Cranes for sale
Your location was not identified (Edit)
lifting capacity in kg: 125 kg
arm length: m
swival range : starr °
Arm length: 3250 mm
: 3800 mm
lifting speed - idle lift downwards: > 8 m/min
electr. connected load: 400 V
connection electric: ca. 1,5 kW
protection class: IP 54
dimensions L x W x H: Traverse:3,6x1,7x2,0 m
Wall Travelling Jib Crane
- application: lifting and lowering of loads
- consists of: (similar as shown in the picture)
- electric chain hoist Lifkett with loading hook Ø = 30x100mm, single-stranded, travel distance 1600mm... more
used
Clamping buffer for manual trolley, roller trolley, crane trolley, trolley, crane trolley, crane trolley, crane trolley, girder trolley, crane runway trolley manufacturer Demag type KP-A10-3x set Clamping buffer available-Price per set dimensions 215/135/H95 mm-own weight 1.5 kg
Sapzk98 more
arm length 8000 mm
total column height 4800 /3800* mm
weight max. in kg 2000 kg
height of stroke 3800 mm
flange diameter 1350 mm
Benr3fncc7
Foundation flanges Ø: approx 1350 mm
Including pull-wire
Motoric quarter turn
Motoric movement of the pull-wire at the pivot arm
Additional information
The column is reduced by remove the middle piece (1000 mm). Then it will be reduced on a total height of approx 3800 mm.
The screwed flange can be easily changed or removed! more
lifting capacity :0,250 t
lift:3900 mm
Wthee9xx
span width:4000 mm
weight of the machine ca.:0,6 t
transport dimensions LxWxH:4,3 x 1,8 x 0,5 m more
2006
good condition (used)
GH 3.2 Tns crane bridge - Span 12.40 meters.
Mounted on gantry. Included
Perfect conditions
C9knh9a2 more
arm length 2.800 mm
weight max. in kg 1.000 kg
height of hook 2.700 mm
Yfhzrass
documentation keine
weight of the machine ca. 1 t more
lifting capacity in kg: 125 kg
arm length: mm
total column height: mm
cantilever arm length from center column: 2580 mm
height lower edge cantilever arm: 2,45 m
height of stroke: 2000 mm
swival range +/-: 90 - 135 manuell Grad
column diameter: 160 mm
total power requirement: 0,36 kW
weight of the machine ca.: 355 kg
dimensions L x W x H: 2500 x 560 x 2700 mm
- load hook adjustment min./max. 500/2400mm
- lift height 2000mm
Bc2e0hzjkm
- chasis motor driven
- travel way from hoist 1900mm (chain)
- ... more
2001
used
Pillar jib crane, hall crane, workstation crane
-Bearing capacity 1000 kg
-with chain hoist Demag type DKUN 5-500 K V1 F
Bfvsua7qym
-Unloading 3080 mm
-Total height 2340 mm
-Hook height 1525 mm
-Main stroke 4.0 m / min
-Fine stroke 1.0 m / min
-Transport Dimensions 3335/965 / H1355 mm
-Eigen weight 456 kg more
Strength: 80 kg
Total height: 3.25 m
Lifting height: 2.5 m
Console length: 2.5 m
Electrical power: 380 V
Ysnmvc more
weight max. in kg 500 kg
arm length 4000 mm
height 3425 Unterkante Ausleger
total column height 4215 mm
C0noqy9
swivelling range 270 Grad more
Demag crane / trolley DH625 H20 -10 ton with control cylinder, precision hoist.
Hook path 10.0 m.
Main hoist: 6,3 m/min
Ohp7x
Fine stroke: 0.6 m/min
reeving: 4/1
3 pieces are available. more
centre distance 5.000 mm
Yfhp908r
hook 4.000 mm
weight of the machine ca. 1,9 t
2 speeds
2 available more
lifting capacity: 0,25 t
lift: - mm
span width: mm
height lower edge cantilever arm: 3100 mm
jib length load hook end position: 3500 mm
crane classification: H2-B2
swival range : 355 °
cantilever arm length from center column: 3720 mm
lifting height max. hook position: 2400 mm
column diameter: 325 mm
dimensions base plate: 0,6x0,325-0,625 m
total power requirement: 0,9 kW
weight of the machine approx.: 760 kg
dimensions L x W x H: 3,9x0,63x3,85 m
crane control with panel keyboard with emerge... more
used
Electric chain hoist, crane, overhead crane, assembly crane, manual undercarriage, trolley, trolley, trolley, crane drive, crane trolley, trolley
-Electric chain hoist with landing gear
-Bearing capacity 250 Kg
-Main lift 8 m / min
Kgsizmrz
-Fine lift 2.4 m / min
-hook path 3,4 m
-Dimensions 385/500 / H800 mm
-Weight about 40 kg more
Crane system Fabr.DEMAG type: EKDE Tamil. 6, 3 t
with radio control.
Complete with steel frame and uprights using blueprints u.Kranpruefbuch
in very good condition
Span width: 3, 2 m lifting height: max. 4, 2 m high steel frame: 5, 7 m
Route length: 20m
Bo3u2ayl
The crane system is already built in the camp of Iserlohn. more
HADEF - Chain hoist
29/06 EE
480 V
1,000 kg
60 Hz
Bmywyb2tqf
used / used
Please note the photos
Please look at the pictures. Important!!!
Net weight / net weight: 190 kg
X275 more
weight max.:50 t
clamping width:3650 mm
weight of the machine ca.:4 (mit Ketten) t
2rgc8u
dimensions of the machine ca.:3,65 x 2,2 x 1,0 m more
lifting capacity: 0,5 t
lift: mm
span width: mm
height lower edge cantilever arm: 3150 mm
jib length load hook end position: 4 750 mm
cantilever arm length from center column: 5 200 mm
swival range : ca. 270 °
height lower edge cantilever arm: 3,150 m
lifting height max. hook position: 2 000 mm
column diameter: Ø 325 mm
dimensions base plate: 620 x 630 x 22 m
total power requirement: ca.3,24 kW
transport dimensions LxWxH: 5,6 x 0,76 x 4,2 m
weight: 1240 kg
Jib crane with foot flange square plat... more
1982
used
Overhead crane, overhead crane, assembly crane, workstation crane
-Electric crane
-Bearing capacity 12,500 kg
-Lift height 6,500 mm
-Wire speed 5 / 0.5 m / min
-Span 8,000 mm
-Cat and carrier trolleys 1 speed each
-Gauge 2000 center middle
-remote control
Bewfwlw23
-Dimensions 8200/2640 / H1250 mm more
Bridge crane with Balkankar 3.2 t
Crane length: 12 meters
Ein0isnbi
Manufacturer: Snina Vihorlat
Year of production: 1974
Load capacity of the crane structure: 3.2 tons
Design: two beams next to each other
Including motors for rail travel.
Crane travel speed: 40 m / min.
Rope cat travel speed: 20 m / min.
Rope cat manufacturer: BALKANKAR
Type: T 0153-3,2T
Year of production: 1986
Lifting speed: 8 m / min.
Lift height: 12 meters
Cat weight: 280 kg
Crane weight with cat: 6.5 tons more
Hetronic crane control and crane remote control
GA 610
24 V
7,5 A
Strmgg
unused / unused
Please note the photos
Please look at the pictures. Important!!!
Net weight / net weight: 7 kg
X201 more
Technical data aluminium Portal Crane, stationary type
Manufacturer Schilling Gerätebau e.K., Germany
Type 1321540
Year of construction 2017
Load capacity 1.500 kg
Beam length clear width 4,000 mm
Total beam length 4,100 mm
Suspension point on the bolt min. 1,740 mm
Suspension point on bolt max. 2,990 mm
Total height min. 2.120 mm
Total height max. 3,370 mm
Lower edge of aluminium beam min. 1,830 mm
N7ia7
Lower edge of aluminium beam max. 3,060 mm
Adjustment range of the carrier support 850 mm... more
lifting capacity: 0,25 t
lift: mm
span width: mm
height lower edge cantilever arm: 2500 mm
jib length load hook end position: 3000 mm
Mupg8o
swival range : 270 °
cantilever arm length from center column: 3 380 mm
lifting height max. hook position: ca. 2 000 mm
column diameter: 220 mm
voltage: 400 V / DS 50 Hz V/Hz
Column slewing jib crane with small foot flange
- corridor-operated pendant control
- lifting gear brand Balcancar; lifting height 6,4m; load chain; hook with safety device
- running ... more
2007
used
Pillar jib crane, hall crane, workstation crane
-Bearing capacity 1000 kg -
-with chain hoist SWF type SKB0802203FNU400517020N
-Unloading 4015 mm
-Total height 3918 mm
-Main stroke 4.0 m / min
-Fine stroke 1.0 m / min
-Transport dimensions 4325/1040 / H1470 mm
-Dead weight 1030 kg
Bgovwslyxc more
lifting capacity :0,250 t
lift:3600 mm
span width:4000 mm
Gwft8c
weight of the machine ca.:0,6 t
transport dimensions LxWxH:4,3 x 1,8 x 0,5 m more
arm length 3000 m
total column height 3,53 m
weight max. in kg 250 kg
Cpgql7oi
stroke height 2,60 m
total height over floor 3,536 mm
stroke speed 1,25 / 5,00 m/min
total power requirement 0,13 / 0,50 kW
weight of the machine ca. t
dimensions of the machine ca. 3,00 x 3,00 x 3,53 m more
2000
used
Pillar jib crane, indoor crane, workplace crane
-Delivery as is as seen
Bgs7por70v
-the column is damaged (pictures)
-1000 kg load capacity
-with Demag chain hoist
-projection 4180 mm
-total height 3600 mm
-Transport dimensions 4500/1100 / H1830 mm
-Own weight 736 kg more
Manufacturer: ABUS
Bgy3b38sge
Type: VS
Year of construction: 2006
load capacity: 1.000 kg
Projection: 3.000 mm
construction height: 3.800 mm
Height to beam bottom edge: 3,440 mm
lifting height: 3.000 mm
Weight: 1000 kg
2 pieces available !
.. more
lifting capacity: 1,0 t
Stnpgg
lift: mm
span width: mm
Arm length: 3500 mm
jib length load hook end position: 3500 mm
height lower edge cantilever arm: 3900 mm
cantilever arm length from center column: 3750 mm
lifting height max. hook position: 3200 mm
column diameter: 400 mm
total power requirement: kW
dimensions L x W x H: aufgebaut: 4,2 x 0,84 x 4,25 m
Column mounted slewing crane with a small octagonal foot flange 750 x 750 x 21mm
- Operation floor-operated Pendant station
- swivel electric... more
carrying capacity 350 kg.
number of suction cups 6 Stück
suction cup dia. 160 mm
B0xe9sbb
Sawing unit 4 m3/h
voltage 400 V
total power requirement 0,18 kW
weight of the machine ca. 90 kg.
dimensions of the machine ca. 2.200 x 1.000 x 750 mm more
weight max. 5 t
clamping width 9.400 mm
Bgxxlmuwg9
2 lifting speeds
weight of the machine ca. 4 t more
lifting capacity 2 x 5,0 t
lift -- mm
span width 23500 mm
travel of hook 6000 mm
weight of the machine ca. ca. 3,5 t
connected load frequency 400 V
control voltage 230 V
- with 2 trolleys as cantilever crab 5 to.
- Length shortened to 23.5 mtr.
- Corridor operated
- The crane has 4 wheels, as does the cat
- Roller diameter crane: 400 mm
- Roller diameter cat: 200 mm
Dowep2in
- Wheel load at least 30.6 kN max. 77.9 kN more
2007
used
Pillar jib crane, hall crane, workstation crane
-Bearing capacity 2000 kg
-with chain hoist SWF Type SKC 080.22-FNU
-Unloading 3965 mm
-Overall height 4015 mm
-Main stroke 4.0 m / min
Bgovw238ld
-Fine stroke 1.0 m / min
-Transport dimensions 4370/1050 / H1610 mm
-Dead weight 1030 kg more
Column mounted slewing crane
Manufacturer: DEMAG
Height: approx. 3 m
Outreach: approx. 3 m
Weight: 1000 kg
.
Cfns8qf8 more
lifting capacity: 1,0 t
lift: mm
span width: mm
Arm length: 3500 mm
jib length load hook end position: 3500 mm
height lower edge cantilever arm: 3900 mm
cantilever arm length from center column: 3750 mm
lifting height max. hook position: 3200 mm
column diameter: 400 mm
total power requirement: 0,76 kW
dimensions L x W x H: aufgebaut: 4,2 x 0,84 x 4,25 m
Column mounted slewing crane with small octagonal foot flange 750 x 750 x 21mm
Bhqlcqaa8e
- Operation floor-operated Pendant station
- swivel e... more
1991
used
bearing load 1,500 kg
speed of stroke 1 / 4m/min
with electric chassis
running speed 4 / 16m/min
chains 7/8 x 23 mm
complete electric and traction motors for crane bridge
existing
Meeb7 more
1966
used
weight max. 3 t
Jbngenpd
stroke 6500 mm
stroke speed 9 m/min
weight ca. 1,4 t
with travel drive (head carrier)
Two-rope
Details see pictures more
1999
used
Overhead crane, overhead crane, assembly crane, workstation crane
-Chain hoist manufacturer Demag Type DKUN 2-250 K V1 F4
-Bearing capacity 250 kg
-Height 3 m
-Main lift 8 m / min
-Feinhub 2 m / min
-Span 4525 mm
-KBK rail length load capacity 500 kg
-Height upper edge KBK rail to hook center 620 mm
Ivejssc2c
-Flurbedienung
-Transport Dimensions 4530/800 / H400 mm
-Weight 144 kg more
weight max.:50 t
Nldct
clamping width:5000 mm
weight of the machine ca.:4,5 t
dimensions of the machine ca.:5,0 x 2,2 x 1,0 m more
lifting capacity: 1,0 t
lift: mm
span width: mm
Arm length: 3500 mm
jib length load hook end position: 3500 mm
height lower edge cantilever arm: 3900 mm
Nvycf
cantilever arm length from center column: 3750 mm
lifting height max. hook position: 3200 mm
column diameter: 400 mm
total power requirement: 0,76 kW
dimensions L x W x H: aufgebaut: 4,2 x 0,84 x 4,25 m
Column mounted slewing crane with a small octagonal foot flange 750 x 750 x 21mm
- Operation floor-operated Pendant station
- swivel elec... more
2010
good condition (used)
Mobile workshop crane, counterweight small crane with battery-electric stroke
Maximum load capacity 500kg
Maximum hook height approx. 2740mm with approx. 1250mm discharge
Including plate lifting pliers for 400kg load capacity
The boom length is adjustable in 5 steps
For permanent operation and not the simple hand-hydraulic version designed by the manufacturer for approx. 500 lifting movements.
They can stand directly next to the load through the 3m cable remote control, and can thus perform ver... more
