Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 07900350045, saw blade diameter: 380 mm, total width: 4,500 mm, Double mitre saw Elumatec DG 79, purchased new in Nov. 2006, used, fully functional, pictures attached, purchase invoice with electronic and machine data included. Hodex D Tmpspfx Ag Djfr

Condition: used, Year of construction: 1996, For Sale: Adige TC 720 Tube Cutting Machine + Adige ST 660 Deburring Unit – Year 1996 We are offering for sale an Adige TC 720 automatic tube cutting machine together with the matching Adige ST 660 deburring unit. The machines are from the year 1996, and the complete bar feeder system is included in the package. The bar feeder motor has been replaced and is equipped with a Siemens control system. The package also includes new spare rubber wheels for the material feeding system. Technical Specifications – Adige TC 720: • Cutting capacity (round solid bar): Ø12 – Ø30 mm • Cutting capacity (round tubes): Ø12 – Ø80 mm • Cutting capacity (square profiles): 10 × 10 mm up to 70 × 70 mm • Cutting capacity (rectangular profiles): 15 × 10 mm up to 80 × 70 mm • Minimum cutting length: 50 mm • Maximum cutting length: approx. 3,000 mm (with bar feeder: up to 6,500 mm) • Cutting method: circular saw • Control system: Siemens • Electrical requirements: 400 V / 50 Hz / 3-phase • Power consumption: approx. 10-12 kW • Dimensions: approx. 8000 × 1800 × 2000 mm (L × W × H) • Weight: approx. 2,100 kg Adige ST 660 – Deburring Unit: • For internal and external deburring of cut tubes and profiles • Designed to operate in sync with the TC 720 • Dimensions: approx. 2000 × 800 × 1600 mm • Weight: approx. 1,700 kg Hedewlkiyopfx Ag Dofr Included Accessories: • Complete bar feeder system – Engine replaced – Controlled by Siemens system • New spare rubber drive wheels

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 1500 01025, saw blade diameter: 400 mm, total height: 1,700 mm, total width: 1,100 mm, overall weight: 700 kg, type of input current: three-phase, cutting diameter: 130 mm, space requirement height: 2,000 mm, space requirement length: 900 mm, space requirement width: 1,200 mm, length stop: 6,000 mm, Kaltenbach KKS400E cold circular saw, year of manufacture approx. 1980–1982, fully functional, can be inspected under power. Incl. outfeed roller conveyor with 6000 mm length measuring device. Cutting range at 90°: D130 or 120x120 mm, flat material 315x40 mm. Hfodpfxjwx Nn Io Ag Dor

Condition: good (used), Year of construction: 2009, Cutting Capacity 0° 350 mm Diameter 570 x 260 mm Rectangle 350 mm Square +45° 350 mm Diameter 460 x 180 mm Rectangle 350 mm Square Standard Features Saw Blade 34 Inverter Roller Table Metarial Limit Shaft Hsdjrkz E Hepfx Ag Dofr Securty Switch Control Panel Height Adjustment Switch Hydromechnic Blade Tension Coolant Pump Saw Blade Brash Heavy Duty Gearbox

Condition: good (used), HACKSAW - RUCOCO RSR 500-4 - Saw diameter: 500 mm - Stroke rates: 34-48-60-85 strokes/min - Mitre cutting device - Spare saw blades: 850x75x4 mm - Machine feet - Roller conveyor - Coolant system - Documentation Dimensions: LxWxH: 2.2x1.1x1.5 meters / Weight: 2750 kg Hfedpfx Agjx Dy Sxo Djr Subject to errors and input mistakes.

Condition: new, cutting diameter 250 mm Hfodexz Hhzepfx Ag Djr saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m Hjdpfjxz Dqmsx Ag Dsfr • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2019, cutting diameter 260 mm dimensions of saw-band 2880 x 27 x 0,9 mm cutting speed 15 - 90 m/min 260 mm total power requirement 2,8 kW Hfedpex Dnf Hefx Ag Djr weight of the machine ca. 0,75 t dimensions of the machine ca. 4,0 x 2,0 x 1,5 m Horizontal band saw - Double miter saw - Micro-spraying system - 40,000 mm infeed roller conveyor - 2,000 to 4,000 mm outfeed roller conveyor - Laser cutting indicator

Condition: used, Year of construction: 2000, machine/vehicle number: 0102-250028, Behringer HBP 430- Powerful straight-cutting band saw for precise steel cutting Hjdpfx Agoxzpvhs Defr The Behringer HBP 430 is a semi-automatic horizontal bandsawing machine designed for precise and efficient cuts in steel, cast iron and non-ferrous metals. The longevity of the machine is based, among other things, on the well-known robust double-column guide. The scope of delivery of this mitre bandsaw includes a chip conveyor and a short roller conveyor element with approx. 1000 mm on the outfeed side.

Condition: good (used), Year of construction: 2010, KBS 1051 SAW HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle 2010 KALTENBACH KBS1051 CNC SAWING LINE. 15 METRES INFEED. 12250 mm OUTFEED. INFEED CROSS TRANSFERS. OUTFEED CROSS TRANSFERS. Technical Data: Working range max. [mm] 90° 1050mm x 500mm. + 70° 980mm x 500mm -70° 960mm x 500mm +60° 900mm x 500mm -60° 880mm x 500mm +45° 740mm x 500mm -45° 700mm x 500mm +40° 680mm x 500mm -40° 635mm x 500mm Hjdpfsxmvrgsx Ag Djfr +30° 525mm x 500mm Working range min. [mm] 30mm x 10mm Drive power [kW] 12.9 Cutting speed [m/min] 15 - 150 Saw band feed [mm/min] 0 – 600 Rapid feed and return [mm/min] 6000 Saw band material Bimetal and carbide Saw band dimensions (L x W x H) [mm] 8900 x 1.6 x 54 Saw band inclination Degrees 1,5-10 Machine weight [kg] 6000 Machine dimensions (L x W x H) [mm] 4370 x 1435 x 2650

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device Hodpfxjcuntze Ag Djfr - operating instructions

Condition: good (used), Year of construction: 1987, functionality: fully functional, saw blade diameter: 375 mm, cutting range round steel at 90°: 135 mm, total length: 850 mm, total height: 1,800 mm, total width: 1,100 mm, overall weight: 680 kg, Semi automatic circular saw, blade Ø 375 mm, capacity Ø ca. 135 mm, motor 3,0 / 4,0 kw 2-speed 1420/2880 rpm, hydraulic vertical clamp, 1 horizontal clamp, stops 30°, 45°, 60° 90° double side, coolant device, measuring device 2 meters; dimension 85x110x180 cm, weight ca. 680 kgs Hedpfxex Dl Dme Ag Dsfr

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: Hodpfxsxztfaj Ag Dofr • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2011, Mössner saw SSF520; acquisition cost approximately 100,000 euros. Hsdpjx Dkdrofx Ag Dofr

Condition: used, Year of construction: 2013, functionality: limited functionality, saw blade diameter: 370 mm, cutting height (max.): 100 mm, feed length X-axis: 1,000 mm, total length: 2,450 mm, total height: 1,900 mm, total width: 1,750 mm, overall weight: 1,060 kg, cutting diameter: 100 mm, cutting length (max.): 99,999 mm, working height: 1,000 mm, The machine can be tilted to 45°. Further technical details are provided in the user and maintenance manual, which is included with the sale. If you have any further questions, please feel free to contact us by phone or email. Kind regards, Weber Geländersysteme. Hfedpfsx Di S Usx Ag Djr

Condition: good (used), Capacities: Capacity 360 mm diameter , Rectangular 704 x 360 mm at 90 degrees or 340 mm diameter , Rectangular 400 mm x 340 mm at 45 degrees. Input 415/3/50 4kw approx. Speeds 20-120 meters per min. Swivel frame 0-45 degrees. Vice opens 710 mm. Measuring Head. Hedpfxeig T Abe Ag Djfr Infeed / Outfeed powered rollers. Infeed / Outfeed Cross transfers

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Hfedsi D Dgwepfx Ag Der Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2013, functionality: limited functionality, saw band length: 2,950 mm, saw band width: 27 mm, total height: 1,680 mm, total width: 1,950 mm, feed length Y-axis: 500 mm, cutting width (max.): 245 mm, overall weight: 1,000 kg, cutting height (max.): 230 mm, table width: 245 mm, table length: 2,800 mm, working height: 890 mm, section length (max.): 9,999 mm, space requirement width: 1,950 mm, space requirement length: 2,900 mm, space requirement height: 2,100 mm, empty load weight: 1,000 kg, Further technical details can be found in the operation and maintenance manual, which will be provided upon sale. Hodpfxox Dirzo Ag Djfr If you have any further questions, please feel free to contact us by phone or email. Best regards, Weber Geländersysteme

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal. Hfodpfev U Ea Hsx Ag Djr

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Hfsdpfjudi Unox Ag Dor Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: used, Year of construction: 2012, Maximum bar length..... 15 meters Maximum bar weight..... 300 kg/m Dimensions and profile types Punching 34 tons Shearing 130 tons Minimum Maximum Maximum in shearing IPE 80 200 200 IPN 80 200 200 Angles 35 x 3.5 120 x 12 120 x 12 UPE 80 200 200 UPN 80 200 200 UPAF 80 200 200 Flats 35 x 5 200 x 12 200 x 12 Maximum punching diameter (steel 400 N/mm²)..... Ø 32 mm in 8 mm thickness Maximum diameter in Maximum thickness (400 N/mm² steel) ..... Ø 22 mm in 12 mm thickness Number of punching diameters ..... 1 in the web and on the horizontal flange of the angles Hfjdpfowum Tmjx Ag Dor 1 in the reference flange on the vertical flange of the L and U sections 1 per half reference flange on the flange of the I and H sections

Condition: new, Year of construction: 2025, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Hodpfsi D Ddiex Ag Defr Weight - 370 kg Warranty - 12 months User manual - yes CE declaration - yes Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: reconditioned (used), Year of construction: 2007, Operating range VB750 Min. / max. height 10 – 450 mm Min. / max. width 50 – 750 mm Sawing machine Hjdew Nyu Sopfx Ag Defr Capacity (h x w) 0° 450 x 750 mm Capacity (h x w) +/- 15° 450 x 700 mm Capacity (h x w) +/- 30° 450 x 620 mm Capacity (h x w) +/- 45° 450 x 480 mm Capacity (h x w) +/- 60° 450 x 300 mm

Condition: new, Year of construction: 2025, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Hfjdpow U Skvsfx Ag Der Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, functionality: fully functional, Band saw for metal with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description CORMAK BS 128HDRC band saw for metal with optimal cutting range, designed for professional craftsmen, distinguished by efficiency and easy handling. Arm swivelling in both directions is a very big advantage in angled cutting. Despite small dimensions, its big weight (103 kg) makes it very stable and vibration-free during cutting larger materials. Element cut can be fed manually or via feeding machines. Feed during cutting is gravitational, with oil flow in a two-chamber hydraulic cylinder. Arm lowering control is ensured by a valve controlling oil flow between chambers of cylinder. Straight cut is achieved by a set of bearings guiding the band. Machines are equipped with a limiting switch and ON/OFF switch compliant with IP54. Swivelling saw frame for double bevelling within -45o - + 60o. Technical data Cutting band size 1640×13×0.65 mm Cutting speed 23/34/54 m/min Power 0,55 kW/230V Arm lowering control stepless, through hydraulic cylinder Cutting range -45° - + 60° Dimensions 942×442×548 mm Weight 103 kg Maximum cutting range [mm] Angle 0°.....ø125 mm.....100×150 mm....100×100 mm -45°.....ø90 mm.....90×75 mm.....90×90 mm +45°.....ø90 mm.....90×75 mm.....90×90 mm +60°.....ø55 mm.....55×55 mm.....55×55 mm Default equipment 3rd generation hydraulic cylinder Table for vertical cuts Quick-clamping vice Coolant system Workpiece limiter - bumper Automatic limiting switches Modern thermal engine protection Mobile base with four wheels User manual The price is a net price. Price does not include shipping costs. Hedpfx Ajwq A Dyeg Djfr For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.