Used tool milling machines - univ.conv. 0-399mm X-axis travel for sale (115)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min Nodpfsu Tuk Hox Ahvjkw - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: used, Year of construction: 1976, x-travel 350 mm y-travel 150 mm Nedpjwwwr Esfx Ahvskw z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 1989, x-travel 350 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 280 mm spindle taper SK 40 150 - 1660 U/min feeds 25 - 285 mm/min rapid traverse 1 m/min quill stroke 80 mm milling-head swivable +/- 45 ° Nksdpsvzhidjfx Ahvew total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of machine L x W x H 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant

Condition: used, Year of construction: 1978, x-travel 300 mm y-travel 160 mm z-travel 340 mm table surface area 600 x 210 mm Nksdpfxswl N R Ns Ahvsw spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, counter bearing, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, Year of construction: 1973, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 215 mm Njdotqqn Repfx Ahvjkw spindle taper SK 40 spindle turning speed range 50 - 2500 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 1,8 kW weight of the machine ca. 860 kg dimensions of machine L x W x H 1,06 x 1,05 x 1,33 m Accessories: vertical head with quill retraction, solid table, counter bearing, coolant

Condition: used, Year of construction: 1999, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 50 - 2600 U/min feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 5,5 kW Nkjdpfx Ahjwngkrsvow weight of the machine ca. 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, table length: 790 mm, table width: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Nodpfx Ajwffymjhvokw Transverse travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Condition: good (used), 1 x Universal milling machine Macmon M 100 in very nice condition from vocational school. Nsdpjt Sdaijfx Ahvjkw Technical data and more photos will follow. The machine can be inspected under power.

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – Electric 3-Deck Oven ✅ Model: Compac (3-deck, 2 x trays per deck) ✅ Serial No: 3669 ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: 1979 (possibly - date code is 3.2.6.79.) Nkjdsw Rn Euepfx Ahvsw 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Electric 4-Deck Oven ✅ Model Ref: CP MK4 4-8-8 (4 x decks, 8 x trays per deck) ✅ Serial No: 8293 ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Serial No: KM 765 ✅ Manufacturer: Newsmith Stainless Ltd. ✅ Stainless steel construction. ✅ Front-loading with internal rack system for bread pans or trays. ✅ CE marked 🗒️Notes: Requires detergents approved by Newsmith Stainless Ltd to maintain warranty ❗Important: These machines are in the Republic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: ready for operation (used), Cover FP 1 Milling machine Traverse path X-axis: 300mm Y-axis travel: 160mm Z-axis travel: 340mm Mounting: SK 40 with tightening thread Feed X-axis: 290mm Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) Nksdpfx Ahouvih Hjvjw You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: reconditioned (used), Universal tool milling machine cover FP1: Technical data: -Working range X: approx. 300 mm -working range Y: approx. 150 mm -Working range Z: approx. 340 mm -swiveling angular table -Clamping surface: 260x600mm -T-slots: 5 -T-slot width: 12 mm -Spindle speeds:: 20 - 2000 rpm -speed range - vertical: 60 - 1200 rpm -speed range - horizontal: 95 - 1900 rpm -Speed steps working spindle: 12 -feed range: 10 - 500 mm/min -feed steps: 10 -spindle mounting: MK 4 -Pinhole stroke vertical: 60 mm -Total power requirement: 1.7 kW -machine weight approx.: 0.8 t -space requirement approx.: 0.9 x 1.05 x 1.55 m Scope of overhaul: -Complete renewal of the electronics (from a professional with circuit diagram!) -Cleaning -polishing of all blanks Nksdpjhv H Spsfx Ahvew -New paint -exchange of various signs -Replacement of all standard parts (screws, handles, levers, hand wheels, oil sight glasses etc.) -bearing and sealing of the upper gear shaft -sealing of the coolant pump -Conversion of the feed axles to safety handwheels -reinstallation of the coolant lines -adjustment of the V-guides and axle clamps On request, the machine can be equipped with glass scales in all axes. The machine can be inspected and tested by appointment. The machine transport and various accessories we offer you with pleasure.

Condition: good (used), Stock no.: 3010 Manufacturer: Deckel Machine number: 31488 Type / Model: FP 1 Travel paths x-y-z: 300 - 150 - 340 mm Table: 600 x 200 mm Speed range: 40 to 2,000 rpm Spindle taper: MK 40 Feeds: 16 to 500 mm/min Power supply: 1 / 1.5 kW Accessories/Equipment: Elesta digital readout Nedpfxow D N The Ahvskw Condition: good Weight: 0.8 t Dimensions: 800 x 1,000 x 1,800 mm

Condition: good (used), Deckel FP1 milling machine, made in Germany by Friedrich Deckel AG, Munich. The machine is operational and in working condition. For more information, please contact us. Nodpfxow Amaio Ahvokw

Year of construction: 1992, condition: new, New driver ISO40 for milling machines FN 20/32/40 Nkjdpfx Ajk Nk I Nehvsw

Condition: used, x-travel 700 mm y-travel 250 mm z-travel 300 mm table-size 1000 x 230 mm spindle taper ISO 40 spindle turning speed range 35- 1500 U/min total power requirement 3,0 kW weight of the machine ca. 1,4 t dimensions 1,55 x 1,4 x 1,65 m Universal Milling Machine - Huron Head - Mounting Fixture for Huron Head - Horizontal Counterholder - Documentation - Coolant System - Machine Feet Nedpfx Ahsv T Nqyevjkw