Used crushing units for sale (131)

Condition: good (used), Year of construction: 2023, operating hours: 60 h, functionality: unexamined, Equipment: Methor "hook lift" basic package - 24 V electric control Dwelhcdwjvrw Tme Dsd - maintenance-friendly engine compartment with LED light - folding hopper with position sensor and automatic control - hydraulically reversible fan wheel - acoustic start-up warning - paintwork: RAL 2011 deep orange Additional equipment: Hook lift in accordance with DIN 30722-1 (Germany) Crushing system size L (8 teeth) Three-phase motor 200 kW-EUROPA + electric pump Radio system hook lift large Rear conveyor 6.9 m Frame for overband magnet Overband magnet Additional hydraulic connection 70 l/min

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. The ideal machine for shredding voluminous, light aluminum chips or turnings. Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net Dolhcdegmh H Tew Djwd - Overband magnet + €6,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: ready for operation (used), Product Type Jaw Crusher Dimensions (L x W x H) 800 x 320 x 960 mm Display Type Analog Electrical Requirements 400 V, 50 Hz For Use With (Application) For pre-crushing hard, brittle products with a degree of hardness >3 on the Mohs' Scale Height (Metric) 960 mm Hertz 50 Hz IP Rating IP54 Length (Metric) 800 mm Material Manganese Steel, Stainless Steel Model BB 100 Phase 1-phase motor / 3-phase motor Voltage 400 V Watts 750 W Width (Metric) 320 mm Type: Mangan Good working condition Please check out our other listings as well. Dsljxvptvjhcdw Dowd

Condition: excellent (used), For sale: Retsch BB300 Jaw Crusher (Manganese) The machine is fully operational and in EXCELLENT technical and visual condition – only occasionally used. Application: Crushing of medium-hard, hard, and tough materials with hardness up to 10 on the Mohs scale. - Gap width (mm): 1-40 - Feed grain size (mm): < 150 - Final grain size (mm): 5-40 Dolexckcrehcdw Djwd - Sample volume/capacity: up to 600 kg/h - Motor power (kW): 3.0 - Crushing jaws made of manganese steel

Condition: used, Year of construction: 2014, With FABO Guarantee Purchased & Overhauled by FABO: The machine was purchased by our company and has undergone all necessary inspections. Comprehensive Maintenance: All service and maintenance procedures have been meticulously completed. Replaced Wear Parts: All worn-out wear parts have been replaced to meet original quality standards. Ready for Immediate Use: The machine is in stock and can be shipped to your construction site the same day it is purchased. Technical Specifications: Model: Sandvik QI441 Serial Number: 1884BG14205 Dwjlhcdwsxu Aibe Ded Operating Hours: 17,000 hours Capacity: 300 – 500 tons/hour Crusher Dimensions: 1380 x 800 mm Motor : CAT 328 kW Weight: 52,500 kg Year of Manufacture: 2014

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,308 h, functionality: fully functional, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately Dwolhcdsxuqv New Dsd

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55 kW (74.78 HP), ### Introduction to Jaw Crushers A jaw crusher is a type of primary crusher used in mining and ore processing plants. It works by using compressive force to break down large rocks into smaller, more manageable pieces. The machine consists of a fixed jaw and a movable jaw, which together create a V-shaped cavity called the crushing chamber. The movable jaw exerts force on the rock by forcing it against the stationary plate, causing it to break. Key Components: - Fixed Jaw Plate: Mounted in a fixed position. - Movable Jaw Plate: Mounted on a pitman that moves in a reciprocating motion. - Flywheel: Provides the necessary inertia for the crushing action. - Toggle Plates: Serve as a safety mechanism, ensuring that the jaw crusher operates efficiently and prevents damage. ### Working Principle The working principle of a jaw crusher is based on the reciprocating movement of the movable jaw against the fixed jaw: 1. Feeding: Large rocks are fed into the top of the crusher. 2. Crushing: As the movable jaw moves back and forth, it crushes the material against the fixed jaw. 3. Output: Crushed material is discharged from the bottom of the crushing chamber. Dolhcoq Nf Tvedw Djwd ### Applications of Jaw Crushers Jaw crushers are versatile and can be used in a variety of industries and applications, including: 1. Mining and Mineral Processing: - Primary crushing of mined ore (gold, copper, iron, etc.). - Size reduction of rocks to facilitate further processing (e.g., milling). 2. Construction and Demolition: - Crushing of concrete, bricks, and other construction materials. - Recycling of building materials to create aggregate for new construction. 3. Aggregates Production: - Crushing of raw materials to produce aggregates for concrete and asphalt. - Production of road base and railway ballast. 4. Industrial Applications: - Crushing materials in chemical processing plants. - Size reduction of materials for production processes in various industries. 5. Environmental Management: - Processing of materials for landfill cover. - Recycling operations to reduce waste and promote sustainable practices. ### Advantages of Jaw Crushers - High Crushing Ratio: Capable of producing a range of material sizes with a single pass. - Durability and Reliability: Built to withstand heavy-duty use and harsh conditions. - Simple Structure: Easy to maintain and repair, with fewer components compared to other types of crushers. - Versatility: Suitable for various types of materials and a wide range of applications. - Energy Efficiency: Efficiently uses energy, making it cost-effective for operations. ### Examples of Use Cases - Mining Operations: Jaw crushers are used as primary crushers in mine sites to crush large rocks before being processed further in the milling process. - Construction Sites: Used to break down concrete and other building materials for recycling and re-use. - Aggregate Production: Integral in producing the base materials for construction and infrastructure projects. - Demolition Projects: Efficiently crushes and recycles materials from demolished structures. By understanding the introduction and applications of jaw crushers, businesses can make informed decisions about integrating this machinery into their operations for efficient and effective material processing.

Condition: as good as new (ex-display), Demonstrator with 7 operating hours Another machine available immediately (ex works in Neckartailfingen) MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slide gate Screen perforation of your choice (10 - 40 mm) Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant Dwsljv Sqrpohcdw Ded . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Raise the shredder by 30 cm (prepared for conveyor belt) Additional shredder options: - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €6,780 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH SW series mobile sand washing and screening plants deliver maximum performance in the field with high efficiency and flexible usage capabilities. Used for washing, screening, and classifying natural sand and gravel, these plants can be easily positioned even in confined spaces thanks to their compact design. Having all equipment assembled on a single mobile chassis significantly reduces setup time and makes transportation extremely practical. These plants, which can be quickly moved from site to site, provide businesses with significant savings in both time and money. SW-1240 Production Capacity: 60 t/h Screen Dimensions: 1,200 x 4,000 mm Helical Washer Dimensions: 400 x 4,000 mm Feed Height: 4,600 mm Total Motor Power: 37 kW Electric Generator Requirement: 75 kVA Weight: 20,000 kg Transport Dimensions: 15(L) x 2.8(W) x 4.2(H) m SW-1640 Production Capacity: 80 t/h Screen Dimensions: 1,600 x 4,000 mm Helical Washer Dimensions: 500 x 5,000 mm Feed Height: 4,650 mm Total Motor Power: 41 kW Electric Generator Requirement: 85 kVA Weight: 24,000 kg Transport Dimensions: 15.5(L) x 3.25(W) x 4.3(H) m SW-1850 Production Capacity: 150 t/h Screen Dimensions: 1,800 x 5,000 mm Helical Washer Dimensions: 600 x 6,000 mm Feed Height: 4,700 mm Total Motor Power: 50 kW Electric Generator Requirement: 100 kVA Weight: 32,000 kg Transport Dimensions: 16(L) x 3.65(W) x 4.4(H) m SW-2060 Production Capacity: 200 t/h Screen Dimensions: 2,000 x 6,000 mm Helical Washer Dimensions: 700 x 7,000 mm Feed Height: 4,750 mm Total Motor Power: 55 kW Electric Generator Requirement: 120 kVA Weight: 37,000 kg Transport Dimensions: 17(L) x 3.85(W) x 4.5(H) m Delhsxqgy Nocdw Dewd Why Choose CONSTMACH Mobile Sand Washing and Screening Plant? CONSTMACH combines quality, durability, and user-friendly design in its mobile sand washing and screening plants. Manufactured to European standards, our machines exceed industry expectations with their high washing capacity and low maintenance costs. Every plant we produce, backed by years of engineering experience, aims to ensure uninterrupted efficiency in our customers' production processes. Offering portability, quick installation, and high performance, these plants give you maximum flexibility at every stage of your projects. Choose the CONSTMACH brand for quality production, technical support, and reliable service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, overall weight: 15,000 kg, Equipment: documentation/manual, A thoroughly refurbished Brown Lenox Kue-Ken jaw crusher for sale. Model KK-80. Specification: - manufactured in the UK by Brown Lenox, - capacity 95t per hour, - mounted on a mobile chassis, - Diesel Z-8001 engine (80 HP), - hopper dimensions: 3000mm x 1500mm (118" x 59") - inlet dimensions: 915mm x 305mm (36" x 12") - adjustable gap: 38mm - 75mm, - a general refurbish of the entire machine (engine, crusher, chassis) was carried out in 2023, - technical documentation, - we issue a VAT invoice, Delhcdwor E Alie Dewd The renovation of the machine cost a total of EUR 17,500 net (invoices available for viewing). During the renovation, we performed a general overhaul of the engine (regeneration, replacement and sealing of all elements), a general overhaul of the crusher (new eccentric shaft, new pitman, new diaphragm, new shaft lubrication system, new main bearings, new clutch, etc.), a general overhaul of the chassis ( protective barriers, floor, replacement of corroded elements, repainting). The machine is fully operational. Ready for work. I invite you to inspect the machine.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 Dwolhexur Sfecdw Dod • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: used, Year of construction: 2020, The shredder breaks large, bulky pieces made of Styrofoam and EPS and similar materials with a maximum raw density of 30kg/m³ into small pieces. The shredder reduces the volume by around 65%. This makes the machine ideal for use in industrial and craft companies as well as for wholesale and retail trade with Styrofoam packaging material. Throughput: Sieve 10 mm: approx. 3 m³/h Sieve 20 mm: approx. 8 m³/h Sieve 30 mm: approx. 13 m³/h Sieve 40 mm: approx. 18 m³/h Sieve 50 mm: approx. 23 m³/h Depending on the sieve set, the volume can be reduced by 3:1 just by shredding your Styrofoam residues. Custom-made products are available on request. VAT is shown separately on the invoice. Shipping included throughout Germany, islands with surcharge. Dwjlhcjxm T I Sjdw Dod If you have any questions, please feel free to contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Dolhcdwsq H Shcs Dswd Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Condition: as good as new (ex-display), Year of construction: 2023, Demonstration machine with approximately 10 operating hours Another machine available immediately (ex works in Neckartailfingen) *Options available for an additional charge - see below Included: + Profile rotor for higher throughput We would be happy to conduct a free test with your material. I invite you to visit us in Neckartailfingen. You can also send us your material via freight forwarding, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15, multi-rotatable, Double row of blades available for an additional €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Funnel volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 40 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg Dimensions (l x w x h): approx. 1,737 x 1,167 x 1,650 mm Dwjlhcdeb Ny Eyew Dod Moisture content: < 30% dry matter . Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start-up - Fast hydraulics - Automatic OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . Shredder options available for an additional charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,080 net - Eco-Rings: + €1,980 net (recommended for more than 20% hardwood) - Double row of blades + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or items with a material thickness of less than 3 mm) - Bent conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm - Automatic overhead magnet + €5,980 net Alternatively, a fixed magnetic block above the conveyor belt for regular manual scraping + €990 net (for low-volume shredding) Metal parts) - Conveyor belt and overhead magnet control + €2,750 net (Start and stop synchronized with the chipper) or manual start and stop of the belts + €595 net . Raw material requirements: - Moisture content (absolute dry matter) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2025, functionality: fully functional, color: other, Equipment: cabin, hydraulics, CONSTMACH JS-1 mobile jaw and impact crusher is a high-efficiency mobile crushing and screening plant designed for processing natural stones such as medium-hard limestone, dolomite, and river stone. The JS-1 is manufactured with advanced engineering expertise and offers maximum efficiency even in challenging site conditions thanks to its durable components, high-performance crushers, and compact design. The system's first chassis features a CJC-60 primary jaw crusher, a vibrating feed hopper, a bypass belt, and a wheeled mobile chassis with hydraulic legs. The second chassis houses a CSI 1210 secondary impact crusher, a three-deck vibrating screen, a return belt, foldable stockpile belts, and a dust suppression system. Delsxqg Elohcdw Dewd Thanks to the powerful impact crusher design of the JS-1, the final products have an excellent cubic shape, providing ideal aggregate quality, especially for concrete production. The plant's production capacity varies between 60 and 80 tons per hour, depending on the hardness of the rock. Thanks to its user-friendly automation system, SIEMENS – SCHNEIDER brand components, and PLC control, the plant can be fully automatically managed via a tablet. Installation is completed in a short time, and the need for external equipment is minimized thanks to hydraulic opening mechanisms. The JS-1 can be easily transported with a single tractor due to its dimensions suitable for international road transport. JS-1 - Mobile Jaw and Impact Crusher Technical Specifications Production Capacity: 60-80 tph Maximum Feed Size: 600 x 380 mm Feed Height: 4.5 meters Main Configuration: Jaw Crusher + Secondary Impact Crusher + Vibrating Screen Total Motor Power: 275 kW Electric Generator Requirement: 550 kVA Plant Weight: 60 tons (total of two chassis) Plant Dimensions: 1st chassis 11x3x4.4 m / 2nd chassis 3.35x4.3x17.8 m Chassis Type: Double Chassis Why Choose the JS-1 Mobile Crushing and Screening Plant? CONSTMACH JS-1 is an excellent choice for professionals seeking maximum efficiency, minimum operating costs, and superior product quality in the rock crushing process. Its fully automatic control system, high mobility capability, and durable construction offer uninterrupted production for many years. Furthermore, CONSTMACH's engineering expertise, after-sales technical support, and spare parts supply guarantee ensure the continuity of your business. If you are looking for quality, performance, and reliability in stone crushing solutions, experience the difference with the JS-1 Mobile Jaw and Impact Crusher, backed by CONSTMACH quality. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE VSI Vertical shaft impact crushers are used to obtain fine sand and fine gravel from the hardest with a high degree of abrasive materials such as basalt, granite, gabbro, riverstone etc. This type of crushers acting as tertiary crushers in facilities with it’s high cubic ratio and fine product. These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and time, and to increase their crushing performance with their low investment costs. Dwjlhcdwjxryafe Dod General Specifitions and Features: - Fine product, low wear cost, cubic shape, application flexibility and maintainability. - Rotor and crushing chute with stress relieved welding - Inner surfaces of the crusher is coated with wear resistant lining plates - Hydraulic opening cap -Automatic Lubrication system • Model: FABO VSI-900 • Type: Vertical Shaft Impact Crusher Closed rotor • Capacity: 100-300 tph • Max Feeding: 45 mm • Rotor Size: Ø 900 mm • Speed: 50-70 m/s • Motor: Heavy duty GAMAK, 2 X 160-200 kW Bearings: Heavy duty SKF-FAG • Weight: 14000 kg • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, Year of construction: 2025, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. Dwslhcdwjq N Ud Io Dod - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: new, Year of construction: 2024, Consisting of a bale shredder for large bales, type MHB and a straw shredder, type MHZ 1) Bale shredder MHB: Special price starting at €29,975 net (production time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (VFD) - this controls the speed of the scraper floor. The bales are placed on the scraper floor and the cutter's feed is activated. The cutter's tines tear the straw from the bale and throw it into the hopper. Ideally, a combination of bale shredder and straw shredder is recommended. Technical specifications for bale shredder: Capacity: 1-2 bales per hour up to a maximum of 600 kg per hour (depending on the screen size used in the straw mill and the power of the straw mill. Without the straw mill, the bale shredder can shred straw up to a maximum of 900 kg per hour) Maximum square bale size: 2400x1200x800 mm (LxWxH) Rotary cutter motor: 5.5 kW, 380 volts Scraper floor feed: 0.75 kW, 380 volts Dimensions: 3750x1730x2460 mm (LxWxH) Weight: 400 kg 2) Straw shredder MHZ 600 - 11/15 kW; Available immediately Special price from €7,995 net Dolheb Nulhjcdw Dswd Special hopper: + €970 (only in conjunction with bale shredder) Surcharge for the even larger straw shredder (18.5 kW) + €3,940 net Technical specifications, MHZ with special hopper: Motor: 15 kW 380 volt electric motor Diameter: 600 mm Hardened cutting blades Sieve with replaceable inserts Optional (10, 12, 15) 22, 30, 45 mm perforation With star-delta switch, Ue protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing width: approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Options For an additional charge: Intake auger + €970 net Cyclone (mounted by customer) *should be located a maximum of 10 m away + €2,970 net Simple filter €1,750 net --- Further options: Industrial extraction system (demonstration) + from €9,950 net Optional with rotary valve *depresses the material + €5,750 net Control system: from €1,620 net Special shredder extension 3 m *other dimensions must be calculated + €9,750 net Briquetting press MPP 180 S; Little-used demonstrator 70 mm briquettes - up to a maximum of 100 kg/h from €39,700 net * larger machines available upon request --- Description: The muetek bale shredder was developed for shredding round and square bales of hay and straw. The shredder flanged to the bale shredder shreds straw from all types of grain, hay, corn, and miscanthus. The muetek machines of the MHZ/MHB series are characterized by their robust design and solid construction. muetek bale shredders of the MHB series are equipped with a chain conveyor onto which the straw bale is placed using the front loader. The support is adjustable depending on the bale type. The chain conveyor presses the bale against the milling rotor, and the feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The straw separated from the bale is ejected. --- The machines generally work for dry raw materials: - Straw - Hay --- Hemp shredding only works with a special shredder. Surcharge: approx. €9,720 net * depending on the model. Hemp shredding does not work with the straw mill. Requirements for the raw material: Maximum moisture content 12%

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH SW series mobile sand washing and screening plants deliver maximum performance in the field with high efficiency and flexible usage capabilities. Used for washing, screening, and classifying natural sand and gravel, these plants can be easily positioned even in confined spaces thanks to their compact design. Having all equipment assembled on a single mobile chassis significantly reduces setup time and makes transportation extremely practical. These plants, which can be quickly moved from site to site, provide businesses with significant savings in both time and money. SW-1240 Production Capacity: 60 t/h Screen Dimensions: 1,200 x 4,000 mm Helical Washer Dimensions: 400 x 4,000 mm Feed Height: 4,600 mm Total Motor Power: 37 kW Electric Generator Requirement: 75 kVA Weight: 20,000 kg Transport Dimensions: 15(L) x 2.8(W) x 4.2(H) m Dwjlhoxpxq Dscdw Dod SW-1640 Production Capacity: 80 t/h Screen Dimensions: 1,600 x 4,000 mm Helical Washer Dimensions: 500 x 5,000 mm Feed Height: 4,650 mm Total Motor Power: 41 kW Electric Generator Requirement: 85 kVA Weight: 24,000 kg Transport Dimensions: 15.5(L) x 3.25(W) x 4.3(H) m SW-1850 Production Capacity: 150 t/h Screen Dimensions: 1,800 x 5,000 mm Helical Washer Dimensions: 600 x 6,000 mm Feed Height: 4,700 mm Total Motor Power: 50 kW Electric Generator Requirement: 100 kVA Weight: 32,000 kg Transport Dimensions: 16(L) x 3.65(W) x 4.4(H) m SW-2060 Production Capacity: 200 t/h Screen Dimensions: 2,000 x 6,000 mm Helical Washer Dimensions: 700 x 7,000 mm Feed Height: 4,750 mm Total Motor Power: 55 kW Electric Generator Requirement: 120 kVA Weight: 37,000 kg Transport Dimensions: 17(L) x 3.85(W) x 4.5(H) m Why Choose CONSTMACH Mobile Sand Washing and Screening Plant? CONSTMACH combines quality, durability, and user-friendly design in its mobile sand washing and screening plants. Manufactured to European standards, our machines exceed industry expectations with their high washing capacity and low maintenance costs. Every plant we produce, backed by years of engineering experience, aims to ensure uninterrupted efficiency in our customers' production processes. Offering portability, quick installation, and high performance, these plants give you maximum flexibility at every stage of your projects. Choose the CONSTMACH brand for quality production, technical support, and reliable service. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput depends heavily on the sieve and source material: - up to 60 kg / h for EPS with a 15 mm sieve *the coarser the sieve, the higher the throughput Motor 9.2 / 11 KW - 400 volts, stable steel construction, hardened cutting blades, sieve with interchangeable inserts, optionally (8), (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optionally for plastic or grain pipes, blow width approx. 12 m, Dwolsh S H T Uohcdw Ded chassis with 2 running wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all Wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Lid €290 each net

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our prefeeder Another machine, available immediately (ex works Neckartailfingen) approx. 24 operating hours. Including: + profile rotor for increased throughput Options: Double row of knives + 895 € net Veneer and paper scraper + 970 € net * Recommended for extremely thin materials with a thickness of less than 3 mm Our mütek MRZ 530 single-shaft shredder shreds a wide variety of materials such as all types of waste wood, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cable, paper, cardboard and plastics. The machine is characterized by its robust design, which guarantees consistent quality in continuous operation. We will be happy to carry out a free test with your material. We invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we can document the test with pictures and videos. Machine data: Motor: 15 kW; 400 V - 50 Hz - 3 ph, Blades: multi-rotatable, Rotor diameter: 260 mm, Control: PLC Siemens S7-1200, Hopper (mm) 510 x 810 mm, Hopper volume approx. 0.4 qbm, throughput 1 - 5 hopper fillings / h, hydraulically operated pusher, Screen perforation of your choice (10 - 40 mm), suction nozzle Ø 160 mm, Weight approx. 1,000 kg, Dimensions approx. 1550 x 1100 x 1640 mm, Moisture content of the raw material: must be below 30 % atro. Included as standard: - Fast hydraulics - Profile rotor - Switch cabinet with Siemens PLC control - Automatic star/delta start Delhjd Db N Iecdw Dswd - Automatic OFF when the rotor is idling - Removable suction chute - Speed 70 - 100 rpm for higher throughput capacity - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Stable guides for the hydraulic slide Other shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Folding conveyor belt +8,770 € net Horizontal part: 1200 mm Rising part: 2500 mm Angle: 0-60 degrees adjustable Discharge height: approx. 2000 mm + - 100 mm - Overbelt magnet + 5.980 € net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) . Requirements for the output or raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. lead to increased wear

Condition: new, Year of construction: 2025, Delivery time approx. 3-4 months MRZ 830 Shredder Custom tariff number: 84659600 Feed opening 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 ph Blades: multi-rotatable Hydraulically operated slider Screen perforation of your choice (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (L x W x H) approx. 2,290 x 1,420 x 1,750 mm Turbo clutch Included as standard: - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, particle board, and MDF, as well as other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) + €2,140 net - Articulated conveyor belt + €8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet + €5,980 net - Conveyor belt and overbelt magnet control + €2,750 net (Start and stop synchronized with the shredder) Dwjled Dgw Uohcdw Djd Raw material requirements: - Moisture content (dry) must be below 30% - Installation temperature: temperature-controlled room at least +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Year of construction: 2023, condition: new, Machine in preproduction machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Dwslhjdv Eu Hecdw Djd Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2025, The ideal machine for shredding both hardwood and softwood. Motor: 15 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40mm, multiple cutting edges (reversible), Rotor diameter: 260 mm, Control: PLC Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated pusher Screen perforation as per choice (12 - 40 mm) Suction port Ø 160 mm Weight: approx. 1,100 kg Dimensions (LxWxH): approx. 1805 x 1118 x 1650 mm Color: blue / grey The following options are available at extra cost: - Raise the shredder by 30 cm (prepared for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net Djlhcowzarcsdw Djwd - Control unit for conveyor belt and overband magnet + €2,750 net (start and stop synchronised with the shredder) Requirements for the raw material: - The moisture content (absolutely dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. result in increased wear. We are pleased to offer you a free test with your material. You are invited to visit us in Neckartailfingen for this purpose. Alternatively, you may send us your material via freight carrier and we will document the test with photos and videos.

Condition: new, Year of construction: 2025, one machine ready produced Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Dwslhcogbkkrjdw Dsd Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear