Condition: good (used), Year of construction: 1988, Functionality: fully functional, • Maximum turning diameter (over bed): up to 300 mm • Maximum turning length: up to 500 mm • Spindle bore: 51 mm • Maximum spindle speed: 5500 rpm Debvbf Iswatmds Dout • Axis travel: • X: 215 mm • Z: 438 mm • Turret head: 12 positions, VDI 30 tool holders • Control system: Vickers Acramatic 2100 or FANUC 21i-T (depending on version) • Main motor power: 7.5 kW • Machine weight: approx. 3500–4000 kg

Condition: used, Year of construction: 2014, Functionality: fully functional, Cnc FANUC Series 31i – MODEL B Max. diam. workable from bar mm 51 Max. workable length mm 230 MAIN SPINDLE Max. rotation speed rpm 5000 ASA spindle nose 5" Spindle hole mm 59.5 Internal diameter of bearings mm 90 Motor power kW 15 COUNTER-HEAD Max. rotation speed rpm 5000 ASA spindle nose 5" Spindle hole mm 55 Useful through hole mm 45 Duebvbf Ijwari Re Det Internal diameter of bearings mm 90 Motor power kW 11 UPPER LEFT TURRET 1 UPPER RIGHT TURRET 2 LOWER TURRET 3 Number of positions 12 Rotation speed rpm 4,000 Motor power Kw 3.7 Rotation time (1 pos) sec 0.15 Max. stroke Y axis mm 90(-40/+50) COOLANT Tank capacity l 450 Total power of electric pumps kW 4.8 DIMENSIONS - WEIGHT Overall dimensions with chip evacuator mm 5033 x 2100 x 2458 h Weight with conveyor kg 8200

Year of construction: 1979, Condition: good (used), For sale comes: 1 piece used head lathe Manufacturer: WMW Niles Type: DP1/S2 BJ: 1979 Duebvjnl D U Sobf I Djt Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Free location Saxony

Condition: excellent (used), Year of construction: 2008, Two Emag vertical lathes. Built in 2008 and 2004 Dobvbsv Sk Hgof I Deut Fanuc control system Lifetool available for driven tools Automation interface Additional inputs and outputs / M-functions Shuttle operation Machine was never operated wet (always dry)

Condition: used, Year of construction: 1988, Technical details: Dusbvbfev Sabgo I Dot faceplate diameter: 1250 mm swing diameter: 1600 mm turning height: 1150 mm max. ram stroke: 700 mm faceplate turning speed range -stepless-: 3,15 - 250 U/min max. workpiece weight: 10000 kg feed per revolution: 0,03 - 6,3 rapid traverse speed: 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 16,5 t dimensions of the machine ca.: 6 x 4 x 4 m

Condition: used, Year of construction: 1997, Bar diameter: 12 mm Duebvsv Sixnsbf I Dot Spindle bore: 14 mm Turning length: 135 mm Speed: 100–12,000 rpm Number of tools: 5 + 3 + 2 Control: Fanuc 16 Number of axes: 4 Total power requirement: 2.7 kW Machine weight: approx. 1,300 kg

Year of construction: 2010, Condition: ready for operation (used), Turning diameter over bed/face slide/crank: 460mm/258mm/785mm, center width: 1016mm, bed width: 300mm, spindle bore: 58mm, speed: 2000rpm, diameter lead screw/quill: 35mm/65mm, quill adjustment: 127mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1200mm, weight: approx. 1650kg. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025. Dujbvbowal H Aef I Dot

Condition: good (used), Year of construction: 2010, Conventional lathe, center high 254 mm, between centers 1000 mm, bore Ø 80 mm, 12 speed 30 - 2200 rpm, motor 5,5 kw, camlock 6'', dimensions 230x115x165 cm, weight ca. 1750 kgs; equipement: DRO on 2 axis, coolant device, 3-jaws chuck Ø 250 mm, rotating pin, tool post MULTIFIX C with toolholders, steady and following rest Duobvbjtv Iy Esf I Dst

Condition: good (used), Year of construction: 2011, operating hours: 32,000 h, For sale: 3 used precision lathes Manufacturer: Weiler Werkzeugmaschinen GmbH Type: DZ65 (pictures 1 - 12), DZ65/H1 (pictures 13 - 20), DZ65/H1 (pictures 21 - 28) Debjvk Tg Tevbf I Djut Year of manufacture: 2011, 2009, 2009 Operating hours: 17,324, 31,298, 31,720 Control: Siemens Sinumerik 840D Turret head capacity approx.: 12 pieces Turning diameter, max.: 560mm Spindle speed: 5000 1/min Travel paths: X-axis: 207 mm Z-axis: 530 mm Chuck: RÖHM, d200 mm Chip conveyor Handwheel Documentation Machines are in a very well-maintained condition and can be viewed in our warehouse. Current new price per machine approx. EUR 369,000 net.

Condition: used, TRAUB TB-42 with turret mill Dobjwaly Asvbf I Dsut

Condition: good (used), Year of construction: 1990, 2 UNITS available CONTROL FANUC 0 CNC Lathe Technical details: Turning diameter 165 mm Turning length 200 mm Control Fanuc 18 TB X-axis 2x 195 mm Z-axis 265 (B 780) mm Dusbod S U Dgsvbf I Djt Bar passage 50 mm C-axis 0,001° Turning speeds: 50-5.000 U/min Tool turret with 12 work positions 2 x12 Turning speeds : 180-3600 U/ min Accessories: Chip conveyor

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 42842, This machine was taken in payment by us from: Herbert Hänchen GmbH Dobvjqy Efzjbf I Deut 73760 Ostfildern Mrs. Jana Schneider Phone +49 711 44139-152 rebuilt by the company Grünewald Condition: Functional

Condition: used, Year of construction: 2012, turning diameter 320 mm turning length 810 mm control MAPPS main spindle: max. turning speeds 5000 min/-1 drive capacity - main spindle 22 kW max. rod diameter 65 mm sub spindle: max. turning speeds 6000 min/-1 weight of the machine ca. 8,5 t In our estimation, the machine is in very good condition and can be viewed live by appointment. technical features: - 2 pcs. Revolvers, 16 places each - counter spindle - driven tool stations - 2 pcs. Y-axis - Extensive accessories included in the scope of delivery Debsvdt I Rovbf I Djut Accesories: - bar loader Changes and errors in the technical data and information as well Subject to prior sale!

Condition: good (used), Year of construction: 1968, Functionality: unexamined, turning diameter: 1,500 mm, For sale: 1 used head lathe / facing lathe Manufacturer: Heyligenstaedt GmbH Werkzeugmaschinenfabrik type: 505ev/500 YEAR OF MANUFACTURE: 1968 Diameter face plate: 1.500mm incl. documentation Dobvbsr Nzm Tef I Dsut The machine can be inspected in our warehouse in 09599 Freiberg.

Condition: used, turning length: 750 mm, Conventional lathe ZMM C5 with Dsbvbf Iswalu Te Djut DUPLOMATIC TA-80 Copying attachment

Condition: good (used), Year of construction: 1996, machine/vehicle number: 6946, CNC lathes with maximum bar capacity 50,8mm and machining length 584,2 mm Dobvbjd S U Drof I Dsut

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, machine/vehicle number: 120160, turning length: 925 mm, turning diameter: 480 mm, total height: 1,990 mm, total length: 3,350 mm, total width: 1,800 mm, power: 0.032 kW (0.04 HP), Equipment: documentation/manual, From trade-in from a long-standing existing customer Debeqy Edgovbf I Djut

Condition: used, Year of construction: 2020, centre distance 1000 mm centre height 200 mm greates pass round over bed 400 mm swing over plan sled 220 mm movement longitudinal 900 mm travel path across 220 mm cross slide width 150 mm turning speeds 50 - 4000 U/min drive capacity - main spindle 100/40% ED 7,5/10 kW torque 108 Nm spindle diameter in front bearing 800 mm chucking diameter 200 mm faceplate diameter 260 mm feed x/z 0 - 8000 mm/min rapid traverse (x/z) 10 m/min diameter of quill 50 mm Inner cone of the quill MK3 mm quill stroke 120 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Duobvbfovza Eke I Dst Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. X/Z travel 195mm/560mm. Fitted with 215mm diameter. 3 jaw-powered chuck 12-station turret. Tailstock. Tool setter. Djbvbfsvfm H Ao I Dout Part catcher.

Condition: used, Year of construction: 1987, control Traub System TX 8D swing diameter over longitudinal slide 660 mm swing over plan sled 445 mm turning length 1000 mm spindle passage 80 mm spindle tunring speed 2.000 U/min number of tool places 14 Pos. chucking diameter 250/315 mm Number of working hours ca. 39794 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Dujbvbf Isv Ig D To Det Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2011, x-travel 745 mm z-travel 300 mm control Sinumerik 840 D turning speeds 6.000 U/min tool taper VDI 40 number of tool places 12 Pos. workpiece diameter 250 mm In our opinion, the machine is in good used condition and can be viewed under power by appointment. Technical features & accessories: - lateral workpiece feed and discharge - chip conveyor KSS - cooling system KSS Type SV0.3 + KBF600 Year of manufacture 2021 - feeding system There are another 3 identical machines from 2007 available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale! Debvbf Ijvw D Afs Dout

Condition: used, Year of construction: 2014, Control Siemens 840DSL max. swing diameter 420 mm max. turning height 300 mm main spindle: max. turning speeds 3400 min/-1 drive capacity - main spindle 45 / 35 kW max. torque 775 / 600 Nm chucking diameter 315 / 400 mm tool turret: number of tool places 12 Pos. Shank diameter 40 mm travel: x-axis 850 mm z-axis 315 mm feeds: rapid traverse (x/z) 45 / 30 m/min weight of the machine ca. 10,0 t dimensions of the machine ca. 4,2 x 1,5 x 3,5 m In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - driven tools - c-axis - Capacity for pieces diameter 30 to 160 mm : 32 [pos] - Capacity for pieces diameter 120 to 220 mm : 24 [pos] - Capacity for pieces diameter 120 to 340 mm : 16 [pos] The scope of delivery of the machine does not include a clamping device. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale! Duebvjvki Rnjbf I Dot

Condition: used, Year of construction: 2007, x-travel 738 mm z-travel 240 mm swing diameter 200 mm turning height 275 mm Control Siemens Sinumerik spindle tunring speed 6500 U/min numbers of tools in magazin 12 total power requirement 82 kW weight of the machine ca. 14 t In our opinion, the machine is in good used condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Djbvbf Ijvdt N Uo Deut of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2012, turning diameter 140 mm turning length 630 mm control Siemens 840 SL max. swing diameter over bed 250 mm main spindle: turning speed range - main spindle 0 - 5000 min/-1 max. torque 256 Nm spindle bearing diameter 110 mm spindle bore 52 mm spindle head Gr. 6 DIN 55026 chucking diameter max. 250 mm tool turret: number of tool places 3 x 12 Pos. tool taper VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm max. workpiece weight 20 kg max. workpiece diameter 140 mm travel: x-travel 300 mm z-travel 740 mm feeds: rapid traverse x 45 / z 30 m/min total power requirement 70 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 6,5 x 3,5 x 4,4 m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock Debvevdt E Aobf I Deut - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm main spindle: max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 tool turret: number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: Dujbvbevdt H Hef I Det - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!