Condition: new, Center length ----- 1000 mm Center height ----- 230 mm Turning diameter ----- 460 mm Main spindle passage ----- 80 mm Bed width ----- 336 mm Spindle speed ----- 25-1800 rpm Motor ----- 5.5 KW HEAVY DUTY VERSION - WEIGHT 2400 KG INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOB2 with 4 tines * 3 Chuck 250 mm * 4 Chuck 320 mm * 350 mm clamping plate * Fixed and moving glasses Dslqv Eoga Tz Usckjut * LED working light and cooling system * Electric brake CE * Box with various tools

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A Duelsv Rrq Djqv Eckst weight of the machine ca. 18 t dimensions of the machine ca. 6,5x3,8x4 m

Condition: good (used), Year of construction: 2003, Functionality: fully functional, turning diameter over cross slide: 230 mm, spindle bore: 62 mm, turning diameter over bed slide: 400 mm, turning length: 1,000 mm, total length: 3,150 mm, total width: 1,500 mm, total height: 1,800 mm, rotational speed (max.): 2,000 rpm, overall weight: 2,400 kg, Equipment: rotational speed infinitely variable, Technical description according to data sheet Duolev Ux Tasqv Ecket

Condition: excellent (used), Year of construction: 2010, operating hours: 28,600 h, Functionality: fully functional, machine/vehicle number: V102409, turning length: 200 mm, turning diameter: 120 mm, spindle bore: 65 mm, type of input current: three-phase, bar passage: 65 mm, total height: 2,100 mm, total length: 3,800 mm, total width: 2,700 mm, bar diameter: 65 mm, overall weight: 10,600 kg, Equipment: documentation/manual, rotational speed infinitely variable, Machine was purchased from CNC Outlet. Very good condition. Various bearings, belts and distributors replaced. Coolant pumps 16bar are new. 2 spindles/2 turrets/2C+1Y axis gripper system for gripping Magazine: IEMCA Master 865MP/33/L 2010 No.021030SA05 approx. 1300kg Manuals, Datasheed, various holders available Dujlqvjvc Icao Eckst Chuck by arrangement

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: W202309, • Number of spindles: 2 • Spindle speed range: up to 5000 rpm • Axis travel: Djlsv Uxwxjqv Eckeut • X-axis: 280 mm • Z-axis: 850 mm • Number of turrets: 16 • Machine weight: 6,500 kg

Condition: good (used), Year of construction: 1998, Mori Seiki SL 250, Built in 1998, Mori Seiki MSP 501 control system, Dujlqv Ecjv Uxiuekst Turning length approx. 1000 mm, NC technology, gantry loader up to Ø approx. 100 mm, 1 12-station turret, Spindle speed up to 3,500 rpm, Driven tools, Counter spindle, C-axis, 2 x three-jaw chucks, 1 x collet chuck, Chip conveyor, Fixed holders, Driven tool holders,

Condition: used, Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 160 3205, Sale only within EU member states! Dujlqjuxl Ezjv Eckst No private sale MAE can be inspected. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tooling, as well as for compliance with all safety and environmental protection safety and environmental protection requirements. Any warranty is excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tools as well as for compliance with all safety- and environmental-requirements, mentioned in the accident prevention regulations, we take over no guarantee.

Condition: good (used), Year of construction: 2006, Model: SLX 1630 Year: 2006 Control: ProtoTrak SLX Dujlqv Ejrm Sk Tockjt Swing over Bed: 400mm Distance Between Centres: 760mm Spindle Bore: 54mm Spindle Speeds: 2500 RPM Machine with: 3 – jaw chuck 4 – jaw chuck Quick Change Toolpost

Condition: good (used), Year of construction: 1982, Functionality: fully functional, Precision high-speed lathe make FEINBAU Delqv Ecjv Rppdskeut Machine No. 4891 Type PM1-FZB Year of manufacture 1982 Technical data : . Maximum turning length 90 mm Swing diameter over bed 220 mm Swing diameter over support 110 mm Center distance 160 mm Bore 23 mm Drive motor 0.65 / 1 / 1.3 kW Space requirement , length x width 1.6 x 0.8 x 1.2 m Scope of delivery : Collet chuck device for collets : K23 DIN 6341 Collets Hand lever cross support with adjustable stops Hand lever boring vise, with 2 x MK1 holders and stops . .. Ongoing purchase of used German machines without NC or CNC control .

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm Dslqv Ecomcibwjkout control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" *

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Turning length 1,000 mm Maximum swing diameter over bed cover 600 mm Swing diameter over face guide 420 mm Control SIEMENS Duelsvxgutsqv Eckjt Travel path - x 275 mm Travel path - z 1,065 mm Main spindle: Speed range - main spindle 16 - 3,200 min/-1 Drive power - main spindle 27 kW Max. torque 800 Nm Spindle diameter in front bearing 120 mm Spindle bore 85 mm Chuck diameter 260 mm Spindle head 220H5 Tool turret: Number of tool positions 12 pos. Shaft diameter 40 mm Turret switching time 0.8 sec. Tailstock: Quill diameter 100 mm Quill stroke 120 mm Tailstock mount MK 5 Quill pressure max. 950 daN Feeds: Rapid traverse X: 10 / Z: 15 m/min Feed force X: 500 / Z: 1,000 daN Total power requirement 52 kVA Machine weight approx. 7.5 t Space requirement approx. 5.5 x 2.5 x 2.1 m Accessories 1 set of soft jaws for chuck various VDI 40 mounts

Condition: good (used), Year of construction: 1995, Mori Seiki ZL 15 SMC, built in 1995, MSC 516 control, 1 12-station turret, 2 6-station turrets, driven tools on turret 1, C-axis, spindle speed up to 3,000 rpm, chip conveyor, collet chuck, 2 three-jaw chucks, Dujlev Uw Dwjqv Eckot rigid holders, driven tool holders,

Condition: used, Year of construction: 2004, Turning length – 600 mm Turning Ø – 680 mm Ø above the bed – 800 mm Ø above transversing slide – 500 mm Length between centers – 600 mm X-axis – 160 mm Z-axis – 635 mm Spindle taper - VDI 40 Spindle bore - 136 mm Number of turrets - 12 Number of tools on turret - 12 Dslqv Ecov Rnvvjksut Number of rotating tools - 12 Spindle speeds 5000 rpm Spindle motor power – 25 kW Tailstock Control: Siemens Sinumeric 840 D (w/shopturn) Equipped with: 2 straight rotating tools 2 angle rotating tools 3-jaw chuck 510 mm

Condition: excellent (used), Year of construction: 2021, operating hours: 3,065 h, Functionality: fully functional, machine/vehicle number: 3121061, Haas ST-20Y Turning Center (2021) - complete equipment! We offer a Haas ST-20Y turning center from 2021 in very good condition, ready to work immediately. The machine is sold with full equipment. Equipment: -6 driven holders (3 axial, 3 radial) -4 holders for external knives -5 holders for internal knives -Various tools: knives, boring bars, indexable drills, cutting bars, threading knives, etc. -Bar puller -Soft and hard jaws -Sliding ring for jaw boring -Set of lathe centers -Chip ejector -Parts catcher -Programmable tailstock Technical parameters: Maximum turning diameter: 290 mm Maximum turning length: 500 mm Spindle passage diameter: 62 mm Price: EUR 70,000 net – negotiable Various financing options: Delqjv Uvzhsv Eckeut -Possibility of paying the entire amount at once -Assignment of the current lease is also possible – the amount the compensation is determined individually

Condition: good (used), Year of construction: 2001, Tsugami BS12-III CNC sliding headstock automatic lathe TECHNICAL DATA turning diameter: 3-12 mm Turning length: 170 mm Max. Bore diameter: 7 mm Max. Internal thread diameter: M6 Speed: 12`000 rpm Speed, counter spindle: 6`000 rpm Number of axes: 6 Dimensions: approx. 190 x 130 x 220 mm Dslqv Ecjq H Ea Ueksut Weight: 2200 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 1993, - TRAUB control TX 8F - spindle passage 42 mm - Working spindle speed: 40 - 4.000 1/min - 4 grooving slides: stroke 60 mm - 8-fold turret - high pressure pump 25 bar - backworking (2 spindles) - bar feeder (3 m) Duslqvoldd Iqj Eckjt - chip conveyor

Condition: used, Year of construction: 2003, Max. Swing – 675mm Swing over carriage – 350 mm Max. Machining dia. – 380 mm Max. Machining lenght – 538 mm X-axis travel – 230 mm Z-axis travel – 575 mm Spindle - Chuck size – 8” Duslqv Ejv Rnuxscket Spindle speed – 5000 rpm Turret w/12 stations Control: Mazatrol PC Fusion 640 T Equipped with: Barfeeder LNS Eco Load

Condition: excellent (used), Year of construction: 2007, - Control: FANUC 32i - Max. bar diameter: 65 mm - Max. speed: 5,000 rpm - 12-station turret (non-driven) - Tailstock - Chip conveyor - Without air filter - Parts conveyor OPTION: TOP-Automationi XF 475 bar loader Max. bar length: 4,200 mm Dolqvoralt Sj Eckjut Price with bar loader: €16,500!

Condition: used, Year of construction: 1997, Max. turning dia. 250 mm Max. turning length 600 mm Swing over bed ways 450 mm Spindle speeds 45-4500 rpm Spindle bore 60 mm X/Z - 149,9/670,56 mm Turret w/12 stations Control: Fanuc 18-T Duelqov Rnq Tev Eckst Equipped with: Bar feeder Monosam 45 3-jaw chuck 208 mm

Condition: good (used), Year of construction: 2007, DESCRIPTION Control SIEMENS Main and counter spindle Ø 42 mm Max. speed main and counter spindle: 7,000 rpm C-axis 3x turret Tool holder VDI 25 Turret 1 Number of stations 10 (all driven) Travel path: X= 70, Y= 70, Z= 250 mm Turret 2 Number of stations 10 (all driven) Travel path: X= 70, Y= 70, Z= 400 mm Turret 3 Number of stations 10 (all driven) Travel path X= 125 mm Speed of driven tools: 8,000 rpm Bar loader INDEX MBL Djlqv Ecsu Rc Rrokeut February 2025 New chip cylinder with rotary feedthrough (draw tube etc.) Original Index spare parts, € 10,000

Condition: excellent (used), Year of construction: 2018, The PUMA TT is a horizontal milling and turning center, supported by 2 driven tool turrets, y-axis and built-in counter spindle. Commissioning 2019 Bar capacity 81 mm, CNC control FANUC 31i-B with manual Guide i, Main and counter spindle as built-in spindle 3500 rpm 433 Nm, two 12-position tool turrets with directional logic, driven tools 5000 rpm 47 Nm, Top tool turret with y-axis, automatic tool measuring arm, electronic tool monitoring, Parts ejector for counter spindle with internal coolant flushing. Parts removal with conveyor belt, max. workpiece weight 4 kg, Three-jaw chuck HS-10, Dslqv Eceuacp Doksut Booster pump incl. filter approx. 30 bar, Hinged belt chip conveyor, Clamping top size 100, Drilling and milling head with internal cooling, QUICK LOAD SRVO II bar loading system up to 1600 mm bar length, Machine dimensions: L 4050 mm x H 2480 mm x width 2210 mm Weight: 12,700 kg Machine can be inspected under power. NEW PRICE: 440.000,-

Condition: excellent (used), Year of construction: 2019, TURNING CENTER WITH 2 TURRETS, 2 SPINDLES AND INTEGRATED GANTRY LOADER Control Fanuc 31i - Model B Main and counter spindle 2 turrets with 12 stations each (driven) Tool speed 4,000 rpm 2x Y-axis 2x C-axis Travel path: X= 170, Y= 90 (+50/-40), Z= 630 mm B-axis (counter spindle 670 mm) max. turning diameter 200 mm max. turning length 350 mm Bar capacity main / counter spindle 70 / 44 mm Dujlqv Ecovyrxaoket Speed main / counter spindle 4,000 / 5,000 rpm Gantry loading system - max. workpiece diameter 150 mm - max. workpiece length 200 mm - max. workpiece weight 5kg chip conveyor Bar loader IRCO Breuning MUK 10012 III

Condition: good (used), Year of construction: 1999, max. turning diameter 500 mm max. turning length 1400 mm turret with 12 stations not driven Dujljvi Rcpoqv Eckst

Condition: good (used), Year of construction: 1991, max. bar diameter: 42mm Chuck diameter: 40mm Diameter over cross slide: 160mm Speed range: 10-5000 rpm Dslqvevy Uy Ho Eckeut Turret with 12 stations (not driven) 12 Chip conveyor Bar loader FMB turbo 3000 max. bar length: 3m

Condition: good (used), Year of construction: 2008, - Control FANUC Series 18i-TB - max. bar Ø: 16 mm - max. speed - main spindle: 12 000 min-1 - max. speed - pick-up spindle: 12 000 min-1 - Headstock stroke: 130 mm - 3x rotating tools Djlstmu Rgjqv Eckout - Turning tools 4 + 4 - Bar feeder FMB minimag 18/3200 A