Used High Speed Milling Machine for sale (100,232)

Condition: used, CB Ferrari B17 High Speed 5 Axis Milling Machine with 750mm Diameter C Axis Table, 22,000rpm Electro Spindle, CAT40 Spindle Taper, Machine Weight 78000kg. S/No. 98045. CE Mark Please Note: Dismantling and Loading will be carried out by our own supplier. A charge of €850 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item., alternatively, please notify Cottrill & Co if you would like to arrange your own dismantling and loading at a cost to yourselves. Godpfxjx Trids Agbett

Condition: used, Year of construction: 2007, x-travel 550 mm y-travel 400 mm z-travel 400 mm Control INGERSOLL ANDRONIC Gjdpfxjxiy A Us Agbjtt

Condition: used, Year of construction: 1998, functionality: fully functional, SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P Gjdpfjx Rdhtox Agbott - Volt. 380/50 - CE rules - Year 1998

Condition: used, HASEGAWA PM 250 is a CNC‑High speed milling machine for precision machining with high accuracy and reliability. Capacities: table 300×260 mm; travels X100 Y225 Z200 mm; table load 80 kg; spindle‑to‑table 140–340 mm. Specs: 100–30000 t/min; spindle nose SK32; rapid traverse 30 m/min; spindle motor 3.0/4.5 kW; 3x400 V 50 Hz; 12 kVA; weight ~2000 kg; dims 1750×600×1800 mm. Accessories: Renishaw probe, set of toolholders, coolant 120 l, oil mist extractor Mebaron, tool break control, status light. Delivers tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Gtedpfx Aexx U Ecsgbjt

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M Gedoquhbgjpfx Agbett serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 2,257 h, functionality: fully functional, machine/vehicle number: SN7682, travel distance X-axis: 730 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 585 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 2,370 mm, total width: 2,845 mm, overall weight: 8,000 kg, spindle speed (max.): 42,000 rpm, operating hours of spindle: 2,256 h, number of spindles: 1, number of slots in tool magazine: 90, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, MP7-5 Axis Heidenhain TNC640 with integrated pallet changer, 40 pallet stations Travel range X/Y/Z: 730x250x400 mm B-axis travel range: +/- 105 degrees C-axis: infinite Working area X/Y/Z: 585x250x400 mm Maximum workpiece weight: 60 kg Distance machine table to spindle nose: 450 mm Machine dimensions (WxDxH): 2845x2370x3000 mm Machine weight: 8,000 kg Equipment: Cooling unit Rotary tilting table 160 (B/C axis) Workpiece measurement Renishaw OMP400 Dust extraction L-CUT 5-axis table chuck EROWA PowerChuck Godpfsw U D Igsx Agbjtt Pallet changer ITS50/150 pallets Tool changer with 90 positions MHT media distributor Control unit Heidenhain TNC640 Milling spindle Steptec HVC140 Spindle speed: 42,000 rpm HSK40

Condition: refurbished (used), Year of construction: 2007, operating hours: 11,200 h, machine/vehicle number: D300-373, travel distance X-axis: 550 mm, travel distance Y-axis: 340 mm, travel distance Z-axis: 350 mm, table width: 470 mm, table length: 400 mm, type of input current: three-phase, Equipment: documentation/manual, HSC300/3 (low hours) Complete overhaul of the entire system Technical data: Travel range XxYxZ 550x340x350 mm Clamping table/table to spindle nose 495 mm Overall dimensions WxDxH 2000x2350x2450 mm Rapid traverse 30 m/min Equipment: Color: light grey, partial respray in visible area CNC control Heidenhain iTNC530i electronic handwheel Direct measuring systems in all axes Milling spindle HVC140, milling power 10KW/13KW, HSK 40-E Spindle speed up to 42,000 rpm Tool diameters 0.02–16 mm Tool magazine for 40 tools HSC40-E Calibration arbor Calibration Blum laser for tool measurement Minimum quantity lubrication External cooling unit H.I.B Provision for dust extraction Dust extraction system Vario1 by Keller Transport On-site commissioning Gsdper Hb Hpsfx Agbett Training at our premises/on site 6 months warranty

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal Gtsdpfxswz Ukyj Agbet

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Type: Two chucks Gjdpjwz Ufwsfx Agbstt

Condition: used, Year of construction: 1995, Year: 1995 Controller: Fanuc 0M TECHNICAL DATA X-axis travel: 550 mm Y-axis travel: 300 mm Z-axis travel: 280 mm Table size: 950 x 370 mm Spindle speed: 20 - 10,500 rpm Spindle: SK40 Tool magazine: 12 positions Gtodpfx Aox Syb Sjgbot GENERAL Service book: Yes Working hours: Control language: German Spindle power: 5.5 kW Dimensions: 3 m x 2.4 m x 2.5 m Weight: 3,000 kg OTHER Payment and delivery: On request Additional information: Chip conveyor

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, used HSC machine RXP800DS - overhauled - Workspace: - X axis: 200 mm - Y-axis: 294 mm - Z axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feeds 0 - 40,000 mm / min in all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1 chuck - Emusion cooling with Oil-mist-suction - RMS Main Job manager - Spindle max. 60,000 rpm HSK 25 - Tool changer: 24 chain changer, able to operate while machining - High precision option - Remote maintenance via Teamviewer - Transport dimensions machine: W 2,425 x L 1,925 x H 2,700 mm - Weight: approx.3,000 kg Gtsdpslzhhkefx Agbjt The machine is completely checked, measured and overhauled in-house. Please arrange a viewing appointment with us.

Condition: used, Year of construction: 2007, Mecof Prima 3 Axis High-Speed Milling Centre with Rotary Head. Serial No. 30708 (2007) with Heidenhain iTNC-530 CNC Control, Travel X/Y/Z = 1650/1900/850mm, Table Size 1800 x 1500mm, 40 Tool ATC, Max Spindle Speed 30,000rpm, Spindle Taper HSK 62E, Feed Rate Max 100,000mm/min, Spindle Power 22kw, Renishaw Tool Setting. CE Mark Gtodjx Tqurjpfx Agbjt Please Note: Dismantling and Loading will be carried out by our own supplier. A charge of €11,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item, alternatively, please notify Cottrill & Co if you would like to arrange your own dismantling and loading at a cost to yourselves.

Condition: used, Year of construction: 2014, operating hours: 9,782 h, Working Area - Drilling - Drilling capacity, full drilling (steel): 45 mm Drilling capacity, full drilling (cast iron): 55 mm Horizontal travel: 1050 mm Vertical travel: 450 mm Quill stroke: 200 mm Working Spindle / Head Speed range from: 15 rpm Speed range up to: 2800 rpm Number of gear stages: 2 Spindle taper: MK 4 Maximum torque: 250 Nm Max. distance spindle ... to clamping surface: 710 mm Table Clamping surface (left-right): 1200 mm Clamping surface (front-back): 750 mm Electrical Connection Data Total power consumption: 7 kW Connected load: 9.3 kVA Connection voltage: 380 V Mains frequency: 50 Hz Gtjdpfxsx R Sirs Agbet Dimensions / Weights Space requirement, length: 3000 mm Space requirement, width: 3000 mm Overall height: 3220 mm Total weight, approx.: 2960 kg Condition Description The machine has seen very little use and is in very good condition. Only 97 operating hours!!!!

Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 40mm in steel Thread cutting device Coolant system Gtjdpfx Aex N If Hsgbot Documentation

Condition: used, Year of construction: 2017, x-travel 550 mm y-travel 400 mm Gsdpoxzk N Aofx Agbett z-travel 400 mm weight of the machine ca. 9000 kg

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Gtodpox Hnz Nofx Agbot Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: good (used), DECKEL High-Speed Milling Head No. 2021-2230 / FP 4 - 0199 This high-speed milling head is suitable for a DECKEL FP 1 / 2 / 3 / 4. When used on an FP 1, an intermediate plate is required. Spindle mount SK 40 Spindle speed range 40 - 2000 + 125 - 6300 rpm. Quill adjustment Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Godpfx Agjwg Rybsbott

Condition: used, Year of construction: 2007, Mecof Air One 3 Axis 165 High-Speed Milling Centre With Rotary Head. Serial No. 40719 (2007) with Fidia C10 CNC Control, Travel X/Y/Z = 1650/2300/1000mm, Table Size 2500 x 1750mm, 40 Tool ATC, Max Spindle Speed 30,000rpm, Spindle Taper HSK 63E, 40 Tool ATC, Feed Rate Max 60,000mm/min, Spindle Power 22kw, Blum Tool Setting. CE Mark A charge of €11,500 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item, alternatively, please notify Cottrill & Co if you would like to arrange your own dismantling and loading at a cost to yourselves. Gtjdex Tqqgspfx Agbet

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A voltage 24 V weight of the machine ca. 3,5 t Godpfxewg Huno Agbstt

Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 40mm in steel Thread cutting device Coolant system Documentation Gtodpfxsx N Ifto Agbst

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Gtsdpowifd Hsfx Agbet Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: new, Year of construction: 2025, NEW machine, end-of-series Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Gsdpexmhflofx Agbott Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 10,000 kg, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 120 mm, feed length Y-axis: 200 mm, feed length Z-axis: 170 mm, GB-A1500 Fully automatic high-speed bending center Gtsdpfx Agov Ikvgobet Bending length (mm): 1500 Bending height (mm): 4side160 4side170/2side350 4side350 Minimum molding size: (Fold 4 sides) (mm) 4 sides 160: 350*250 4 sides 170/2 sides 350: 350*250 4 sides 350: 350*250 Maximum bending size (mm) 1500*1500 X-axis travel: 120 Y axis travel: 4 sides 160: 200 4 sides 170/2 sides 350 305 4 sides 350: 305 Z-axis travel: 4 sides 160: 170 4 sides 170/2 sides 350: 357 4 sides 350: 357 Pressing knife height: 4 sides 160: 177 4 sides 170/2 sides 350: 177 4 sides 350: 357 Number of axes: suction cup: 11 Pressure arm: 14 Machine power (KW) suction cup: 34.7 Pressure arm: 36.35 Maximum bending thickness of aluminum plate (mm): 3 Maximum bending thickness of iron plate (mm): 2 Maximum bending thickness of stainless steel (mm): 1.5 Maximum bending speed (s/knife) : 0.2 Overall dimensions (mm) long (front) 4 sides 160: 1890 2-4 sides 350 suction cups: 1890 2-4 sides 350 pressure arm: 1890 Width (side) 4 sides 160： 3300 2-4 sides 350 suction cups：3536 2-4 sides 350 pressure arm: 4127 4 sides 160: 2666 2-4 sides 350 suction cups: 2946 2-4 sides 350 pressure arm: 2946 Weight (approx. kg) 4 sides: 160 2-4 sides 350 suction cups: 10000 2-4 sides 350 pressure arm: 10000 1) Machine frame is heaviest welded con struction,stess released by annealing process,this has minimized deflection of the frame. 2) Y Axis full closed loop control 3) Proportional hydraulic compensation system to prevent deformation 4) German HEIDENHAIN linear encoder 5) Taiwan HIWIN ball screw and linear guide rail ,high performance AC Japanese Yaskawa AC servo motors and drives 6) Rich functions CYBELEC/DELEM professional control system 7) Electro-hydraulic servo synchronization module and Greman BOSCH pressure module 8) +/-0.01mm repeat accuracies 9) +/-0.01mm parallelism accuracies

Condition: used, Henninger high-speed milling spindle SK40 Type 801 M391 For Deckel milling machines Ratio: 1:6 Gtsdpfx Asvygxnjgbst Max. speed: 12,000 rpm Continuous speed: 10,000 rpm Temperature: approx. 60°C with tools over: ø 12 mm With 14 collets Clamping range 2 - 15 mm

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Gtjdpeikvcasfx Agbot Drive 6kw