Condition: good (used), Year of construction: 2017, Functionality: unexamined, machine/vehicle number: 5012221, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter: 430 mm, turning length: 760 mm, total length: 1,890 mm, total width: 900 mm, total height: 1,800 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, overall weight: 1,700 kg, - Turning diameter over offset: 690 mm - Bed width: 300 mm - Spindle bore: 58 mm Dolsv Iriujqw Nf Hjkl - Longitudinal feeds: 0.05 - 0.82 mm/rev - Face feeds: 0.02 - 0.4 mm/rev - Thread (metric): 0.5 - 7 mm - Lead screw diameter: 35 mm - Lead screw pitch: 6 mm - Tailstock quill diameter: 58 mm - Tailstock quill adjustment range: 150 mm - Quill taper mount: MK4

Condition: ready for operation (used), Year of construction: 1990, CNC Turning Machine Fabr.MONFORTS Type: RNC 4 Year 1990 Control FANUC 10TF-FAPT. Turning diameter max:250 mm Turning length : 1000 mm Spindle speed: 70-4000 rpm Spindle passage: 65 mm Hollow clamping device Chuck diameter 250 mm Röhm Tool turret 12 Pos.VDI 40 Djlqwovgcwae Nf Hjkl Tailstock MK 4 Complete machine documentation, chip conveyor. Complete weight approx. 7 500 kg.

Condition: excellent (used), Pull down jaws (28370) Make Hilma type BZT 160 3722-04 Dkjlqw Nfelrp N Hj Hol well suited for bright drawn material weight 3,5 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 10,600 h, Functionality: fully functional, turning length: 3,000 mm, turning diameter: 670 mm, This second hand INTEGREX model "e-420 H-S II"i s a Multi-Tasking Machining Center and a complete fusion of CNC turning center and machining center, forming one of the best and most advanced multi tasking machine in the industry. Complete all operations in a single setup – turning, milling, boring, drilling, part transfer from spindle 1 to spindle 2 and more with Mazak's Done-In-One capability. The machine delivers precision and performance for heavy, large-diameter, shaft-type workpieces within a wide range of industry applications. This machine was barely used in a company that recently filed for bankruptcy in 2024. The former owner from Poland was active in the general machining as third party contract manufacturer. The entire factory will shut down within the next few months. The company had just been purchased in 2025 by an investor who will delete the entire manufacturing operation and transform the building for new purposes. General Discription Milling spindle travel -30 ~ 210 degrees (.0001 degree min index angle) Available 2.5k 40HP 5.2” spindle Bore (option) Identical second spindle for Done-In-One part processing Full C-axis contouring (.0001 degree minimum index) Available 80 or 120 automatic tool changer options available Machine Specifications CNC control: Mazatrol Matrix 2 Distance between centers: 3000 mm Max turning diameter: 670 mm Max machined length: 3000 mm Max workpiece weight: 880 kg Max chuck speed: 2500 rpm Automatic tool changer: 40 tools Spindle motor power: 22 kW Motor power of the milling unit: 15-22 kW Milling spindle: 12000 rpm Djlqw Nfev H Rtce Hjkl Indexation: 0.0001° X/Y/Z axis travel path: 845 / 420 / 3013 mm Rapid traverse in X/Y/Z axis: 50 / 50 / 40 m/min High-pressure cooling through the center of the tool: 70 bar Operating hours: 10600 h

Condition: used, Year of construction: 1999, Technical details: turning diameter: 570 mm turning length: 3000 mm tailstock-quill conus: MK 5 spindle head: 8 nach DIN 55027 spindle bore diameter: 62 mm speeds station 1: 3 - 500 U/min speeds station 2: 15 - 2500 U/min Feed speed: längs max. 10 m / plan max 5m m/min. weight of the machine ca.: 6,4 t main drive DC: 20/30 kW : 35 kw dimensions of the machine ca.: 5,83 m x 2,10 m x 1,98 m m Main drive - Siemens speed 8000/min Feed drive X - Siemens speed 3000/min Feed drive Z - Siemens speed 3000/min Coolant pump - Brinkmann speed 2700/min Lubrication pump - Vogel speed 1370/min Coolant 47 l/min. 0.2 bar Noise level according to DIN 45635 - Part 16 80db Delowdwi Deqw Nf Hskl Coolant pump Main spindle brake Top support with Haase quick-change steel holder Setting vice fixed diameter 20 - 315 mm Moving headstock diameter 25 - 160 mm *

Condition: used, Year of construction: 2005, Functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 565 mm, turning diameter: 560 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 79 mm, feed rate Y-axis: 80 m/min, chuck outer diameter: 68 mm, overall weight: 7,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Y-AXIS LIVE TOOLS CNC HEIDENHAIN Max turning length 600 mm Max turning diameter 560 mm Max turning diameter (over the slide) 565 mm Max turning diameter (over the bed) 680 mm Number of live tools 12 pcs. Max speed of live tools 4500 rpm. Feed rate on Y axis 80 mm (+40/-40 mm) Distance between axes 635 mm Max spindle diameter 250 mm Spindle speed range 25-5000rpm. Max power of the spindle 35 kW Max torque of the spindle 370 Nm Dkslqwor I Abxj Nf Hol Max spindle diameter 68 mm Spindle bore 79 mm Machine dimensions approx. (LxWxH) 3500x2350x3500 mm Machine weight approx. 7000 kgs EQUIPPED WITH: -Chip conveyor -Y axis -Rest -Tailstock USED MACHINE

Condition: good (used), Functionality: unexamined, machine/vehicle number: 160378, turning diameter over cross slide: 180 mm, spindle bore: 40 mm, turning diameter: 375 mm, center height: 160 mm, turning length: 750 mm, total length: 2,500 mm, total width: 1,000 mm, total height: 1,500 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 38 rpm, overall weight: 2,500 kg, - Operating voltage: 380 V - Largest workpiece diameter over cheek: 375 mm - Largest workpiece diameter over cross support: 180 mm - Spindle taper: Morse 5 - Collet passage: 24 mm - Fine feeds longitudinal and transverse: 0.015 to 0.21 mm/rev - Longitudinal and transverse feeds: 0.025 to 0.35 mm/rev - Cross support path on the cheek: 750 mm - Tool slide path: 120 mm - Cross slide path: 215 mm - Center height above tool slide: 32 mm - Steel cross section: 20 x 20 mm - Tailstock quill taper: Morse 3 - Quill path: 120 mm - Lateral adjustment: +/- 10 mm Equipment: - Incl. documentation - Matching workshop cabinet including accessories Dkjlev Irh Doqw Nf Hel

Condition: good (used), Year of construction: 1980, CNC Karuselldrehmaschine Fabr.JUNGENTHAL type: JU8F BJ. 1980 Modenisiert 2005 control HEIDENHAIN Manaul plus 4110. Max.Drehdurchmesser: 930mm Circular diameter max: 1100 mm Internal breakdowns min: 300 mm Turning length max. 520 mm Dkolqw Nfednznko Hol Spindle speeds: gear-unit stage 1: 0-110 RPM Gear-unit stage 2: 110-300 RPM Power of main motor screw: 55-70KW Complete machines documentaries available.

Condition: like new (used), Year of construction: 2005, Cazeneuve CNC Lathe Model OPTIMAX 360 Year 2005 Turning length 610 mm Turning diameter 360 mm Bed diameter 360 mm Dslqw Newb Uk Hef Hokl Slide diameter 200 mm Center distance 610 mm X axis 180 mm Z axis 610 mm Spindle nose MT 6 Spindle bore 54 mm Number of turrets - 1 Number of tools - 8 VDI 20 turret Selection of turning tools 16 x 16 mm Boring bar diameter 25 mm Rotation speed 4200 rpm Spindle motor capacity 7.5 kW Dimensions: 1950 x 1320 x 1640 mm Weight 2100 kg

Condition: used, Year of construction: 2004, Mazatrol 640 MT Pro Control Type: Mazatrol 640 MT Pro Captiva C6 Swing: 851 mm Turning Diameter: 760 mm Center Distance: 1500 mm Bar Capacity: 88 mm X-Axis Movement: 630 mm Y-Axis Movement: 230 mm Z-Axis Movement: 1585 mm B-Axis Spindle Tilt: 225° CTS 15 Bar Dkelqw Newdw Hcsf Hol C-Axis Index Increment: 0.001° W-Axis Movement: 1050 mm Main Engine: 30 HP Sub Spindle Speed: 4,000 rpm Sub Spindle Motor (HP): 25/20 HP Live Tool Speed: 12,000 rpm ATC: 40 tools in magazine

Condition: used, Year of construction: 2006, Technical details: turning diameter: 145 mm turning length: 210 mm total power requirement: 40 kW swing diameter: 145 mm Spindle bore sp. 1: 56 mm Spindle bore sp. 2: 56 mm swing diameter over face slide: 145 mm greates pass round over bed: 145 mm RPM Main Spindle: 7.000 1/min number of workpiece supports: 12 Shank diameter: 25 mm C-axis RPM: 2.000 1/min Chuck diameter spindle 1: 140 mm Chuck diameter Spindle 2: 140 mm Number of tools: 12 fach St. Tool bore: VDI 25 Shank diameter: 25 mm weight of the machine ca.: 5.300 kg dimensions of the machine ca.: 5.000 x 4.100 x 2.050 mm Slide path flat: X1, X2, X3: 220mm, 120mm ( 145mm ) Longitudinal slide travel: Z1, Z2, Z3: 320mm, 345mm, 380mm Vertical slide travel Y1: +/- 30mm Longitudinal spindle travel Z3: 380mm Clamping tube inner draw tube 46mm diameter Speed range main drive 1+2 up to 7,000 rpm Speed of driven tools up to 6,000 rpm Main and counter spindle collet chuck 1 axial driven tool 1 radial tool Belt filter system Loading magazine FMB Turbo 10-72 XT * Djlqw Newdv U Sef Hokl

Condition: good (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 021902SA04, overall weight: 1,350 kg, Equipment: documentation/manual, The highly flexible Master 80 HF allows changeover in just 1 minute for round and polygonal profiles from 15 to 80 mm in diameter. Thanks to its innovative structure, the MASTER 80 HF can process bars from 15 to 80 mm in diameter in a single channel. The material support adjustment is automatic. The use of the front centering device allows optimal use of the loading magazine with any type of bar material, both hexagonal and square. The material pusher, which is heavier and more stable than the previous version, is radially clamped and locked by pairs of rollers. This, along with additional stabilization of the loading magazine, ensures the processing of bars from 15 to 80 mm in diameter. High Rigidity The thorough research and structural design of the Master resulted in a product with extreme torsional and longitudinal rigidity, eliminating any vibration. Front Bushing Dkoljwdwt Aeqw Nf Hjl The front guide bushing also guides the bar between the loading magazine and the lathe, eliminating any vibration. Replacing the two half bushings takes less than 30 seconds. Axial Shifting Device The loading magazine features an axial shifting device that allows easy access to the lathe.

Condition: good (used), Functionality: unexamined, machine/vehicle number: 10279, turning diameter over cross slide: 200 mm, spindle bore: 35 mm, turning diameter: 300 mm, center height: 150 mm, turning length: 750 mm, total length: 1,860 mm, total width: 700 mm, total height: 1,800 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 40 rpm, overall weight: 1,030 kg, - Operating voltage: 380 V - Connected load: 3 kW - Nominal current: 25 A - Frequency: 50 Hz Equipment: - Tailstock - Multifix type B tool holder Dslqw Nfov Irgto Hjkl - Three-jaw chuck (diameter: 160 mm) - 2-axis digital display from the manufacturer RSF

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev rapid traverse : 1800 mm/min Further data see data sheet Dkelqw Nfevi Hryj Hjl Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: reconditioned (used), Year of construction: 1995, Functionality: fully functional, turning diameter over cross slide: 650 mm, spindle bore: 95 mm, turning diameter: 930 mm, turning diameter over bed slide: 930 mm, turning diameter over top slide: 650 mm, turning length: 3,000 mm, total length: 5,500 mm, total width: 1,500 mm, total height: 1,500 mm, overall weight: 10,500 kg, workpiece weight (max.): 6,000 kg, spindle mount: MK 6, Used universal lathe PORĘBA TRP-93/3M, year of manufacture 1995, has been inspected and externally overhauled by us. The delivery includes a steady rest with a diameter of 450 mm and a 4-jaw lathe chuck with a diameter of 800 mm. Availability: the machine is available immediately, under power, technical inspection at any time Technical data: Dkjlqowdv Rmsw Nf Hsl - Distance between centers/turning length: 3000 mm - Turning diameter over bed: 930 mm - Turning diameter over support: 650 mm - Turning diameter in the bridge recess: 1150 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6000 kg - Maximum workpiece weight between centers + 1 steady rest: 7600 kg - Maximum workpiece weight between centers + 2 steady rests: 9200 kg - Number of spindle speeds: 21 - Speed ​​range (rpm): 5 - 800 - Motor power [kW]: 17/27 (gear 1/gear 2) - Overall dimensions: - Total length: 5500 mm - Width: 1500 mm - Height: 1500 mm - Total weight: 10,500 kg Additional equipment included in the scope of delivery: - 1 x steady rest with a diameter of 450 mm - 1 x 4-jaw chuck with a diameter of 800 mm.

Condition: used, Year of construction: 2007, Technical Specifications: Mazatrol Matrix Djlqw Newdwvwof Hokl X-Axis Movement: 630 mm Y-Axis Movement: 230 mm Z-Axis Movement: 1610 mm Max Turning Length: 1496 mm Max Turning Diameter: 660 mm Spindle Speed: 3000 rpm Number of Tools: 40 pcs, Revolver 9 pcs. Type of Tool Holder: Capto C6 Engine Power: 25 - 30 kW Conveyor: ConSep 2000-II 70 bar pump for coolant. Robot interface Renishaw MP-10 Dimensions: Length: 5100 mm Width: 2900 mm Height: 2798 mm

Condition: good (used), Year of construction: 2008, Description: Takisawa Manufacturer: Takisawa Type: EX-310 Turning length approx. 500 mm. Rotation diameter: approx. 260 mm. Equipment: Control: Fanuc 21i-TB Bar loader for bar length 1.5 m Tailstock Turret with 12 tool stations and driven tools. Three-jaw chuck Ø 250 mm. Dkslqwstrd Srs Nf Hol

Condition: good (used), Year of construction: 1987, Functionality: unexamined, machine/vehicle number: 61699, turning diameter over cross slide: 160 mm, spindle bore: 28 mm, turning diameter: 260 mm, center height: 140 mm, turning length: 500 mm, total length: 1,600 mm, total width: 1,000 mm, total height: 1,900 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 71 rpm, overall weight: 800 kg, - Operating voltage: 380 V - Frequency: 50 Hz - Connected load: 3 kW - Nominal current: 25 A Equipment: - Tailstock Dkslqw Nfev Iq Uis Hol - Multifix Type A tool holder - Steady rest - Four-jaw chuck (diameter: 120 mm)

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 Dkelqw Nsvbb U Hof Hol with Fanuc OT control . Bar capacity max: 16 mm. Further data see data sheets Machine documentation available .

Condition: used, Year of construction: 2007, Max. turning Ø: 660mm X-Axis: 580mm Y-axis: 160mm Z-Axis: 1545mm B-Axis: 270° Spindle bore: 65mm Subspindle bore: 65mm Subspindle power: 18.5kW Speed range: 5000Rpm Spindle power: 22kW ATC 40pcs Revolver 9pcs B-Axis Tool System: Capto C6 B-Axis Speed Range: 12000Rpm Length: 5200mm Dkjlqswdwm Nsw Nf Hsl Width: 2550mm Height: 2600mm

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Description Control system: Fanuc 21i-T Circulation diameter (max.): 260 mm Chuck diameter (max.): 250 mm Motor spindle speed: 4,500 rpm Clamping cylinder: Full clamping cylinder Tool carrier: 12-position disk turret without lifetool Dkslqwotq Tnuj Nf Hol Tool holder: VDI 40 Workpiece feed: Workpiece circulation belt with drag frame. Chip conveyor: Hinged belt conveyor.

Condition: good (used), Functionality: unexamined, turning diameter over cross slide: 178 mm, spindle bore: 35 mm, turning diameter: 280 mm, center height: 145 mm, turning length: 750 mm, total length: 1,700 mm, total width: 800 mm, total height: 1,800 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 70 rpm, overall weight: 800 kg, - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 11 A Djlqw Nov Iqr Ujf Hekl - Spindle nose: D 1-3 - Morse taper in head sleeve: 3 - Lead screw diameter: 25 mm - Thread: 6 mm pitch

Condition: good (used), Year of construction: 1998, Emag VSC 200 with workpiece conveyor and chip conveyor. The main spindle bearings were replaced in 2005. Control: Siemens 840D Turning diameter: Ø 260 mm. Dkjlqwjtq Ifnj Nf Hel Turning length: approx. 200 mm. Machine dimensions: Length: 3,200 mm, width: 1,800 mm, height: approx. 2,650 mm. Machine weight: approx. 6,500 kg. The machine was only used in 1-2 shift operation.

Condition: used, Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, We offer 4 pieces Emag VL 3 for sale. Dsljtrdlaeqw Nf Hekl Three machines with Lifetool. One machine without Lifetool. Year of construction of the machines 2000-2001 General description: Manufacturer: Emag Machine type: VL3 Technical data: Control: Fanuc 21i-T and Fanuc 18i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t A used three-jaw chuck is included with every machine. The description is non-binding and should be checked during an inspection.

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, input voltage: 400 V, year of last overhaul: 2023, ATTENTION: THIS MACHINE AT A ONE-TIME SPECIAL PRICE. General description: Year of construction: 2001/2023 Manufacturer: Emag Machine type: VL3 Technical Data: Control: Fanuc 21i-T Rotation diameter: approx. 210 mm Maximum speed 6,500 1/min Turret: VDI 40 mm, 12 stations The machine does not have a life tool. Hinged belt chip conveyor Spindle holder: GR. 5 Circulating parts conveyor. Machine weight: approx. 5.5 t The following work was carried out during this overhaul in 2023: -Machine was completely dismantled, cleaned and repainted, The main spindle was re-supported -The guides and guide shoes were replaced in the X-axis and Z-axis -The ball screw in the X-axis and Z-axis was replaced -New unit for central lubrication and new hoses -Hydraulic unit was checked and serviced. Drive coupling between motor and pump was replaced -Cooling unit was checked and serviced: Temperature difference controller was replaced - Clamping cylinder was re-mounted and sealed. Gearbox of the A-axis was re-mounted and coupling between motor and gearbox was replaced -Electrical cabinet was cleaned -Control panel was replaced -New screen -New interior lighting -Turret was dismantled, wearing parts checked, cleaned and resealed -Cleaned turret encoder and encoder wheel -Length measuring systems in X-axis and Z-axis disassembled and cleaned -Pick-up station springs replaced -X-axis and Z-axis motors were checked for bearing damage -The windows on the work door were replaced. -The chip conveyor was completely dismantled, re-stored, cleaned and painted -Of course, various small parts of the machine were also replaced The product has been described by us with the utmost care. The description is non-binding and should be checked during an inspection. Dkolqw Nfstpu Sze Hjl