Used Cam Milling Machine for sale (89,681)

Condition: good (used), Year of construction: 2016, BG Cam 1325 ATC, Year of manufacture 2016, Iajlheuhzyqecdw Eew Siemens 808 D control system, Travel X/Y/Z 1270/2540/150 mm, High pressure vacuum table, Table with 4 zones, Yaskawa servo motor drive, rapid traverse X/Y 35 m/min, rapid traverse Z 15 m/min, Resolution 0.001 mm, repeat accuracy 0.01 mm, Spindle speed up to 24,000 rpm, new spindle 2024, ER 25, 6-station tool changer, linear guides, tool length measurement, vacuum pump, suction foot,

Condition: used, Year of construction: 2014, X-travel: 1250mm, y-travel: 1280mm, z-travel: 150mm, max. feed rate: 15m/min, repeat accuracy: 0.01mm, spindle rotational speed: 0-24,000/min, software: VCarve Pro, data formats: HPGL-3D / G-Code, spindle power: 6.5kW, controls: Siemens Sinumerik 808D Milling, weight: 1.2t, with collet spindle, Phenol vacuum high-pressure table, 850W servo motors Yaskawa, steel base, precision ball screws in all axes, x-axis with dual drive, linear guides, protective cover for all drive axes, suction foot for chip extraction, automatic spray cooling and material sensor. Ielhcswqd Rhsdw Ejaw

Condition: used, Year of construction: 1995, CAMAM GC6/6F-2L rotary milling machine Number of milling units 6, grinding units 2 Maximum width of material 250mm The maximum height of the material 150mm Iajlhcdjur Htlew Esw Maximum length of material 1200mm Feed speed adjustable 0-17m/min Machine in the cabin

Year of construction: 2020, Condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet Iaslhcehwd Dnsdw Esw

Condition: excellent (used), Year of construction: 2018, CNC control: Fanuc Series Oi-MF New machine, only 150 spindle hours - Flat guideways - Gearbox - Internal cooling - Various tool holders and 1 vise Travel paths X-travel 850 mm Y-travel 530 mm Z-travel 530 mm Spindle nose (to table surface) 100-630 mm Spindle axis to column surface 590 mm Iaslhcowa Ip Hsdw Esw Table Table size 530 x 950 mm Maximum table load 800 kg T-slots (W x NO. x P) 18 x (5) x 100 mm Spindle Spindle speed 8000 rpm Spindle mount BT-40 Spindle power 7.5/11 kW Feed rate Rapid positioning speed 20 / 20 / 20 m/min. Cutting feed rate: 1 – 10,000 m/min. Automatic tool changer Number of tools: 24 Tool taper: BT-40 MAS Tool holder bolt: P-40T (45°) Max. tool diameter: Ø 80 mm Max. tool diameter (no adjacent tool): Ø 150 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool to tool): 2.5 sec Tool change time (chip to chip): 6 sec Machine dimensions: Floor area: 2450 x 2700 mm Machine weight: 6000 kg Max. machine height: 2900 mm Air supply connection: 7 kg/cm2

Condition: used, Year of construction: 1997, operating hours: 60,000 h, Functionality: fully functional, machine/vehicle number: 76, workpiece weight (max.): 20 kg, power: 70 kW (95.17 HP), total length: 6,000 mm, total height: 2,300 mm, air pressure: 6 bar, nominal voltage: 400 V, suction capacity: 12,000 m³/h, total depth: 3,500 mm, 1) Camam machine 1997y - 2x inside x 2x outside moulder (11kW motor) - 2x inside x 2x outside paper sanding (5kW motor) total power 74 kW 2) Camam machine 2002y - 2x inside x 2x outside moulder (11kW motor) - 1x inside x 1x outside paper sanding (5kW motor) total power 60kW Machine suitable for bended elements (ex backrests), narrow longitudinal elements (legs), pieces height 120 mm, depth 65mm, rotation speed 8m/min Iaelhcdjv Unhgsw Eow

Year of construction: 2005, Condition: ready for operation (used), Table dimensions: 4000x2000mm, connected load: 11kW. Iaelhcsfdr Iisdw Eow

Year of construction: 2020, Condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece Islehwd Eajhcdw Eoaw - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is reviewed and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, ACTIVE TABLE SURFACE L x W = 6100x 2200 mm - DISTANCE BETWEEN COLUMNS = 2550 mm - DISTANCE BETWEEN CROSS-RAiL AND TABLE =1650 mm - RAM VERTICAL TRAVEL (Z axis) = 1000 mm - MILLING HEAD TRAVEL ON CROSS- RAIL (Y axis) a) WORKING TRAVEL =2200mm b) TOTAL TRAVEL = cca 4200mm - GANTRY PORTAL TRAVEL (X axis) = 8000 mm Ijlhcdwsuihtto Eoaw - MILLING PORT-TOOL = 150 50 - ACCESSORiES: a) UNIVERSAL HEAD. b) MILLING EXTENSION. - WEIGHT = cca 60 tons

Condition: used, Year of construction: 2006, Functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Main bearing diameter, min. / max.: 30 / 88 mm Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Deep rolling machines Iolhswm Elfscdw Eoaw Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Leveling rolling speed: 30 min¯¹ Machine Weight including auxiliary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Condition: used, Year of construction: 1991, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 610 mm, nominal power (apparent): 7,500 kVA, table width: 450 mm, table length: 1,830 mm, rotational speed (max.): 1,800 rpm, Sajo BF 400 DM Milling Machine X 1200 MM Y 700 MM Z 600 MM TWO SPINDLES Iaslev E Dzkohcdw Esw TILTING SPINDLE HEAD 1 800 RPM

Condition: used, Functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, total height: 3,250 mm, total length: 4,000 mm, total width: 3,700 mm, table width: 1,000 mm, table height: 820 mm, table length: 1,800 mm, spindle speed (max.): 1,320 rpm, spindle motor power: 7,500 W, spindle mount: MK 5, Milling machine adapted to CNC. Used and in working order. Iaelhsv Ewm Hscdw Ejw

Condition: used, Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 19090103008, Equipped with a milling spindle for 3 axes. Additionally fitted with an oscillating tangential knife, extended to a fourth axis (rotary axis). Furthermore, two more tools are installed for performing 45° miter cuts on the X and Y axes. Ideal for applications such as acoustic materials, foam, PU foam boards, cardboard, etc. Maximum blade length up to 120mm, shank diameter 6mm. Dimensions: Ijlhcdewx E Tgsw Eoaw 2200x3040mm Processing area for the oscillating knife: Y direction: 3100mm X direction: 2100mm Processing area for the spindle approx.: Y direction: 3000mm X direction: 2000mm Clearance: 200mm Vacuum table size: 2020x3040mm The machine is equipped with a 6-zone vacuum table and has a water-cooled pump with a power rating of 3.6kW. Total weight is approximately 1.85t. Rack and pinion drive. Oil lubrication system. Stepper motors, step by step. Maximum spindle speed 24,000 rpm – high-frequency, water-cooled. Dust extraction connection. Scope of delivery includes the complete workstation with German CAD/CAM software, including PC, monitor, and keyboard, all ready for immediate use. Various tools and spare parts are also included. The machine has been used by us since 01/2020 for processing acoustic material and has been regularly maintained. Price: €14,500.00 excl. VAT, without delivery and installation. The machine is disassembled and ready for collection.

Condition: new, Functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Iajlhcjwtnxnsdw Esw Clipboard

Condition: ready for operation (used), Year of construction: 2007, XYZ EMX EMILL 2000 CNC Turret Milling Machine Proto TRAK EMX 2 -axis control Table 1,270 x 254mm Table travel 750 x 380mm Quill travel 127mm Spindle taper R8 Spindle speeds 60-4,200rpm Spindle drive motor 2.2 kW Coolant 415 3 Phase Electrics Swarf tray Manufactured 2007 *For sale with Jet Machinery Ltd* Jet Machinery Stock Number: 78936 Machine Serial Number: 711072 £7,950.00 + VAT Iaelhcowngbdodw Eew Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Functionality: fully functional, feed length X-axis: 2,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 1,000 mm, SIX-AXIS CNC DEEP-HOLE DRILLING MACHINE TOOL System:FANUC0i -MF Diameter of the Hole for Gundrill:Φ 4~Φ 35mm Diameter of the Hole for Ejector:Φ 18~Φ 65mm Maximum Depthof the Hole for Gun Drill:1300+500mm MaximumDepth of the Hole for ejector:1000mm Ielhcjuip Avodw Eoaw Processing Range(from Left to Right )of (X):2000mm Processing Rangeof Sliding Table (Y):1500mm Processing Range of column (Z):1000mm The Rotary Angle of Ram (A):The Spindle Turns upward 20 degrees ,and down to 30 degrees Fast Feed(S.Y.W.Z):10m/min Maximum speed of working table:2r/min Maximum speed of Ram:200°/min

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10 500 mm Uitgebreid armbereik van de robot (links en rechts): 3045 mm maximale werkstuklengte als het een profiel is: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10 500 x 3045 mm max. werkstukhoogte: 3500 mm Gereedschapswisselaar met 13 posities: - 12 aangedreven gereedschappen - 1 meetsonde Freeskop: Iaeljv Sfk Hjhcdw Esw -SK40 - 12 kW op spindel / 16 000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit aanpassen naar één werkgebied (voor een groot werkstuk) of opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: ready for operation (used), Year of construction: 2002, XYZ SM3500 3 Axis CNC Bed Milling Machine ProtoTRAK SM Control 5HP – Programmable Spindle Spinde Speeds 40 – 5000rpm Spindle Taper ISO40 Ijlhcdjwnf T Eow Esaw Table Size 1370 x 355mm Max. Table load 600kgs X Axis Travel 787mm Y Axis Travel 508mm Head Vertical (Z) 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar *For sale with Jet Machinery Ltd* Jet Machinery Stock Number: 78924 Machine Serial Number: 9507 £12,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2014, XYZ SMX 4000 3-Axis CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2014 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 78806 Serial No: 12168 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Iaolet R R Abohcdw Eow

Condition: ready for operation (used), Year of construction: 2007, operating hours: 7,921 h, Functionality: fully functional, machine/vehicle number: 637, travel distance X-axis: 754 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, TECHNICAL DETAILS Number of axes: 3 X travel: 754 mm Y travel: 500 mm Z travel: 500 mm Max. spindle speed: 10,000 rpm Table size length: 1,000 mm Table size width: 500 mm Control type: Heidenhain iTNC 530 Control: CNC Interface: ISO40 MACHINE DETAILS Dimensions & Weight Weight: 4,000 kg Dimensions: 2,600 mm x 2,350 mm x 2,560 mm Ijlhswyv Tmscdw Eoaw Transport packages: 3 units EQUIPMENT Documentation available CE marking available

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 400 mm, table width: 1,200 mm, table length: 660 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Table-to-spindle distance: 550 mm Rapid traverse X and Y axes: 25,000 mm/min Rapid traverse Z axis: 15,000 mm/min Spindle Taper: SK 40 Spindle speed: 200 – 20,000 rpm Motor power: 11 / 15 kW Table Table size: 1,200 × 660 mm Table load: 600 kg Pallets: 2 Pallet configuration: 1 pallet with 2 Chick clamps, 1 pallet with 4th axis Tsudakoma RNCV201 Tool Magazine Number of stations: 40 MACHINE DETAILS Machine weight: 9 t Footprint: approx. 7 m × 4.5 m × 2.85 m Total power requirement: 40 kVA Iolhcowx I Adsdw Eeaw Control Control system: Yasnac M80 EQUIPMENT 2-pallet changer 4th axis Tsudakoma RNCV201 Internal coolant supply 20 bar Coolant tank Timer Scraper conveyor Renishaw probe Spindle chiller Air cooler Electronic handwheel

Condition: good (used), Year of construction: 1996, x-travel: 380 mm y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm spindle taper MT: 2 Iaslhoua E Naocdw Eow voltage: 380/400 V

Condition: good (used), Year of construction: 2004, Internal item no.: 25046 CNC Milling Machine Kunzmann WF7 Year: 2004 Control: Heidenhain iTNC 530 Includes comprehensive accessory package - Approx. 50 tool holders (most equipped with tools) - 2x hydraulic machine vice Allmatic 125 (4t) Technical data: Travel: X 600 / Y 400 / Z 400 mm Spindle taper: SK40 Hydraulic spindle clamping Speed: 5 - 5000 rpm Feed rate: 0 - 2000 mm/min Rapid traverse: 7500 mm/min Drive power: 7 KW Table load: 250 kg Milling table (LxW): 800 x 425 mm Iolhcdjwz Sbcow Eoaw Dimensions (LxWxH): 2000 x 2000 x 2000 mm Weight: 2.2 t

Condition: used, Year of construction: 2010, x-travel 280 / 300 mm y-travel 250 / 270 mm z-travel 300 / 310 mm turning speeds 45 - 2240 U/min turning speeds 18 Stufen spindle taper ISO 40 quill stroke 60.0 mm table: 670 x 320 mm table load 150 kg feed range 12.5 - 630 mm/min feed 18 Stufen rapid traverse 1.200 mm/min workpiece weight max. 150 kg T-slots 5x 12 x 63 mm total power requirement 1.6 kW weight of the machine ca. 1100 kg range L-W-H 1265 x 1080 x 1620 mm New price ~ 25.000 Euro (!!) Special price upon request Features: - Robust electric-driven universal milling machine - ACURITE 3-axis digital display * with pivoting control panel, front right * including emergency stop button - Electric adjustment of all axes (X/Y/Z axes) * Rapid traverse in all 3 directions - Pivoting milling spindle guard Iaolhcewz Rrgodw Ejw - Coolant system - Lower chip tray - Vertical milling head with quill adjustment * Milling head rotation 90° * Tool holder ISO / DIN 40 / 2080 - Fixed angle table 670 x 320 mm * T-slot width x spacing 12 x 60 mm * Minimum distance between base table and spindle axis - 4 machine feet - Electrical diagram

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 40 rpm, table width: 1,000 mm, table load: 11,000 kg, table length: 3,200 mm, overall weight: 18,500 kg, power: 40 kW (54.38 HP), MTE BF-3200 Travel paths • X-axis (bed): 3,000 mm • Y-axis (cross): 1,200 mm • Z-axis (vertical): 1,500 mm Control • CNC control: Heidenhain iTNC 530 Table assembly • Clamping surface: 3,200 x 1,000 mm Iaslswz I Tzohcdw Eew Universal milling head • Tool holder: SK 50 DIN 2080 • Speed range: 40 – 3,000 rpm Chip conveyor Automatic tool changer 250-liter coolant unit