Condition: ready for operation (used), A total of seven circular metal saws from Kaltenbach and Adige are available. 1) 4x Kaltenbach. 2) 2x Adige SC 425. 3) 1x Kaltenbach. On-site inspection is possible. Hedpswt Tkvofx Andjnr

Year of construction: 1998, condition: ready for operation (used), Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible. Hnsdeyln A Nepfx Andor

Year of construction: 2002, condition: ready for operation (used), Offered is an aluminum miter circular saw. Saw blade diameter: 550mm, power: 4000W, speed: 2800rpm, control: manual with digital display for cutting angle. Equipped with extraction hose, noise protection enclosure. Weight: approx. 750kg, overall dimensions X/Y/Z: approx. 1400mm/1500mm/1900mm. Inspection possible by arrangement. Hsdsy Uyfpspfx Andonr

Year of construction: 2014, condition: ready for operation (used), An automatic Kasto horizontal band saw is available. Cutting diameter: 330mm, Cutting capacity X/Y: 330mm/350mm, Material feed length: 500mm, Min. cut-off length: 10mm, Min. cutting diameter: 10mm, Min. remnant length (automatic mode): 60mm, Cutting speed: 150m/min, Saw blade dimensions X/Y/Z: 5090mm/41mm/1.3mm, Material support height: 700mm. Machine dimensions X/Y/Z: approx. 1350mm/2400mm/1850mm, Weight: approx. 2200kg. Documentation available. An on-site inspection is possible. Expected to be available starting August, 2026. Hsdpfx Aezipfxsndsnr

Year of construction: 1997, condition: ready for operation (used), A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible. Hsdpszka Iyofx Andjnr

Year of construction: 1996, condition: ready for operation (used), A horizontal miter saw Kaltenbach is available. Saw blade dimensions X/Y/Z: 3830mm/27mm/0.9mm, saw blade speed: 100m/min, working height: 700mm, max. cutting range round material: 305mm, max. cutting range square material: 360mm/305mm. Machine dimensions X/Y/Z: approx. 2300mm/1450mm/1650mm, weight: approx. 800kg. An inspection on site is possible. Hnodpfxex Dcaxe Andor

Year of construction: 1991, condition: ready for operation (used), Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible. Hodsyarq Tepfx Andsnr

Condition: ready for operation (used), A vertical cold circular saw Behringer Eisele with material support on the left and right is available. Saw blade dimensions X/Y/Z: 350mm/3mm/40mm, speed: 68rpm, max. cutting capacity for flat material X/Y: 170mm/100mm, max. cutting capacity for square material X/Y: 100mm/100mm, max. cutting diameter: 120mm, machine dimensions X/Y/Z: approx. 1050mm/800mm/2200mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Hnodpfx Anozklfqsdjr

Year of construction: 2013, condition: ready for operation (used), Saw blade dimensions: 41mm x 5100mm, max. cutting diameter: 350mm, dimensions X/Y/Z: 4400mm/1800mm/2000mm, weight: approx. 2400kg. Hnsdpfxjtufcas Andjr

Year of construction: 2005, condition: ready for operation (used), A hydraulically operated high-performance bandsaw with two-column guide and full enclosure. Cutting range: 260×260mm, cutting speed: 20–110m/min (infinitely variable), weight: approx. 1700kg. Machine dimensions: approx. 1800×2200×1600mm. An inspection can be arranged by appointment. Hnedpextpq Ajfx Ander

Year of construction: 2011, condition: ready for operation (used), A fully automatic band saw is offered. Band length: 4240mm, saw band dimensions X/Y/Z: 4240mm/34mm/1.1mm, cutting capacity: approx. 320mm, square cutting capacity X/Y: 320mm/320mm, cutting speed: 15m/min - 100m/min. Equipped with CNC control, fully automatic material feed, hydraulic saw band tensioning, integrated coolant system, chip conveyor, bundle clamping device. Machine weight: approx. 1650kg, machine dimensions X/Y/Z: approx. 2250mm/2100mm/1500mm. Inspection possible by arrangement. Hsdpfsy Taunox Andsnr

Year of construction: 2008, condition: ready for operation (used), A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible. Hodpfx Ajy Nm Umondjnr

Condition: ready for operation (used), Cutting range round 90°/30°: 320mm/250mm, cutting range square 90°/30°: 320mm/240mm, max. profile capacity: 500mm/320mm, max. workpiece height: 320mm, throat depth: 520mm, saw band dimensions X/Y/Z: 4600mm/32mm/1.1mm, band speed: 96m/min. Machine dimensions X/Y/Z: approx. 2200mm/1400mm/1400mm, weight: approx. 800kg. An on-site inspection is possible. Hnjdpew U Uamofx Ander

Condition: used, Year of construction: 1990, serial number 720340 weight 400 kg volt 380 V band length 3400 mm band length min. 3200 mm Hodpfx Ajztfx Nondjnr

Condition: used, Year of construction: 2007, 410 mm 430x410 mm capacity 90 degrees: round 410 mm capacity 90 degrees: flat 700x410 mm 410 mm 500x410 mm 320 mm 320x410 mm dimensions of saw-band 5800x41x1,3 mm total power requirement 5,5 kW Hodpfeztft Tsx Andonr weight of the machine ca. 3.500 kg dimensions of the machine ca. 3500x2800x2000 mm

Year of construction: 2004, condition: ready for operation (used), Wheel diameter: 600mm, working height: 955mm, max. cutting height: 140mm, clearance height: approx. 5mm-300mm, clearance width: max. approx. 650mm, max. saw blade length: 5600mm, saw blade width: 8mm-25mm, max. saw blade thickness: 0.65mm, max. band speed: 1640m/min, conveyor belt speed: 0,5m/min - 5m/min, conveyor belt width: 650mm. Overall length with conveyor belt: 2820mm, overall width: 2550mm, overall height: 1800mm, machine weight: approx. 700kg. Documentation available. Inspection possible by arrangement. Hjdpfxszuktnj Andjnr

Condition: good (used), Year of construction: 1991, functionality: fully functional, saw blade diameter: 400 mm, cutting range round steel at 90°: 145 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 700 kg, Semi automatic circular saw, blade Ø 400 mm new, capacity Ø ca. 145 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, vertical clamp, horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device; dimension 85x110x180 cm, weight ca. 700 kgs Hsdpowp Ipxofx Andjnr

Condition: used, Year of construction: 2007, saw blade diameter 370 mm capacity 90 degrees: flat 200x100 mm Hnjdpfxjzr Rqbj Andor capacity 90 degrees: round 130 mm 34/68 UpM total power requirement 2,6 kW height of material-table 900 mm dimensions of the machine ca. 1335x865x2175 m weight of the machine ca. 430 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Automatic bandsaw AMADA HFA 400 W (Year of manufacture: 2016) Cutting capacity: Round material: diameter 420 mm Square material: 400 x 400 mm Feed length: 5 - 470 mm Multiple feed length: up to 9999 mm Chip conveyor Hnedpfezrz Ahjx Ander Drive power: 5.5 kW Saw blade speed: 15 - 90 m/min, infinitely adjustable Piece counter Weight: 2200 kg *The saw is in very good condition and fully functional.*

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 380 x 250 mm capacity 90 degrees: square 250 x 250 mm capacity 45 degrees: flat 300 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 200 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3770 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight 695 kg dimensions of the machine ca. 1950 x 1300 x 200 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable Hnodexaax Depfx Ander - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, Year of construction: 2026, machine/vehicle number: M-Y 270, functionality: fully functional, operating hours: 818 h, power: 380 kW (516.66 HP), cutting height (max.): 270 mm, cutting width (max.): 270 mm, total height: 900 mm, total length: 1,650 mm, total width: 810 mm, overall weight: 550 kg, table height: 1,500 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Çeyrek yüzyılı aşkın deneyimle, testere endüstrisinde kalite, dayanıklılık ve güvenilirliğin simgesi haline geldik. 25 yıllık uygulamalı uzmanlık ve derin sektör bilgisiyle desteklenen bir şekilde, sadece ürünler sunmakla kalmıyoruz — müşterilerimize uzun ömürlü çözümler sunuyoruz. Hodpfey Akggox Andonr Her bir ürünümüz yüksek performans, hassas kesim ve maksimum verimlilik için tasarlanmıştır. En zorlu koşullarda bile, testere çözümlerimiz kalitesini koruyor ve profesyonellerin ilk tercihi haline geliyor. Gelişen teknolojilere uyum sağlayarak, üretim standartlarımızdan asla ödün vermeden kendimizi sürekli geliştiriyoruz. Çünkü güçlü sonuçların doğru araçlarla başladığına inanıyoruz. Gücümüz deneyimden, keskinliğimiz ise zanaatımıza olan tutkumuzdan gelir.

Condition: new, Year of construction: 2026, operating hours: 818 h, machine/vehicle number: S-MD 315, saw blade diameter: 315 mm, feed length X-axis: 100 mm, feed length Y-axis: 100 mm, feed length Z-axis: 80 mm, sheet thickness aluminum (max.): 100 mm, total height: 100 mm, cutting range round steel at 45°: 80 mm, cutting height (max.): 315 mm, overall weight: 350 kg, input voltage: 380 V, year of last overhaul: 2026, cutting range square steel at 45°: 80 mm, cutting range square steel at 90°: 100 mm, cutting diameter: 315 mm, saw blade bore: 32 mm, power: 380 kW (516.66 HP), Equipment: CE marking, PNEUMATIC DOUBLE VISE PROFILE AND METAL CUTTING MACHINE Hnedpfx Anoy Aw Spodsr

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Hjdpfx Ajzrpl Dondjnr Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: new, Electrical voltage: 400 / 440 V Hnsdpfjd R Uzzsx Ander Frequency: 50 / 60 Hz Number of phases: 3 / 3 phases

Condition: used, Year of construction: 2008, input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, type of input current: AC, We offer this used KALTENBACH KBS 1010 DG bandsaw, manufactured in 2008. Hnedsztxwrspfx Andjr Type: KBS 1010 Serial number: 304027 Year of manufacture: 2008 Operating voltage: 400 V Operating voltage frequency: 50 Hz Control voltage: 24 V DC Valve voltage: 24 V DC Total rated current: 25 A Main fuse: 35 A If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.