Tool Room Milling Machine - Universal

MACMON M 100

Condition: ready for operation (used), Tool milling machine MACMON M100 incl. digital display Klodpfxjzdui Ee Ah Eeu - Digital display - Travel ranges X/Y/Z 310x340x170mm - Speed range 40-2500 RPM - Automatic feeds - Feed rate range in steps 9 - 450 mm/min - Tool holder ISO 40 - Swiveling vertical head - Drilling quill / vertical head 70mm - Horizontal / vertical milling attachment - Rigid angular table 600x225mm - Coolant system - Drive power 2.5 KW - Chip tray - Work light - Machine feet - Documentation Dimensions: LxWxH 1.5x0.8x1.7 meters / Weight 950 kg Errors and omissions excepted.

Condition: used, Year of construction: 1973, turning diameter over bed 490 mm turning diameter over slide rest 280 mm turning length 2000 mm centre height 245 mm centre distance 2000 mm spindle bore 62 mm Klsdpstqqvvofx Ah Eeu total power requirement 7,5 kW weight of the machine ca. 3,5 t dimensions of machine L x W x H 3,78 x 1,17 x 1,42 m Accessories: 3-jaw chuck 240 mmø, face plate 400 mmø, MULTIFIX-tool post, solid steady, coolant

Condition: good (used), Year of construction: 1998, functionality: fully functional, Universal tool milling machine Product: MACMON Type: M 100 ADR Technical Data: - Heidenhain TNC124 control Kodpsrwml Ajfx Ah Eolu - Machine number: 7989 - Year of manufacture: 1998 - Travel: X 310 mm Y 170 mm Z 330 mm - Speed range: 40-2500 rpm (infinitely variable in 2 ranges) - Feed rate: 10-800 mm/min (infinitely variable) - Rapid traverse: 800 mm/min - Equipment: Vertical & horizontal spindle (incl. lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Space requirement: 1000x1160x1400 Incl. complete documentation The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: good (used), Year of construction: 2005, Internal article no.: 24012 Universal milling machine Macmon M100 NC YEAR OF MANUFACTURE: 2005 Control: Heidenhain TNC124 + coolant pump Ksdpfxsrywa Ro Ah Eolu + machine vice Travel: X 310 / Y 170 / Z 330mm Speed: 40-2000 rpm Mounting: SK40 LxWxH: 1200 x 1600 x 1850mm Weight: approx. 1000Kg

Year of construction: 1985, condition: used, 1 used engraving machine Manufacturer: KUHLMANN Ksdek Tt Axspfx Ah Eolu Type: GM I-I Working area: 320 x 200 x 280 Stencil table: 500 x 400 mm Work table: 500 x 200 mm 3D form engraving attachment TGV plate engraving attachment Various stencils and type sets Various engraving tools Speed range: 4,200 – 20,000 rpm Space requirement: approx. 1.2 x 1 x 1.5 m Weight: approx. 250 kg

Condition: used, Year of construction: 1999, x-travel 290 mm y-travel 170 mm z-travel 310 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 50 - 2600 U/min Klsdpowngkrofx Ah Eeu feeds 9 - 450 mm/min quill stroke 70 mm total power requirement 5,5 kW weight of the machine ca. 720 kg - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, coolant

Condition: used, Year of construction: 1990, Universal tool milling machine Make: MACMON Model: M 100 E Year of manufacture: 1990 – workshop tested Machine No.: 1479 Geometrical inspection with test protocol Ksdpox Ada Refx Ah Eelu Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine conforms technically to the state of the art at the year of manufacture.

Condition: good (used), Year of construction: 1969, Work table Clamping area 500 x 200 mm Distance between milling spindle and work table 300 mm Longitudinal movement of the table, manual 300 mm Transverse movement of the table, manual 160 mm Template table Template table 550 x 324 mm Distance between pantograph arm and clamping area 20 mm Rotatable 360° Template slots 7 pcs., spacing 45 mm Milling spindle Spindle speeds 1,900 – 15,000 rpm Kedpfx Ahjidckfj Eslu Cutting speed 1 – 226 m/min Motor speed 2,800 rpm Internal taper of the tool spindle 1:5 Size of the collet bore 6 mm Adjustability of the spindle 1 mm fine, 3 mm coarse Pantograph Transmission ratio 1:1 to 1:50 Drive power 0.2 kW Dimensions Footprint L x W x H 1400 x 1000 x 1420 mm Weight 260 kg Accessories / Special features: • 1 set of templates with letters and numbers • Stylus

Condition: good (used), Year of construction: 1990, Macmon M 100 E tool milling machine with 2-axis Elesta-Heidenhain digital readout from training department , rigid table , SK 40 spindle holder. Good working condition, can be demonstrated under power by arrangement. Klsdpfxsrazzre Ah Eeu

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Kljdpfx Aov Azb Nsh Eeu

Condition: good (used), Clamping surface of the fixed angle table: 195 x 605 mm Table travel longitudinal/vertical automatic and manual: 290/300 / 330/340 mm Spindle head transverse travel manual: 150 mm Spindle taper: ISA 40 16 spindle speeds: 40 - 2000 rpm 16 feeds: 10 - 500 mm/min Kedpfxjyvgf Re Ah Eelu Spindle drive motor: 380 V, 1/1.4 kW Weight approx.: 660 kg Space requirement: 1200 x 900 x 1570 mm

Year of construction: 1978, condition: excellent (used), Macmon M 100 D tool milling machine with 3-axis Fagor digital display, from a training department. Features a fixed table and SK 40 spindle mount. Accessories include various collets and milling arbors. In very good, operational condition; can be demonstrated under power by arrangement. Ksdpfx Ahehtfube Ejlu

Year of construction: 1997, condition: good (used), Macmon M 100 RE tool milling machine with 3-axis Heidenhain digital display, from a training department, with a fixed table and SK 40 spindle mount. Accessories: electric spindle guard, various collets and milling arbors. In good, operational condition; can be demonstrated under power by arrangement. Klsdpfx Ahohgmmzj Eju

Condition: good (used), 1 x Universal milling machine Macmon Klsdpfx Aet Sdaieh Eeu M 100 in very nice condition from vocational school. Technical data and more photos will follow. The machine can be inspected under power.

Condition: used, Year of construction: 1995, functionality: not functional, spare parts donor Kledpfx Aoyyaploh Esu