Used flame-cutting machines for sale (34)

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 77249, input voltage: 220 V, cutting length (max.): 2,500 mm, cutting width (max.): 1,250 mm, input current: 1 A, ESAB-HANCOCK oxy-fuel cutting machine UXB 12.5 – manufactured in 1994 – fully functional For sale is an oxy-fuel cutting machine from the manufacturer ESAB-HANCOCK GmbH, type UXB 12.5. The machine is in fully functional and operational condition. It was rarely used in our company and therefore has relatively low usage. Technical data: Manufacturer: ESAB-HANCOCK GmbH Type: UXB 12.5 Machine no.: 77249 Year of manufacture: 1994 Connection voltage: 220 V Frequency: 50 Hz Condition: used, fully functional Fpjdpfx Aezxqa Aok Uol Inspection & collection: The oxy-fuel cutting machine can be inspected on-site and tested for functionality after prior appointment. The sale is exclusively for self-collection. Dismantling, loading, and transport must be arranged beforehand. We will gladly provide further technical information, dimensions, or additional images if there is serious interest.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Working table 12500x2500 Plasma 3D Generator ESAB Precision Plasma Arc 360 Filter unit Sideros Fsdpfx Akszracys Uspl Oxy cutting torches 2pcs Uninstalling and installing is not included and has under the buyer's responsibility. Machine is available starting from October 2026.

Condition: used, Year of construction: 2021, CNC Portal Cutting Machine Manufacturer: Messer Type: MultiTherm Eco 3600 Year of manufacture: 2021 CNC control: Global Control Fpedpfozyabljx Ak Uol Track gauge: 3,600 mm Working tables: 2,300 x 6,200 mm 4 Oxy-fuel torches, type ALFA MS 4452/250 Cutting thickness: max. 150 mm Bevel cutting possible Automatic gas control (OmniFlow) for cutting oxygen (max. 15 bar) Dust extraction system: Keller dry separator, type Vario 2 Software: OmniWin2021 9926

Condition: good (used), Year of construction: 2008, Offer 26289 Approximate technical specifications: - CNC flame cutting machine with 2 torches, as shown in the picture - 2 torches with adjustable height and inclination - Track gauge approx. 4.2 m - Track length approx. 7.5 m Fodpfezvnb Sox Ak Uspl - Track height approx. 0.5 m - Supporting table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons - Without supporting table!

Condition: used, Year of construction: 2006, CNC gantry flame cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Working table: 1.5 x 6 m 2 oxy-fuel torches Fpjdpfxow El Udo Ak Uel 9926

Condition: used, Year of construction: 2013, table width 6000 mm table length 2000 mm burner heads 1 Equipment: - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Fpodpfeyk Dgzex Ak Ujl Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) Fpjdpfsx H T H Rsx Ak Uol - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting Fpedju Dw I Ejpfx Ak Usl LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2020, functionality: fully functional, product height (max.): 610 mm, Equipment: double-sided, FICEP NOZOMI 601 RAZ - ROBOTIC PLASMA CUTTING SYSTEM FOR STRUCTURAL STEEL | YEAR 2020 The Ficep NOZOMI 601 RAZ is a fully automatic robotic plasma cutting system for three-dimensional thermal processing of steel profiles and beams. An anthropomorphic 9-axis articulated robot machines all four profile faces without re-clamping, replacing layout, thermal cutting, coping and grinding with one automated work cell - less handling, shorter throughput times, reproducible quality from CAD/CAM data. CONDITION Used - technically sound. The machine is currently in productive operation. Year 2020 - a comparatively young machine of its class on the used market. - Inspection UNDER POWER during ongoing production possible by appointment. - Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. - Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The NOZOMI 601 RAZ combines plasma cutting, coping, bevel cutting, weld-seam preparation and marking in a single pass. The non-contact laser scanner measures the profile surfaces and determines the torch start position automatically. The system processes H-beams, U-channels, L-angles and flat bar. Typical applications: structural steel, bridge and plant construction, series production of connection and node details. Plasma processing uses the Hypertherm True Hole process. TECHNICAL DATA - Manufacturer: Ficep | Model: NOZOMI 601 RAZ | Year: 2020 | S/N: 36291 - Machine type: Robotic plasma cutting system (thermal profile processing) - Condition: used, technically sound - Profile size min.: 80 x 10 mm - Profile size max.: approx. 610 mm profile height (flange width to be confirmed during inspection) - Profile types: H-beams, U-channels, L-angles, flat bar - Machining sides: 4 | Clamping: automatic - Number of CNC axes: 9 | Design: anthropomorphic articulated-arm robot - Profile measurement: laser scanner, non-contact, fully automatic (multi-surface) - Cutting process: plasma | Plasma cutting heads: 1 - Plasma technology: Hypertherm True Hole - Bevel cutting: 45-degree bevels, copes, weld-seam preparation - Marking function: yes (orientation marks, weld symbols, labelling) - Software: Steel Projects PLM (licence transfer on request), free vector programming, automatic nesting - Infeed length: 16 m | Outfeed length: 16 m - Extraction: integrated particle filter system Machine weight, electrical connection values and max. plasma cutting thickness are confirmed on request. SCOPE OF DELIVERY Fpodpfxexq Rpns Ak Uel - 1 x Ficep NOZOMI 601 RAZ robotic thermal cutting system (year 2020) - 1 x anthropomorphic 9-axis articulated-arm robot - 1 x plasma cutting head (Hypertherm True Hole compatible) | 1 x automatic torch changer - 1 x laser-scanner measuring system (non-contact, multi-surface) - 1 x infeed roller conveyor (16 m) | 1 x outfeed roller conveyor (16 m) - 1 x automatic clamping device | 1 x integrated extraction system LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is a specialist for Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Arrange an inspection under power | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2017, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 32 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, PLASMA CUTTING) | YEAR 2017 The Ficep Tipo G25LG is a CNC-controlled plate processing line for drilling, milling, marking and plasma cutting of steel plates in a single pass - without re-clamping. This significantly reduces throughput times in the production of gusset plates, end plates and connection components. Fpjdpfx Aksu Dxbts Uol CONDITION Used - technically sound. The line is currently in productive operation. - Inspection UNDER POWER during ongoing production possible by appointment. - Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. - Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The G25LG combines a vertical mono drilling unit with automatic tool changer (ISO 40) and an integrated plasma cutting unit in a rigid twin-bridge gantry frame - all processes in a single pass according to the NC program. The Ficep Pegaso CNC transfers part data and hole patterns directly from CAD without manual rework. Typical applications: structural steelwork, steel trading and plant construction. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2017 | Serial number: 35446 - Machine type: CNC plate processing line (drilling / milling / plasma cutting) - Condition: used, technically sound - Plate width: max. approx. 2540 mm, min. 200 mm | Max. plate length: 6000 mm - Plate thickness: max. 100 mm (drilling), max. 45 mm (plasma), min. approx. 6 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Tool positions (ATC): 24 - Drilling diameter: max. 32 mm, min. approx. 10 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7000 rpm | Spindle power: 15 kW - Plasma source: Hypertherm HPR 400 | Plasma current: 400 A - Straight plasma cutting and bevel plasma cutting - Max. longitudinal travel speed: approx. 30 m/min | Cross positioning: approx. 4.6 m/min - Pass line height: approx. 850 mm - CNC control: Ficep Pegaso, direct NC data input with CAD interface - Frame concept: welded twin-bridge gantry frame | Machine weight: 8000 kg - Processes: drilling, milling (straight/curved slots, countersinking, Y/J weld prep), tapping, centre punching, marking, straight and bevel plasma cutting Values marked "approx." are confirmed during inspection. Overall dimensions and electrical connection on request. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2017) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Bevel plasma cutting torch | 1 x Hypertherm HPR 400 plasma source (400 A) - 1 x Infeed roller conveyor with material transfer (6 m) | 1 x Outfeed roller conveyor (3 m) - 1 x Fume extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Arrange an inspection under power | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2016, machine/vehicle number: 0401-260017, The FICEP Tipo G31 sheet metal processing center for the cost-effective processing of steel sheets and flat steel in the steel construction and steel trading industries. Fjdpeznh R Rofx Ak Uspl The Ficep Tipo G31 LG can drill, center-punch, tap, countersinking, marking, milling, oxy-fuel cutting, and plasma cutting. The CNC-controlled sheet metal processing center is equipped with 2 drilling units, each with 26 kW of drive power. Two tool changers, each with 24 tool stations for ISO 40 tool holders, are available for automatic tool changing. This system is suitable for sheet metal sizes: sheet width: minimum 200 mm, maximum 3,100 mm; sheet length: minimum 2,500 mm and maximum 14,000 mm. A powerful and modern Hypertherm HPR 400 XD plasma power source is available for plasma cutting. In addition, the system features an oxy-fuel cutting unit for thick materials. The drilling unit, with high torque and a spindle speed of up to 6,000 rpm, is designed for drilling with carbide tools such as solid carbide drills, Kennametal drilling tools, Nenok Multiplex indexable insert tools, as well as for use with HSS coolant-channel drills with diameters ranging from 10 mm to 40 mm. The Ficep Tipo G31 sheet metal processing center is in very good condition and has only a few operating hours.

Condition: used, Year of construction: 2020, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, sheet thickness steel (max.): 50 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. Fjdpjv Iaqyefx Ak Ujpl ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm Fodox N Icljpfx Ak Uepl - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Fsdpfogqkc Nox Ak Ujpl Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter

Condition: used, Year of construction: 1995, CNC portal flame cutting machine Manufacturer: Messer Type: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm 8 x oxy-fuel torches, type ALFA 8 x Omnilift 200 Without track Without table Without filter Fsdpfx Akeyay Dhe Uopl 9926ä

Condition: used, Year of construction: 2015, functionality: fully functional, table length: 6,000 mm, positioning speed: 30 m/min, table width: 2,540 mm, working height: 1,092 mm, workpiece weight (max.): 5,000 kg, overall weight: 24,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO B254 - CNC PUNCHING, DRILLING & THERMAL CUTTING CENTER | YEAR 2015 The Ficep Tipo B254 is a CNC-controlled punching, drilling and thermal cutting center for the complete processing of steel plates and flat products in a single pass. Punching, drilling, countersinking, tapping, marking and thermal cutting via plasma and oxy-fuel are carried out on one machine without intermediate handling. CONDITION Used - technically sound. The machine is currently in productive operation and CAN BE INSPECTED UNDER POWER (by appointment). Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The system combines three processing units in one CNC-controlled line: hydraulic punching unit (1000 kN), drilling head (20.1 kW) and thermal cutting unit with plasma torch (Hypertherm HPR 260) plus oxy-fuel torch. All processes run via the Mitrol CNC as automated machining cycles; the machine processes steel plates up to 2540 x 6000 mm. Typical applications: structural steel fabrication, structural engineering and prefabrication of gusset plates, end plates and connection plates. TECHNICAL DATA - Machine type: Automatic CNC punching and thermal cutting system for plates - Year: 2015 | Serial number: 34201 | Machine weight: 24,000 kg - Working height: approx. 1,090 mm | Max. positioning weight (plate): 5,000 kg - Max. plate size: 2540 x 6000 mm | Min. plate width: 508 mm - Punching force: 1000 kN | Stripping force: 100 kN | Punching tools: 8 - Max. punch diameter: 32 mm | Max. punching thickness: 20 mm - Drilling heads: 1 | Drilling tools per head: 8 - Max. drilling diameter: 40 mm | Max. drilling thickness: 100 mm - Spindle power: 20.1 kW | Max. spindle speed: 4000 rpm - Plasma torches: 1 | Oxy-fuel torches: 1 | Plasma source: Hypertherm HPR 260 - Max. plasma cutting thickness: 35 mm (pierce start) / 60 mm (edge start) - Max. longitudinal feed speed: 30 m/min - CNC control: Mitrol CNC (master/slave), online remote diagnostics - Processes: punching, drilling, countersinking, tapping, milling, marking, scribing, oxy-fuel and plasma cutting Fodexn T H Djpfx Ak Uopl Min. plate length, max. overall material thickness and cross positioning speed are confirmed during inspection. SCOPE OF DELIVERY - 1 x Ficep Tipo B254 plate processing center (year 2015) - 1 x Hydraulic punching unit 1000 kN with 8-position tool changer - 1 x Drilling unit 20.1 kW with 8-position tool changer - 1 x Plasma cutting torch | 1 x Oxy-fuel cutting torch - 1 x Hypertherm HPR 260 plasma cutting system - 1 x Marking unit (configuration to be confirmed during inspection) - 1 x Chip conveyor - 1 x Donaldson Torit dust extraction system | 1 x Punching tool set LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in Ficep structural steel machines. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing under power | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1211, Machine ready for operation. Fjdszn Hqvopfx Ak Uopl

Condition: used, Year of construction: 1987, functionality: fully functional, ZINSER Flame Cutting System – CNC 500 – Table 3,000 × 8,000 mm Industrial version | CNC controlled | Immediately available Short description: For sale is a robust Zinser flame cutting system with Zinser CNC 500 control and a large cutting table measuring 3 × 8 m. The machine dates from the 1980s and was operating perfectly up to its professional dismantling. The machine is currently dismantled; therefore, a test run is not possible. Inspection of the system and all components is, of course, possible by appointment. Technical data: - Manufacturer: Zinser - Machine type: Not specified - Year of manufacture: 1980s - Control unit: Zinser CNC 500 - Cutting process: Oxy-fuel / flame cutting - Cutting table: approx. 3,000 × 8,000 mm - Condition: used, dismantled Condition & Classification: Fsdpfx Aksyanbbs Uspl - System was in operation and fully functional up to dismantling - Dismantled in an orderly and professional manner - Heavy-duty industrial design - Mechanics, table, and gantry in solid condition - Due to age, not a modern high-speed CNC, but: x very robust x straightforward technology x ideal for refurbishment, modernization, or continued use Scope of delivery: - Cutting table 3 × 8 m - Gantry / carriage - CNC control Zinser CNC 500 - Existing flame cutting components - Sale as inspected Inspection & Collection: - Inspection possible by appointment - No test run possible as the system is dismantled - Loading and transport to be arranged by buyer - Location: Germany

Condition: used, Year of construction: 2008, FICEP Tipo B 251 sheet metal processing center Year of construction 2008 - sheet metal processing center - Plate size max. 6000x2500mm Fodpfx Aksy E N Dpj Uopl - 1 drilling unit - 6-fold changer incl. marking tool - 1 punching unit (currently without function) - 12-fold tool changer for punching tools - Conveyor belt for finished parts - Hypertherm HPR 260 plasma source - Donaldson Torit DCE extraction system - Machine weight according to manufacturer approx. 23 tons Main Technical Specifications Plate specifications on infeed side: • Length max. mm 6000 min. mm 2500 • Width max. mm 2540 min. mm 500 Work piece specifications on outfeed side: • Length min. mm 200 • Width min. mm 150 Punching Capacities (on 400N/mm² plates) • Punching force kN 1000 • Maximum stripping force kN 100 • Maximum hole diameter in punching mm 100 • Max. diameter on 20 mm thickness mm 38 Other Specifications : • Thickness of the large plate min. mm 6 • Thickness of the large plate (punching operations) max. mm 25 • Thickness of the large plate (thermal cutting) max. mm 32 • Thickness of the large plate (drilling operations - with optional device) max. mm 100 • Positioning weight max. kg 5000 • Linear weight of the large plate max. kg/m 750 • Max. vectorial traverse speed max. m/min. 30 • Cross positioning speed m/min. 40 • Working level’s height mm 1100

Condition: defective spare-parts repository (used), Year of construction: 2004, machine/vehicle number: 20404881, Offer 23906 CNC - Flame Cutting Portal for Dismantling Technical data approx.: - CNC flame cutting portal with 4 torches as shown, for dismantling. - 4 x torches with automatic height adjustment - Torches feature tilt adjustment - CNC control unit NCE - Control cabinet - Track gauge approx. 3.5 m - Space requirement approx. 5 x 2.4 m Fpsdpfxsw Nwucj Ak Ujl

Condition: used, Year of construction: 2020, controller model: , _____ Description: Year of manuf. : 2020 Technical specifications Working surface:2000 mm x 15000 mm Total width:5070 mm Height:1980 mm equipment :-Global Control S with 15" colour touchscreen :-Joystick and handwheel for Global Control S panel :-Cooling for the control cabinet :-Laser diode :-Drives up to a maximum of 35 m/min. AC :-Heat shield without air cooling :-Runway for double-sided longitudinal drive HEB :-OmniFlow oxyfuel supply up to 70 m'/h (gas flow control) :-ALFA machine cutting torch (internal ignition) :-Smartlifter 300 Fpjdpfjyi Nltex Ak Uel :-SensoMat ARKI :-Full addressing of gases :-Light barriers :-Safety device for wheel housing (foot switch)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 32,000 h, Offered is a 3-axis CNC tube flame cutting system. Tube diameter: 60mm-500mm, square profiles X/Y: 420mm/420mm, tube length max.: 4500mm, wall thickness max.: 1mm-20mm, cutting speed max.: 24000mm/min, positioning accuracy: approx. 0.5mm, clamping force of the chuck: 30000N, torque max.: 13000Nm, cutting system: Hypertherm Powermax 1650, controller: Burny 10 LCD Plus, machine dimensions X/Y/Z: approx. 4000mm/2000mm/1800mm. The controller has a defect and is currently without function. Viewing possible by appointment. Fjdpsy Ax T Usfx Ak Uepl

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm Fjdpezmy Tbofx Ak Uopl

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Height of travel: 650 mm 2x machine cutting torches Fpodpfx Akjf Ncado Uel with cutting table (2-part)

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Furnishing: Cutting area 1,525 x 3,050mm Consisting of guiding machine, CNC control Fedpfxoiid Hwj Ak Uepl Plasma torch holder incl. torch height control, incl. Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!