Condition: excellent (used), Year of construction: 2021, operating hours: 5,800 h, Functionality: fully functional, machine/vehicle number: A320A/2935, Accessories: Documentation Various tool holders, clamping sleeves, etc. MH 500 chip conveyor Coolant system with high-pressure pump CO2 fire extinguishing system Parts catcher Signal lamp Counter spindle Interface for bar loader FMB minimag 20 / 3200 "C" bar loader C-axis Hydraulic unit Dksln Icswdukro Svel Collet chuck Available from approximately July-August 2025

Condition: new, Year of construction: 2025, Attention - Promotion!! Completely free first warranty inspection - special offer only for Customers who took part in the show before purchase - at the Otinus machine showroom in Bydgoszcz. CNC lathe HLC-4055 on Fanuc 0i TF control Machining range: - Max. turning diameter over bed: Φ 560 mm - Max. turning diameter over support: Φ 320 mm - Max. turning diameter: Φ 400 mm - Max. turning length: 548 mm - Distance from spindle center to ground: 980 mm - Travel range in X axis: 210 mm - Travel range in Z axis: 610 mm Tool head: - Turret type: Hydraulic V12 - Outer dimension: 25x25 mm - Inner diameter: Φ 40 mm - Indexing time: Φ 0.55 s Spindle: - Drive type: Belt transmission - Maximum spindle speed: 4500 o/min - Power consumption - 15 min: 11/15 kW - Torque - 15 min: 140/250 Nm - Spindle nose: JISA2-6 - Spindle through hole: Φ 76 mm - Maximum workpiece diameter: Φ 50 mm - Spindle front bearing diameter: Φ 100 mm - Spindle diameter: 208 mm Feed speed: - Rapid traverse X: 24 m/min - Rapid traverse Z: 30 m/min - Servo motor power X/Z: 1.8/1.8 kW Tailstock: - Tailstock quill diameter: Φ 100 mm - Centering type: MT NO.4 - Quill stroke: 120 mm - Travel range: 410 mm Other parameters: Dkjln Ic Sowdt Szovel - Control: FANUC - Power supply: 25 kVA - Coolant tank volume: 200 l - Machine weight: 4.5 t - Dimensions [length × width × height]: 4200×2050×1850 mm

Condition: repair required (used), Year of construction: 2003, operating hours: 34,343 h, Functionality: limited functionality, machine/vehicle number: 938378, turning diameter over cross slide: 210 mm, turning length: 580 mm, turning diameter: 210 mm, spindle bore: 51 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 455 mm, spindle motor power: 7,500 W, bar diameter: 51 mm, The device is mechanically in good condition. All components are working. The problem with the turret - controls tools but does not lock them. All other functions work fine. Dksln Icsulvtus Svsl

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Weiler Center Lathe Model Condor 81 Lead and Feed Lathe with 3-Axis Digital Readout from K&C NEW Technical Specifications: >> Year of Manufacture 1983 Machine No. 83-067 >> Center height 165 mm >> Center width 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MT 3 >> Feed rates from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametrical pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be switched on >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12-month manufacturer's warranty with operating instructions Functions: mm/inch switching, ABS/INC coordinate selection, halving of the display value, reference mark, 200 tool programming, cone calculation, radius/diameter, quick zeroing, counting direction switching >> 1 new three-jaw chuck, 160 mm, 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, 1 mm increments >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear panel >> Coolant system >> Machine feet About the machine: Dksln Icewb Supo Svjl Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new 3-axis digital readout from K&C makes work even easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was also performed. This newer generation of Weiler lathes is very user-friendly. Take advantage of the opportunity to view and try out this machine live on-site.

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 Dksln Icev Iplae Svel tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: used, turning diameter: 560 mm, center width: 2,000 mm, spindle speed (max.): 1,800 rpm, bed width: 432 mm, overall weight: 4,000 kg, three-jaw chuck diameter: 315 mm, Used universal lathe FAT Poland Model: TUR 560 x 2000 three-jaw chuck' Digital readout 2 axes Multifix Doln Iouqw Nbjc Svekl center

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm Djlnsv Irgyo Ic Svekl total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Condition: excellent (used), Year of construction: 1992, Gildemeister GM20/6 Multi-Spindle Screw Machine Mfd. 1992 6 Spindles Capacity: 25mm Chip Conveyor Stock Reel and Stand Dkeln Icjwa D T Io Svsl Pickoff Threading Polygon attachment Frontal Milling Part ejection Bar feed IEMCA PRA 40/42/P

Condition: excellent (used), Year of construction: 1990, Model: 40N Year: 1990 Control: Mazatrol T32-2 Swing over Bed: 540mm Dsln Iowb Hc Ioc Svskl Distance Between Centres: 1500mm Spindle Speeds: 6 – 3000 RPM Spindle Bore: 81mm dia. Machine with: 15 station Indexing Turret Hydraulic SMW Steady 3 – jaw power chuck (15” dia.) Tool Pre Setter

Condition: used, Year of construction: 2004, HARE 8 HPIT INDEXING TABLE ASSEMBLY PRESS MAKE HARE, MADE IN ENGLAND MODEL 8 HPIT YEAR 2004 STROKE LENGTH 100.0 mm CAROUSEL 6 STATIONS PLUS 6 STATION AUTOMATIC CAROUSEL 8 TONS HYDRAULIC RAM SICK LIGHT GUARDS Djlswb E Tfon Ic Svekl FULL SET OF MANUALS

Condition: good (used), Parts shown by hand not come. Technical details shown on picture. Djlswb Epton Ic Svjkl

Condition: like new (used), Year of construction: 2015, spindle bore: 105 mm, turning diameter: 710 mm, center height: 355 mm, turning length: 1,500 mm, Turning diameter in gap: 960 mm, SN 710S x 1500 Year of manufacture 2015 4 jaw faceplate Acu Rite digital display Coolant tank Longitudinal stop Deln Isvq Ibxoc Svekl Chip guard at the rear Chuck guard

Condition: used, Year of construction: 2012, turning diameter 400 mm Doln Icsvxwx Aj Svjkl swing diameter 420 mm x-travel 850 mm z-travel 315 mm spindle head DIN 55026 - Size 11 spindle bearing diameter 140 mm turning speeds max. 4000 U/min tool turret 12 times C5 Capto rapid traverse x + z axis 45 / 30 m/min feeding force 11 kN total power requirement 58 kW weight of the machine ca. 9 t dimensions of the machine ca. 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available

Condition: excellent (used), Year of construction: 2016, Tornos MultiSwiss 6x16 CNC Multi-Spindle Screw Machine Mfd. 2016 6 Spindles Diameter:16mm Fanuc Control Equipped as pictured Run time: 42,689 hrs Deln Iewa D Tuoc Svokl Power on: 64,668 hrs Standard tornos bar feed (5ft) 6 Motorspindles 5,5 kW max. speed 8’000 RPM Spindle capacity 14 mm, Z 50mm stroke (max. parts 40mm). 6 slides X 40mm stroke 1 counter-operation slide, 75mm stroke. Counter spindle with integrated motor 6 kW Max. speed 8’000 RPM, 150mm stroke. Numeric control Fanuc 30i Integrated PC with screen 17” Programming system TB DECO (DCS version) (requires 3001) contact us for more details

Condition: excellent (used), Year of construction: 2010, MAZAK SLANT TURN NEXUS 550M 3000U Max. swing diameter: 1,040 mm Max. machining diameter: 910 mm Max. machining length: 3,000 mm Max. milling speed: 4,000 rpm Max. spindle speed: 2,000 rpm Machine is equipped with: - CNC CONTROL Mazatrol Matrix - KITAGAWA three-jaw chuck B-24, diameter 610 mm - Tool Eye - C-axis - Programmable tailstock - Hydraulic SMW steady rest - Reinforced coolant pump Djln Ic Sjv Dxlbovskl - Chip conveyor, side ejection - Various fixed and driven tool holders

Condition: good (used), Year of construction: 2007, turning length: 600 mm, turning diameter over cross slide: 300 mm, spindle speed (max.): 5,000 rpm, CNC turning center Delnevzyvcs Ic Svjkl Manufacturer: Doosan Type: Puma TT1800 SY Year of manufacture: 2007 Control: Fanuc 18i-TB Technical data Turning length: 600 mm Turning diameter over bed: 300 mm Turning diameter over slide: 230 mm Speed: 5000 rpm C-axis: 0.001 degrees Turret Number of rovers: 2 Number of tools: 12 x 2 Driven tool stations: 12 x 2 Bar loader Chip conveyor Coolant preparation/filter system Weight: 7800 kg

Condition: good (used), Parts shown by hand not come. Dkslewb Em Sjn Ic Svjl Technical data shown on picture.

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : 210 - 370 mm 365 - 520 mm Dkolneu Tvdbs Ic Svol Only available as a set

Condition: used, Year of construction: 1996, turning diameter over bed 710 mm turning dia. over face-slide 420 mm turning length 2000 mm control Manual Plus 3110 Heidenhain spindle bore 92 mm main spindle speeds: 16 - 1800 U/min cross movement 385 mm spindle head DIN 55027 - Size 11 spindle diameter in front bearing 140 mm Dkelevxwlven Ic Svjl power capacity at 100 % load 22,00 kW 2750 Nm feed x/z-axis 1 - 5000 mm/min rapid traverse X-axis 6,00 m/min rapid traverse Z-axis 8,00 m/min tailstock quill taper MT 5 quill stroke 210 mm diameter of quill 110 mm total power requirement 40,00 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 5,00 x 3,00 x H2,50 m

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders Dkoln Iceq Npqmj Svsl 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: reconditioned (used), Year of construction: 2001, MAZAK SUPER QUICK TURN 200M x 500 Max. machining diameter: 300 mm Max. machining length: 538 mm Max. spindle speed: 5,000 rpm Max. milling speed: 4,500 rpm Max. bar diameter: 51 mm Machine is equipped with: - CNC CONTROL Mazatrol PC Fusion CNC 640T - KITAGAWA three-jaw chuck B-208, diameter 210 mm - Tool Eye - C-axis - Interface for bar loading magazine - automatic part catcher - NC tailstock - reinforced coolant pump - chip conveyor Doln Icovw Auto Svokl - 8 fixed tool holders - 2 driven tool holders

Condition: good (used), center height: 1,050 mm, center width: 3,000 mm, Lathe Heyligenstedt brand Faceplate diameter 1720 mm Center height 840 mm in the offset 1050 mm Center width 3000 mm Anima digital display Deln Iowb Dx Hec Svokl Space requirements: Length 6000 mm Width 2700 mm 2000 mm without support Height 2200 mm Motor 380 volts 24/18.5 kW The machine can be inspected with power at the supplier's factory.

Condition: used, Year of construction: 1999, turning diameter 570 mm turning length 2340 mm control SIN 840 D turning diameter over slide rest 345 mm spindle head DIN 55027 - Size 8 spindle bore 62 mm tailstock quill taper MT 5 Dslnjvxwmas Ic Svekl spindle turning speed range 3 - 2.500 U/min total power requirement 35 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 4,85 x 2,10 x 2,00 m extended machine bed steady rest chip tray coolant device 4-jaw chuck

Condition: good (used), SPİNDLE HOLE DİA 1.3" POWER 7.5 hp RPM 8,500 RPM # AXİS 8 CONTROL CNC (FANUC 32i-B Plus) Machine concept Number of linear axes + C-axes 6 + 2 Number of spindles 2 Number of channels 2 Dkelnsrbl N Es Ic Svel Main spindle Maximum bar capacity mm | in 32 | 1.26 Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 7.5/5.5 | 10.1/7.4 S2 15 min/S1 Torque (S2 30 min/S1) Nm | ft lbs 51.9/40.4 | 38.3/29.8 S2 15 min/S1 Counter spindle Maximum bar capacity mm | in 32 | 1.26 C-axis (0.001°) Speed rpm 8,500 Power (S2 30 min/S1) kW | hp 3.7/2.2 | 5.0/3.0 Torque (S2 30 min/S1) Nm | ft lbs 23.6/14 | 17.4/10.3 Working area/ travels Z1 travel (spindle travel) mm | in 100 | 3.94 Tool carrier 1: X1/Y1 travel mm | in 70/405 | 2.76/15.94 Counter spindle: X2/Z2 travel mm | in 300/200 | 11.81/7.87 Tool carrier 2: Y2 travel mm | in 135 | 5.31 Rapid traverse speed on linear axes X1, Z1, X2, Z2/Y1, Y2 m / min | in/ min 40/30 | 131/98 Acceleration in linear axes m /s² | ft 5 | 0.02 Tool holder on slide 1 Fixed turning tools 6 Tools for front machining/back-working 4/4 Driven tools 2 + 2 Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Maximum speed rpm 4,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 5.25/4.5 | 3.9/3.3 Tool holder on slide Y2 On station for back working Fixed/driven tools for back-working 4/4 (5/4)* Maximum speed rpm 6,000 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Tool holder on slide 2 Fixed/driven tools for back-working 2/0 (0/2)* (0/1 for polygons)* Maximum speed rpm 4,250 Power (S3 40 % /S1) kW | hp 1.9/1 | 2.5/1.3 Maximum torque (S3 40 % /S1) Nm | ft lbs 3.5/3 | 2.6/2.2 Machine Footprint m² | ft² 2.8 | 30.1 Machine height mm | in 2.085 | 82.09 Machine weight (including coolant tank) kg | lbs 3,550 | 7,826 Control system DMG MORI SLIMline Control with 10.4″ monitor FANUC 32i Automatic turning with 6 linear axes and 2 C-axis Main spindle with 8,500 rpm, 29.8 ft lb, 7.4 hp Counter spindle with 8,500 rpm, 10.3 ft lb, 3 hp Total of 41 tool stations 8 driven tool stations as standard Driven tools spindles 6,000 rpm, 2.2 ft lb, 1.3 hp Control panel with 10.4" color display and FANUC 32i-B Plus 2 control channels, 6 linear axes and 2 C-axes Tool Monitoring System with graphical tool load display as option Up to 2 tools working simultaneously EQUIPPED WITH: Patriot 338 Edge Bar Feed Sliding Headstock Belt Type Chip Conveyor

Condition: used, Year of construction: 2009, turning diameter 320 mm turning height 180 mm Control SIEMENS 840 D chucking diameter 315 mm 0 4 U/min 1 mm rapid power traverse in X-and Z direction 60/30 m/min Dksln Icjvxwk Ss Svol tool turret with 12 work positions VDI 50 total power requirement 65 kW weight of the machine ca. 13,5 t dimensions of the machine ca. 5,5 x 3,2 x 3,3 m