Used Deckel Fp1 for sale (694)

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details Gedjxl Tcgopfx Afijuh x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm table load max. 200 kg tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a research centre. Equipment: 3-axis active digital readout made by Heidenhain TNC 113 Fixed angle table Coolant equipment Kelch mounting block Machine vise Counterholding device for the horizontal spindle

Condition: excellent (used), Year of construction: 1986, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 290 mm, Year of manufacture: 1986 Travel paths: X = 300 mm Y = 160 mm Z = 290 mm Equipment: Standard accessories Vertical milling head, SK 40/20x2 Fixed angle table 210 x 600 mm, NEW! Retrofitted safety device for milling spindle, electrically protected, NEW! Active digital display (TNC113), 3 axes Gusdpfx Ajwgafysfish Coolant system Machine light Machine feet Documentation Condition: Good, mechanics and control system workshop-tested

Condition: ready for operation (used), Working travels 300x150x340mm Universal table 600x260mm Spindle taper 40 Spindle speeds 40-2000 rpm Gsdpsdr E Apsfx Afisuh Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1980, machine/vehicle number: 4038, travel distance X-axis: 290 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 330 mm, mount diameter: 40 mm, table length: 600 mm, table width: 210 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 700 kg, CONDITION & NOTES: - This is an active, path-controlled tool milling machine Guedpfx Afowxpxmjioh

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Gsdpjw Agxrefx Afieuh Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: ready for operation (used), Cover FP 1 Milling machine Traverse path X-axis: 300mm Y-axis travel: 160mm Z-axis travel: 340mm Mounting: SK 40 with tightening thread Feed X-axis: 290mm Weight: approx. 940 kg (with pallet) Space requirement: 1300mm x 1200mm x 1800mm ( L x W x H ) Dimensions with pallet: 1400mm x 1400mm x 2000mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Guodpfx Afsuvih Hoijh Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: good (used), Year of construction: 1995, Universal tool milling machine cover FP 1 several machines see pictures Type : FP 1 3-axis digital readout Heidenhain Price : from 9.500€ excl. VAT Gujdpfx Afetdcfhjioh Technical data: x-path: 300 mm y-path: 150 mm z-path: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed steps work spindle: 8 Feed range: 10 - 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle holder: SK 40 ... Dimensions/weight: 1235x1160x1800 / approx. 800kg

Condition: used, functionality: fully functional, machine/vehicle number: 34496, Friedrich Deckel FP1, used, in good condition Gusdpfx Afexivpweioh

Condition: used, Universal Milling Machine DECKEL Type FP 1 Universal milling machine Machine No. 2101 – Year of manufacture: 1979 Manual travel X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at the vertical milling head: 60 mm - Vertical milling head can be swiveled and extended horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant system integrated in the machine base - Standalone control cabinet - Original chip tray for mounting on the machine base - Electrical schematic available Guodpfx Afer U St Ujieh Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Condition: excellent (used), Year of construction: 1974, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 150 mm, feed length Z-axis: 340 mm, quill travel distance: 60 mm, rotational speed (max.): 2,000 rpm, overall weight: 1,000 kg, input voltage: 380 V, Equipment: documentation/manual, Universal milling machine DECKEL type FP 1 Machine no.: 56699/08 Year of manufacture: 1974 Travels: X: 300 mm, Y: 150 mm, Z: 340 mm Table size: 600 x 220 mm Spindle taper: SK 40 Spindle speed: 40-2000 rpm, 16 speeds Motor power: 1.0 and 1.4 kW, pole-switchable Power supply: 380 volts, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gear speeds - Vertical milling head spindle travel: 60 mm - Fixed angle table - Integrated coolant system in the machine base - Separate control cabinet - Two-axis X Y readout with 3-axis counter Dimensions (L x W x H): 1200 x 1100 x 1600 mm Guodsxdxkmopfx Afioh Weight: approx. 1000 kg -1 precision vise -1 power vise -1 boring head -1 EROWA quick-change chuck SK 40 taper with a 3-jaw chuck -1 tilting dividing head -1 rotary table for dividing head -Tapers and collets -Clamping tools, wrenches, milling cutters Very good condition

Condition: good (used), x-travel 300 mm y-travel 340 mm z-travel 250 mm Guodpfoucphxsx Afijh total power requirement 1,5 kW weight of the machine ca. 0,8 t Heidenh. 3 axes aktiv digital display Year of construction unknown

Year of construction: 1975, condition: good (used), Lid FP1 tool milling machine, 2-axis Sony digital display, dividing head SK40, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, can be demonstrated under power by arrangement. Godpfx Afsrhzcqoiouh

Condition: used, Milling machine DECKEL FP1 Gsdexbt E Tjpfx Afijuh

Condition: reconditioned (used), Universal tool milling machine Make: harich (DECKEL) Model: A (FP 1) reconditioned with CE geometric acceptance with test report with guarantee Accessories: - 3-axis digital display FAGOR Innova 30i-M - fixed table or universal table - vertical milling head SK 40 - coolant system - operating instructions CE and safety equipment: - new machine electronics with control cabinet - cover cap on the vertical milling head with electrical protection - chuck protection hood with electrical protection - drive motor with braking function Guodpfxsdvdc Ij Afieh - control panel with emergency stop, release, start and stop buttons - new documentation for machine and control cabinet - CE declaration of conformity

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Universal Milling Machine Machine No. 2101 - Year of manufacture: 1979 Travel (manual) X: 300 mm, Y: 160 mm, Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.4 / 1.8 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Stepless feed in X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox stages - Quill stroke at the vertical milling head: 60 mm - Vertical milling head tiltable and horizontally extendable by 100 mm - Fixed angle table 600 x 210 mm - Coolant system in the machine base - Separate control cabinet Godpfxsr D T U Do Afieuh - Original chip tray mountable on machine base - Wiring diagram available Space required (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg In very good condition

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2783, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2783. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - Automatic central greasing Gusdjp Sqyuepfx Afijh - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways disambled, checked and are in excellent condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: good (used), Year of construction: 1991, 1 used universal tool milling machine Manufacturer: Deckel Type: FP 1 with Heidenhain active digital readout Year of manufacture: 1991 Technical specifications: X-travel: 300 mm Y-travel: 160 mm Z-travel: 340 mm Guedpfsw Sdmdjx Afioh Spindle taper: SK 40 Vertical quill stroke: 60 mm Table size: 600x210 mm Spindle speeds: 40–2000 rpm Machine weight approx.: 1 t Connected load: 7.5 kW Space requirement approx.: 1.6x1.3x1.8 m equipped with fixed table swivelling table universal dividing head various tool holders horizontal support

Condition: used, Counter bearing and adapter for milling machine for horizontal milling Counter bearing and adapter (counterholder) for DECKEL milling machine Gedpjxcbl Defx Afisuh (Bearing block with dovetail mounting adapter DECKEL FP1 + FP2) Type 9570 Dovetail width, narrow: approx. 72 mm Dovetail width, wide: approx. 88 mm Dovetail height: approx. 15 mm Length (bearing block): 133 mm Width (bearing block): 50 mm Total height (bearing block): 105 mm Bearing bore: Ø 17 mm (with bronze bearing bushing) Distance from bore axis to dovetail mounting face: approx. 82.5 mm (center height) - Adapter fits dovetail and mounting surface, raises center height by 22.5 mm to 105 mm Total length (dovetail rail): 635 mm Weight: 3.8 kg Very good condition

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2102-2641, Deckel FP1 Actif toolroom milling machine in very good condition. Machine Nr.2102-2641. Year of contruction 1985 Specifications: - Machine speed: 40 - 2000 rpm - Power feed X/Y/Z infinitely variable Gusdpfx Afsf E Ilzsioh - Rapid feed X/Y/Z - X / Y / Z: 300/160/340 mm - Spindle brake - Spindle nose vertical and hor. SK40/S20x2 - Weight about 800 Kg Accessories and equipment: - 3-axis actif digital readout Heidenhain TNC113 - coolant system - machine books Offered universal milling machine Deckel FP1 aktif, is in very good condition. The machine has very little crank game and all the spindles move easily. Even at maximum speeds, the milling machine runs quietly. All guideways are in very good condition. This machine has also rapid traverse in three axes. Machine is mechanical and electrical complete checked and tested and a oil change was performed. Take the opportunity to visit us to see this machine on site and try to stream.

Condition: good (used), Year of construction: 1986, 1 used universal tool milling machine make Deckel type FP 1 with active digital display Heidenhain Technical data: Godpewuu Sdofx Afieuh x-travel: 300 mm y-path: 160 mm z-travel: 340 mm Spindle holder SK 40 Table size: 600x210 mm Spindle speeds: 40-2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6x1.3x1.8 m

Condition: used, Universal tool milling machine DECKEL type FP 1 Machine no.: 52185 Year of manufacture: 1968 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 250 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.4 kW, pole-switchable Mains connection: 380 Volt, 50 Hz - Feed on X and Z axes - Two motor speeds and 8 gearbox speeds - Quill stroke on vertical milling head: 60 mm - Fixed angle table - Coolant system in the machine base - Free-standing control cabinet - Counter support with counter bearing for horizontal milling SK 40 Required space (L x W x H): 1200 x 1100 x 1600 mm Gsdpfedzqb Sox Afijuh Weight: approx. 1000 kg Very good condition

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine No. 28317 Year of construction approx. 1960 travel X: 245 mm Y: 150 mm Z: 340 mm table size 600 x 210 mm spindle admission horizontal MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 0,8 and 1,1 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - Pinol shift at vertical milling head 60 mm Gjdoiy Ekvopfx Afisuh - vertical milling head +/- 90° tiltable - Metal base made of angle iron with machine feet space requirement L x W x H 1100 x 900 x 1650 mm weight 650 kg good condition

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Gujdpfx Aeghtvaofioh Machine No. 51265 Year of construction: approx. 1967 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 2100 mm Spindle taper: SK 40 - S20 x 2 Spindle speed: 40-2000 rpm, 16 steps Motor power: 1.0 and 1.6 kW, pole-changeable Power supply: 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed adjustment via 2 motor speeds and 8 gearbox steps - Quill travel on vertical milling head 60 mm - Fixed angle table - Separate control cabinet beside the machine Required space (L x W x H): 1100 x 1100 x 1600 mm Weight: 650 kg Good condition

Condition: used, Univ. tool milling machine DECKEL type FP 1 Machine no. No. 34338 Year of construction approx. 1965 Travel X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle holder MK 4 - S20 x 2 Spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm 12 steps Motor power 1.0 and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gear stages - Feed in the X- and Z-axis - Coolant device with mechanical pump in the machine base - Pinol displacement on the vertical milling head 60 mm - Pivoting, rotating and tilting angled table - Adjacent control cabinet Space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition Godpfoic R I Rex Afiouh

Condition: used, Universal tool milling machine DECKEL type FP 1 Gujdpfxjdzp T Ee Afieh Machine No. 33064 Year of manufacture approx. 1960, overhauled in 2012 Travel X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95–1900 rpm, 12 steps Horizontal spindle speed: 60–1200 rpm, 12 steps Motor power: 1.1 and 1.4 kW Power supply: 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on the vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable connector Space requirement L x W x H: 1100 x 900 x 1600 mm Weight: approx. 900 kg Good condition Machine was overhauled in 2012