Used Crambo 3400 for sale (563)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 204778-553, total width: 3,200 mm, type of input current: three-phase, input current: 19 A, input voltage: 400 V, Equipment: documentation/manual, For Sale: Klieverik Calendar Fgedpfx Amozrgfnszoi We are offering our Klieverik calendar machine for sale. The machine is fully operational and available for inspection. Reliable calendar machine from Klieverik, the Netherlands. Industrial quality with specifications of approximately 10 kW power, 400V, and 50/60 Hz operation. Well-maintained and fully functional.

Condition: used, Year of construction: 1998, No minimum price – guaranteed sale to the highest bidder! DDMQ-F I I 390 TECHNICAL DETAILS Capacity: 10–100 pieces/min Cutting length: 140–350 mm Max. cutting length: 900 mm Product width: max. 200 mm Product height: max. 80 mm Film width: max. 600 mm Film outer diameter: max. 300 mm MACHINE DETAILS Rated power: 30 A / 6 kW Dimensions & Weight Dimensions (L x W x H): 5,125 x 1,400 x 1,450 mm Weight: approx. 1,100 kg Power supply: 3-phase, AC 200 V Permissible voltage fluctuation: ±10 % FUJI DDMQ-F 1 3391 TECHNICAL DETAILS Capacity: 10–200 pieces/min Cutting length: 90–150 mm Max. cutting length: 900 mm Product width: max. 140 mm Product height: max. 40 mm Film width: max. 430 mm Film outer diameter: max. 300 mm MACHINE DETAILS Rated power: 30 A / 6 kW Dimensions & Weight Fjdpfx Ame Ahgluozjgi Dimensions (L x W x H): 4,625 x 990 x 1,450 mm Weight: approx. 1,000 kg Power supply: 3-phase, AC 200 V Permissible voltage fluctuation: ±10 %

Condition: used, Year of construction: 2014 Operating hours: 7.606 Fgodpfj Agvf Hex Amzoi Field of application: Recycling Empty weight: 23.000 kg Availability: in stock Used Komptech Crambo 5200 EC Direct for sale at Chess This 2014 Komptech Crambo 5200 EC Direct has 7,600 operating hours and is powered by a 6-cylinder CAT C13 diesel engine (329 kW). It is a slow-speed twin-shaft shredder: two counter-rotating shafts with heavy-duty shredding teeth work against a cutting comb. The direct mechanical drive transfers engine power straight to the shafts (2820mm length) giving high efficiency and low fuel consumption. The machine sits on a crawler undercarriage so it is easy to move around the yard or site. It has hydraulically folding hopper sides for loading by wheel loader or excavator a long folding discharge conveyor and a central lubrication system This machine has only been used for green waste at a district heating plant and it is in very nice condition both optically and mechanically. At around 5,000 hours it received new shafts a new transmission a new belt and a new undercarriage. Zeppelin has maintained the CAT engine and the next service is due in 400 hours The Crambo is a robust all-round shredder for green waste wood waste roots and stumps biomass for energy plants and bulky or commercial waste Komptech Crambo ready for inspection at our yard. For more information please contact us!

Condition: used, Year of construction: 2002, Nordson Heißleim Gerät 3400 V 2002 capacity / hour ca.: 1500 Fsdpfo Aiwy Dex Amzsgi Strom / Volt: 380

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 23423676, Equipment: type plate available, Fronius VarioSynergic 3400 G/W/E welding machine Fodpfx Ajym Rq Ssmzegi 6 pieces available, the price is per piece. In working condition. The data can be seen from the nameplate. Purchase is only possible for legal entities.

Condition: excellent (used), Year of construction: 2008, operating hours: 26,033 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 75 mm, clearance between the columns: 710 mm, displacement volume: 1,657 cm³, plate length: 1,010 mm, plate height: 1,010 mm, total length: 7,200 mm, total width: 1,750 mm, total height: 2,420 mm, overall weight: 16,400 kg, Equipment: documentation/manual, BATTENFELD TM 400-3400 Stock No.: 503220 Manufacturer: Wittmann Battenfeld Type: TM 400-3400 Control: UNILOG B6S Year of Manufacture: 2008 Operating Hours: 26033 h Technical Data, Clamping Unit Clamping Force: 4000 kN Tie Bar Distance h x v: 710 x 710 mm Platen Size h x v: 1010 x 1010 mm Minimum Mold Height: 300 mm Maximum Mold Height: 710 mm Maximum Mold Opening: 1380 mm Opening Stroke: 670 mm Ejector Stroke: 200 mm Ejector Force: 59 kN Centering of Moving Platen D: 160 mm Centering of Fixed Platen D: 160 mm Technical Data, Injection Unit Screw Diameter: 75 mm Injection Volume: 1657 ccm Injection Pressure: 2022 bar Screw Length: 22 l/d Screw Stroke: 375 mm Screw Speed: 178 min Screw Torque: 3759 N Plasticizing Rate: 67 g/s PS Free Injection Flow Rate: 346 g/s PS Nozzle Distance: 600 mm Dimensions & Weight Machine Dimensions L x W x H: 7.2m x 1.75m x 2.42m Total Weight: 16400 KG Equipment Multi-Language Screen Display Fodez A U Rqopfx Amzsgi CEE Socket 16A Hydraulic Core Pull 1x Air Valve 1x Leveling Elements EUROMAP 67 Handling Interface USB Interface Schuko Socket 16A

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 675149, center height: 175 mm, grinding length: 8,000 mm, center width: 1,000 mm, grinding wheel diameter: 450 mm, total width: 1,700 mm, total length: 3,000 mm, grinding diameter: 349 mm, workpiece weight between centers: 100 g, distance between centers: 1,000 mm, type of input current: three-phase, feed length X-axis: 320 mm, feed length Z-axis: 1,000 mm, overall weight: 3,500 kg, year of last overhaul: 2022, input frequency: 50 Hz, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 800 rpm, Control System Control system manufacturer: FANUC Control system type: FANUC 31i Working area Center height: 175 mm Distance between centers: 1,000 mm Grinding length: approx. 800 mm Max. workpiece diameter: approx. 349 mm Electrical data according to your information Connection voltage: 3400 V Operating voltage: 3400 V Frequency: 50 Hz Control voltage: 24 V Rated current: 20.5 A Main fuse: 25T A Grinding technology according to the documentation Fgeds Ahv T Hepfx Amzei Grinding spindle power: 5.0 kW Grinding spindle speed: 800–1,900 rpm Grinding wheels: depending on the design, up to approx. Ø 450 mm X-axis resolution: up to 0.1 µm Workpiece spindle speed range: approx. 8–800 rpm Automatic indexing: provided in the UR version Further technical data from the manufacturer's documentation Max. ambient temperature: 40 °C Max. humidity: 75 % Sound pressure level: approx. 70 dB(A) Machine weight: approx. 3,500 kg Sold without tools and without additional accessories. The machine is sold exclusively in the described basic configuration. Inspection possible by appointment. Sale ex works Syntegon. Loading and transport are the responsibility of the buyer. Sales / transfer conditions: • Sale exclusively to end users / manufacturing companies (no resale to dealers) – corresponding company profile required. • Dismantling, removal, and transport are the responsibility of the buyer and at the buyer's risk. • The buyer is responsible for personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, usable tank capacity: 3,400 l, Equipment: documentation/manual, Hastelloy reactor manufactured by INSTALACIONES INDUSTRIALES GRAU, 3400 liters, with jacket and rear triple-blade agitator. Year 2019. Mounted on 3 support brackets. Manhole diameter: 495 mm. Volume Total capacity 3400 L Material Hastelloy C-276 Technical details Year of manufacture Fjdpfx Amew U Tx Uszjgi 2019 Equipment configuration Agitator Jacket On support brackets Equipment dimensions Internal diameter 1600 mm Cylindrical height 1600 mm Transport information Width 2300 mm Height 3000 mm Weight 1150 kg

Condition: used, Year of construction: 2020, operating hours: 14,167 h, functionality: fully functional, Lasertube machine ADIGE LTB.20. Base module. Machine integration for FIBER laser source with 3D head, TubeCutter, and Active Focus. Automatic bundle loader for tubes with 2500-6500 mm length. Bundle loader FIBER safety covers. Installation of the bundle loader on the front side. Pushing device for tubes on standard packs for the bundle loader. Automatic loader for single bar with 2500-6500 mm length. Front installation side. Single bar loader FIBER safety covers. Installation of the automatic loader for single bar. Loading portal main module. 6500 mm length loading portal module with four carrying arms. Loading portal FIBER safety covers. Discharge module for 4500 mm cut tube length. Fodpfe Aikyljx Amzsgi Discharge module FIBER safety covers. 6500 mm length complementary discharge module for the front side and 3400 mm length for the rear side. Complementary discharge module FIBER safety covers. In-line discharge system. 2000 mm module extension for the in-line discharge system. Discharge system FIBER integration. Parts collecting table, 3400 mm base module. Base module parts collecting table on the machine's rear side. Machine integration for IPG fiber laser source. IPG YLS-4000 fiber laser source. Chiller with closed circuit for the laser source. Fume extractor (D). Optical device for weld seam identification and orientation. Active piercing: drilling process control and optimization device. Active Scan device. Active Weld. Two webcams, for the rear loader and for the cutting area.

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual Fgjdj Ahg I Eepfx Amzsi x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Fsdpsx Ilp Hsfx Amzegi

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Fgsdpfx Ao Ain N Rsmzoi Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, CNC Machining Centre CHIRON FZ 08K S Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control: FANUC 18i-MB5 Number of axes: 7 Stroke X axis: 450 [mm] Stroke Y axis: 270 [mm] Stroke Z axis: 310 [mm] Traversing feeds X, Y and Z axes: 75000 [mm/min] Max. bar diameter in turning spindle: 32 [mm] Angular A axis stroke: 360 [°] A axis indexing precision: 0.001 [°] B axis swivelling stroke: -20° / +115 [°] B axis indexing precision: 0.001 [°] Spindle type: HSK40 Max. spindle speed: 30000 [rpm] Tool changer magazin number of stations: 40 Total power required: 17 [kVA] Fgjdpfx Ae Ahhdpemzei Supply voltage: 400 [V] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] INCLUDED EQUIPMENT: x1 RENISHAW tool probe, type TS27R x1 spindle cooling unit x1 coolant tank x1 unit for 6th-face machining x1 SCHUNK clamping vice x84 tool holders - type HSK40 x14 collets - type F35 x1 electrical cabinet air conditioning unit x1 DONALDSON mist extraction unit - type Torit DCE x1 washing gun x1 three-color status light x1 MACHINING INSTRUCTIONS manual x1 operator manual x1 programming manual Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Mikron, Hermle, DMG MORI, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, and Alzmetall, as well as CNC milling, drilling, and tapping machines, and CNC grinding machines

Condition: excellent (used), operating hours: 3,631 h, color: green, total height: 3,400 mm, total length: 6,850 mm, total width: 2,860 mm, mobility: mobile, General Information Year of manufacture: 2019 Design year: 2019 Intended uses: Forestry and terrain management Technical Information Power: 441 kW (600 hp) Number of cylinders: 6 Engine displacement: 18,100 cc Fuel type: Diesel Drive: Tracked Unladen weight: 26,700 kg Fgodpfew Eu Aqjx Amzoi Functionality CE marking: yes Condition Technical condition: very good Optical condition: very good

Condition: defective spare-parts repository (used), Year of construction: 2018, The equipment is operational, but the measuring and mixing bowl and the control panel are missing. Fodpsyhca Iefx Amzsgi

Year of construction: 2009, condition: ready for operation (used), Working width: 3200mm, roller diameter: 195mm, max. temperature: 220°C, speed: 2m/min, machine dimensions X/Y/Z: approx. 4400mm/1100mm/1500mm. Documentation available. An on-site inspection is possible. Fgedeyyy N Eopfx Amzsi

Condition: good (used), Year of construction: 2014, Ref. -No.: 10654 Manufacturer: DMG Type: DMU DMC 80 FD duoblock Year of construction: 2014 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Germany X-Travel: mm Y-Travel: 1050 mm Z-Travel: 850 mm B-Axis: 180 ° C-Axis: 360 ° Machine length: 5100 mm Machine width: 2500 mm Machine Height: 3100 mm Tool Taper: HSK - 100 Numbers Of Tools In Magazin: 243 Turning Speeds: 10000 RPM Max. Torque: 2050 Nm Feed Speeds X/Y/Z Axis: mm / min Rapid Travel X/Y/Z: 60 mm / min acceleration: 7 / 7 / 7 m/s² Fjdpfx Aj Ahmvxomzsgi Total Power Requirement: 36 kW Weight Of The Machine Ca.: 15300 t Spindle speed gear stage 1: min Spindle speed gear stage 2: min Holding torque: 3400 Nm Max. rotation of the table top: rpm Resolution of the measuring system: 0,001 ° Pallet clamping surface: Ø x 630 mm Weight of the pallet: 300 kg Feed force in X and Y axes: 13 Feed force in the Z-axis: 9 furnishing operation: 20 - 2000 m / min Further information: The machine can be viewed while it is powered on, subject to prior arrangement.

Condition: excellent (used), functionality: fully functional, Velati VbA MISCELATORE LT2000 | Multi-component mixing and feeding line / Filling mixing installation Manufacturer: Velati VbA Model / Type: MISCELATORE LT2000 Serial number: 349/88 Power: 15 + 15 HP (two mixing motor drives) Power supply: 380 V, 50 Hz Internal dimensions of the mixing chamber: 1900 x 1050 x 500 mm Working capacity of the mixer: 2000 liters Overall dimensions of the entire installation: 5000 x 4800 x 3400 mm Set components: - Two-shaft paddle mixer Velati VbA MISCELATORE LT2000 - Screw conveyor (elevator / lifting screw) Screw width: 330 mm Pitch: 290 mm - Outfeed belt conveyor Plastic belt Fjdpfe Ad Uzxex Amzjgi Belt width 500 mm - Control cabinet / distribution panel: Rittal AE 1004 - Gearbox / reducer: Bonfiglioli Riduttori MRA0 50/33 The Velati VbA industrial mixing and feeding line with a capacity of 2000 liters is a comprehensive installation designed for continuous and batch preparation of mixtures in meat processing, delicatessen, and food processing plants. The set presented consists of three integrated modules: a high-capacity, two-shaft paddle mixer (MISCELATORE LT2000), a screw conveyor (lifting screw), and an outfeed belt conveyor with a plastic belt. The heart of the set is the large-size, two-shaft mixer with a 15 + 15 HP drive, which ensures fast, uniform, and gentle mixing of meat fillings, sausages, ready meals, or vegetables without damaging the structure of the raw material. By combining the mixer with a screw elevator and an outfeed belt conveyor, the installation creates an automated process flow: it enables efficient transport of the raw material, accurate mixing, and mechanical, efficient discharge of the finished product and transfer to subsequent stages (e.g., to filling machines, formers, or cooking kettles).

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 10,649 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 1,250 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: PERKINS, fork carriage width: 1,500 mm, fork length: 1,400 mm, fork width: 200 mm, fork thickness: 70 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 10.00-20 SE, rear tire type: superelastic tires (black), rear tire size: 10.00-20 SE, overall weight: 19,400 kg, empty load weight: 12,400 kg, total height: 3,400 mm, total length: 5,000 mm, total width: 2,300 mm, color: yellow, Equipment: cabin, lighting, pallet forks, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 📌 Years of experience | 🛠️ In-house service & paint shop | 💼 Professional consultancy | 🚚 Own transport | 🤝 After-sales support Looking for a forklift you can truly depend on? We are an established dealer of new and used forklifts with a longstanding tradition. We serve clients throughout Europe – from small companies to major international industrial facilities. Our forklifts are more than just machines – they are a guarantee that your logistics will operate smoothly and reliably. ⭐ What sets us apart? ✅ Every forklift undergoes a thorough technical inspection (servicing, testing, filter and oil replacement, refurbishment of main components) ✅ Full safety inspection (UDT) available on request ✅ In-house paint and service workshop – machines perfected aesthetically and technically ✅ Europe-wide transport – performed with our own fleet and trained drivers ✅ Operator training at delivery + practical on-site demonstration ✅ After-sales service & technical support – support continues after the sale ✅ Possibility to visit & test the machine at our premises – you are welcome! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Financing assistance – we cooperate with most leasing companies ✅ Invoice in EUR or PLN – as per customer preference 🔹 Current Offer: BAUMANN GS 70/14/50 – 7 T Side Loader 📅 Year of manufacture: 2007 ⏱️ Operating hours: 10,649 h ⚡ Power: Diesel 🏋️ Capacity: 7,000 kg – load centre 700 mm 🗜️ Mast: Duplex – 5000 mm 🔧 Forks: 1200 mm 🛞 Superelastic tyres: 100% condition 🛠️ Technical condition: Excellent – after full service ✨ Visual condition: Well-maintained, rust-free, ready for work 📏 Free lift: 1250 mm Dimensions: Fedpo Aa Iwfjfx Amzjgi 📐 Truck height: 3400 mm 📐 Total length: 5000 mm 📐 Width: 2300 mm 📐 Fork positioner width: 1500 mm 📐 Overall height: 3750 mm 🏭 Ideal applications: Warehouses with narrow aisles Wood, steel, and pipe industries Handling of long goods Both indoor and outdoor operations

Condition: used, mileage: 214,694 km, power: 103 kW (140.04 HP), first registration: 12/2015, fuel type: diesel, overall weight: 3,000 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2015, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: * Body/Superstructure: Standard long wheelbase van, * Air conditioning, * Auxiliary heater (hot water) with stationary heating function, * Fuel tank: 80 liters, * High cargo area partition with window, * Windows in the cargo area: - fixed front right, * Rear tailgate with glazing, * Wooden floor, * Cargo area lining, * Workshop equipment on the left & right, Technology: * Electrical package 1, * Electrically adjustable and heated exterior mirrors, * Driver assistance system: Parking assistance system rear, * Audio-navigation system Discover Media, * Mobile online services Car-Net, * Mobile phone interface and WLAN hotspot, * Multifunction display, * 2nd battery, * Inverter, Safety/Environment: * 4x4 drive, * Airbag driver/passenger side, * ABS/ASR, * Driver assistance system: Multi-collision brake, * Suspension: Reinforced suspension and damping, * Trailer stabilization program, * Low emissions according to exhaust standard Euro 5, Other: * German initial delivery, * Engine 2.0 L - 103 kW TDI, * Wheelbase 3400 mm, * Permissible total weight 3.00 t, * COC document available Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, at the Bremen motorway junction. NutzfahrzeugZentrum Behnke constantly has approximately 200 vehicles from the fields of vans, commercial vehicles, and construction machinery in stock! Fgodpfx Ae Ail I Ssmzei We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare a customized offer for you! We are happy to accept your commercial vehicle/construction machinery in part exchange. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, price tags and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale are subject to change.

Year of construction: 1983, condition: used, Working width 3400 mm Roller width 3600 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - ebonit 100 Grad shore Pressure line 50 N / mm Pressure total 18 to Cloth guiding system for woven fabrics Breithalter, Leitwalze Drive shaft dia 80 mm Hydraulic unit for separately pressure in inox Drive side links Operting side angeben • 2-Bowls-Finishing padder with 1 new swimming-roll (s-roll) and supporting Fgsdpfx Astv Iggsmzsi roll; • new hydraulic control and pressure application for s-roll • drive motor and new electric control • machine will be completely refurbished before delivery • we grant a warranty for a period of 12 months

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, operating hours: 3,808 h, load capacity: 3,000 kg, lifting height: 3,400 mm, fuel type: gas, mast type: duplex, fork length: 1,800 mm, Equipment: head guard, pallet forks, we are offering: FRONT FORKLIFT, FORKLIFT, GAS FORKLIFT, Manufacturer: CLARK Type: GPM 30 L Load capacity 3000 kg Lifting height 3400 cm Fork length 180 cm, Year of manufacture 1988 Hours: 3808 Height 3000 mm For further details see photos Offer is aimed at tradespeople, dealers, public and church institutions! We are offering items from various acquisitions, which we describe as best as possible and provide meaningful photos. No further information about the item can be provided. Due to time constraints, we can only offer answers to this article if you provide us with a telephone number with your inquiry. This offer is used goods unless expressly described. All offers from stock 47441 Moers. Other industrial trucks in stock!! We offer the opportunity to view items on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by arranging an appointment by telephone. If required, the item can be taken away immediately. All dimensions are approximate You can also find other offers from catering, storage technology, trolleys, etc. in our shop Fsdpfx Asvx Ubzjmzogi The following applies to all offers: All information is subject to change / photos are similar Legal information

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, wood lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. Fsdpfx Aozfwm Nsmzsgi PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths for turning, as well as additional divisions and pitches for milling. Several programs can be stored for turning and milling operations. Hydraulic copy sensing of a pattern or template. The roughing and copy tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via V-belt, within the stages, operation can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 RPM Speed stage 2: 350 - 3400 RPM Distance between centers approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copy slide with V-turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release device. Numerous accessories: Ring steady rest with front turning tool and insert aid. Four-jaw steady rest. Four-jaw chuck 125mm. Copy tools, center punches, hexagonal drivers, etc. Milling unit with 3kW motor for mounting on the copy slide. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots retouched. Very good condition from a small carpentry shop. The machine apparently was not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this supplier".

Condition: excellent (used), functionality: fully functional, mileage: 230,000 km, first registration: 10/2021, fuel type: diesel, empty load weight: 3,400 kg, overall weight: 10,000 kg, tire size: 245/70 R17,5, axle configuration: 2 axles, axle spacing: 4,100 mm, fuel: diesel, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, suspension: steel-air, total length: 5,620 mm, total width: 2,550 mm, total height: 2,500 mm, Year of construction: 2021, FL cab, spoiler, sun visor, fog lights in the bumper, 210 hp engine, Euro 6, automatic transmission, air conditioning, rear tires, wheelbase 4100 mm, cargo box with side rails and adjustable tarpaulin, 5650 mm height, aluminum side boards H600, 231,000 km, payload: 3400 kg; registration date: 10/15/2021. Excellent overall condition. Fjdpfx Ae Aivkdjmzsgi

Condition: used, mileage: 230,109 km, power: 150 kW (203.94 HP), first registration: 08/2017, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 09/2027, color: green, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment: * Body/Superstructure: Box van, large volume, * High roof in vehicle color * Dual-clutch transmission DSG * Air conditioning * Auxiliary heater (hot water), programmable * Driver's seat with heating, height adjustment + lumbar support * Double passenger seat with storage compartment, * Wooden flooring * Cargo area lining * Additional cargo area ventilation in the D-pillar, * High cargo area partition with window * Rear tailgate doors (opening angle 250 degrees), * Heated rear window with wiper system, * Reinforced steel rims 17" * Fuel tank: 80 liters, Technology: * Headlights and taillights LED, * Audio-navigation system Discover Media * Steering wheel (leather) with multifunction and shift function, * Mobile Online Services Car-Net, * Voice control system, * Multifunction display Plus, * Multimedia interface 2 x USB (iPhone / iPod) with AUX-IN, * Tire pressure monitoring display * Equipment package: Light + Visibility, Fgsds Ail I Ijpfx Amzji * Central locking with remote control * Electrical package 1, * Driver assistance system: Parking assist front and rear, * Driver assistance system: High beam assist (Light Assist), * Cruise control Safety/Environment: * Airbag driver/passenger side, * Driver assistance system: Multi-collision brake, * Low emission according to emission standard Euro 6, * Start/Stop system engine, Other: * German first delivery, * 1 previous owner * Engine 2.0 Ltr. - 150 kW TDI, * Wheelbase 3400 mm, * COC document available * Inspection valid until 09/2027 * Permissible total weight 3.20 t * WV1 ZZZ7HZ JH 003539 * AT engine at * Tradesman's vehicle / signs of use Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen interchange. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles from the areas of vans, commercial vehicles, and construction machinery in stock! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We are interested in taking your commercial vehicle/construction machine in part exchange. If a new TÜV (technical inspection) is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, price tags and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale are reserved.