed to process steel, cast iron, and various alloys, it fits perfectly into production lines and maintenance departments requiring reliable manual finishing operations. Bedpfx Aez H Ubqemreln Key features / Advantages The MAPE NL300 double ended grinder stands out for its solid cast iron pedestal construction providing outstanding rigidity and vibration damping. Built by French manufacturer MAPE, renowned for robust machine tools, this equipment guarantees high durability. The integrated dust extraction unit is a major advantage for workspace cleanliness and operator safety. Available at All Metal, specialized in second-hand industrial machinery, this used bench grinder represents a cost effective solution for workshop tool grinding. Diam: 300mm Voltage: 220/380 V HP: 1.75 Extraction: Yes

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 070027, control type: CNC control, punching force: 150 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, overall weight: 8,000 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070027 Year of manufacture: 1994 Max. punching force: 150 kN Machine weight: 8,000 kg Power supply: 380V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Bodpfxez E R S Ao Amreln Comes complete with tooling and cassettes. For reference, standard specifications of this model: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any questions or send further photos/videos of the machine in operation.

Year of construction: 2012, condition: used, Machine Description This used profiling line is equipped with a motorized DIMECO S2971 IP uncoiler, manufactured in 2012. Offered by All Metal, this complete industrial unit is designed for continuous sheet metal processing from coils. The vertical uncoiler, with a weight of 650 kg, features an expansion mandrel for holding the strip. The line includes a feeding station, a multi-head roll profiling bench with a safety enclosure, an elevated control walkway with a centralized control panel, and an automatic discharge station. Bedpfjz H Udfex Amrsln Machine Usage This used profiling machine is suitable for sheet metal processing plants, metal fabrication shops, and manufacturers of metal profiles. It enables the continuous uncoiling, straightening, profiling, and cut-to-length processing of steel strips and various alloys. This equipment is suitable for large-scale production of rails, slides, reinforcements, or custom profiles for the construction, automotive, and metal construction sectors. Special Features / Key Advantages The DIMECO S2971 IP profiling line is distinguished by the quality of design from the French manufacturer DIMECO, a benchmark in strip processing. Its integrated work platform offers optimal ergonomics and excellent visibility of the line. The presence of protective enclosures and a dust extraction system ensures a safe working environment. Available from All Metal, a specialist in used industrial machinery, this profiling line represents a valuable opportunity to modernize a production facility.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Bjdjz D H Dropfx Amreln Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Leoni add-on: Cable set for handling or welding

Condition: used, functionality: fully functional, This used STOW pallet racking system is a compact, high-performance heavy-duty rack designed for industrial storage requirements. The modular high-bay system is ideal for logistics operations, industrial facilities, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet rack solution provides an efficient method for storing Euro pallets and heavy unit loads. PRODUCT DETAILS: - Height: approx. 520 cm - Depth: approx. 110 cm - Length: approx. 10,080 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm (PNB0472) - Beam colour: yellow, painted - Uprights: approx. 520 x 110 cm, pre-assembled - Upright colour: blue, painted - Levels: floor + 2 - Pallet locations: 333 incl. floor positions - Version: Used STOW SCOPE OF DELIVERY: - 037 x uprights (approx. 520 x 110 cm), pre-assembled - 144 x beams (approx. 270 x 12 x 5 cm) PNB0472 - 288 x locking pins Price: €8,430.00 net €10,031.70 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery within Germany through our partner forwarding company – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding quotation tailored to your individual requirements. Whether you need a new installation, modification, or extension, we offer expert advice for your racking configuration. SHOWROOM: Feel free to visit our showroom! On-site, you can get a comprehensive impression of our pallet racking, storage racks, and additional solutions. Many systems are assembled and available for direct demonstration. Our specialist consultants are happy to answer your questions and offer tailored advice – we look forward to your visit! Bodpfx Amez Hiw Hjroln Haven’t found the right solution yet? Visit our website for a quick overview of many current offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone call. Our telephone number can be found on our company page. ☎️ We are available from Monday to Friday, 08:00 to 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, For sale is a machinery package consisting of 10 robot arms from the manufacturer ABB, along with the necessary accessories! The package is composed as follows: 8x Welding robots for external connection 2x Handling robots 10x Control cabinet 10x Main power cable for robot cabinet 10x Communication cable for robot cabinet 10x Panel with connection cable to the cabinet 1x 40" HC sea container TECHNICAL DETAILS Reach: 2.55 m Handling capacity: 235 kg Center of gravity of the payload: 300 mm Wrist torque: 1,324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm MACHINE DETAILS Control cabinet type: IRC5 M2004 Operating panel: FlexPendant Operating panel model: DSQC 679 Blsdpfxjz D H Hys Amren Input voltage: 3 × 400 V AC Frequency: 50–60 Hz Current consumption: 20 A Operating hours: between 28,500 and 39,000 hours EQUIPMENT Cable set for main connection cabinet–robot Leoni mounting Cable set for handling or welding Note regarding dismantling and loading: As can be seen in the pictures, the manipulators are located in the 40" HC container. The robots are screwed onto the pallets (with 2 screws each), and the control cabinet is secured to the pallet with lashing straps. Further securing/lashing must be carried out by the buyer.

Condition: good (used), functionality: fully functional, Measuring devices from the dismantling of a battery cell manufacturing facility. Sold individually or as a package. HIOKI 3153 automatic insulation/dielectric strength tester - AC/DC HIOKI BT3562A - Battery tester, 100 V, 3 mOhm Bledoz Hbfvspfx Amrjn HIOKI BT3563A - Battery tester, 300 V, 3 mOhm HIOKI DM7275-01 - Precision DC voltmeter

Condition: used, functionality: fully functional, Year of construction: 1994, actuation type: hydraulic, cutting angle (max.): 1 °, stroke rate (min.): 6 1/min, stroke rate (max.): 10 1/min, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, input voltage: 380 V, oil tank capacity: 130 l, overall weight: 22,000 kg, Equipment: CE marking, safety light barrier, RICO HGR 606 hydraulic guillotine shear For sale: a RICO HGR 606 hydraulic guillotine shear (manufactured by Tomas Castro Silva, Lda., Portugal), year 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Bedpfsz Hk R Isx Amrsln Machine number: 823 Cutting length: 6,000 mm Cutting capacity: 6 mm carbon steel / 4 mm stainless steel Cutting angle: 1° Cutting rate: 6-10 strokes/min 31 hold-down clamps (15mm pitch) Programmable back gauge with electronic encoder, 0-1,000mm range (RD 12/15 kit) Hydraulic oil tank: 130 l Weight: approx. 22,000 kg Main motor: 15 HP — Back gauge motor: 0.5 HP Power supply: 380V Safety: light barriers and safety relay, with a formal safety compliance assessment (RD 1215/1997) already carried out, and the corresponding safety kit already installed and operational. For technical questions or to arrange a visit, please contact us by email – we are happy to answer any questions or send further photos/videos of the machine in operation.

Condition: reconditioned (used), functionality: fully functional, Poly-clip FCA 3430-18 | Double Automatic Clipping Machine Blsdsz H Axdjpfx Amren Manufacturer: Poly-clip System GmbH & Co. KG Model / Type: FCA 3430-18 Overall dimensions: Approx. 1500 x 1200 x 1950 mm Supported caliber range: From 24 to 90 mm Working pressure: 5–6 bar Overhauled 6 months warranty The Poly-clip FCA 3430-18 double automatic clipping machine is a high-class, reliable device designed for efficient portioning and sealing of natural, protein, collagen, and plastic casings. The device is ideal for meat processing plants, food processing facilities, and medium to large-scale butcheries, contributing to the creation of automated lines in conjunction with vacuum fillers. The machine is characterized by precise dosing, repeatability of the clipping process, and smooth operation of the closing mechanisms. The device is equipped with a user-friendly control panel with a touchscreen, allowing for quick changes to operating parameters, adjustment of spacing, and easy adaptation to a diverse range of products (sausages, pâtés, cheeses, food bars). The device has undergone a major overhaul and comes with a 6-month warranty.