Used Indumasch for sale (45)

Condition: used, Year of construction: 1999, plate thickness 4 mm plate length 200 mm Dcjdpfjvy Ikljx Aa Eed total power requirement 3 kW weight of the machine ca. 550 kg dimensions of the machine ca. 1,0 x 0,8 x 1,0 m

Condition: used, diameter / mm workpiece length / mm Dcsdsymqt Topfx Aa Ejd work piece width / mm total power requirement / kW weight of the machine ca. / t required space / m INDUMASCH edge milling machine Deburring machine Milling chamfer width: max. 5 mm

Condition: used, Year of construction: 1992, Max. sheet thickness: 4 mm steel Djdpfxetmyibo Aa Eecd Adjustable angle 30-120 degrees Blade length: 200 mm Hydraulic knife clamp and interlock Cutting depth continuously adjustable with digital display New top and bottom knife installed Weight: approx. 1,000 kg

Condition: used, Technical details: total power requirement: 2,2 kW table-size: 500 x 780 mm working area: 250 x 250 mm height over floor: 940 mm voltage: 380 V / Hz Weight approx.: 0,642 t dimension machine xH: 1,0 x 1,3 x 1,2 m HYDRAULIC NOTCHING MACHINE On the table there are left and right 90° linear scales length 250mm stop bars length 400mm; angle adjustable left/right 90°) operated by switch button and/or hand/foot control incl. tool 2x upper and lower knives built in (knife length 250mm) Dcjdpeu Icq Tofx Aa Ejd *

Condition: used, Year of construction: 1988, Year ca. 1988 plate thickness bei Stahl max. 3,3 mm table: 1100 x 700 weight 1 t Dedjx U A E Sopfx Aa Eecd Dimensions (L/W/H) 1,50 x 1,30 x 1,40 mm drive hydraulisch +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Edge router make Indumasch Motor 380 Volt Transport dimension: Length 500 mm width 320 mm height 250 mm Dcodpfx Ajt Uzp Hoa Eod Weight 19 kg

Condition: used, Year of construction: 1992, plate thickness 6,0 mm ST plate thickness 4,0 mm VA table-size 780 x 1000 mm blade length 200 x 200 mm strokes per minute 60 min engine output 3 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 1400 x 800 x 1300 mm Features: - Electro-hydraulic notching machine - 3x locking precision stop - Adjustment range 30 - 120 degrees, adjustment with the 2x front hand wheels - Electric stroke adjustment via digital display Dsdpfx Aasu Dbv Tj Eocd - Replacement blade (used) - Machine light - Side cut material ejection - Freely movable foot switch - Operating instructions

Condition: used, plate thickness 4,0 mm ST plate thickness 3,0 mm VA Dcjdpfxevg R Rho Aa Ejd table-size 800 x 800 mm blade length 250 x 250 mm strokes per minute ca. 55 min engine output 4 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1300 x 1300 x 1300 mm Features: - Electro-hydraulic notching machine - 2x locking precision stops, with stop bars - Single/continuous stroke selectable - Front finger guard - Freely movable foot switch

Condition: used, Year of construction: 1982, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel Dcsdpfx Aajxaaiis Eod - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual

Condition: used, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : Dcedpfjxaavpex Aa Eed ?machineno=1008-9397092

Condition: used, Year of construction: 2001, plate thickness 8.0 mm ST plate thickness 5.0 mm VA table-size 1000 x 950 mm blade length 200 x 200 mm strokes per minute 60 H/min adjustable Winkel 30°-140° mm work height max. ca. 950 mm oil volume 60.0 l engine output 4.0 kW weight of the machine ca. 1200 kg Dcedpfoxab Sxjx Aa Eed range L-W-H 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - 2x blank holders - 1x free moving footswitch - front scrap switch (collecting container) - Plexiglas finger protection in front, for better transparency - User manual (PDF) * Machinelink : ?machineno=1008-9397087

Condition: used, plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm blade length 200 mm angle adjustable from - to 30 - 120 Grad no. of strokes 60 Hub/min oil volume 60.0 ltr. table: 1000 x 800 mm total power requirement 2.62 kW weight 800 kg range L-W-H 1000 x 1500 x 1440 mm Furnishing: - robust hydraulic notching machine, with adjustable angle - Adjustment range 30 - 120 degrees * Adjustment with the 2x front handwheels Dcodpfx Ajxab N Rja Esd - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke

Condition: used, Technical details: electrics - voltage/frequency: 380 V/Hz Dcodpfx Aaju Nggns Eed total power requirement: 1,1 kW machine weight approx.: 18 kg dimensions L x W x H: 0,32 x 0,50 x 0,25 m EDGE BURRING MACHINE, table-top unit Application: chamfering, deburring Equipped with milling head Ø 65mm with carbide inserts Motor speed 2780 rpm. Workpiece holder via prism 45°, with 2 supports lxw: 500 x 40mm, rotatable 15° - 45° Milling bevel width max. 5.0mm, angle 15° - 45° *

Condition: good (used), Year of construction: 1990, blade length 200 x 200 mm max. sheet thickness: Normal steel 4 mm VA 3 mm variable notching angle 30 - 135 drive power 4 kW dimensions L x W x H 1700 x 1000 x 1500 mm Dedpfsdut Skox Aa Eecd Weight 940 kg Accessories / special features: - Cutting depth limitation via potentiometer with digital display - Variable angle of deflection 30 - 135°. - Clean cuts, even beyond the blade length without any start-up - Hydraulic clamping of the knives for angle adjustment - Large work table with scale and T-slots - Electric foot switch incl. 1 set of new upper knives 30 - 135°, newly mounted and adjusted Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), functionality: fully functional, Angle Cutter INDUMASCH 260 Dsdpfxjxyl Evj Aa Eecd

Condition: excellent (used), Year of construction: 1997, VA 200/6 K Notching and Punching Machine Indumasch VA 200/6 K Notching and Punching Machine 2 in 1 Manufacturer: Indumasch Model: VA206/K or DAV206 Year of manufacture: 1997 Hydraulic drive 5.5 kW Dcedpfsx Dtrfjx Aa Eod Stroke adjustment: electric, with digital display Worktable (width x depth): 1,000 x 1,620 mm Net weight: 1,500 kg Workpiece holder: standard 2-in-1 – all advantages in a single machine from INDUMASCH! The first station offers stepless, angle-adjustable notching options from 30° to 140°. Additionally, a second station is located at the rear of the machine for operations such as pressing, punching, bending, cutting, and more. This model is ideally suited as a compact machine center for small-batch production and/or prototype construction. Advantages of the first station: – Automatic cutting gap adjustment – High-precision measuring tapes with five reading functions – Internal stop for cutting sheet strips to length – Clean cuts, seamless beyond the length of the blades – Cutting head steplessly adjustable from 30° to 140° – Blade length: 200 mm – Cutting capacity in mild steel: max. 6 mm – Cutting capacity in stainless steel: max. 4 mm Advantages of the second station: – Digital stroke adjustment – Quick-change tooling system for punching – Clear, well-organized worktable – Pressing force: 20 t – Throat depth: 300 mm – Maximum punching diameter: 90 mm Indumasch_Notching Machines Brochure

Condition: good (used), Year of construction: 1983, Indumasch Siegen H200 Notching Machine TECHNICAL SPECIFICATIONS Sheet thickness: 4.0 mm Sheet thickness (stainless steel): 3.0 mm Blade length: 200 mm Adjustable angle range: 30 - 120 degrees Strokes per minute: 60 Oil capacity: 60.0 l Table size: 1000 x 800 mm Total power requirement: 2.62 kW Weight: 800 kg Dimensions (L x W x H): 1000 x 1500 x 1440 mm Year of manufacture: 1983 DESCRIPTION Equipment: - Robust hydraulic notching machine with adjustable angle - Adjustment range 30 - 120 degrees * Adjustment via 2x front handwheels - Hydraulic clamping and locking mechanism - Steplessly adjustable cutting depth with digital display - 2x positioning stops with stop bars for precision - Sheet stripper for cut sheets - Collection container for cuttings - Freely movable foot pedal for stroke release Dcodpfx Aasx N Ex Ds Esd

Condition: good (used), Year of construction: 1990, machine/vehicle number: X0006, Offer 25364 Technical Data: - Punching force: 200 kN - Max. sheet thickness: 6 mm - Max. punching diameter: 90 mm - Stroke: 42 mm - Throat depth: 400 mm - Maximum strokes per minute: 200 spm - Installation height: mm - Drive: 400 V / 3 kW - Required space approx.: W 1000 x H 1650 x D 1200 mm - Weight approx.: 1400 kg - Including: positioning table, quick-change punch device, foot switch, emergency stop switch, various punches and dies Dcedpfx Ajx I Nc Rja Eed The machine can be inspected by appointment at the 63322 Rödermark site. Company Erich Mieth: Tel. 06074-90877 Monday - Friday: 9:00 am - 12:00 pm and 2:00 pm - 5:00 pm The price includes 19% VAT. You will receive an invoice with VAT shown separately. Sale to commercial customers only. Payment by bank transfer before collection of the machine.

Condition: used, Max. sheet thickness: 4 mm steel, 3 mm stainless steel Blade length: 250 mm Dedpeu Hy N Dsfx Aa Eocd Strokes per minute: 52 Weight: approx. 900 kg knife sharpened Depth stop

Condition: used, Year of construction: 1993, Max. sheet thickness: 6 mm steel Adjustable angle 30-120 degrees Blade length: 200 mm Djdpfx Asu Eh Rgja Escd Digital angle displays right and left Weight: approx. 1,200 kg Good condition

Condition: used, Year of construction: 1995, Specification: Model: Indumasch Year of manufacture: 1995 For metal up to: 6 mm Other: foot pedal, interchangeable dies Dcjdewql S Hepfx Aa Eed If you have any further questions, we will be happy to answer them.

Condition: used, Indumasch Variable Notcher 200H (used), hydraulic, 200 x 200 x 4 mm, with adjustable angle - for cutting corners in sheet metal, e.g. zinc, copper, aluminum, steel, etc. Capacity: 200 x 200 x 4 mm Variable angle adjustment Robust design with integrated hydraulic unit With sharpened and adjusted blades Djdpfx Aokwcvaja Ejcd Will be technically tested before delivery, including sharp blades

Condition: used, Year of construction: 1998, Max. pressing force: 200 kN Dcodpfxsuxc Rbs Aa Esd Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control operation manual

Condition: used, Year of construction: 1996, Universal bending machine Make: Indumasch, model Minibend 20 Year of manufacture: 1996 Technical specifications Brand: Indumasch Dcsdpfxsxfr E Hs Aa Eed Model: Minibend 20 Year of manufacture: 1996 Pressing force: 20 t Tool height: 100 mm X-axis stroke: 200 mm Hydraulic drive: 3 kW Connection: 400 V / 16 A Hydraulic oil: Mobil SHC, Capacity 20 L Dimensions: L 1.50 x W 0.55 x H 0.95 m (incl. control) Weight: 500 kg + control unit Equipment - Tech-In Siemens OP7 control - Various bending tools according to photo - Operating manual All information without guarantee. A powered demonstration is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254629, Offer 25311 Dodjxqzirepfx Aa Escd Technical Data: - Cutting length: 250 mm - Cutting angle: 90° - Cutting capacity: - Mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate: up to approx. 55 / min - Table size: W 800 x D 800 mm - Working height: approx. 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil filling: 50 l - Electric foot pedal - Required space: approx. W 1300 x H 1250 x D 1300 mm - Weight: approx. 800 kg - Mobile base frame