Metal lathe

Rogi WM460Ax1000

Condition: new, Year of construction: 2024, 600 kg load capacity Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display Psdpfxog Tdpgo Ah Hogg very robust

Condition: new, Precision Center Lathe and Center Lathe Make: OPTIMUM Model: OPTiturn TZ 4V Item No.: 3432245 Condition: New machine Pgedeg Hkmrspfx Ah Heg center height: 200 mm center width: 800 mm speed: 50 - 3.000 rpm infinitely variable via 2 gear steps with SIEMENS Inverter-Vario-drive equipped as standard with: - 3-axis digital display DPA 32 - digital speed display in headstock - fixed center point MK 3 - quick change tool holder size B - turning toolholder BD - reducing sleeve MK 6 / MK 3 - steady rest fixed ø 10 - 130 mm - steady rest travelling ø 10 - 100 mm - Coolant device - Chip tray, extendable - LED machine light - Operating tool

Condition: new, Year of construction: 2025, machine/vehicle number: 0000, We offer complete revised FAT Lathes, in factories geometry, bed ground by FAT, new electrics, TUR 630 M x 2000 or TUR 630 M x 3000 Podpfx Aenqzaioh Hjgg TUR 630A x 3000 or TUR 630 A x 4000 spindlebore 140mm , 2 chucks 400 mm Bison Machine deliverytimes 3 - 4 Months after written order Accescories as per Customer specifications

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 500 mm turning diameter over support: 280 mm turning length: 1500 mm Pgedpfsu Ixznox Ah Hjg centre distance: 1500 mm turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Steel plate Ø 705mm with offset threaded holes *

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 260 mm Center distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Pjdpfoh Rvxhex Ah Hogg Drive power: 7.5 kW Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: good (used), Year of construction: 2007, Gebruikte 3-meter kantbank van LVD Type: PPEB 135 30 Capaciteit: 3100 x 135 ton Pgsdpfxewz I Raj Ah Heg Cadman CNC-besturing Y1, Y2, X, X1, R, Z1 en Z2 CNC-bombering Hoekmeetsysteem (niet aangesloten) Wila hydraulische boven- en onderklemming

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine Podpfeirax Usx Ah Hjgg -Clamping table: 400 x 1100 mm -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: used, turning diameter / mm turning length / mm swing diameter over bed slide / mm Technical data - Model 230 DIMENSIONS Centre height on the bed: 230 mm Spacing between centres: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Largest turning Ø: on the bed: 465 mm on the carriage: 278 mm on fixed steady rest: 200 mm on travelling steady rest: 160 mm CROWNING Width of the crank: 300 mm Distance between face plate edge and offset: 150 mm Largest turning Ø on the offset: 690 mm SPINDLE Ø of front bearing (inside): 110 mm Ø of rear bearing (inside): 95 mm Ø of hole: 77 mm Mounting Type - Cam Lock: 6" Internal spindle taper - taper: 1 : 20 Spindle taper - C. M. - N.: 5 Speed ranges: Slow feed - rev. 1': 15÷1000 Pedpfxowz Ryws Ah Hsgg Normal feed - rev. 1': 22÷1500 Fast feed - rev. 1': 30÷2000 FEEDS (without gear change)-N.: 108 Longitudinal feed range at revs. : 0.04÷4 mm Transverse feed range at revolution: 0.02÷2 mm Lead screw - Ø: 40 mm Lead screw pitch: 12 mm THREAD (without gear change) Metric - N. 54 to: 0.5÷28 mm Module - N. 54 to Module: 0.25÷14 Whitworth - N. 54 to Wt. x 1": 56÷1 Diametral Pitch - N. 54 to D.P.: 112÷2 Inch - N. 54 to Inch: 1/32 ÷ 13 3/4" SPINDLE PIT Quill Ø: 75 mm Quill barrel: 220 mm Quill taper - vices N. 5 POWER Main motor - HP: 10 Pump motor - HP: 0.25 WEIGHT approx. - kg 2000-2220 2530-2720 2920 ON REQUEST Main motor - HP

Condition: excellent (used), Ansemi parallel lathe, Mono FAP 325 ES type, distance between centres mm1500, centre height mm 325, bar passage mm65, motor power kw18, dimensions mm: 3300x1200x1700h weight kg3260 Pgedpfx Ahswcd Hms Hsg

Condition: new, Center length ----- 1000 mm Center height ----- 180 mm Spindle diameter ----- 360 mm Main spindle passage ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 KW Weight ----- 1000 kg INCLUDED * 3-axis digital readout brand SINO * Quick-change chisel holder type Multifix TOOE5 with 4 pockets * 3 Chuck 200 mm * 4 Chuck 200 mm * Clamping plate 250 mm * LED working light and cooling system * Fixed and moving glasses Pgjdoga Ty Eepfx Ah Hog HEAVY DUTY VERSION WITH CAST IRON FRAME