Used Vertical Milling Head for sale (21,917)

Condition: good (used), 1 used, well-maintained vertical milling head with large overhang, previously installed on a PAMA (Origin Italy) boring mill. Spindle taper: SK 50 Overhang: 660 mm Flange dimensions: 465 x 440 mm Internal bore: 294 mm Speed range: up to approx. 1,500 rpm Max. drive power: approx. 22 kW Dimensions (L x W x H): 750 x 440 x 465 mm Hedpfxoyc Nhho Adash Weight: 240 kg Accessories / Special features: • 1 rotatable axis (left/right) • Continuously adjustable angle, manual • 4 fixed indexing points at 90° each with locating pins • Tool clamping with drawbar • Suitable for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, swivels left/right, manual tool clamping, ... Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Hsdpfx Aoxddwrjdaoh Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: used, Year of construction: 1984, Milling Head vertical accessory for a milling machine Fritz Heckert FSS 400 - weight 255 kg Hsdpfou N E Abox Adaeh - dimensions: LxWxH: 560 x 500 x 400mm - swiveable 90° right / left - clamping area 500 x 400mm *

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Hedpfx Aev U I Slodaeh Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm *

Condition: used, Accessories for e.g. a bench drill BFT 130: The spindle head and swivel angle can be swivelled 360° around their own axes. Two swivel planes The set angles can be read off on circumferential scales Speed max. 600 rpm. Spindle taper ISO 50 Weight approx. 270kg Hsdsu Nlgyepfx Adajh incl. connecting piece to the drive SK 50 pinoler/head *

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Hjdpsxf Ur Nofx Adajh

Condition: used, Slotting head, suitable for DECKEL type FP 2 milling machine Manufacturer No. 2211 / 1895 Dovetail width: approx. 76 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 320 mm Dovetail leading edge to gear center: approx. 235 mm Stroke size: max. 80 mm Hjdpfx Aowbi Rbodash Stroke rate: max. 210 double strokes/min. Tool holder: square, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Driven by the machine gear, within the dovetail guide (as with a normal vertical head) - This slotting head is inserted into the dovetail guide in place of the normal vertical milling head (Mounted in place of the vertical milling head, milling head) - Drive gear in the slotting head, 39 teeth, gear width 16 mm, presumably 20° pressure angle - Slotting head on the flange plate can be rotated 360°, degree scale +/- 35° Weight: 32 kg Very good condition DECKEL FP1 has a pressure angle of 15° on the drive gear DECKEL FP2 + FP3 - has a pressure angle of 20° on the drive gear

Condition: used, Vertical milling head, milling head, angle milling head WMW HECKERT Hodpfxoxcbp As Adash Year of manufacture: approx. 1985 Tool holder: SK 40 Quill stroke: approx. 85 mm Centre diameter at the flange plate: 200 mm Bolt circle diameter at the flange plate: Ø 175 mm Mounting threads at the flange plate: 4x M16 - Head drive with splined shaft - SK40 adapter for head drive via splined shaft - Degree scale on the angle milling head 2x 90° - Draw bolt for tool holder with M16 - Solid intermediate flange for adapting to a WMW FW 250x1000 milling machine Dimensions L x W x H: 530 x 380 x 240 mm Total weight: 95 kg In good condition

Condition: used, Slotting head for milling machine, milling head, CCCP / UDSSR STANKO type 1502 No: 200 Year of manufacture 1974 Hodjd Dk A Aopfx Adaeh Stroke size: max. 60 mm Stroke rate: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: Ø 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is like the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly pivotable - This grooving head is flange-mounted in place of the normal vertical milling head (mounting in place of the vertical milling head, milling head) Weight: 42 kg good condition Slotting head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: like new (used), 1 unused universal vertical milling head suitable for an ORADEA / EURO-MILL FUS 32 type "MAHO", ISO 40 mounting, quill stroke 100 mm, rated drive power approx. 3-4 KW, max. speed 2000 rpm, ... Special accessories: - Multiplier, transmission ratio 1:4, ISO 40 mounting Price: 499,00 EUR - Attachment for automatic feed device for the vertical milling head quill, ... milling head quill, "MAHO" system, 6 feeds 0.02 - 0.2 mm/rev Price: 1,880.00 EUR - Cross milling head, additional head for vertical milling head with spindle taper ISO 30, rotatable, 360 degrees Price: 585,00 plus VAT Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel Hjdpfxeddtwbs Adajh

Condition: excellent (used), Universal vertical milling head This milling head was used on a Union TC130 bench boring machine and can be adapted to many other machines. About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a free specialist for SHW machine tools. Our main focus lies in the field of tool milling machines. Our services include the supply of spare parts, on-site customer service, machine overhauls and control modernization. Services: - Used machines - spare parts - after-sales service - machine service - machine overhauls Hodofica Rjpfx Adash - control modernization

Condition: excellent (used), 1 used, very well-maintained universal milling head system "HURON" with automatic 2.5° indexing on 1 axis, internal spindle cooling, and hydraulic tool clamping. Make: CME, Origin Spain Model: FS Hsdpfx Asyf Uqtsdaoh Spindle taper: DIN 69871 AD, ISO 50 Max. speed range: 4,000 rpm Max. drive power: 22/30 kW Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2018, x-travel 1.270 mm y-travel 508 mm z-travel 635 mm distance spindlenose to table 107 - 742 mm spindle tunring speed 12.000 U/min spindle drive 22,4 kW Hjdsyf N Hpepfx Adaoh max. torque 122 Nm table dimensions 1.321 mm rapid traverse ( x / y / z ) 495 m/min In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical specifications & accessories: - Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Hjdpjyf H Ecsfx Adaeh Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 dimensions: 1.100 x 1.100 x 1.660 mm

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Hedpfjyf Hzkox Adaoh Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Angle head: 360° adjustable Weight: approx. 8 kg The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Hjdpfx Adoyf Dp Eoash Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Hjdpjwth Sbjfx Adaoh Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2016, Control Heidenhain x-axis 1.500 mm y-axis 700 mm z-axis 610 mm Number of working hours ca. 14.724 h spindle hours ca. 4.873 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: Hjdpfjyfh Sdox Adaoh - direct displacement measuring system Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2018, x-travel 1.060 mm y-travel 600 mm z-travel 560 mm Control Heidenhain TNC 640 Hsdjydqrdepfx Adaeh table dimensions 1.120 x 520 mm spindle tunring speed 12.000 U/min power capacity 11/31 kW tool taper SK 40 number of tool places 30 Pos. rapid traverse ( x / y / z ) 48/48/32 m/min weight of the machine ca. 6.850 kg auto power on hours ca. 9.848 h spindle hours ca. 2.854 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Internal coolant supply, 20 bar - Oil separator - Prepared for 4th/5th axis Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Hedpfx Adsydl E Eoaeh Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available

Condition: new, • EPB Graflex A700 60 boring head • Made in France • Working range: • Capacity 1: 85–115 mm (3.345–4.530”) • Capacity 2: 114–144 mm (4.485–5.670”) • Precision adjustment 0.01 mm (0.0004”) • Catalogue no.: 1605.014.24 • Graflex system – for professional applications Hedpfxew Rdybs Adash • The head is in storage condition • No evidence of use. Only minor storage scratches • Sockets and scales in perfect condition • Mechanism operates smoothly and easily • Ready for immediate use • EPB Graflex stands for proven quality and reliability

Condition: excellent (used), For sale: high-quality face mill with indexable inserts ASF-35-45-20 mounted on an SK40 arbor. A professional tool for roughing and finishing operations, ideal for use in CNC machining centers and conventional milling machines. The cutter head's 45° approach angle ensures excellent cutting performance, longer insert life, and a smooth surface finish on the workpiece. • Type: face mill with indexable inserts • Model: ASF-35-45-20 • Mounting: SK40 / DIN 69871 • Approach angle: 45° • Number of insert seats: approx. 6–8 • Application: milling of steel, cast iron, stainless steel, and other structural materials • Condition: used – very good, ready for operation Hedexk T Igepfx Adaoh

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, CNC control Heidenhain TNC620 4th axis (NC dividing head) electronical handwheel 24-fold automatic tool changer coolant through spindle device chip conveyor exhaustion device Hsdpfx Aetqd E Esdajh Technische Daten / technical details: X-Weg / X-travel 1000 mm Y-Weg / Y-travel 550 mm Z-Weg / Z-travel 550 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 10000 UpM /rpm Tischaufspannfläche / table clamping area 1000x600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel 40%ED / drive capacity spindle 40%ED 13,5 kW Gewicht ca. / weight 6000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 630 mm, CNC control Fanuc O-M 24-fold tool changer electronical hand wheel chip tank Technische Daten / technical details: X-Weg / X-travel 850 mm Y-Weg / Y-travel 550 mm Z-Weg / Z-travel 630 mm Spindelaufnahme / spindle taper ISO40 Drehzahl / spindle speed 8000 UpM / rpm Tischaufspannfläche / table clamping area 1000x540 mm Werkzeugwechselmagazinplätze / number of places in tool changer 24 Gewicht ca. / weight ca. 5500 kg Hjdpfxovfrdge Adaeh Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, CNC control Sinumerik 828D 24-fold automatic tool changer chip conveyor Hjdpfxjwu Tpns Adaoh coolant through spindle device measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 520 mm Verfahrweg Z / Z-Travel 550 mm Tischgröße / table size 1100x500 mm Drehzahlbereich / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 24 fach Antriebsleistung Spindel / drive capacity spindle 9/22 kW Gewicht der Maschine ca. / weight 5500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.