Round stick routing machine Löser
Type: RF 412
for even round sticks of 8 – 40 mm diameter
and spiral grooved round stick of 8 – 10 mm diameter
infeed speed stepless 6 – 34 m/min.
shortes workpiece length 400 mm
router motor 5,5 kW
infeed motor 0,55 kW
diameter of connection for dust suction pipe 100 mm
weight approx. 250 kg
Round bar milling machine Wema Probst
- Type: RHM 140-I-H/V
- 18,5 Kw
- 3 cutter head
- knives are new
- production diameter 40 to 140 mm
- there are the following blades with a production diameter of
40/50/60/70/80/90/100/110/120 and 140 mm available
- stepless feed from 4 to 24 m/min
- 3 pairs of feed rollers
- 3 pairs of pull-out rollers
length: 2600 mm
width: 1000 mm
height: 2050 mm
weight: 1800 kg
Operating hours: 561 h
Cutting saw Wema Probst
Type SPS 160
for central ripping of ...
Fully renovated automatic line for rounded poles production.
New electrical system and program , hydraulic system, pneumatic system, sensors, motors. Line is prepared for a long work.
It is possible to produce two types of pointing (4-side,cone). Material can be produced: cut/cut, chamfer/chamfer, point/chamfer. Line is already installed for test and inspection.
By request can be provided videos of full cycle or spare units.
PULL IN CHAIN
FRAZE RM 101 WITH 2 HEAD
AUTOMATIC CAPING AND SETTING
from 40mm-100mm (120mm)
Characteristics of the machine:
Circular milling machine for machining square material
Diameter range: 20 - 80 mm
feed speed: 0 - 36 m/min
shortest workpieces: approx. 100 mm
net weight: approx. 490 kg
gross weight: approx. 550 kg
main motor: 9 kW, 2800 UPM
feed motor: 1,47 kW, 1400 UPM
revolution milling spindle: 2960 UPM, 50 Hz
See operating instructions
I offer a quality log cutter from Bezner.
This is a very well-preserved machine.
There is also a Bezner feeder for Bezner, which was bought directly for that.
The control cabinets are part of these two machines.
All documentation (wiring and drawings) for the machines
This Oswald round bar milling line works fully automatically. The special feature of this plant is that the wood is fed at the infeed conveyor and then the complete processing including packaging is done automatically. The rounding machine can mill woods in the range of 80 to 240 mm. The plant consists of the following machines or conveyors.
Rod milling machine RM243 1403
Pull-out conveyor belt
Cross-cut and chamfering device up to 4,0 m
1100 024 OSWALD palisade plant and cut-off saw for the production of
Palisades: ø 40 - 100 mm, length 500 - 4000 mm, chamfered on one or both sides,
Half palisades: ø 40 - 100 mm, length 500 - 3000 mm, chamfered on one or both sides,
Mini palisades: ø 40 - 60 mm, length 300 mm, chamfered on one side and pointed 90° on one side,
Fence slats: ø 45 - 65 mm, length 750 - 2500 mm, 90" tapered on one side,
2. step separator
3. infeed conveyor belt
4. double head round bar mill...
FOR POLISADE PRODUCTION
PULL IN CHAIN
FRAZE RM 101-1403
PULL-OUT WITH EJECTOR
CROSSCUT ( MISSING MOTOR )
AND SEVERAL TRANSPORTERS
VERY LITTLE USED
- Machine in stock
- After the technical review
- Prepared for work
- Very good condition
TECHNICAL PARAMETERS :
- the range of workpieces 140-240 mm
- max. Diameter of the input material 360 mm
- min length of the material 700 mm
- head speed 2150 rpm
- feed speed adjustable on the geared motor
- feed motor 2,2kW
- 30 kW knife head drive motor
- diameter of the 200 mm exhaust stub
Overall dimensions of the machine:
- length 300 cm
- width 110 cm
- height 200 cm
Automatic Bezner line for rounded poles production.
Rounding machine tool Bezner 50-200 mm
Also half cutter is available to install in line
For more photos and information please contact us.
The rounding machines in design are based on former Oswald princip with a lot of new features. The machines are build modular und can be delivered in different sizes and with different options. The machine is available as single head or double head machine. Depending on the number of heads the machine can work up to 35 m/min, with speed control system even higher. The machines are available as model series with a total range from 30 up to 400 mm.
RM 30 – 120, RM 40 – 160, RM 80 – 200, ...
Hammer handle router / Profiled stick router Cosma
model RF 6
For economic production of straight axis profiled sticks from round,
any oval or square diameter.
Also workpieces of 2 different diameters can be produced
with gradually transition
to round circle at the other end.
The sticks can be cylindric (prismatic), conical or profiled.
Disctance between the centers 600 mm
pneumatic claming of the workpiece
capacity approx. 300 – 600 pieces per hour
motor turning speed 2800 rpm
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this site are subject to change and non-binding!
By using this website, you acknowledge and agree to our Terms & Conditions and Privacy Statement.
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not accept any liability for the content of linked websites.