Used Hakomatic B 1100 for sale (40,761)

Condition: used, Year of construction: 2010, mileage: 1,081 km, power: 15 kW (20.39 HP), first registration: 04/2010, overall weight: 1,787 kg, fuel type: electric, color: red, axle configuration: 4x2, maximum load weight: 1,080 kg, empty load weight: 707 kg, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, * German vehicle * Condition see photos * Ideal for large halls, parking garages etc... * Original only 1081 operating hours * Ideal for operation in large halls, logistics and parking garages as no exhaust fumes due to electric drive * Compact high-performance scrubber-drier for wet scrubbing and dry vacuuming in one operation * Combination machine with additional sweeping system, with dust extraction. * Hako B1100 sweeping and scrubbing machine * Area performance max. theoretically up to 7,000 m2 /h * Wet cleaning unit * Working width of brush head 102 cm * Brush diameter (2 brushes) 53 cm * Brush speed 210 rpm * Brush motor (2 pieces) 2 x 700 W * Brush contact pressure up to 540 N * Suction foot (working width) 126 cm * Fresh/dirty water 185/185 liters * Sweeping suction device: * Working width 138 cm * Electrical equipment * Rated voltage 36 V * Drive battery 36 V/640 Ah5 PzS * Drive motor 2000 W * Travel speed up to 8.0 km/h * Sweeping suction ? Fine and coarse dirt are picked up cleanly in the dry area in front of the scrubbing unit. * Wet scrubbing ? Even the toughest incrustations are removed cleanly by the rotating disk brushes * Dry vacuuming ? The pendulum-suspended, parabolically shaped squeegee leaves the floor immediately dry and ready to walk and drive on * Large tank capacity ? Long working times and short set-up times thanks to the flexible wall between the fresh and dirty water areas. * Dirt/water treatment system for multiple use of the water used for cleaning. ? Consistent cleaning quality in conjunction with the detergent dosing system. ? Enormous reduction in set-up times and water consumption. ? Optional use of fresh water or treated waste water. The fresh water tank always remains clean If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Rjdpfxovhqiys Aahow Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Ride-on Scrubber Dryer Hakomatic B 750 R – used - : Price ex location: only €1,250 (net)! The battery is deeply discharged, possibly defective! Manufacturer: Hako Model: Hakomatic B 750 R Year of manufacture: unknown Serial number: 7090205065514 Operating hours: 850 h Battery is deeply discharged Rsdpfxex El S As Aahew Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: refurbished (used), Year of construction: 2010, operating hours: 25 h, functionality: fully functional, Compact and robust ride-on sweeper with optional vacuum suction for dust-free operation. Equipped with 2 side brushes. Battery-powered compact ride-on machine. Lightly used (approx. 25 operating hours, according to the hour meter). Workshop inspected on 13.03.2026, including UVV safety seal. Working width: 110 cm. Side brushes can be engaged and lowered as needed. Surface performance: 15,000 m²/h. Electric filter shaker. Electric drive: 24 V, 180 Ah. Includes original fully automatic charger. Redoyurxmjpfx Aahow

Year of construction: 2006, operating hours: 704 h, condition: used, Rental possible = Further information = Rodpfx Asyxkm Ejahjw Contact Tobias Ebert for more information.

Condition: used, Year of construction: 2015, x-travel 1300 mm y-travel 610 mm Redpfx Aaeyqtbzohew z-travel 650 mm control Siemens type 828 D Shop Mill Tool changer 24 Fach spindle taper: ISO 40 SK spindle turning speed range 8500 U/min table surface area 1300x610 mm Table load 1000 kg spindle power 15 kW total power requirement . KVA weight of the machine ca. 8 t Operating hours: 5000 Equipment: Internal coolant system, chip conveyor on the left, cleaning gun, signal light The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), functionality: fully functional, Hako B43 S combination floor cleaning machine with accessories: Manufacturer : HAKO Werke GmbH Germany S/N 740671353081 Functional Suction pump, washing brush or squeegee Battery charger 24 V Charging voltage 800 W 90 kg Redpfx Ajty Su Esahjw CE marked

Condition: used, operating hours: 172 h, overall weight: 1,500 kg, fuel type: electric, HAKO Automatic Cleaner and Scrubber-Dryer Name: HAKOMATIC B 1050 Drive: ELECTRIC Condition: see photos / TOP condition Item No.: B 1050 Manufacturer: HAKO Year of manufacture: see photos - visually TOP Operating hour meter reads "172" 4 brushes Electric-operated Battery, full power 36 V DC / 5.5 KW Weight: 1500 kg New price: approx. €39,900 Price quoted for pickup from the warehouse in 47441 Moers Various cleaners and scrubber-dryers in stock We offer them as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings by telephone on Tuesdays and Thursdays between 9 a.m. and 4 p.m. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. Redpfewfflvsx Aahow (Shipping costs are approximately €350 net, depending on distance.) All dimensions are approximate.

Condition: good (used), Dimensions: Width: approx. 2,900 mm Height: approx. 1,038 mm Depth: approx. 1,100 mm Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T Included in the scope of supply: 02x workbench stands, used Rodpfxolnfi Rj Aahsw Material color: blue Stand height: 1,000 mm Stand depth: 1,100 mm Stand profile: 100 x 65 mm Includes cross and diagonal braces, base plates The stands are pre-assembled (welded framework) 02x workbench crossbeams, used Material color: yellow Box profile: 120 x 50 mm Crossbeam type: HN 120|25 Clear span: 2,700 mm 04x locking pins, used Design: fully galvanized 01x chipboard, 2nd choice, used Chipboard thickness: 38 mm Chipboard width: 2,900 mm Chipboard depth: 1,100 mm Chipboards may be in two parts 08x drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm The images serve to illustrate the material. The material color may vary. - The workbenches are delivered disassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days.

Condition: good (used), Included in the scope of delivery: 1x used rear wall grid Material color: similar to beige Overall width: approx. 1,200 mm Overall height: approx. 1,100 mm Mesh size (outer): approx. 93 x 53 mm Mesh size (inner): approx. 88 x 48 mm Frame profile dimensions: L-profile 30 x 30 mm Redpfx Aelucaqoahjw The rear wall grids are rusty, and the frame profile is partially damaged; see images.

Condition: new, For sale: high-quality BOA compensating (flexible) hose made of stainless steel, designed for industrial applications. 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN50 Length: 1100 mm Working pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Applications: industrial installations water and gas systems heating and steam systems compensation of vibrations and thermal expansions protection of pumps and fittings 📦 Condition: New – old stock (NOS) Possible minor storage marks (visible in the photos). Product fully functional, unused. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction Rodpfjyzixlox Aahow reduction of vibration and noise in the installation 📸 Included in the offer: Exactly what is shown in the photos.

Condition: refurbished (used), Year of construction: 2012, operating hours: 2,134 h, Hako Scrubmaster B45 TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and new DGUV V3 electrical inspection with test certificate. Working width without suction bar: 51 cm Working width with suction bar: 86 cm Rsdpsu Sr U Njfx Aahew Max. area performance: 2000 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / repairs carried out: - Suction motor 24V 400W new - 2 x 12V 85Ah GEL batteries new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses new - Disc brushes new - Support wheels new - Squeegee blades new - Fresh water filter new Additionally, we offer: Servicing, repair, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2014, Hako Scrubmaster B70 CL Completely refurbished scrubber-dryer with new batteries, new suction turbine, and much more – comes with a 6-month warranty and a new DGUV V3 electrical inspection including inspection report. Working width without squeegee: 65 cm Working width with squeegee: 95 cm Maximum area performance: 3,200 m²/h Fresh water tank: 72 L Recovery tank: 74 L Traction drive: Yes Drive type: Electric 24V Battery: 4 x 6V 180 Ah GEL batteries Installed new parts / repairs carried out: - 24V 600W suction motor – new - 4 x 6V 180 Ah GEL batteries – new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip Rsdpfetthfvex Aahow - All hoses – new - Disc brushes – new - ACLA rubber wheels – new - Suction lips – new - Fresh water filter – new Additionally, we offer: Service, repairs, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2019, operating hours: 1,665 h, working width: 850 mm, area performance: 4,200 m²/h, overall weight: 393 kg, type of input current: DC, input voltage: 24 V, tank capacity: 74 l, water tank capacity: 72 l, battery capacity: 180 Ah, operation weight: 393 kg, Hako Scrubmaster B70 CL Refurbished scrubber-dryer with new batteries, new suction turbine, and much more – includes 6-month warranty and new DGUV V3 electrical inspection with inspection protocol. Working width without squeegee: 85 cm Working width with squeegee: 110 cm Max. area coverage: 4,200 sqm/h Fresh water tank: 72 L Recovery tank: 74 L Drive system: Yes Safety key: Yes Drive type: Electric 24V Battery: 4 x 6V 180 Ah GEL battery New components installed / repairs carried out: - Suction motor 24V 600W new - 4 x 6V 180 Ah GEL batteries new - Brush deck / brush motors overhauled (including new ball bearings, carbon brushes, and bumper strip) - All hoses new - Pad brushes new - ACLA rubber wheels new - Squeegee lips new - Fresh water filter new Additionally, we offer: Rsdpfjyanhbjx Aahsw Service, repair, and sales for all common Hako models.

Condition: used, functionality: fully functional, Year of construction: 2000, control type: CNC control, roller (bottom) diameter: 210 mm, roller (top) diameter: 205 mm, side roll diameter: 170 mm, roller length: 1,100 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, power: 5.5 kW (7.48 HP), Equipment: cone bending device, emergency stop, hardened rollers, 4 – Roll bending machine Manufacturer: STÖLTING, Type: VB 322 Redpfx Aezgf Rxeahew Year of manufacture: 2000 Technical data Manufacturer: STÖLTING Type: VB 322 Year of manufacture: 2000 Bending length: 1100 mm Sheet thickness: 12 mm Bending allowance: 8 mm Upper roll diameter: 205 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Main motor: 5.5 kW Weight: approx. 3200 kg Equipment • CNC control • Conical bending device • Operating manual All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: reconditioned (used), Year of construction: 2011, operating hours: 1,313 h, functionality: fully functional, working width: 700 mm, area performance: 4,800 m²/h, overall weight: 716 kg, warranty duration: 12 months, water tank capacity: 105 l, HAKO HAKOMATIC B750 R WB700 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2011 with 1,313 hours of operation. 700mm cleaning head (WB700) equipped with two new medium-hard cylindrical brushes for use on any surface. New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 700 Suction width (mm): 850 Theoretical capacity (m²/h): 4800 Clean/dirty water tank capacity (l): 105/105 Number of brushes (pcs): 2 Brush speed (rpm): 850 Total weight, ready to use (kg): 716 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) Rsdpfxozhm Rvo Aahew NEW 24V 600W suction turbine NEW 700mm PPL 0.5 cylindrical brushes (x2) NEW drain hose NEW suction hose NEW head guard rubbers (x2) Built-in battery charger Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 105-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (700 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1,522 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2013 with 1522 hours of operation 510mm cleaning head (TB510) equipped with a new medium-hard disc brush for use on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Rodpfx Aaozhbrhohew Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: used, Year of construction: 2001, functionality: fully functional, The conveyor belt from RAU, featuring a plastic slat belt, is for sale: Effective length: 1100 mm Rodpfx Aaezg Dkwshjw Incline length: 1300 mm Usable width: 300 mm Cleats: 30 mm, spaced every 450 mm Mobile Belt speed: 4 m/min

Condition: reconditioned (used), Year of construction: 2015, operating hours: 758 h, functionality: fully functional, working width: 430 mm, area performance: 1,900 m²/h, overall weight: 228 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL TB430 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2013 Only 758 hours on the machine! 430mm cleaning head (TB430) equipped with a new medium-hard disc brush for work on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1900 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~228 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine Rsdpfozgwalex Aahsw NEW 430mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: new, APPC1740T-WL-B 17" Panel PC SN:TABI11000223 Manufacturer unknown, unused in opened original packaging, 100% functional, scope of delivery as per photos Redpfx Aajp Ilk Sjhew

Condition: ready for operation (used), Rexroth MNR: R005520180 FD: 584 Linear drive, stroke length: 1100 mm, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Rodpfx Aaji Eczyohow

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2138, input voltage: 380 V, type of input current: three-phase, ÖZM 1100 BLSD BOTTOM SEALING BAG MAKING MACHINE Machine length: 6600 mm Rjdpfx Aezd S A Ajahjw Machine width: 1900 mm Machine height: 1750 mm Year of manufacture: 2024 Capacity: 150 pieces/min Bag length: 100 - 2000 mm Bag width: max. 1100 mm Film thickness: 0.007 - 0.200 mm Servo motor (pulling roller motor): 5 kW Main motor (jaw motor): 1.5 kW Unwinder motor: 0.75 kW Bobbin unwinder motor: 1.5 kW Hydraulic bobbin lifting motor: 0.37 kW Edge control motor: 0.25 kW Conveyor motor: 0.25 kW Upper jaw heating element: 3 kW Lower jaw heating element: 2.5 kW Cutting heating element: 1.1 kW Current type: 3 - 50 Hz Operating voltage: 380 V Air pressure: 6 bar Total power: 19 kW

Condition: ready for operation (used), Konica Minolta Bizhub 1100, with 7.1 million copies, ready for printing. Equipment: FS 532 PF 709 As an experienced retailer of used copiers, we have developed significant expertise in packing and pallet shipping to guarantee that our customers receive machines in perfect condition. We ship copiers sourced from and maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Rodpfx Aaezbt Hljhjw Please do not hesitate to contact us for further information.

Condition: new, Year of construction: 2025, Vertical design for splitting short and long logs Low base plate for easy and strain-free loading of large logs Mechanical log lifting device brings heavy logs into position while protecting the back Equipped with a log catching bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Rsdpfx Aaohkz Hmshew Convenient transport with a manual drawbar, thanks to the standard chassis with hard rubber tires and an additional support wheel Impact and scratch-resistant due to high-quality powder coating Space-saving storage due to the easily lowerable cylinder Dimensions and weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Power consumption: 3.5 kW Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Device data Splitting force max.: 14 t Splitting length min.: 560 mm Splitting length max.: 1040 mm Log diameter min.: 100 mm Log diameter max.: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: In stock at 54634 Bitburg - available immediately - Subject to prior sale.

Condition: excellent (used), Year of construction: 2013, operating hours: 1,395 h, Calibration and finishing machine, wide-belt sanding machine Kundig Brilliant with electronic segment sanding pad, adjustable sanding head and finish sanding. A video of the machine in operation can be sent upon request. Ideal sanding machine for interior design companies, also suitable for intermediate sanding of painted surfaces. Edge banding machine with combination unit and electronic segmented pressure beam. Edge segments can be switched on and off. Segment width of the pressure beam 22mm (ideal for intermediate sanding of painted surfaces). Pneumatically adjustable calibration roller, grooved, rubberized roller with grit adjustment. Drive motor 11kW Infinitely variable belt speed 3 - 15 m/s via frequency inverter. Belt feed infinitely adjustable from approx. 3 to 15 m/min. Belt blowing device workpiece-controlled. Constant table height approx. 950mm by adjusting the upper part of the machine, thus also integrable into sanding lines. Feed belt still has good grip and is in very good condition. Carpet with adjustable vacuum blower, thus even small parts can be held securely. Maximum sanding width approx. 1100mm Workpiece height approx. 3.5 to 200mm Sanding belt dimensions 1120 x 2000mm Infeed roller table and outfeed roller table Hood locking Dust extraction connection 1 x 180mm, 1 x 125mm Terminal control with 45 programmable sanding programs for automatic machine control. Parameters: belt speed, feed speed, workpiece height, belt blowing nozzle, vacuum blower, adjustment of the calibration roller and the parameters of the segment sanding pad. Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness adjustment with feed triggering, thus eliminating the need for constant re-measurement with the caliper. Programs for different sanding tasks can be stored and selected via smartselect. CE marking Operating manual 2 sanding inserts available The four bellows have been renewed without the illustrated connection cable Original paint, only a few spots retouched Very good condition from a small company Machine has approx. 1395 operating hours, i.e. approx. 2 hours per week. Dimensions approx. 1900 x 1650 x 2150mm (L x W x H). Weight approx. 2300kg. With a large, mobile storage table at the height of the belt, for storing the sanding belts. Table size approx. 1520 x 1360 x 950mm Redpeyxg N Nefx Aahjw Including various sanding belts from K80 to K400 The machine can be demonstrated on site upon request after prior arrangement. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this provider".

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1,408 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2013 with 1408 hours of operation 510mm cleaning head (TB510) equipped with a new medium-hard disc brush for use on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. Rsdpfszcngvjx Aahow A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.