Milling machine

DECKEL FP 1

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base Djdpfx Aoghtvaec Noki - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: good (used), Year of construction: 2000, Manufacturer: KUKA Tip: KR 350/2 Year of manufacture: 2000 Net weight: 1870 kg Without cable and control cabinet. Dkodpfx Aceh Dwr Uj Nei Addendum to the measurement report!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input Dodpfx Aeyrnwmoc Njki - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Internal article no.: 26031 Universal milling machine Deckel FP1 Infinitely variable feed + Various SK40 tool holders + Collet set (S20x2) + Hydraulic machine vice Röhm 110 Djdeyqx S Ejpfx Ac Neki The servomotor has been overhauled! Travel: X300 / Y160 / Z340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Infinitely variable 5-500 mm/min The machine is fully functional and can be inspected under power, by appointment, in a heated storage area of over 500 m².

Condition: new, Year of construction: 2022, Power: 1,1kW Drilling capacity steel / continuous drilling capacity: 30mm / 25mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle mounting: MK-4 Drilling stroke: 120 mm spindle throat: 254 mm table size: 475 mm x 425mm Drilling table lateral tilting / rotating: 45° left / 360°. column diameter: 80 mm Quick chuck: 1 - 16 mm Djdpfx Asgulr Hjc Neki Weight: 132 kg

Condition: excellent (used), Deckel FP1 Tool Milling Machine with New Digital Readout (3-Axis) Machine No. 55192-08 Dkodpfx Asyn Iphec Noi Travel paths: X 300 mm Y 150 mm Z 340 mm Spindle speed 40-2000 rpm Feed rate 10 to 500 mm/min Fixed angle table 600 x 210 mm, max. load 200 kg Quill vertical travel 60 mm SK40 with DECKEL saw thread S20 x 2 Vertical and horizontal spindle Milling head manually swivels (+/- 90°) Equipment/Accessories: - As-new machine table - New 3-axis digital readout - Machine vice - New spindle nut X-axis - New SK40 inner spindle - Control cabinet retrofitted with new main switch - Coolant system with new hoses - Chip tray - Emergency stop The machine has been technically inspected and is in excellent working condition. Backlash X-axis 0.05 mm Backlash Y-axis 0.2 mm Backlash Z-axis 0.4 mm Net price ex works, loaded from stock

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm Dkjdpfx Acow A Apye Nei z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm Dsdpfx Acswhk Ubj Nski - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Condition: used, Year of construction: 1980, x-travel 300 mm y-travel 160 mm z-travel 340 mm Dedpfx Ajw A Ap Hsc Njki tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: good (used), functionality: fully functional, Deckel FP 1 aktiv – 3 axes, serial number 2102 – 2433, machine overhauled by Arnold around 2010, travel X/Y/Z 300/160/340 mm, spindle speed up to 2,000 rpm, infinitely variable feed in 3 axes, Heidenhain readout, weight approx. 800 kg, accessories. Dedpfx Acsyn Efme Neki

Year of construction: 1990, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition Dksdpfx Ajnr Ex Tsc Nsi - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm 1x 2-fold tool - diameter 93.80x120.90mm

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Dedpfxsw Agxro Ac Nski Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz Dedpfodzqb Sox Ac Noki - Feed on X and Z axes - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Weight: approx. 1000 kg Very good condition

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): Dodpfxewuurws Ac Nski ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg Dksdpfx Acjiy Ekve Nji good condition